14-T-1556_(TIPPECANOE_SSDG_PARTS)09242014.doc

Section SF 1449 - CONTINUATION SHEET

TIPPECANOE

FFP

UBE-900020 Water Pump KitWater Pump Kit//ENGINE,DSL, SSDG 1

FOB: Destination

PURCHASE REQUEST NUMBER: N216224177V071

NET AMT

UBE-900021 Governor Drive KitGovernor Drive Kit

UBE-900021 Governor Drive KitGovernor Drive Kit

NET AMT

UBE-900022 Power Pack KitPower Pack Kit

UBE-900022 Power Pack KitPower Pack Kit

NET AMT

UBE-405577 Shim Kit for Fuel Inj. PumpsShim Kit for Fuel Inj. Pu

UBE-405577 Shim Kit for Fuel Inj. PumpsShim Kit for Fuel Inj. Pumps

NET AMT

ORTHO-O-Ring Lube O-Ring LubeO-Ring Lube

ORTHO-O-Ring Lube O-Ring LubeO-Ring Lube

NET AMT

UBE-701094 Gasket, 1.75 mmGasket, 1.75 mm

UBE-701094 Gasket, 1.75 mmGasket, 1.75 mm

NET AMT

UBE-701095 Gasket, 2.25 mmGasket, 2.25 mm

UBE-701095 Gasket, 2.25 mmGasket, 2.25 mm

NET AMT

UBE-700929 Gasket, 2.5 mmGasket, 2.5 mm

UBE-700929 Gasket, 2.5 mmGasket, 2.5 mm

NET AMT

UBE-701096 Gasket, 2.75 mmGasket, 2.75 mm

UBE-701096 Gasket, 2.75 mmGasket, 2.75 mm

NET AMT

UBE-900023 Door Gasket Kit (O-Ring)Door Gasket Kit (O-Ring)

UBE-900023 Door Gasket Kit (O-Ring)Door Gasket Kit (O-Ring)

