N3225318R0071_Annual_PM_for_Monarch_VMC'S.pdf

SEE ADDENDUM

(No Collect Calls)

N3225318R0071 20-Aug-2018

b. TELEPHONE NUMBER

808-473-8000 X5303

8. OFFER DUE DATE/LOCAL TIME

07:00 AM 04 Sep 2018

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA X ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

N322539. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

TAMRA C KOBASHIGAWA

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

1 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.X

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED OR X

SMALL BUSINESSX

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

PHNSY & IMF

667 SAFEGUARD ST., STE. 100

JBPHH HI 96860-5033

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE N32253 16. ADMINISTERED BY

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

PHNSY & IMF

TAMRA C KOBASHIGAWA

667 SAFEGUARD ST., STE. 100

JBPHH HI 96860-5033

TEL: 808-473-8000 X5303 FAX:

FAX:

TEL: 808-473-8000 SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

$7,500,000

NAICS:

811310

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT 41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

N3225318R0071

Section SF 1449 - CONTINUATION SHEET

WAGE RATE DETERMINATION

WD 15-5689 (Rev.-7) was first posted on www.wdol.gov on 08/07/2018

REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-5689

Daniel W. Simms Division of | Revision No.: 7 Director Wage Determinations| Date Of Revision: 07/30/2018 Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.35 for calendar year 2018 applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.35 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2018. The EO minimum wage rate will be adjusted annually.

Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts States: American Samoa, Hawaii

Area: American Samoa Statewide Hawaii County of Honolulu

OCCUPATION NOTE:

STEVEDORING AND LONGSHOREMEN: Wage rates and fringe benefits can be found on Wage Determination 2000-0085

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 15.04 01012 - Accounting Clerk II 16.88 01013 - Accounting Clerk III 18.89 01020 - Administrative Assistant 26.60 01035 - Court Reporter 22.50 01041 - Customer Service Representative I 14.12 01042 - Customer Service Representative II 15.89 01043 - Customer Service Representative III 17.33

01051 - Data Entry Operator I 14.48 01052 - Data Entry Operator II 15.80 01060 - Dispatcher, Motor Vehicle 20.45 01070 - Document Preparation Clerk 16.69 01090 - Duplicating Machine Operator 16.69 01111 - General Clerk I 13.05 01112 - General Clerk II 14.24

01113 - General Clerk III 15.98 01120 - Housing Referral Assistant 23.77 01141 - Messenger Courier 14.35 01191 - Order Clerk I 15.34 01192 - Order Clerk II 16.73 01261 - Personnel Assistant (Employment) I 16.25 01262 - Personnel Assistant (Employment) II 18.19 01263 - Personnel Assistant (Employment) III 20.27 01270 - Production Control Clerk 24.18 01290 - Rental Clerk 15.79 01300 - Scheduler, Maintenance 19.05 01311 - Secretary I 19.05 01312 - Secretary II 21.31 01313 - Secretary III 23.77 01320 - Service Order Dispatcher 18.27 01410 - Supply Technician 26.60 01420 - Survey Worker 20.72 01460 - Switchboard Operator/Receptionist 15.40 01531 - Travel Clerk I 15.82 01532 - Travel Clerk II 17.10 01533 - Travel Clerk III 18.33 01611 - Word Processor I 14.36 01612 - Word Processor II 16.11 01613 - Word Processor III 18.03 05000 - Automotive Service Occupations 05005 - Automobile Body Repairer, Fiberglass 24.99 05010 - Automotive Electrician 22.43 05040 - Automotive Glass Installer 22.00 05070 - Automotive Worker 22.00 05110 - Mobile Equipment Servicer 18.99 05130 - Motor Equipment Metal Mechanic 24.41 05160 - Motor Equipment Metal Worker 22.00 05190 - Motor Vehicle Mechanic 25.65 05220 - Motor Vehicle Mechanic Helper 17.39 05250 - Motor Vehicle Upholstery Worker 20.80 05280 - Motor Vehicle Wrecker 22.00 05310 - Painter, Automotive 23.19 05340 - Radiator Repair Specialist 22.00 05370 - Tire Repairer 16.68 05400 - Transmission Repair Specialist 24.37 07000 - Food Preparation And Service Occupations 07010 - Baker 15.31 07041 - Cook I 16.28 07042 - Cook II 18.90 07070 - Dishwasher 12.05 07130 - Food Service Worker 11.14 07210 - Meat Cutter 21.00 07260 - Waiter/Waitress 14.53 09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 21.07 09040 - Furniture Handler 14.17 09080 - Furniture Refinisher 23.18 09090 - Furniture Refinisher Helper 17.17 09110 - Furniture Repairer, Minor 20.12 09130 - Upholsterer 21.07

