Lathe_Removal_Q_A.pdf
PDF 374 KB Posted
- Attached to
- Manual Lathes Dismantle and Removal for Pearl Harbor Naval Shipyard & Intermediate Maintenance Facility
- Solicitation number
- N32253-24-Q-0043
About this file
This document is a Questions and Answers (Q&A) document related to Solicitation No. N32253-24-Q-0043 for the Dismantle and Removal of Vertical Turret Lathes at the Pearl Harbor Naval Shipyard & Intermediate Maintenance Facility (PHNSY & IMF).
The solicitation seeks a contractor to dismantle and remove three Vertical Turret Lathes (VTLs), one Computed Numerical Control (CNC) lathe, and two manual lathes located in Building 67. The desired outcome is to clear shop space to allow PHNSY & IMF to install new equipment. This is an above-and-beyond requirement for PHNSY & IMF's current in-house capabilities. The solicitation is a firm-fixed-price 100% small business set-aside contract, with the award going to the most responsible small business that can meet the technical requirements and offer a fair and reasonable price. The tentative Period of Performance is June 3, 2024 to December 13, 2024. Quotes are due by May 17, 2024. Offerors must demonstrate technical capability through a detailed proposal and complete required federal contracting forms. Travel and material costs shall be included in the price.
View the file
Other files
Show all 11
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Solicitation No. N32253-24-Q-0043., Dismantle and Removal of Vertical Turret Lathes
Questions and Answers
Q ue s.
Reference (para/page #, etc.)
Question Government Response
1 General question Do any of the machines protrude into the ground, and if so, how far down?
Machines are above ground.
2 General question How tall is the door access to the shop? The height of the bay door is 18ft by 18ft wide
3 General question Can you provide a floor plan of the working space in the shop near these machines? Upon award, a floor plan can be provided.
4 General question What are the manufacturing years of each machine? CNC lathe manufactured in 1992, WCI Machine and Bourn & Koch lathes manufactured in 1970
5 Cite Visit Will a site visit be made available? Site Visit is scheduled for 05/06/2024 see “Site Visit Information” for more detail and RSVP information.
6 3.10 & 3.8 Do these Lathes have to be demilitarized/destroyed? No, the machines shall be dismantled and palletized as seen in section 3.10 & 3.8 of the Solicitation
7 2.1 & 10.1 Are all of these Lathes in Bldg #67? Yes, as referenced in section 2.1 & 10.1 in the Solicitation
Solicitation No. N32253-24-Q-0043., Dismantle and Removal of Vertical Turret Lathes
Questions and Answers
8 General question Is there any pre-penalty for finishing a lot earlier? No
9 General question is there any reason why the period of performance is so long? Is this because of budgetary issues? Correct me if I'm wrong but it almost seems like it's designed to allow you to come go as you please, instead of a tight schedule?
The period of performance is just tentative allowing potential contractors to get an idea of the time frame in which the work should be completed.
10 General question Do you have to register as a plan holder in SAM? Being registered in SAM.gov with no active exclusions is required to be considered for the requirement.
11 General question
Will you follow the schedule of requirements in the PWS/SOW or will this be waited more towards low cost?
The award will be decided based the criteria listed in ADDENDUM TO FAR 52.212-2 in the Solicitation that being Technical Capability and Price.
File details come from the government source that posted it. Updated .