NET AMT

UBE-900024 Air Start Distributor KitAir Start Distributor Kit

UBE-900024 Air Start Distributor KitAir Start Distributor Kit

NET AMT

UBE-900025 Overspeed Trip KitOverspeed Trip Kit

UBE-900025 Overspeed Trip KitOverspeed Trip Kit

NET AMT

UBE-900026 Tandem Pump Drive KitTandem Pump Drive Kit

UBE-900026 Tandem Pump Drive KitTandem Pump Drive Kit

NET AMT

UBE-11553 Lock Wire 1.25 mmLock Wire 1.25 mm

UBE-11553 Lock Wire 1.25 mmLock Wire 1.25 mm

NET AMT

UBE-58390X Rebuilt Cylinder HeadsRebuilt Cylinder Heads

UBE-58390X Rebuilt Cylinder HeadsRebuilt Cylinder Heads

NET AMT

UBE-401701 Gasket Set Cylinder HeadGasket Set Cylinder Head

UBE-401701 Gasket Set Cylinder HeadGasket Set Cylinder Head

NET AMT

UBE-10171 O-RingO-Ring

UBE-10171 O-RingO-Ring

NET AMT

UBE-23466 Gasket, CopperGasket, Copper

UBE-23466 Gasket, CopperGasket, Copper

NET AMT

UBE-21116 Bearing Half ShellBearing Half Shell

UBE-21116 Bearing Half ShellBearing Half Shell

NET AMT

UBE-21117 Thrust Segment Camshaft Set of 4Thrust Segment Camshaf

UBE-21117 Thrust Segment Camshaft Set of 4Thrust Segment Camshaft Set of 4

NET AMT

UBE-87779 Link Control Shaft LeverLink Control Shaft Lever

UBE-87779 Link Control Shaft LeverLink Control Shaft Lever

NET AMT

UBE-16836 WasherWasher

UBE-16836 WasherWasher

NET AMT

UBE-20190 Hex Lock NutHex Lock Nut

UBE-20190 Hex Lock NutHex Lock Nut

NET AMT

UBE-60550 Screw Link Fuel PumpScrew Link Fuel Pump

UBE-60550 Screw Link Fuel PumpScrew Link Fuel Pump

NET AMT

UBE-13225 Ball BearingBall Bearing

UBE-13225 Ball BearingBall Bearing

NET AMT

UBE-13242 Ball BearingBall Bearing

UBE-13242 Ball BearingBall Bearing

NET AMT

UBE-13429 Ball BearingBall Bearing

UBE-13429 Ball BearingBall Bearing

NET AMT

UBE-16406 Fitted Allen ScrewFitted Allen Screw

UBE-16406 Fitted Allen ScrewFitted Allen Screw

NET AMT

UBE-16646 Hex Lock NutHex Lock Nut

UBE-16646 Hex Lock NutHex Lock Nut

NET AMT

UBE-16407 Fitted Allen ScrewFitted Allen Screw

UBE-16407 Fitted Allen ScrewFitted Allen Screw

NET AMT

UBE-16292 Allen ScrewAllen Screw

UBE-16292 Allen ScrewAllen Screw

NET AMT

UBE-10464 Ripple Pin ConRipple Pin Con

UBE-10464 Ripple Pin ConRipple Pin Con

NET AMT

UBE-20579 Hex ScrewHex Screw

UBE-20579 Hex ScrewHex Screw

NET AMT

UBE-16959 CIR ClipCIR Clip

UBE-16959 CIR ClipCIR Clip

NET AMT

UBE-703039 Roller BearingRoller Bearing

UBE-703039 Roller BearingRoller Bearing

NET AMT

UBE-16879 Locking PlateLocking Plate

UBE-16879 Locking PlateLocking Plate

NET AMT

UBE-13346 Roller BearingRoller Bearing

UBE-13346 Roller BearingRoller Bearing

NET AMT

UBE-90762 GasketGasket

UBE-90762 GasketGasket

NET AMT

UBE-49343 Drive Gear Lube OilDrive Gear Lube Oil

UBE-49343 Drive Gear Lube OilDrive Gear Lube Oil

NET AMT

UBE-49345 Driven Gear Lube OilDriven Gear Lube Oil

UBE-49345 Driven Gear Lube OilDriven Gear Lube Oil

NET AMT

UBE-404837 Piston Ring SetPiston Ring Set

UBE-404837 Piston Ring SetPiston Ring Set

NET AMT

UBE-702108 Closing LinkClosing Link

UBE-702108 Closing LinkClosing Link

NET AMT

UBE-16885 Locking PlateLocking Plate

UBE-16885 Locking PlateLocking Plate

NET AMT

UBE-16888 Locking Plate w/TapLocking Plate w/Tap

UBE-16888 Locking Plate w/TapLocking Plate w/Tap

NET AMT

UBE-20628 Lock PlateLock Plate

UBE-20628 Lock PlateLock Plate

NET AMT

UBE-10413 Cotter PinCotter Pin

UBE-10413 Cotter PinCotter Pin

NET AMT

UBE-16880 Locking Plate w/TapLocking Plate w/Tap

UBE-16880 Locking Plate w/TapLocking Plate w/Tap

NET AMT

UBE-700287 Damper Test KitDamper Test Kit

UBE-700287 Damper Test KitDamper Test Kit

NET AMT

Mfg. P/N REF 20260 BD P/N 2456... Cone Block (Fixed, Rubber Elem

Mfg. P/N REF 20260 BD P/N 2456... Cone Block (Fixed, Rubber Elements)Cone Block (Fixed, Rubber Elements)