11000 - General Services And Support Occupations 11030 - Cleaner, Vehicles 11.98 11060 - Elevator Operator 14.00 11090 - Gardener 18.47 11122 - Housekeeping Aide 14.00 11150 - Janitor 14.00 11210 - Laborer, Grounds Maintenance 13.94 11240 - Maid or Houseman 19.28 11260 - Pruner 12.49 11270 - Tractor Operator 16.90 11330 - Trail Maintenance Worker 13.94 11360 - Window Cleaner 15.25 12000 - Health Occupations 12010 - Ambulance Driver 23.65 12011 - Breath Alcohol Technician 21.52 12012 - Certified Occupational Therapist Assistant 26.18 12015 - Certified Physical Therapist Assistant 22.28 12020 - Dental Assistant 17.87 12025 - Dental Hygienist 36.44 12030 - EKG Technician 28.62 12035 - Electroneurodiagnostic Technologist 28.62 12040 - Emergency Medical Technician 23.65 12071 - Licensed Practical Nurse I 19.24 12072 - Licensed Practical Nurse II 21.52 12073 - Licensed Practical Nurse III 23.99 12100 - Medical Assistant 17.63 12130 - Medical Laboratory Technician 24.87 12160 - Medical Record Clerk 19.97 12190 - Medical Record Technician 22.34 12195 - Medical Transcriptionist 19.74 12210 - Nuclear Medicine Technologist 42.22 12221 - Nursing Assistant I 11.41 12222 - Nursing Assistant II 12.83 12223 - Nursing Assistant III 14.00 12224 - Nursing Assistant IV 15.71 12235 - Optical Dispenser 20.03 12236 - Optical Technician 18.04 12250 - Pharmacy Technician 19.30 12280 - Phlebotomist 17.88 12305 - Radiologic Technologist 36.12 12311 - Registered Nurse I 29.29 12312 - Registered Nurse II 35.82 12313 - Registered Nurse II, Specialist 35.82 12314 - Registered Nurse III 43.34 12315 - Registered Nurse III, Anesthetist 43.34 12316 - Registered Nurse IV 51.94 12317 - Scheduler (Drug and Alcohol Testing) 26.66 12320 - Substance Abuse Treatment Counselor 20.67 13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 21.57 13012 - Exhibits Specialist II 25.62 13013 - Exhibits Specialist III 31.34 13041 - Illustrator I 22.97 13042 - Illustrator II 28.45 13043 - Illustrator III 34.80

13047 - Librarian 33.03 13050 - Library Aide/Clerk 15.46 13054 - Library Information Technology Systems 26.49 Administrator 13058 - Library Technician 20.92 13061 - Media Specialist I 21.12 13062 - Media Specialist II 23.61 13063 - Media Specialist III 26.33 13071 - Photographer I 16.81 13072 - Photographer II 18.80 13073 - Photographer III 21.57 13074 - Photographer IV 28.48 13075 - Photographer V 34.46 13090 - Technical Order Library Clerk 19.42 13110 - Video Teleconference Technician 23.31 14000 - Information Technology Occupations 14041 - Computer Operator I 17.54 14042 - Computer Operator II 19.62 14043 - Computer Operator III 22.80 14044 - Computer Operator IV 24.81 14045 - Computer Operator V 27.45 14071 - Computer Programmer I (see 1) 14072 - Computer Programmer II (see 1) 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 17.54 14160 - Personal Computer Support Technician 24.81 14170 - System Support Specialist 29.36 15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 30.83 15020 - Aircrew Training Devices Instructor (Rated) 37.30 15030 - Air Crew Training Devices Instructor (Pilot) 43.09 15050 - Computer Based Training Specialist / Instructor 30.83 15060 - Educational Technologist 31.22 15070 - Flight Instructor (Pilot) 43.09 15080 - Graphic Artist 22.97 15085 - Maintenance Test Pilot, Fixed, Jet/Prop 36.24 15086 - Maintenance Test Pilot, Rotary Wing 36.24 15088 - Non-Maintenance Test/Co-Pilot 36.24 15090 - Technical Instructor 26.09 15095 - Technical Instructor/Course Developer 31.91 15110 - Test Proctor 21.18 15120 - Tutor 21.18 16000 - Laundry, Dry-Cleaning, Pressing And Related Occupations 16010 - Assembler 12.67 16030 - Counter Attendant 12.67 16040 - Dry Cleaner 15.69 16070 - Finisher, Flatwork, Machine 12.67 16090 - Presser, Hand 12.67 16110 - Presser, Machine, Drycleaning 12.67 16130 - Presser, Machine, Shirts 12.67 16160 - Presser, Machine, Wearing Apparel, Laundry 12.67

16190 - Sewing Machine Operator 16.70 16220 - Tailor 17.59 16250 - Washer, Machine 13.69 19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 31.01 19040 - Tool And Die Maker 38.98 21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 22.43 21030 - Material Coordinator 24.18 21040 - Material Expediter 24.18 21050 - Material Handling Laborer 16.89 21071 - Order Filler 13.51 21080 - Production Line Worker (Food Processing) 22.43 21110 - Shipping Packer 17.22 21130 - Shipping/Receiving Clerk 17.22 21140 - Store Worker I 14.21 21150 - Stock Clerk 19.94 21210 - Tools And Parts Attendant 22.43 21410 - Warehouse Specialist 22.43 23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 33.23 23019 - Aircraft Logs and Records Technician 25.54 23021 - Aircraft Mechanic I 31.25 23022 - Aircraft Mechanic II 33.23 23023 - Aircraft Mechanic III 35.19 23040 - Aircraft Mechanic Helper 21.73 23050 - Aircraft, Painter 29.34 23060 - Aircraft Servicer 25.54 23070 - Aircraft Survival Flight Equipment Technician 29.34 23080 - Aircraft Worker 27.45 23091 - Aircrew Life Support Equipment (ALSE) Mechanic 27.45 I 23092 - Aircrew Life Support Equipment (ALSE) Mechanic 31.25

II

23110 - Appliance Mechanic 24.13 23120 - Bicycle Repairer 20.19 23125 - Cable Splicer 35.09 23130 - Carpenter, Maintenance 37.08 23140 - Carpet Layer 30.53 23160 - Electrician, Maintenance 37.61 23181 - Electronics Technician Maintenance I 30.03 23182 - Electronics Technician Maintenance II 32.11 23183 - Electronics Technician Maintenance III 34.19 23260 - Fabric Worker 26.99 23290 - Fire Alarm System Mechanic 23.46 23310 - Fire Extinguisher Repairer 24.99 23311 - Fuel Distribution System Mechanic 31.90 23312 - Fuel Distribution System Operator 24.14 23370 - General Maintenance Worker 20.62 23380 - Ground Support Equipment Mechanic 31.25 23381 - Ground Support Equipment Servicer 25.54 23382 - Ground Support Equipment Worker 27.45 23391 - Gunsmith I 24.99 23392 - Gunsmith II 29.00 23393 - Gunsmith III 33.02

