N3904027Q5950 REV 1 EXHIBIT E_Redacted.pdf

PDF 241 KB Posted

Attached to
Calibrate PAMAS SBSS
Solicitation number
N3904027Q5950
Issued by

About this file

This document is a Contract Data Requirements List (DD Form 1423) for the PAMAS SBSS system, containing two data item requirements for a federal contract.

The first data item (001) is a Calibration Certificate/Report required by the PAMAS PARTIKELMESS - UND ANALYSESYSTEME contractor. It is referenced in Statement of Work Paragraph 3.3 and must be submitted to the requiring office C134. The calibration must be completed with the initial submission no later than five (5) days after calibration. Subsequent calibrations shall be submitted no later than five (5) days after completion. Distribution shall be made electronically to the Primary and Alternate Contracting Officer Representatives listed in the contract's Government Contract Administration Points-of-Contact and Responsibilities section, with hard copies provided to PNSDETSD C134 upon return of equipment post-calibration. The second data item (002) is a Condition Found Report referenced in Statement of Work Paragraph 3.2, also submitted to C134. This report requires contractor authorization before work is performed and must be provided within five (5) business days of identification, with any revisions submitted within three (3) business days. Unscheduled repairs identified during the calibration process shall be reported no later than two (2) days after identification. Distribution follows the same electronic and hard copy procedures as the first data item. Both requirements are categorized as "Other" under C. Category, with distribution to both C134 and C420.

View the file

Other files

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

File details come from the government source that posted it. Updated .