NET AMT

700243 Intercooler Gasket KitIntercooler Gasket Kit

700243 Intercooler Gasket KitIntercooler Gasket Kit

NET AMT

047720 Oil Throw Ring (2pcs=1 Ring)Oil Throw Ring (2pcs=1 Ring)

047720 Oil Throw Ring (2pcs=1 Ring)Oil Throw Ring (2pcs=1 Ring)

NET AMT

UBE-407544X Cylinder Liner, Unit ExchangeCylinder Liner, Unit Ex

UBE-407544X Cylinder Liner, Unit ExchangeCylinder Liner, Unit Excha

NET AMT

UBE-701472X Fuel Injection Pump, Unit ExchangeFuel Injection Pum

UBE-701472X Fuel Injection Pump, Unit ExchangeFuel Injection Pump, Unit Exchange

NET AMT

UBE-415234 Link Connection for Fuel PumpLink Connection for Fuel

UBE-415234 Link Connection for Fuel PumpLink Connection for Fuel Pump

NET AMT

UBE-16671 Plug, Fuel PumpPlug, Fuel Pump

UBE-16671 Plug, Fuel PumpPlug, Fuel Pump

NET AMT

UBE-10007 Gasket, CopperGasket, Copper

UBE-10007 Gasket, CopperGasket, Copper

NET AMT

UBE-700287 Damper Test KitDamper Test Kit

UBE-700287 Damper Test KitDamper Test Kit

NET AMT

UBE-45628X Lube Oil Pump, Unit ExchangeLube Oil Pump, Unit Excha

UBE-45628X Lube Oil Pump, Unit ExchangeLube Oil Pump, Unit Exchange

NET AMT

UBE-20811 Jacket Water Pump, Unit ExchangeJacket Water Pump, Uni

UBE-20811 Jacket Water Pump, Unit ExchangeJacket Water Pump, Unit Exchange

NET AMT

UBE-21299 Main Bearing, U/PMain Bearing, U/P

UBE-21299 Main Bearing, U/PMain Bearing, U/P

NET AMT

UBE-21298 Main Bearing, L/PMain Bearing, L/P

UBE-21298 Main Bearing, L/PMain Bearing, L/P

NET AMT

UBE-21232 Thrust Segment (Half 2pc=1 Set)Thrust Segment (Half 2p

UBE-21232 Thrust Segment (Half 2pc=1 Set)Thrust Segment (Half 2pc=1 Set)

NET AMT

UBE-24561 Gasket Kit, Jacket Water CoolerGasket Kit, Jacket Wate

UBE-24561 Gasket Kit, Jacket Water CoolerGasket Kit, Jacket Water Cooler

NET AMT

UBE-24562 Gasket Kit, LO CoolerGasket Kit, LO Cooler

UBE-24562 Gasket Kit, LO CoolerGasket Kit, LO Cooler

NET AMT

13353 BearingBearing

13353 BearingBearing

NET AMT

13209 BearingBearing

13209 BearingBearing

NET AMT

11708 SealSeal

11708 SealSeal

NET AMT

MSC TERMS AND CONDITIONS

Offers/quotes submitted in response to this solicitation shall not contain nor be subject to the offeror’s/vendor’s standard commercial terms and conditions. Any offer/quote submitted in response to this solicitation which includes the offeror’s/vendor’s standard commercial terms and conditions may be considered a material defect and may be rejected as being non-responsive to the solicitation.

TEST PROGRAM FOR COMMERCIAL

Test Program for Commercial Items: This requirement will be awarded using the procedures under FAR Subpart 13.5, Test Program for Commercial Items of the Clinger Cohen Act of 1996. The following FAR Part 13 Simplified Acquistion Procedures shall be used: Quotes shall be solicited and a purchase order issued to the successful OFFEROR WHO SUBMITS THE LOWEST PRICE. Award will be made for all parts. Quotes for less than all parts listed will not be accepted. FAR Part 13 purchase order procedures shall supersede any contrary procedures set forth or incorporated by references in this solicitation.

PARTS LIST

Miltitary Sealift Command (MSC) intends to award a firm fixed purchase order for OEM parts manufactured by Rolls Royce Marines North America, 1880 S. Dairy Ashford St. Suite 545 Houston, TX 77077. The following parts are required:

WPM COMPLIANCE

TOTAL

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

DELIVERY INFORMATION

BLAKE NAM

N40443 MSC BATS WAREHOUSE

9284 BALBOA AVE

SAN DIEGO CA 92123

619-553-6053

N40443

CLAUSES INCORPORATED BY REFERENCE

CLAUSES INCORPORATED BY FULL TEXT

52.204-13 SYSTEM FOR AWARD MANAGEMENT Maintenance (JULY 2013)

(a) Definitions. As used in this clause--

Data Universal Numbering System (DUNS) number means the 9-digit number assigned by Dun and Bradstreet, Inc. (D&B) to identify unique business entities, which is used as the identification number for Federal Contractors.

Data Universal Numbering System+4 (DUNS+4) number means the DUNS number assigned by D&B plus a 4-character suffix that may be assigned by a business concern. (D&B has no affiliation with this 4-character suffix.) This 4-character suffix may be assigned at the discretion of the business concern to establish additional SAM records for identifying alternative Electronic Funds Transfer (EFT) accounts (see the FAR at subpart 32.11) for the same concern.

