N4008018R0008_P163_ACF_Proprietary_Equiopment_list.pdf

Equipment or Instrument Item

Supplier, Make and/or Model Product Description Justification QTY

Detonation Trap, G232

Biazzi SA, IAW Biazzi Drawing Nos. UG-034-2, 1193C054 and 1193C053

Complete assembled trap includes: Special flanged (biazzi style Dwg. No.

UG-034-2) wye fitting (1193C053) with 1 ¼” flanged end splitting to three, ½” pipes with hose barb ends; three, 8-foot long electrically conductive EPDM, 16 Bar pressure rated solvent hoses with helix, and twelve permanent stainless steel clamps; Special barbed wye fitting (1193C054) with 1” hose barb end splitting to three, ½” pipes with hose barb ends and double clamps for connection of 1” hose barb to Polyethylene tubing. All fittings fabricated from Schedule 10, 304 SS piping, and polished to 25 Ra interior finish and 40 Ra exterior finish.

This is a custom-fabricated piece of safety equipment used in the Biazzi nitration process, specifically designed for the flow rates leaving the main nitration process. No other known manufacturer exists and is identical to existing.

Another unit is needed to segregate product lines.

Saunders HC4 Aseptic diaphragm valves: 316L SS Body, 25Ra Finish, Flange End or butt welded connections, PTFE/EPM Diaphragm, Bonnet/Actuator , Weep Hole, No Blind Threaded Holes on Body.

1/2" 1 3/4" 1 1" 6

Saunders HC4

Aseptic diaphragm valves: 316L SS Body, 25Ra Finish,compressed air Piston Actuator with spring return, Flange End or butt welded connections, PTFE/EPM Diaphragm, Weep Hole, No Blind Threaded Holes on Body.

3/4" 2 1" 7 1.5" 2 4" 2

Worcester, 94-series (standard porting) 95-series (full porting)

Low leakage ball valve. High Cycle Ball Valve with SS Body, FLG Ends, Ball & Stem, Teflon Seats and Cavity Seals, Live Loaded Dual Graphite Stem Packing, Grounded Blowout Proof Stem, No Blind Threaded Holes on Body, lever handle.

1/2" 7 3/4" 7 1" 11 1.5" 21 2" 17 3" 7 4" 2

Worcester, 94-series (standard porting) 95-series (full porting) with F39 pneumatic actuators

Low leakage ball valve. High Cycle Ball Valve with SS Body, FLG Ends, Ball & Stem, Teflon Seats and Cavity Seals, Live Loaded Dual Graphite Stem Packing, Grounded Blowout Proof Stem, No Blind Threaded Holes on Body. Actuator w/bracket, No Solenoid.

1/2" 7 3/4" 1 1" 4 1.5" 4

P163 - AGILE CHEMICAL FACILITY PHASE 3

PROPRIETARY EQUIPMENT LIST

Ball Valves (Manual)

See below for Actuated Valves.

Ball Valves (Actuated)

Standardizes the majority of the actuated ON/OFF ball valves used in the ACF to a single manufacturer, which reduces spare parts inventory and maintenance costs associated with this valve type.

Diaphragm Valves (Manual)

See below for Actuated Valves.

Diaphragm Valves (Actuated)

Standardizes the diaphragm valves used in the ACF to a single product line, which reduces spare parts inventory and maintenance costs associated with this valve type.

Instrument Item

Supplier, Make and/or Model Product Description Justification QTY

P163 - AGILE CHEMICAL FACILITY PHASE 3

PROPRIETARY EQUIPMENT LIST

2" 13 3" 4 4" 1

Conductivity Level Sensor Biazzi SA, #UG-050/058

Conductivity Level Sensor and transmitter

(Transmitter = Pepperl+Fuchs KFD2-ER-

Ex1.W.LB)

Conductivity Level Probe/Switch, Rod type Probe, Inactive length = 10", Active Probe Length = 0.4", 0.15" 316L rod, with PTFE tube insulation, Process Connection = Ø6mm through special fitting, Wire connection 1 cable, Transmitter = Pepperl+Fuchs KFD2-ER-Ex1.W.LB

This is a custom-designed and fabricated piece of equipment used in the Biazzi nitration and related processes. No other known manufacturer exists.