23410 - Heating, Ventilation And Air-Conditioning 29.87 Mechanic 23411 - Heating, Ventilation And Air Contidioning 31.76 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 34.61 23440 - Heavy Equipment Operator 40.18 23460 - Instrument Mechanic 34.62 23465 - Laboratory/Shelter Mechanic 31.01 23470 - Laborer 16.49 23510 - Locksmith 28.38 23530 - Machinery Maintenance Mechanic 31.52 23550 - Machinist, Maintenance 30.92 23580 - Maintenance Trades Helper 18.13 23591 - Metrology Technician I 34.62 23592 - Metrology Technician II 36.81 23593 - Metrology Technician III 38.99 23640 - Millwright 33.02 23710 - Office Appliance Repairer 22.58 23760 - Painter, Maintenance 25.35 23790 - Pipefitter, Maintenance 33.99 23810 - Plumber, Maintenance 31.92 23820 - Pneudraulic Systems Mechanic 33.02 23850 - Rigger 34.12 23870 - Scale Mechanic 29.00 23890 - Sheet-Metal Worker, Maintenance 36.89 23910 - Small Engine Mechanic 23.00 23931 - Telecommunications Mechanic I 30.27 23932 - Telecommunications Mechanic II 31.91 23950 - Telephone Lineman 32.19 23960 - Welder, Combination, Maintenance 29.53 23965 - Well Driller 33.02 23970 - Woodcraft Worker 33.02 23980 - Woodworker 23.52 24000 - Personal Needs Occupations 24550 - Case Manager 16.37 24570 - Child Care Attendant 11.62 24580 - Child Care Center Clerk 15.14 24610 - Chore Aide 12.52 24620 - Family Readiness And Support Services 16.37 Coordinator 24630 - Homemaker 20.11 25000 - Plant And System Operations Occupations 25010 - Boiler Tender 33.02 25040 - Sewage Plant Operator 26.16 25070 - Stationary Engineer 33.02 25190 - Ventilation Equipment Tender 22.86 25210 - Water Treatment Plant Operator 26.16 27000 - Protective Service Occupations 27004 - Alarm Monitor 22.62 27007 - Baggage Inspector 14.89 27008 - Corrections Officer 26.22 27010 - Court Security Officer 28.17 27030 - Detection Dog Handler 16.67 27040 - Detention Officer 26.22 27070 - Firefighter 26.06

27101 - Guard I 14.89 27102 - Guard II 16.67 27131 - Police Officer I 29.01 27132 - Police Officer II 32.23 28000 - Recreation Occupations 28041 - Carnival Equipment Operator 14.23 28042 - Carnival Equipment Repairer 15.50 28043 - Carnival Worker 10.56 28210 - Gate Attendant/Gate Tender 16.94 28310 - Lifeguard 17.58 28350 - Park Attendant (Aide) 18.95 28510 - Recreation Aide/Health Facility Attendant 14.35 28515 - Recreation Specialist 23.58 28630 - Sports Official 15.09 28690 - Swimming Pool Operator 18.13 29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 29020 - Hatch Tender 29030 - Line Handler 29041 - Stevedore I 29042 - Stevedore II 30000 - Technical Occupations 30010 - Air Traffic Control Specialist, Center (HFO) (see 2) 39.15 30011 - Air Traffic Control Specialist, Station (HFO) (see 2) 27.01 30012 - Air Traffic Control Specialist, Terminal (HFO) (see 2) 29.74 30021 - Archeological Technician I 16.98 30022 - Archeological Technician II 19.43 30023 - Archeological Technician III 24.08 30030 - Cartographic Technician 24.08 30040 - Civil Engineering Technician 24.60 30051 - Cryogenic Technician I 25.90 30052 - Cryogenic Technician II 28.61 30061 - Drafter/CAD Operator I 16.88 30062 - Drafter/CAD Operator II 19.43 30063 - Drafter/CAD Operator III 21.67 30064 - Drafter/CAD Operator IV 26.66 30081 - Engineering Technician I 15.91 30082 - Engineering Technician II 18.64 30083 - Engineering Technician III 22.50 30084 - Engineering Technician IV 29.74 30085 - Engineering Technician V 32.60 30086 - Engineering Technician VI 39.41 30090 - Environmental Technician 23.91 30095 - Evidence Control Specialist 23.39 30210 - Laboratory Technician 23.01 30221 - Latent Fingerprint Technician I 25.90 30222 - Latent Fingerprint Technician II 28.61 30240 - Mathematical Technician 25.78 30361 - Paralegal/Legal Assistant I 18.68 30362 - Paralegal/Legal Assistant II 23.14 30363 - Paralegal/Legal Assistant III 28.30 30364 - Paralegal/Legal Assistant IV 34.24 30375 - Petroleum Supply Specialist 28.61 30390 - Photo-Optics Technician 25.78 30395 - Radiation Control Technician 28.61