Registered in the System for Award Management (SAM) database means that—

(1) The Contractor has entered all mandatory information, including the DUNS number or the DUNS+4 number, the Contractor and Government Entity (CAGE) code, as well as data required by the Federal Funding Accountability and Transparency Act of 2006 (see subpart 4.14), into the SAM database;

(2) The Contractor has completed the Core, Assertions, Representations and Certifications, and Points of Contact sections of the registration in the SAM database;

(3) The Government has validated all mandatory data fields, to include validation of the Taxpayer Identification Number (TIN) with the Internal Revenue Service (IRS). The Contractor will be required to provide consent for TIN validation to the Government as a part of the SAM registration process; and

(4) The Government has marked the record ``Active''.

System for Award Management (SAM) means the primary Government repository for prospective Federal awardee and Federal awardee information and the centralized Government system for certain contracting, grants, and other assistance-related processes. It includes—

(1) Data collected from prospective Federal awardees required for the conduct of business with the Government;

(2) Prospective contractor-submitted annual representations and certifications in accordance with FAR subpart 4.12; and

(3) Identification of those parties excluded from receiving Federal contracts, certain subcontracts, and certain types of Federal financial and non-financial assistance and benefits.

(b) The Contractor is responsible for the accuracy and completeness of the data within the SAM database, and for any liability resulting from the Government's reliance on inaccurate or incomplete data. To remain registered in the SAM database after the initial registration, the Contractor is required to review and update on an annual basis, from the date of initial registration or subsequent updates, its information in the SAM database to ensure it is current, accurate and complete. Updating information in the SAM does not alter the terms and conditions of this contract and is not a substitute for a properly executed contractual document.

(c)(1)(i) If a Contractor has legally changed its business name, doing business as name, or division name (whichever is shown on the contract), or has transferred the assets used in performing the contract, but has not completed the necessary requirements regarding novation and change-of-name agreements in subpart 42.12, the Contractor shall provide the responsible Contracting Officer a minimum of one business day's written notification of its intention to—

(A) Change the name in the SAM database;

(B) Comply with the requirements of subpart 42.12 of the FAR; and

(C) Agree in writing to the timeline and procedures specified by the responsible Contracting Officer. The Contractor shall provide with the notification sufficient documentation to support the legally changed name.

(ii) If the Contractor fails to comply with the requirements of paragraph

(c)(1)(i) of this clause, or fails to perform the agreement at paragraph (c)(1)(i)(C) of this clause, and, in the absence of a properly executed novation or change-of-name agreement, the SAM information that shows the Contractor to be other than the Contractor indicated in the contract will be considered to be incorrect information within the meaning of the ``Suspension of Payment'' paragraph of the electronic funds transfer (EFT) clause of this contract.

(2) The Contractor shall not change the name or address for EFT payments or manual payments, as appropriate, in the SAM record to reflect an assignee for the purpose of assignment of claims (see FAR subpart 32.8, Assignment of Claims). Assignees shall be separately registered in the SAM. Information provided to the Contractor's SAM record that indicates payments, including those made by EFT, to an ultimate recipient other than that Contractor will be considered to be incorrect information within the meaning of the ``Suspension of Payment'' paragraph of the EFT clause of this contract.

(3) The Contractor shall ensure that the DUNS number is maintained with Dun & Bradstreet throughout the life of the contract. The Contractor shall communicate any change to the DUNS number to the Contracting Officer within 30 days after the change, so an appropriate modification can be issued to update the data on the contract. A change in the DUNS number does not necessarily require a novation be accomplished. Dun & Bradstreet may be contacted—

(i) Via the internet at http://fedgov.dnb.com/webform or if the

Contractor does not have internet access, it may call Dun and

Bradstreet at 1-866-705-5711 if located within the United States; or

(ii) If located outside the United States, by contacting the local Dun and Bradstreet office.

(d) Contractors may obtain additional information on registration and annual confirmation requirements at https://www.acquisition.gov.

(End of clause)

52.212-1 INSTRUCTIONS TO OFFERORS--COMMERCIAL ITEMS (APR 2014)

(a) North American Industry Classification System (NAICS) code and small business size standard. The NAICS code and small business size standard for this acquisition appear in Block 10 of the solicitation cover sheet (SF 1449). However, the small business size standard for a concern which submits an offer in its own name, but which proposes to furnish an item which it did not itself manufacture, is 500 employees.