Siemens AG, Hardware Components

INCLUDES THE FOLLOWING COMPONENTS:

6AV2124-0GC13-0AX0 Siemens TP700 Outdoor Comfort Panel 1

6AG1503-3CB00-2AA0 SIPLUS NET OLM/G12 V4.0 -25 ... +60 DEGREES C BASED ON 6GK1503-

3CB00

6ES7153-2AR04-0XA0 ET200M redundancy bundle: 2 IM153-2 HF + bus module IM/IM 8

6EP1336-3BA00 POWER SUPPLY SITOP-115VAC / 24VDC / 20AMP 8

6EP1961-3BA20 REDUNDANCY MODULE 24VDC 4

6EP1961-3BA10 SIGNALING CONTACT MODULE 8

6ES71971LA120XA0 Complete Y-Link Package 3 6ES7195-7HB00-0XA0 Active bus module for 2 modules 40mm wide 23 6ES7321-1BH02-0AA0 Digital input, isolated, 16 DI, DC 24V 18 6ES7322-1HH01-0AA0 Relay output module DO 16 x Rel. AC 120/230 V 3 6ES7322-1BH01-0AA0 Digital output 16 DO, 24 V DC, 0.5 A; isolated 2

6ES7331-7TF01-0AB0 AI 8-CH ANALOG INPUT MODULE - HART 11

6ES7332-8TF01-0AB0 SM 332; AO 8-CH ANALOG OUTPUT MODULE - HART 3

6ES7326-1BK02-0AB0 Digital input 24DI, 24V DC; diagnose, fail-safe 4 6ES7326-2BF10-0AB0 Digital output, 10DO, DC 24V/2A PP; diagnose, FS 3 6ES7195-7HC00-0XA0 Active bus module for 1 module 80 mm wide 4 6ES7392-1AM00-0AA0 Front connector, 40-pole, with screw contact 4 6ES7392-1AJ00-0AA0 Front connector, 20-pole, with screw cont 42 6ES7390-1AE80-0AA0 Simatic S7-300 rail 480mm 4

6ES7 195-1AF30-0AA0 SIMATIC S7-300, RAIL L=530MM 4

PLC System Components

Ensures compatibility with facility-wide process control system (PCS) that was previously installed and programmed. Using other components jeopardizes viability of existing PCS.

Instrument Item

Supplier, Make and/or Model Product Description Justification QTY

P163 - AGILE CHEMICAL FACILITY PHASE 3

PROPRIETARY EQUIPMENT LIST

6ES76607CA083BA2

SIMATIC PCS 7 INDUSTRIAL WORKSTATION IPC547G (RACK PC, 19",

4U), Interfaces : 2x Gbit Ethernet (RJ45); 1x DVI-D; 2x Display Port V1.2 (RACK PC, 19", 4U), Interfaces : 2x Gbit Ethernet (RJ45); 1x COM; 2x PS/2; Audio; 2x USB 3.0 front, 4x USB 3.0 & 4x USB 2.0 rear, 1x USB 2.0 internal, 7 expansion slots: 5x PCI-Express, 2x PCI; temperature and fan control; watchdog; card retainer Core i5-6500 (4C/4T, 3,2 (3,6) GHz, 6 MB Cache); MB (Chipset C236) - OS Client 1x1 TB HDD, internally mounted (0.2g vibration, 1g shock); 4 GB DDR4 SDRAM (1x 4 GB), Single Channel; without additional Plantbus communication cards PCS 7 V9.0 pre-installed Windows 10 IoT Enterprise 2015 LTSB, 64 bit, MUI (en, ge, fr, it, sp, ch) Housing blue chromated, w/o exchangeable media, incl.

1xDP to DVI-D Adapter Cable 100/240V AC industrial power supply; PS cord USA

6ES76481AA000XC0

TOWER- KIT, FOR CONVERSION OF RACK PC IN INDUSTRY TOWER PC,

FOR SIMATIC IPC547E, IPC547D, IPC547C, RACK PC 547B, RACK PC IL

6ES76480CB000YA0

USB KEYBOARD GER/INT USB INTERFACE FOR DEVICES WITH

SUITABLE CONNECTOR

6AV21818AT000AX0 SIMATIC USB MOUSE FOR SIMATIC HMI PANEL, PG AND IPC 1

6ES7322-1BF01-0AA0 Digital output 8 DO, 24 V DC, 2 A 2

Upgrade Existing Siemens Software

INCLUDES THE FOLLOWING COMPONENTS:

