N39040Q6036V238 Attachment 6_DWG_2block_PT_areas.pdf

This is a technical drawing (Drawing 2) from document 149D155 Rev L that provides dimensional specifications and design details for a component or assembly. The drawing illustrates a side-view schematic with two primary colored/shaded areas (shown in purple) that require evaluation per Note 2 of the referenced drawing 149D155 Rev L. The overall width dimensions are specified as 18.06 inches (maximum) and 17.94 inches (minimum), with a total height of 3.68 inches (maximum) and 3.64 inches (minimum). Additional dimensional callouts include measurements of 2.02/1.98 inches, 1.01/.99 inches, and 1.00/.94 inches for various features, with a 7/8-inch minimum specification noted for one section.

The drawing includes a series of eight evenly-spaced circular hole locations across the component length and specifies a 1/8-inch minimum dimension for a bottom feature. The note at the top of the drawing states that colored/shaded areas are to be evaluated per Note 2 of Drawing 149D155 Rev L, and that any indications outside of the colored/shaded areas may be ignored. This technical drawing serves as a specification document for manufacturing, inspection, or evaluation purposes and would typically be referenced in procurement documents or engineering requirements for the production of the component depicted.