(b) Submission of offers. Submit signed and dated offers to the office specified in this solicitation at or before the exact time specified in this solicitation. Offers may be submitted on the SF 1449, letterhead stationery, or as otherwise specified in the solicitation. As a minimum, offers must show--

(1) The solicitation number;

(2) The time specified in the solicitation for receipt of offers;

(3) The name, address, and telephone number of the offeror;

(4) A technical description of the items being offered in sufficient detail to evaluate compliance with the requirements in the solicitation. This may include product literature, or other documents, if necessary;

(5) Terms of any express warranty;

(6) Price and any discount terms;

(7) "Remit to" address, if different than mailing address;

(8) A completed copy of the representations and certifications at FAR 52.212-3 (see FAR 52.212-3(b) for those representations and certifications that the offeror shall complete electronically);

(9) Acknowledgment of Solicitation Amendments;

(10) Past performance information, when included as an evaluation factor, to include recent and relevant contracts for the same or similar items and other references (including contract numbers, points of contact with telephone numbers and other relevant information); and

(11) If the offer is not submitted on the SF 1449, include a statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation. Offers that fail to furnish required representations or information, or reject the terms and conditions of the solicitation may be excluded from consideration.

(c) Period for acceptance of offers. The offeror agrees to hold the prices in its offer firm for 30 calendar days from the date specified for receipt of offers, unless another time period is specified in an addendum to the solicitation.

(d) Product samples. When required by the solicitation, product samples shall be submitted at or prior to the time specified for receipt of offers. Unless otherwise specified in this solicitation, these samples shall be submitted at no expense to the Government, and returned at the sender's request and expense, unless they are destroyed during preaward testing.

(e) Multiple offers. Offerors are encouraged to submit multiple offers presenting alternative terms and conditions or commercial items for satisfying the requirements of this solicitation. Each offer submitted will be evaluated separately.

(f) Late submissions, modifications, revisions, and withdrawals of offers:

(1) Offerors are responsible for submitting offers, and any modifications, revisions, or withdrawals, so as to reach the Government office designated in the solicitation by the time specified in the solicitation. If no time is specified in the solicitation, the time for receipt is 4:30 p.m., local time, for the designated Government office on the date that offers or revisions are due.

(2)(i) Any offer, modification, revision, or withdrawal of an offer received at the Government office designated in the solicitation after the exact time specified for receipt of offers is “late” and will not be considered unless it is received before award is made, the Contracting Officer determines that accepting the late offer would not unduly delay the acquisition; and--

(A) If it was transmitted through an electronic commerce method authorized by the solicitation, it was received at the initial point of entry to the Government infrastructure not later than 5:00 p.m. one working day prior to the date specified for receipt of offers; or

(B) There is acceptable evidence to establish that it was received at the Government installation designated for receipt of offers and was under the Government's control prior to the time set for receipt of offers; or

(C) If this solicitation is a request for proposals, it was the only proposal received.

(ii) However, a late modification of an otherwise successful offer, that makes its terms more favorable to the Government, will be considered at any time it is received and may be accepted.

(3) Acceptable evidence to establish the time of receipt at the Government installation includes the time/date stamp of that installation on the offer wrapper, other documentary evidence of receipt maintained by the installation, or oral testimony or statements of Government personnel.

(4) If an emergency or unanticipated event interrupts normal Government processes so that offers cannot be received at the Government office designated for receipt of offers by the exact time specified in the solicitation, and urgent Government requirements preclude amendment of the solicitation or other notice of an extension of the closing date, the time specified for receipt of offers will be deemed to be extended to the same time of day specified in the solicitation on the first work day on which normal Government processes resume.

(5) Offers may be withdrawn by written notice received at any time before the exact time set for receipt of offers. Oral offers in response to oral solicitations may be withdrawn orally. If the solicitation authorizes facsimile offers, offers may be withdrawn via facsimile received at any time before the exact time set for receipt of offers, subject to the conditions specified in the solicitation concerning facsimile offers. An offer may be withdrawn in person by an offeror or its authorized representative if, before the exact time set for receipt of offers, the identity of the person requesting withdrawal is established and the person signs a receipt for the offer.

(g) Contract award (not applicable to Invitation for Bids). The Government intends to evaluate offers and award a contract without discussions with offerors. Therefore, the offeror's initial offer should contain the offeror's best terms from a price and technical standpoint. However, the Government reserves the right to conduct discussions if later determined by the Contracting Officer to be necessary. The Government may reject any or all offers if such action is in the public interest; accept other than the lowest offer; and waive informalities and minor irregularities in offers received.

(h) Multiple awards. The Government may accept any item or group of items of an offer, unless the offeror qualifies the offer by specific limitations. Unless otherwise provided in the Schedule, offers may not be submitted for quantities less than those specified. The Government reserves the right to make an award on any item for a quantity less than the quantity offered, at the unit prices offered, unless the offeror specifies otherwise in the offer.