6ES76525BX580YE0 PCS 7 UG PACK OS SERVER V8.X -> V9.0 2

6ES76525CX580YF5 PCS 7 UG CLIENT SFC VISU V8.X->V9.0 2

6ES76515AX580YE5 PCS 7 UG PACKAGE ENGINEERING V8.X->V9.0 1

6ES76515EX580YE5 PDM Upgrade Package basic from V8.X to V9.0 1

6ES76583XD002YH5 PDM, SOFTWARE, 100 TAG, FLOATING LICENSE F.1 USER, E-SW, OHNE

SW, OHNE DOKU., LICENSE KEY DOWNLOAD

6ES76582CX580YB5 PCS 7 OS SOFTWARE CLIENT V9.0 2

6AV21010AA030AH5 SIMATIC WINCC COMFORT V13 DL Configuration Software 1

Endress & Hauser, Various

Temperature Indication

TH14 Temperature transmitter, 4-20mA HART, FM/IS Cert., Alum housing w/illum display, 2x 1/2" NPT cable entry, no mounting bracket, RTD 3-wire, Pt100, HART cut expanded config, standard NA model, 2x sensor input (back-up), tag number to be etched in housing, RTD thermowell assembly, 6" ins length, 1" SST 150#RF flanged process connection, straight (std) well, no lag, nipple-union-nipple SST ext (1"), 2 Pt100 3-wire RTD's, SST housing w/.5" NPT cable entry, TMT162 FN/IS dual comp elec connection, fact cal cert, std NA model

Instrumentation

This vendor's instrumentation has been previously installed in numerous facility locations. Continued use within proposed facility minimizes the amount of vendor documentation that must be maintained. Minimizing the number of instrumentation vendors also reduces warehousing, training and maintenance costs.

Ensures compatibility with facility-wide process control system (PCS) that was previously installed and programmed. Using other components jeopardizes viability of existing PCS.

PLC System Software

Instrument Item

Supplier, Make and/or Model Product Description Justification QTY

P163 - AGILE CHEMICAL FACILITY PHASE 3

PROPRIETARY EQUIPMENT LIST

Level Indication (Radar)

FMR52 Level Transmitter, radar, contactless. Approval: FM XP Cl.I,II,III Div.1 Gr.A-G, AEx d, NI Cl.1 Div.2, Power Supply: 4-wire 10.4-48VDC;

Output: 4- 20mA HART, Display, Operation: SD02 4-line, push buttons + data backup function, Housing: GT20 Dual compartment, Alu, coated, Electrical Connection: Thread NPT1/2, IP66/68 NEMA4X/6P, Antenna:

Horn 80mm/3", -40...200oC/-40...392oF, flush mount, Process Connection:NPS 4" Cl.150, PTFE>316/316L flange ASME B16.5, English Language. Tag plate Stainless Steel

Level Switch (Vibronic)

FTL51, Point level switch, vibronic, Approval: FM XP Cl.I,II,III Div.1 Gr.B- G, Probe Length L1 : Custom, Process Connection: 1.5" 150# RFWN 316L SS, Electronics Output: FEL54 Relay DPDT, (AC 19 to 253 V, DC 19 to 55 V); Housing: Aluminum NEMA4X, Cable Entry: Thread NPT 3/4"

Level Switch (Conductivity)

FTW31,Conductivity Level Probes, 3 Rods (1 Spare), 18" Length Rods, 1 1/2" NPT, 1/2 Electrical Entry. Mount on Sump wall w/ Field Fab'd. SS Brackets.

Flow Indication (Lined Electromanetic)

53P32, Inline Electromagnetic Flowmeter, PFA Liner, 1.25" process connection, 1.4435/316L electrodes, 0.2% calibration, w/o test certificate, Approval: FM NI Cl. I Div.2, Wall mount aluminum NEMA 4X housing, 30 ft signal cable, 1/2" NPT cable entry, 20-55VAC / 16-62VDC, WEA, 4-line + Touch control power supply and display, Output: 4-20mA SIL HART + frequency SS Mounted Tag.

Flow Indication (Electromanetic)

Promag P 200 Inline Electromagnetic Flowmeter, Approval: CSA C/US NI Cl.I Div.2 Gr. ABCD, Output: 4-20mA HART, pulse/freq./switch, Display:

SD02 4-line; push buttons + data backup function, Housing: GT20 dual compartment, alu, coated, Electrical Connection: Threaded NPT 1/2", Liner: PFA, Electrodes: 1.4435/316L, Calibration Flow: 0.5%, SS Mounted Tag.