30461 - Technical Writer I 22.86 30462 - Technical Writer II 27.96 30463 - Technical Writer III 33.84 30491 - Unexploded Ordnance (UXO) Technician I 24.89 30492 - Unexploded Ordnance (UXO) Technician II 30.11 30493 - Unexploded Ordnance (UXO) Technician III 36.09 30494 - Unexploded (UXO) Safety Escort 24.89 30495 - Unexploded (UXO) Sweep Personnel 24.89 30501 - Weather Forecaster I 26.66 30502 - Weather Forecaster II 32.42 30620 - Weather Observer, Combined Upper Air Or (see 2) 21.67 Surface Programs 30621 - Weather Observer, Senior (see 2) 24.08 31000 - Transportation/Mobile Equipment Operation Occupations 31010 - Airplane Pilot 30.11 31020 - Bus Aide 15.99 31030 - Bus Driver 22.88 31043 - Driver Courier 15.33 31260 - Parking and Lot Attendant 10.82 31290 - Shuttle Bus Driver 16.75 31310 - Taxi Driver 12.63 31361 - Truckdriver, Light 16.75 31362 - Truckdriver, Medium 18.10 31363 - Truckdriver, Heavy 22.77 31364 - Truckdriver, Tractor-Trailer 22.77 99000 - Miscellaneous Occupations 99020 - Cabin Safety Specialist 14.68 99030 - Cashier 10.93 99050 - Desk Clerk 21.68 99095 - Embalmer 24.89 99130 - Flight Follower 24.89 99251 - Laboratory Animal Caretaker I 13.51 99252 - Laboratory Animal Caretaker II 17.67 99260 - Marketing Analyst 27.10 99310 - Mortician 24.89 99410 - Pest Controller 19.04 99510 - Photofinishing Worker 13.86 99710 - Recycling Laborer 22.13 99711 - Recycling Specialist 26.82 99730 - Refuse Collector 19.81 99810 - Sales Clerk 14.39 99820 - School Crossing Guard 16.14 99830 - Survey Party Chief 29.89 99831 - Surveying Aide 16.34 99832 - Surveying Technician 22.39 99840 - Vending Machine Attendant 12.68 99841 - Vending Machine Repairer 16.02 99842 - Vending Machine Repairer Helper 12.68

Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal Contractors, applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is the victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: (Hawaii): $1.91 per hour, or $76.40 per week, or $331.07 per month for all employees on whose behalf the contractor provides health care benefits pursuant to the Hawaii prepaid Health Care Act. For those employees who are not receiving health care benefits mandated by the Hawaii prepaid Health Care Act, the new health and welfare benefit rate will be $4.48 per hour.

HEALTH & WELFARE (Hawaii) EO 13706: $1.63 per hour, or $65.20 per week, or $282.53 per month for all employees on whose behalf the contractor provides health care benefits pursuant to the Hawaii prepaid Health Care Act. For those employees who are not receiving health care benefits mandated by the Hawaii prepaid Health Care Act, the new health and welfare benefit rate will be $4.18 per hour. *

*This rate is to be used only when compensating employees for performance on an SCA-covered contract also covered by EO 13706, Establishing Paid Sick Leave for Federal Contractors. A contractor may not receive credit toward its SCA obligations for any paid sick leave provided pursuant to EO 13706.

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor, 3 weeks after 10 years, and 4 weeks after 15 years. Length of service includes the whole span of continuous service with the present contractor or successor, wherever employed, and with the predecessor contractors in the performance of similar work at the same Federal facility. (See 29 CFR 4.173)

HOLIDAYS: A minimum of ten paid holidays per year: New Year's Day, Martin Luther King Jr.'s Birthday, Washington's Birthday, Memorial Day, Independence Day, Labor Day, Columbus Day, Veterans' Day, Thanksgiving Day, and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE

FOLLOWING:

1) COMPUTER EMPLOYEES: Under the SCA at section 8(b), this wage determination does not apply to any employee who individually qualifies as a bona fide executive, administrative, or professional employee as defined in 29 C.F.R. Part 541. Because most Computer System Analysts and Computer Programmers who are compensated at a rate not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals, (29 C.F.R. 541.

400) wage rates may not be listed on this wage determination for all occupations within those job families. In addition, because this wage determination may not list a wage rate for some or all occupations within those job families if the survey data indicates that the prevailing wage rate for the occupation equals or exceeds $27.63 per hour conformances may be necessary for certain nonexempt employees. For example, if an individual employee is nonexempt but nevertheless performs duties within the scope of one of the Computer Systems Analyst or Computer Programmer occupations for which this wage determination does not specify an SCA wage rate, then the wage rate for that employee must be conformed in accordance with the conformance procedures described in the conformance note included on this wage determination.

Additionally, because job titles vary widely and change quickly in the computer industry, job titles are not determinative of the application of the computer professional exemption. Therefore, the exemption applies only to computer employees who satisfy the compensation requirements and whose primary duty consists of:

(1) The application of systems analysis techniques and procedures, including consulting with users, to determine hardware, software or system functional specifications;

(2) The design, development, documentation, analysis, creation, testing or modification of computer systems or programs, including prototypes, based on and related to user or system design specifications;

(3) The design, documentation, testing, creation or modification of computer programs related to machine operating systems; or

(4) A combination of the aforementioned duties, the performance of which requires the same level of skills. (29 C.F.R. 541.400).

2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If you work at night as part of a regular tour of duty, you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am.

If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek, you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime (i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work).

** HAZARDOUS PAY DIFFERENTIAL **

An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordnance, explosives, and incendiary materials. This includes work such as screening, blending, dying, mixing, and pressing of sensitive ordnance, explosives, and pyrotechnic compositions such as lead azide, black powder and photoflash powder.

All dry-house activities involving propellants or explosives. Demilitarization, modification, renovation, demolition, and maintenance operations on sensitive ordnance, explosives and incendiary materials. All operations involving re-grading and cleaning of artillery ranges.

A 4 percent differential is applicable to employees employed in a position that represents a low degree of hazard when working with, or in close proximity to ordnance, (or employees possibly adjacent to) explosives and incendiary materials which involves potential injury such as laceration of hands, face, or arms of the employee engaged in the operation, irritation of the skin, minor burns and the like;

minimal damage to immediate or adjacent work area or equipment being used. All operations involving, unloading, storage, and hauling of ordnance, explosive, and incendiary ordnance material other than small arms ammunition. These differentials are only applicable to work that has been specifically designated by the agency for ordnance, explosives, and incendiary material differential pay.