(i) Availability of requirements documents cited in the solicitation. (1)(i) The GSA Index of Federal Specifications, Standards and Commercial Item Descriptions, FPMR Part 101-29, and copies of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained for a fee by submitting a request to--GSA Federal Supply Service Specifications Section, Suite 8100, 470 East L'Enfant Plaza, SW, Washington, DC

20407, Telephone (202) 619-8925, Facsimile (202) 619-8978.

(ii) If the General Services Administration, Department of Agriculture, or Department of Veterans Affairs issued this solicitation, a single copy of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained free of charge by submitting a request to the addressee in paragraph (i)(1)(i) of this provision. Additional copies will be issued for a fee.

(2) Most unclassified Defense specifications and standards may be downloaded from the following ASSIST websites:

(i) ASSIST (https://assist.dla.mil/online/start/).

(ii) Quick Search (http://quicksearch.dla.mil/).

(iii) ASSISTdocs.com (http://assistdocs.com).

(3) Documents not available from ASSIST may be ordered from the Department of Defense Single Stock Point (DoDSSP) by--

(i) Using the ASSIST Shopping Wizard (https://assist.dla.mil/wizard/index.cfm);

(ii) Phoning the DoDSSP Customer Service Desk (215) 697-2179, Mon-Fri, 0730 to 1600 EST; or

(iii) Ordering from DoDSSP, Building 4, Section D, 700 Robbins Avenue, Philadelphia, PA 19111-5094, Telephone (215) 697-2667/2179, Facsimile (215) 697-1462.

(4) Nongovernment (voluntary) standards must be obtained from the organization responsible for their preparation, publication, or maintenance.

(j) Data Universal Numbering System (DUNS) Number. (Applies to all offers exceeding $3,000, and offers of $3,000 or less if the solicitation requires the Contractor to be registered in the System for Award Management (SAM) database. The offeror shall enter, in the block with its name and address on the cover page of its offer, the annotation “DUNS” or “DUNS +4” followed by the DUNS or DUNS +4 number that identifies the offeror's name and address. The DUNS +4 is the DUNS number plus a 4-character suffix that may be assigned at the discretion of the offeror to establish additional SAM records for identifying alternative Electronic Funds Transfer (EFT) accounts (see FAR Subpart 32.11) for the same concern. If the offeror does not have a DUNS number, it should contact Dun and Bradstreet directly to obtain one. An offeror within the United States may contact Dun and Bradstreet by calling 1-866-705-5711 or via the internet at http://fedgov.dnb.com/webform. An offeror located outside the United States must contact the local Dun and Bradstreet office for a DUNS number. The offeror should indicate that it is an offeror for a Government contract when contacting the local Dun and Bradstreet office.

(k) System for Award Management. Unless exempted by an addendum to this solicitation, by submission of an offer, the offeror acknowledges the requirement that a prospective awardee shall be registered in the SAM database prior to award, during performance and through final payment of any contract resulting from this solicitation. If the Offeror does not become registered in the SAM database in the time prescribed by the Contracting Officer, the Contracting Officer will proceed to award to the next otherwise successful registered Offeror. Offerors may obtain information on registration and annual confirmation requirements via the SAM database accessed through https://www.acquisition.gov.

(l) Debriefing. If a post-award debriefing is given to requesting offerors, the Government shall disclose the following information, if applicable:

(1) The agency's evaluation of the significant weak or deficient factors in the debriefed offeror's offer.

(2) The overall evaluated cost or price and technical rating of the successful and the debriefed offeror and past performance information on the debriefed offeror.

(3) The overall ranking of all offerors, when any ranking was developed by the agency during source selection.

(4) A summary of the rationale for award;

(5) For acquisitions of commercial items, the make and model of the item to be delivered by the successful offeror.

(6) Reasonable responses to relevant questions posed by the debriefed offeror as to whether source-selection procedures set forth in the solicitation, applicable regulations, and other applicable authorities were followed by the agency.

(End of provision)

52.212-1 (ADDENDUM) ADDITIONAL INSTRUCTIONS TO OFFERORS--COMMERCIAL ITEMS

Technical

The technical evaluation will be based on the following:

Offeror is to provide statement that they are providing parts specified in the solicitation and/or a technical description of the items being offered in sufficient detail to evaluate compliance with the requirements in the solicitation. This may include product literature, or other documents, if necessary.