Pressure Indication

PMP, Gage Pressure Transmitter: Approval: FM IS, Class I, II, III Division 1, Groups A – G; NI Class I Division 2, Groups A – D; AEx ia, Output: 4 to 20 mA HART, operation inside, LCD, Housing: Aluminum T14 housing, optional display on the side, IP 66/67/NEMA 4X/ 6P, Thread 1/2 NPT, Range: 0-150 PSIA, 600 psi overpressure limit, Calibration: Sensor Range (psi), Diaphragm: 316L SS, Process Connection: 1" - 150# Flange, Silicone Fill, SS Tag w/ID #

Pepperl & Fuchs, Various with K System

Isolation Barriers listed in Section 4.7.6 of P163

Basis of Design

INCLUDES THE FOLLOWING:COMPONENTS:

KFD2-SR2-Ex2.W 24VDC Digital Input IS Barrier (2 channel) 31

Instrumentation

This vendor’s instrumentation has been previously installed in numerous facility locations. Continued use within proposed facility minimizes the amount of vendor documentation that must be maintained. Minimizing the number of instrumentation vendors also reduces warehousing, training and maintenance costs.

Instrument Item

Supplier, Make and/or Model Product Description Justification QTY

P163 - AGILE CHEMICAL FACILITY PHASE 3

PROPRIETARY EQUIPMENT LIST

KFD2-STC4-Ex2 Analog Input IS Barrier (2 channel) 10 KFD2-CD-Ex1.32 Analog Output IS Barrier (1 channel) 4

KFD2-ER-Ex1.W.LB Conductivity Level Switch IS Barrier (1 channel) 20 KFD2-EB2.R4A.B Power Rail Power Feed Module 2

Z728.H Zener Barrier (Field Device power IS Barrier) 5 UPR-03 Universal Power Rail 1

Instrument Components

MTS Level Transmitter

Magnetostrictive Liquid-Level Sensor, 4-20 mA analog output with HART technology, FM approval, single cavity explosion-proof and intrinsically safe, integral electronics, sanitary drain-in-place no hole transmitter pipe, electropolished 316L stainless steel Ra 15 wetted components, 3/4" NTP adjustable process fitting, 46" rod length.

This vendor’s instrumentation has been previously installed in numerous facility locations. Continued use within proposed facility minimizes the amount of vendor documentation that must be maintained. Minimizing the number of instrumentation vendors also reduces warehousing, training and maintenance costs.

Instrument Components

Magnetrol flow switch for pump protection

(Sensor: TEC-A230-009;

Sw: TG1-120D-2A0)

Thermodynamic Type Sensor, 1" SS Seal-Welded 150# RF Flange, 9" Insertion Length. Remote Mtg'd Sw. 24VDC w/2A SPDT Relay, Intrinsically Safe, Factory Calibrated

This vendor’s instrumentation has been previously installed in numerous facility locations. Continued use within proposed facility minimizes the amount of vendor documentation that must be maintained. Minimizing the number of instrumentation vendors also reduces warehousing, training and maintenance costs.

Instrument Components

Probe:M4Knick - SE554, Holder: M4Knick - CSR

3600-M-A-N15-1-2-200, Transmitter: E&H - CM42-

MPC011EAE00

Probe: Combination pH/Temperature Sensor, Memosens Digital Galss, 120 mm lenght, 12 mm diameter, memosens screw plug head with PG13.5 Thresd, ATEX: II1 GEx ia IIC T3/T4/T6 cable connection. Holder:

0-36" insetion length, stainless steel wetted material, EPDM oring, 1 1/2" MNPT process connection without integral ball valve. Transmitter:

luiquid analysis multiparameter, loop -powered, digital memosense pH, (Glass) ORP input protocol, FM ISNICI<I Div. 1&2, Groups A-D approval, certificate with factory calibration, 4-20 mA HART Output, SS housing, 1/2" NPT cable entry.

This vendor’s instrumentation has been previously installed in numerous facility locations. Continued use within proposed facility minimizes the amount of vendor documentation that must be maintained. Minimizing the number of instrumentation vendors also reduces warehousing, training and maintenance costs.

CyboSoft pH Control Software and Training. INCLUDES THE FOLLOWING COMPONENTS:

CWP-100HP

CyboCon Lite Professional Edition Model-Free Adaptive Control Package.