** UNIFORM ALLOWANCE **

If employees are required to wear uniforms in the performance of this contract (either by the terms of the Government contract, by the employer, by the state or local law, etc.), the cost of furnishing such uniforms and maintaining (by laundering or dry cleaning) such uniforms is an expense that may not be borne by an employee where such cost reduces the hourly rate below that required by the wage determination. The Department of Labor will accept payment in accordance with the following standards as compliance:

The contractor or subcontractor is required to furnish all employees with an adequate number of uniforms without cost or to reimburse employees for the actual cost of the uniforms. In addition, where uniform cleaning and maintenance is made the responsibility of the employee, all contractors and subcontractors subject to this wage determination shall (in the absence of a bona fide collective bargaining agreement providing for a different amount, or the furnishing of contrary affirmative proof as to the actual cost), reimburse all employees for such cleaning and maintenance at a rate of $3.35 per week (or $.67 cents per day). However, in those instances where the uniforms furnished are made of "wash and wear" materials, may be routinely washed and dried with other personal garments, and do not require any special treatment such as dry cleaning, daily washing, or commercial laundering in order to meet the cleanliness or appearance standards set by the terms of the Government contract, by the contractor, by law, or by the nature of the work, there is no requirement that employees be reimbursed for uniform maintenance costs.

** SERVICE CONTRACT ACT DIRECTORY OF OCCUPATIONS **

The duties of employees under job titles listed are those described in the "Service Contract Act Directory of Occupations", Fifth Edition (Revision 1), dated September 2015, unless otherwise indicated.

** REQUEST FOR AUTHORIZATION OF ADDITIONAL CLASSIFICATION AND WAGE RATE, Standard Form 1444 (SF-1444) **

Conformance Process:

The contracting officer shall require that any class of service employee which is not listed herein and which is to be employed under the contract (i.e., the work to be performed is not performed by any classification listed in the wage determination), be classified by the contractor so as to provide a reasonable relationship (i.e., appropriate level of skill comparison) between such unlisted classifications and the classifications listed in the wage determination (See 29 CFR 4.6(b)(2)(i)). Such conforming procedures shall be initiated by the contractor prior to the performance of contract work by such unlisted class(es) of employees (See 29 CFR 4.6(b)(2)(ii)). The Wage and Hour Division shall make a final determination of conformed classification, wage rate, and/or fringe benefits which shall be paid to all employees performing in the classification from the first day of work on which contract work is performed by them in the classification. Failure to pay such unlisted employees the compensation agreed upon by the interested parties and/or fully determined by the Wage and Hour Division retroactive to the date such class of employees commenced contract work shall be a violation of the Act and this contract. (See 29 CFR 4.6(b)(2)(v)). When multiple wage determinations are included in a contract, a separate SF-1444 should be prepared for each wage determination to which a class(es) is to be conformed.

The process for preparing a conformance request is as follows:

1) When preparing the bid, the contractor identifies the need for a conformed occupation(s) and computes a proposed rate(s).

2) After contract award, the contractor prepares a written report listing in order the proposed classification title(s), a Federal grade equivalency (FGE) for each proposed classification(s), job description(s), and rationale for proposed wage rate(s), including information regarding the agreement or disagreement of the authorized representative of the employees involved, or where there is no authorized representative, the employees themselves. This report should be submitted to the contracting officer no later than 30 days after such unlisted class(es) of employees performs any contract work.

3) The contracting officer reviews the proposed action and promptly submits a report of the action, together with the agency's recommendations and pertinent information including the position of the contractor and the employees, to the U.S.

Department of Labor, Wage and Hour Division, for review (See 29 CFR 4.6(b)(2)(ii)).

4) Within 30 days of receipt, the Wage and Hour Division approves, modifies, or disapproves the action via transmittal to the agency contracting officer, or notifies the contracting officer that additional time will be required to process the request.

5) The contracting officer transmits the Wage and Hour Division's decision to the contractor.

6) Each affected employee shall be furnished by the contractor with a written copy of such determination or it shall be posted as a part of the wage determination (See 29 CFR 4.6(b)(2)(iii)).

Information required by the Regulations must be submitted on SF-1444 or bond paper.

When preparing a conformance request, the "Service Contract Act Directory of Occupations" should be used to compare job definitions to ensure that duties requested are not performed by a classification already listed in the wage determination. Remember, it is not the job title, but the required tasks that determine whether a class is included in an established wage determination.

Conformances may not be used to artificially split, combine, or subdivide classifications listed in the wage determination (See 29 CFR 4.152(c)(1)).

PWS

PERFORMANCE WORK STATEMENT (PWS)

PEARL HARBOR NAVAL SHIPYARD AND

INTERMEDIATE MAINTENANCE FACILITY

VERTICAL MACHINING CENTERS (VMC)

PREVENTIVE MAINTENANCE, REMEDIAL SERVICES AND MATERIALS

1.0 BACKGROUND

1.1 Pearl Harbor Naval Shipyard & Intermediate Maintenance Facility (PHNSY & IMF) is a US Navy regional industrial center that maintains, overhauls, and repairs various vessels of the US Navy. Its industrial operations provide the US naval forces with a wide range of services and resources located on the island of Oahu, Hawaii, with direct and indirect support to SSN 688 and 774 class submarines, surface vessels and shore based activities in the Pacific

2.0 OBJECTIVE AND SCOPE

2.1 PHNSY & IMF seeks a Contractor to provide annual preventive maintenance services, material for preventive maintenance services and remedial maintenance for three (3) Monarch Vertical Machining Centers. Labor, travel and materials for preventive maintenance shall be included. Travel, air fare, lodging, rental car, and per diem shall be in accordance with current Department of Defense Joint Travel Regulations and Federal Acquisition Regulations (FAR) 31.205-46. Travel receipts shall be provided upon request.

