N3904026Q5200_ Attachment 1.pdf
PDF 314 KB Posted
- Solicitation number
- N3904026Q5200
About this file
This is a continuation sheet for a solicitation (N3904026Q5200) that specifies technical requirements for power pack equipment. The document details the procurement of three (3) Power Packs, MAXPRO Technologies Model MTPP15-W-PP111-HL-N-G-2V-RD, designed for water service applications. Each unit must include an air-driven pump with hand lever (1:130 ratio, polyurethane seals and Buna-N O-rings), drive air inlet filter, panel-mounted air regulator with 2.5-inch diameter pressure gauge (0–160 PSIG), and a stainless steel portable base plate with handle and vertical control panel that includes storage for the pump drive handle.
The power pack must incorporate a Heise 6-inch precision pressure gauge (0–15,000 PSI with 9/16"-18 female back connection) featuring ±0.1% full scale accuracy and a signed certificate of conformance, a 2,500–25,000 PSIG adjustable relief valve, 35,000 PSIG rated Maximator brand isolation and vent valves, and 65,000 PSIG rated Maximator brand fittings and tubing. The system is designed for a maximum outlet pressure of 15,000 PSIG with specific connection requirements: 0.5-inch FNPT drive air inlet and water inlet, 0.25-inch high-pressure coned and threaded connection for outlet, and 0.25-inch FNPT vent outlet. All components must be pre-plumbed, mounted, and tested prior to shipment. The system can operate with either compressed air drive or manual hand lever operation without requiring any modifications. Anticipated system dimensions are 20" W × 10" D × 16" H.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| N3904026Q5200_ RFQ Rev2.pdf | ||
| N3904026Q5200_ RFQ.pdf | ||
| N3904026Q5200_ Attachment 2.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REQ DOC NO. -
CONTINUATION SHEET
5333V265 ATTACHMENT _1
SOLICITATION NO. – N3904026Q5200 PAGE 1 OF 2
NAME OF OFFER OR/CONTRACTOR
0001 POWER PACK 3 EA
C. DESCRIPTION/SPECIFICATIONS
C.1 POWER PACK: MAXPRO TECHNOLOGIES MODEL MTPP15-W-PP111-
HL-N-G-2V-RD.
C.2 THE POWER PACK IS DESIGNED FOR WATER SERVICE AND INCLUDE
THE FOLLOWING:
C.2.1 PP111S-HL AIR DRIVEN PUMP WITH HAND LEVER, 1:130 RATIO,
POLYURETHANE SEALS & BUNA-N O-RINGS
C.2.2 DRIVE AIR INLET FILTER
C.2.3 PANEL MOUNTED AIR REGULATOR AND 2.5 INCH DIA, 0 – 160
PSIG PRESSURE GAUGE
C.2.4 STAINLESS STEEL PORTABLE BASE PLATE WITH HANDLE AND
VERTICAL CONTROL PANEL. THE SYSTEM FRAME WILL INCLUDE
STORAGE FOR THE PUMP DRIVE HANDLE.
C.2.5 HEISE 6 INCH CM PRECISION PRESSURE GAUGE, 0 – 15,000 PSI
WITH 9/16”-18 FEMALE BACK CONNECTION. PANEL MOUNT, SLOKD
FRONT, BLOW OUT BACK, WITH HIGH AND LOW PRESSURE LIMIT
STOP AND SLOTTER LINK TO PROTECT MOVEMENT. MIRROR BAND
DIAL, + 0.1% FULL SCALE ACCURACY, WITH SIGNED CERTIFICATE OF
CONFORMANCE.
C.2.6 2,500 – 25,000 PSIG ADJUSTABLE RELIEF VALVE, MOUNTED
VERTICALLY.
ITEM # SUPPLIES/SERVICES QTY U/I
C.2.7 35,000 PSIG RATED MAXIMATORTM BRAND ISOLATION & VENT
VALVES
C.2.8 65,000 PSIG RATED MAXIMATORTM BRAND FITTINGS & TUBING
FOR THE HIGH PRESSURE PLUMBING.
C.3 THE SYSTEM IS DESIGNED FOR 15,000 PSIG MAXIMUM OUTLET
PRESSURE AND WILL HAVE THE FOLLOWING CONNECTIONS
C.3.1 DRIVE AIR INLET: ONE-HALF-INCH (0.5”) FNPT
C.3.2 WATER INLET: ONE-HALF-INCH (0.5”) FNPT
C.3.3 HIGH PRESSURE OUTLET: ONE-QUARTER-INCH (0.25”) HIGH-
PRESSURE CONED AND THREADED CONNECTION
C.3.4 VENT OUTLET: ONE-QUARTER-INCH (0.25”) FNPT
C.4 NO OTHER UTILITIES ARE REQUIRED. UNIT CAN BE OPERATED WITH
EITHER COMPRESSED AIR DRIVE, OR MANUAL HAND LEVER
OPERATION. NO CHANGES ARE REQUIRED TO SWITCH BETWEEN
THE TWO MODES OF OPERATION. ALL COMPONENTS WILL BE PRE-
PLUMBED AND MOUNTED ON THE HANDLE AND BASE PLATE, AND
TESTED PRIOR TO SHIPMENT. TO ACCOMMODATE ALL THE NEW
PANEL MOUNTED EQUIPMENT, THE ANTICIPATED SYSTEM
DIMENSIONS WILL BE 20” W X 10” D X16” H.
File details come from the government source that posted it. Updated .