Three SISO MFA Controllers with Standard MFA Controller, MFA Turbo Controller, MFA Sharp Controller, Feedforward MFA Control, Nonlinear MFA Control, MFA pH Control, Time Varying MFA Control, Anti-delay MFA pH Control, Robust MFA Control, Flex Phase MFA Control, and Trim Control capabilities. Include one year phone, fax and email technical support starting at date of beneficial occupancy.

IWP-300 CyboLink OPC Client Interface, Real-time OPC Client to interface CyboBase to all OPC servers.

PLC Software Component

Justification for this proprietary software: 1.

CyboSoft is the leader in this technology and is the only company that can provide the software,

2. NSWC has successfully utilized similar products from CyboSoft for similar processes, 3.

The software improves the operation of the neutralization process preventing potential process upsets and lost production, and 4. NSWC is familiar with the Software so additional personnel training would be minimized.

Instrument Item

Supplier, Make and/or Model Product Description Justification QTY

P163 - AGILE CHEMICAL FACILITY PHASE 3

PROPRIETARY EQUIPMENT LIST

CM-PH-01 Process Modeling - Developer's Package: Real-Time pH Process Modeling and Control Simulation Software, Developer's Pack.

CM-OH-02

Activation Key: Real-Time pH Process Modeling and Control Simulation Package, Run-Time License. Activation Softkey for one PC -sent via E-Mail.

ACT-02

Training: Provide up to two days special advanced training for pH control at CyboSoft Headquarters in Rancho Cordova, California, USA for up to 2 people.

INCLUDES THE FOLLOWING COMPONENTS:

S-208: 80 gallon atmospheric Post separator with evacuation pot for spent acid, covers and sight glass including : 1 manual draining valve, 1 overflow recycling piston, level and temperature instruments, 316 Stainless Steel Sanitary Construction.

S-510, Cyclone for static separator tank including level element, 10-ich diameter, 25-inches tall, conical bottom, flanged inlets (2), outlets and overflow connections, flanged hose barb inlet pieces (2), poly propylene cover, 316 Stainless Steel Sanitary Construction.

S-511, NE separator tank including : 1 pneumatic valve, 1 manual draining valve, 7 level elements and 1 temperature element, 400 gallon capacity, 80 inches long X 48 inches wide with sloping semicircular bottom, internal overflow, 316 Stainless Steel Sanitary Construction.

T-512, Dryer tank including : 3 pneumatic valves, 1 manual draining valve, 2 level elements and 2 temperature elements, 1-inch hot water sprial baffled jacket, 400-Gallon Capacity, capillay sampler, compressed air agitation ring, 316 Stainless Steel Sanitary Construction.

S-513, Scrubber for exhaust gas, 10 inch diameter, 70-inches tangent to tangent, 40 SCFM, 316 Stainless Steel Sanitary Construction.

PS-513, Gas ejector, 3-inch diameter, 400 cfm motive air, 40 cfm suction, 316 Stainless Steel Sanitary Construction.

B-513, Gas blower including motor, 400 scfm, 30 inch W.G. 1 Explosion Proof Camera

PELCO Explosion proof, closed circuit video camera.

Individual cameras are being added to an existing system. Cameras match the existing installed equipment minimizing the number of instrumentation vendors also reduces warehousing, training and maintenance costs

Biazzi has familiarity with the manufacturing of equipment for Nitrate Ester processing.

Purchasing equipment from Biazzi provides the following benefits: 1. Previous experience with this vendor has resulted in high quality equipment, 2. Vendor has familiarity with equipment which will minimize the procurement time and effort. Shop drawing approval times will be minimized. 3. Equipment performance and safety functions have been proven at other facilities.

Biazzi Equipment Biazzi SA, Separator S- 208, Cyclone S-510, NE Separator Tank S-511, NE Dryer Tank T-512, Scrubber S-513, Eductor PS-513, Blower B-513

Instrument Item

Supplier, Make and/or Model Product Description Justification QTY

P163 - AGILE CHEMICAL FACILITY PHASE 3

PROPRIETARY EQUIPMENT LIST

Motor Control Centers

Square D/Schneider Electric Model 6 with Profibus.

This device is a replacement for existing equipment. The unit is supplied to match the vendor’s cabinet enclosure dimensions. Other manufacturer’s equipment would require an entire changeout of the MCC cabinetry in order to fit at a significantly higher cost. Model 6 with Profibus.