Alpha # Manufacturer Model Serial no Location eFEM asset #

MLP Monarch VMC – 175B 2004602B B-67 3225348099

FLW Monarch VMC – 75B 2003001B B-67 3225348013

MJW Monarch VMC – 150B 92513B B-67* 32253P7725

* Controlled Nuclear Industrial Area (CNIA)

3.0 PERFORMANCE REQUIREMENTS

3.1 Preventive Maintenance. The contractor shall provide all management, parts, labor, materials, supplies, transportation and tools required for preventive maintenance of all equipment in paragraph 2.1 in accordance with the applicable manufacturer’s manual to ensure proper operation of equipment. Contractor shall provide a contact phone number and alternate phone number for use during the contract duration. The contractor shall notify the Technical Point of Contact (TPOC) if any machine covered under this contract cannot be restored to operational status within the contract period.

The Contractor shall create complete system backups, prior to and after any configuration changes to hardware or software to ensure no loss of data. All software upgrades, if required, shall be provided. The Contractor shall ensure that upgrades include all applicable software licensing agreements.

3.1.1 Preventive Maintenance Parts. Parts that are replaced as part of the preventive maintenance service are included at no additional cost to the Government. Materials supplied shall be new and not refurbished or reconditioned materials. Parts shall include the following:

Part Description Part # Qty. Model Table Assy. 402,516-3 VMC-75B X Axis Way Wipers E64463 4 VMC-75B X Axis Guide Wipers E49013 2 VMC-75B

Part Description Part # Qty. Model X-Axis Keeper Wipers E71227-12 4 VMC-75B Cross-Slide Assy. 402,717 VMC-75B Way Wiper E64463 4 VMC-75B Guide Way Wiper E59480 1 VMC-75B RF Felt Wiper E58229 1 VMC-75B LF Felt Wiper E58228 1 VMC-75B RR Felt Wiper E55004 1 VMC-75B LR Felt Wiper E55002 1 VMC-75B Gib Wiper E71227-14 1 VMC-75B Gib Wiper E71227-9 1 VMC-75B Keeper Wiper E71227-12 8 VMC-75B Arm Assy. 402,714-2 VMC-75B Way Wiper, TR/BL E55193 2 VMC-75B Way Wiper, TL/BR E55192 2 VMC-75B Consumables VMC-75B Oil Circulation Filter E55850 1 VMC-75B Way Lube Filter E55724-R1 1 VMC-75B Flood/Spindle Coolant Filter E59950-R1 1 VMC-75B Air Conditioner Filter E57722-R2 1 VMC-75B Oil Chiller Air Filter E82201-R1 1 VMC-75B Y-Axis Drive Belt E57761-4 1 VMC-75B Z-Axis Drive Belt E57761-5 1 VMC-75B Spindle Keys E74777 2 VMC-75B Spindle Gearbox Shifter Shoes E72828 2 VMC-75B Spindle Coolant Rotary Union E58405 1 VMC-75B Operator Panel PB Bulbs M60065-1 6 VMC-75B Work Light Bulb E55045-R1 2 VMC-75B CNC Battery M60060-R21 1 VMC-75B Spindle Orient Encoder 101,021 1 VMC-75B Spindle Orient Enc. Gear E57997 1 VMC-75B DIP Relays E82781 4 VMC-75B Tool Storage Pocket M50746 1 VMC-75B Tool Pocket Spring Clips E73330 4 VMC-75B Shuttle Posn. LS E53334-1 1 VMC-75B Table Assy. 401,627-2 VMC -150B X Axis Way Wipers E69109 4 VMC -150B X Axis Guide Wipers E49013 2 VMC -150B Cross-Slide Assy. 401,626-3 VMC -150B Way Wiper E69124 4 VMC -150B Guide Way Wiper E69169 1 VMC -150B

Guide Way Wiper E69170 1 VMC -150B Guide Way Wiper E65133 1 VMC -150B RF Felt Wiper E57868 1 VMC -150B LF Felt Wiper E57869 1 VMC -150B RR Felt Wiper E57868 1 VMC -150B LR Felt Wiper E52188 1 VMC -150B Gib Wiper E71227-6 1 VMC -150B Gib Wiper E71227-9 1 VMC -150B Keeper Wiper E71227-12 8 VMC -150B Arm Assy. 401,654-5 VMC -150B Way Wiper, TR/BL E56239 2 VMC -150B Way Wiper, TL/BR E56240 2 VMC -150B Consumables VMC -150B Oil Circulation Filter E55850 1 VMC -150B Way Lube Filter E55724-R1 1 VMC -150B Air Conditioner Filter E57722-R1 1 VMC -150B Oil Chiller Air Filter E57720-R1 1 VMC -150B X-Axis Drive Belt E65109-14 1 VMC -150B Y-Axis Drive Belt E65109-13 1 VMC -150B Z-Axis Drive Belt E56315-1 1 VMC -150B Spindle Drive Belt E56777-3 1 VMC -150B Spindle Keys E74777 2 VMC -150B Spindle Gearbox Shifter Shoes E72828 2 VMC -150B Spindle Coolant Rotary Union E58405 1 VMC -150B Operator Panel PB Bulbs E55265-R1 2 VMC -150B Work Light Bulb E55045-R1 2 VMC -150B CNC Battery (3) D cells 0 VMC -150B Spindle Orient Encoder 100,423-R1 0 VMC -150B Spindle Orient Enc. Gear E55375 0 VMC -150B DIP Relays E82781 4 VMC -150B Tool Storage Pocket E72690 2 VMC -150B Tool Pocket Spring Clips E73330 4 VMC -150B Tool Pocket Wear Strip E57210-2 4 VMC -150B Gripper OS E55491 3 VMC -150B Shuttle Posn. LS E53334 1 VMC -150B Table Assy. M65040-2 VMC – 175B X Axis Way Wipers E69109 4 VMC – 175B X Axis Guide Wipers E49013 2 VMC – 175B X-Axis Keeper Wipers E71227-12 8 VMC – 175B Cross-Slide Assy. M65039 VMC – 175B