Fire Alarm Transmitter

MONACO BT-XF Fire Alarm/Energy Meter Radio Transmitter

This alarm transmitter system is a base standard used at all buildings. Continued use within proposed facility minimizes the amount of vendor documentation that must be maintained.

Minimizing the number of fire alarm transmitter vendors also reduces warehousing, training and maintenance costs. These units are also approved by the US Joint Services Hazards of Electromagnetic Radiation to Ordnance (HERO) Safety Test Procedures.

Goulds (Geiger Pump & Equipment)

3296 EZMAG

Hroizontal end suction, close or flex coupled, magnetically driven sealless, stainless steel centrifugal pump with wireless pump sensors (temperature/vibration for pump and motor), Group S

INCLUDES THE FOLLOWING COMPONENTS:

Heat Trace Wire, end seals and miscellaneous equipment 10300 LF

Control Panels/Controllers, 18 circuits, intelligent controls with alarms 4

Thermostat, NEMA 4X 6 Line Sensing Element 2 Ambient Sensing Element 5 EST Type 925 Packaged Scrubber System, including: 1 A.1 Educator-Venturi Scrubber, Type 910, 12", 316 SS. The scrubber will have an EST Spray Nozzle, 316 SS.

Existing pumps within the plant were provided by and are supported by Goulds. The P163 project provide new pumps with component parts that are identical to existing pumps.

Continued used of Goulds pumps minimizes the Existing heat trace systems within the plant are provided by and supported by Chromalox. The P163 project provides additional circuits.

Continued use within proposed facility minimizes the amount of vendor documentation that must be maintained. Minimizing the number of heat trace vendors also reduces warehousing, t i i d i t t

Chromalox

This system replaces existing equipment from the same vendor but with a higher volume capacity capability. Unit will be installed on an existing pad and under existing canopy. Other

Acid Scrubber Severn Trent Services EST/De Nora Water Technologies

Chemical pumps

Heat Trace Systems

Instrument Item

Supplier, Make and/or Model Product Description Justification QTY

P163 - AGILE CHEMICAL FACILITY PHASE 3

PROPRIETARY EQUIPMENT LIST

A.2 Separator, Type 942, 54" diameter tank, 316 SS. The separator will have a 24” mist eliminator pad, 316 SS. The separator will have a storage capacity of 750 gallons.

- Level Gauge, and two (2) shut off valves Tag No.: LGS601, HV 1784-7, HV 1784-8

- Nozzles: Overflow, drain valve, and inspection port Tag No.: HV 1784-

- pH probe and transmitter/controller Tag No.: AE S601, AI S601

- conductivity probe and transmitter/controller Tag No.: CE S601, CI S601

- Temperature Indicator Tag No.: TI S601

- Pump valve

- Level switches A.3 Horizontal-Mounted Centrifugal Circulation Pump

- 316 ss construction

- Pump, 1-1/2 x 1 x 8, 124 GPM @ 140 Feet TDH estimated operating point Tag No.: P-608

- 15 HP 3600 RPM, 480 VAC, 60 HZ, 3 phase TEFC motor

- Tag No.: ES P608 A.4 One (1) Set of recirculation piping and, 3", 316 SS, including

- pressure gauge assembly, 0-60 PSIG, 316 SS with diaphragm protector and 3/4 inch shut-off valve, Tag No.: PI P608

- one (1) pump isolation valves Tag No.: HV-1784-3, HV-1784-9, HV-

1784-5, HV-1784-6

- ½ inch recycle (purge) line with: solenoid valve, ½ inch, two-way, normally-closed, stainless steel construction

- Low flow switch, Tag No.: FSL P608 A.5 System base plate, 7’-0” x 7’-6” epoxy coated steel.

A.6 Relay-Based Local Control Panel

- NEMA 4X 316 SS construction

- Main disconnect switch (fusible disconnect or circuit breaker) Pump motor starter

- Control circuit transformer for downgrading the 480 VAC, 60 HZ, 3 phase incoming supply power to 120 VAC, 60 HZ, 1 phase control circuit supply power

- Necessary interface relays

- 480 VAC, 60 HZ, 3 phase, 20-ampere service supply requirement

- Start/Stop hand switch

- Scrubber, Hand/Off/Auto Switch

- “TAL”, “AAL”, “ FSL” Alarm Lights available equipment would require modifications to the existing pad, containment area and canopy.

Sheet1