Way Wiper E69124 4 VMC – 175B Guide Way Wiper E58076 1 VMC – 175B RF Felt Wiper E57868 1 VMC – 175B LF Felt Wiper E58105 1 VMC – 175B RR Felt Wiper E52186 1 VMC – 175B LR Felt Wiper E52188 1 VMC – 175B Gib Wiper E71227-14 1 VMC – 175B Gib Wiper E71227-9 1 VMC – 175B Keeper Wiper E71227-12 8 VMC – 175B Arm Assy. 402,510-5 VMC – 175B Way Wiper, TR/BL E56239 2 VMC – 175B Way Wiper, TL/BR E56240 2 VMC – 175B Consumables VMC – 175B Oil Circulation Filter E55850 1 VMC – 175B Way Lube Filter E55724-R1 1 VMC – 175B Flood/Spindle Coolant Filter E59950-R1 1 VMC – 175B Air Conditioner Filter E57722-R2 1 VMC – 175B Oil Chiller Air Filter E82201-R1 1 VMC – 175B Y-Axis Drive Belt E57761-4 1 VMC – 175B Z-Axis Drive Belt E57761-3 1 VMC – 175B Spindle Keys E74777 2 VMC – 175B Spindle Gearbox Shifter Shoes E72828 2 VMC – 175B Spindle Coolant Rotary Union M60022 1 VMC – 175B Operator Panel PB Bulbs M60065-1 6 VMC – 175B Work Light Bulb E55045-R1 2 VMC – 175B CNC Battery M60060-R21 1 VMC – 175B Spindle Orient Encoder M64524 1 VMC – 175B Spindle Orient Enc. Gear E57997 1 VMC – 175B DIP Relays E82781 4 VMC – 175B Tool Storage Pocket M64561-R162 1 VMC – 175B

3.1.2 Preventive Maintenance Service. Preventive Maintenance Service shall be in accordance with applicable Manufacturer’s Requirements and shall include the following:

-Clean spindle nose and tool storage area.

-Clean coolant nozzles / troughs / tanks.

-Check table, cross slides, Z axis for proper lubrication on ways.

-Check all wipers and advise customer.

-Wipe and Oil tool shuttle guide rods.

-Check / change gearbox oil - Note level and color.

-Clean chips and debris from way areas on all axis.

-Check / Fill main lubricator / Note level.

-*If machine is equipped with an Aerocology Unit, check, clean filter and note condition.

-Replace oil chiller filter / note color.

-Clean dust and dirt from fins of condenser of Turmoil Chiller.

-Grease arm counter balance chain and check sprocket for wear damage.

-Check all oil other dashpot levels - Fill if necessary.

-Clean all exposed limit switches and actuators.

-Check all hydraulic unit pressure settings / Note pressures.

-Visually inspect hydraulic power supply unit for leaks.

-Check operation of all over travel switches x,y,z,(w).

-Check for proper operation of lights and switches in pendent.

-Inspect X,Y,Z axis timing belts and pulleys / Note wear.

-Remove way covers and clean any chips and dirt.

-Inspect way covers, wipers and note condition.

-Check telescopic spring on Z axis ballscrew for chips and wear.

-Lubricate upper and lower tool storage chain guides.

-Check tool storage chain tension.

-Check chip door interlocks for proper operation.

-Check the oil level of the hydraulic pump reservoir.

-Check the chain tension of dual pallet loader.

-Check the oil level of the gearbox on a dual pallet loader.

-Clean spindle motor air vent / fins of dirt and dust.

-Replace / Check rotary coupling.

-Replace in line filter element.

-Wipe clean fan blades in electrical cabinet. (Drives, Controls, Etc.)

-Check X axis gib adjustment / Note inch pound reading.

-Check Y axis gib adjustment / Note inch pound reading.

-Check Z axis gib adjustment / Note inch pound reading.

-Check X,Y,Z ballscrews for wear. / Note how screw sounds.

-Check machine level.

-Check machine squareness.

-Check / Replace filter elements in air prep. unit.

-Verify supply voltage matches machine nameplate, +/-10% -Check Pneumatic supply = 85psi min at 10SCFM (check during a toolchange cycle.)

-Check that all axis way covers are properly installed.

-Check for smooth tool exchange at spindle and shuttle(<0.03). (Change several tools) -Check with heavy tools, that tool is seated in shuttle after pickup at all pockets -Check if gripper is under spindle, machine goes into E-stop -Check overall toolchange alignments.

-Check tool door interlock switch for proper operation.

-Check low air pressure fault switch (fault below 60psi).

-Check spindle purge air setting. (10-12psi).

-Check way lube oil reservoir for level.

-Check oil circulation pump for 125 - 180 psi.

-Check collet locknut.

-Check the spindle purge pressure is existent at spindle nose.

-Run spindle warmup / Break-in. / Record max temperature.

-Check around spindle for oil leaks.

-Check spindle tram for less than .0001" p/inch of spindle sweep.

-Check X,Y,Z over travels are set at .150 beyond normal travels.

-Check wiper operation, no streaks.

-Check cabinet fans & cooler.

-Initiate a lube cycle and check for proper output at final distribution points.

-Check Tli for proper operation and for coolant wear.

-Check Probe for proper operation and run repeat. Note values.

-Check rotary for proper operation, clamps, and backlash.

-Check Spindle air blast, Spindle flood.

-Check the oil in the gripper motor gearbox.

-Check spindle spot lubricator for signs of gelling or contamination.

-Check spindle lube lines for pinches, cracks or leaking.

-Check the sump suction filter, 40 and 5 micron inline filters.

-Check for 75 psi at pump (Regulated).

-Check for 250-300 psi at spindle lube block at spindle start.

-Check for proper spindle mist at ALL THREE lines going to spindle.

3.1.3 Software Upgrades. All software upgrades, if required, shall be provided. The Contractor shall ensure that upgrades include all applicable software licensing agreements. The Contractor shall create complete system backups, prior to and after any configuration changes to hardware or software to ensure no loss of data.

3.1.4 Preventive Maintenance Reports. The Contractor shall submit a written maintenance report to the Technical Point of Contact (TPOC) within 1 week after the completion of each Preventive Maintenance and Inspection. The report shall contain, at a minimum, the identification and location of equipment, the type of maintenance performed, materials or parts replaced, date of preventive maintenance, service technician’s name and an assessment of the overall condition of the equipment serviced.

3.2 Remedial Repairs. Remedial repair identified during preventive maintenance shall be accomplished if completion of the repair is possible within the period of performance.

3.2.1 Remedial Repair Parts. Parts that are replaced as part of remedial repair is to be issued on a separate purchase order to be approved by the TPOC. Materials supplied shall be new and not refurbished or reconditioned materials.

3.2.2 Remedial Repair Reports. The Contractor shall provide a repair report to the TPOC within 1 week after completion of the repair. The report shall include the identification and location of the equipment, description of the repairs performed, date and time of the repairs performed, material or parts replaced, and the name of the technician performing the repairs. If a repair cannot be completed during the on-site visit, the Remedial Repair Reports shall also include a description of the needed repair; and estimated time, materials and cost to accomplish the work.

3.3 Removal and disposal of replacement parts and materials. The Contractor shall be responsible for removal and disposal of replaced parts and material upon repair completion. Disposal of parts/materials shall be in accordance with Federal, State and local laws and regulations. The disposal of replaced parts/materials within PHNSY&IMF is prohibited.

3.4 Hazardous Waste and Scrap Metal shall be turned over to PHNSY&IMF.

For specific guidance, guidelines and procedures governing the use and disposal of hazardous material or hazardous waste at PHNSY & IMF, direct all questions to the TPOC.

3.5 Photography, photographic equipment, computing and recording devices are prohibited at PHNSY & IMF without prior approval. This includes personal and company cellular phones with camera features. Direct all questions to the

TPOC.

3.6 Place of Performance. Pearl Harbor Naval Shipyard, Controlled Industrial Area (CIA), Shop 67, Pearl Harbor, Hawaii.

3.7 Period of Performance. All work to be completed within twelve months after award of contract, (01 Sept. 2018 – 31 Aug. 2019). The contractor shall meet with the Technical Point of Contact (TPOC) to establish a schedule and complete all work on the 3 VMC’s within 9 working days.

3.8 Hours of Performance.

3.8.1 Normal hours. All work shall be performed during the normal working hours of 0630 to 1500 hours, daily Monday through Friday, excluding Federal Holidays. If the Federal holiday falls on a Saturday, the holiday is observed on the preceding Friday.

If the Federal holiday falls on a Sunday, the holiday is observed on the following Monday. Facilities may close due to local or national emergencies, administrative closings, or other Government directed facility closings. PHNSY & IMF typically observes an annual curtailment closure between Christmas and New Year’s, consult with TPOC for details. Contractor access to Government facilities during closures is not permitted.

3.9 Workmanship. The Contractor shall ensure that all work performed is done by a factory trained and authorized service technician and shall provide a 1-year warranty on the work performed. The warranty shall begin when all work is complete.

3.10 Enterprise-wide contractor manpower reporting application.

The contractor shall report ALL contractor labor hours (including subcontractor labor hours) required for performance of services provided under this contract for the PHNSY & IMF using the following web address https://doncmra.nmci.navy.mil.

Reporting inputs will be for the labor executed during the period of performance during each Government fiscal year (FY), which runs October 1 through September 30.

While inputs may be reported any time during the FY, all data shall be reported no later than October 31 of each calendar year. Contractors may direct questions to the help desk, linked at https://doncmra.nmci.navy.mil.”

3.11 SERVICE DELIVERY SUMMARY TABLE A

Performance Requirement

PWS

Paragraph

Notes Performance Threshold

1. Perform Preventive Maintenance Paragraphs 3.1.

3.1.1 and 3.1.2

100% delivery and compliance.

2. Provide software upgrades if required.

Paragraph 3.1.3 100% delivery and compliance.

3. Provide written Preventive Maintenance Report within one week of service.

Paragraph 3.1.4 100% delivery and compliance.

4. Perform remedial repairs within the time allowed.

Paragraphs 3.2, and 3.2.1

100% delivery and compliance.

5. Provide written Remedial Repair Report within one week of service.

Paragraph 3.2.2 100% delivery and compliance.

6. Removal and disposal of replacement parts and materials.

Paragraph 3.3 100% delivery and compliance.

7. Hazardous waste and scrap metal to be turned in to PHNSY & IMF.

Paragraph 3.4 100% delivery and compliance.

4.0 QUALITY ASSURANCE

4.1 The Contractor is responsible for implementing and maintaining a Quality Control Plan

(QCP) that identifies and results in the correction of potential and actual problems. The QCP shall be implemented on the first day of contract performance and a copy of QCP shall be provided to the Contracting Officer’s Representative (COR) prior to contract performance.

4.2 The QCP shall outline the Contractor’s plan to ensure the quality of deliverables as outlined in this PWS. The QCP shall address what will be reviewed and shall outline actions to be taken by the Contractor, should the review(s) identify areas requiring remedial action.

4.3…