Offeror is to provide statement that requested delivery date of 17 Nov 2014 can be met.

Price Quote

A separate unit price and extended price must be submitted for each line item. The price quote shall be evaluated in accordance with FAR 13.106-3 (a).

Responsible sources shall provide the following:

1. Price quote which identifies the requested item(s), unit price, and extended price

2. Total Firm Fixed Price

3. Prompt Payment Terms

4. Estimated time of delivery

5. Terms of express warranty

6. Remittance address, Tax Identification Number, DUNS number and CAGE Code

7. A completed copy of the representations and certifications at FAR 52.212-3 Alternate I or a statement stating that they are available via the ORCA website, http://orca.bpn.gov.

8. Responses to the solicitation are due 29 September 2014 at 1200 PM local time, Norfolk Va . LATE PROPOSALS MAY NOT BE CONSIDERED FOR EVALUATION. Proposals may be e-mailed to Dianne.Pope@navy.mil or faxed via 757-443-5953 Attn: Dianne Pope. Please reference the solicitation number on your proposal.

Primary Point of Contact:

Dianne Pope/ dianne.pope@navy.mil/ 757-443-5948 Secondary Point of Contact:

Henry Bijak / henry.bijak@navy.mil / 757-443-5959

9. Offers submitted in response to this solicitation shall not contain nor be subject to the offeror's standard commercial terms and conditions. Any offer submitted in response to this solicitation which includes the offeror's standard commercial terms and conditions may be considered a material defect and may be rejected as being non-responsive to the solicitation.

10. Offerors must submit completed certifications and representtations with their quote. Completed certifications and representations are a material condition of award.

Past Performance

Commercial item procurements using simplified acquisition procedures of FAR Part 13 per the Clinger-Cohen Test Program per FAR Subpart 13.5 are not subject to the past performance procedures and requirements of FAR Subpart 15.3.

Basis For Award

Award will be made to the responsible, technically acceptable quoter, whose quote, confirming to the solicitation, offers the lowest evaluated price.

(End of Addendum)

52.212-2 EVALUATION--COMMERCIAL ITEMS (JAN 1999)

(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

Price

(b) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(End of provision)

BASIS FOR AWARD:

Award will be made to the responsible quoter, whose quote, conforming to the Request for Quotation, offers the lowest evaluated price.

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS--COMMERCIAL ITEMS (JULY 2014)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.222-50, Combating Trafficking in Persons (FEB 2009) (22 U.S.C. 7104(g)).

___ Alternate I (Aug 2007) of 52.222-50 (22 U.S.C. 7104(g)).

(2) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(3) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items: (Contracting Officer check as appropriate.)

__X_ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995) (41 U.S.C. 4704 and 10 U.S.C. 2402).

____ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Apr 2010) (41 U.S.C. 3509).

____ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (June 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

_X__ (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (July 2013) (Pub. L. 109-282) (31 U.S.C. 6101 note).

___ (5) [Reserved]

___ (6) 52.204-14, Service Contract Reporting Requirements (JAN 2014) (Pub. L. 111-117, section 743 of Div. C).

___ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (JAN 2014) (Pub. L. 111-117, section 743 of Div. C).

__X_ (8) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Aug, 2013) (31 U.S.C. 6101 note).

____ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (July 2013) (41 U.S.C. 2313).

__X__ (10) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (MAY 2012) (section 738 of Division C of Pub. L. 112-74, section 740 of Division C of Pub. L. 111-117, section 743 of Division D of Pub. L. 111-8, and section 745 of Division D of Pub. L. 110-161).

____ (11) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (NOV 2011) (15 U.S.C. 657a).

____ (12) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Jan 2011) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

____ (13) [Reserved]

____ (14)(i) 52.219-6, Notice of Total Small Business Set-Aside (NOV 2011) (15 U.S.C. 644).

____ (ii) Alternate I (NOV 2011).

____ (iii) Alternate II (NOV 2011).

____ (15)(i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644).

____ (ii) Alternate I (Oct 1995) of 52.219-7.

____ (iii) Alternate II (Mar 2004) of 52.219-7.

__X__ (16) 52.219-8, Utilization of Small Business Concerns (MAY 2014) (15 U.S.C. 637(d)(2) and (3).

____ (17)(i) 52.219-9, Small Business Subcontracting Plan (July 2013) (15 U.S.C. 637(d)(4)).

____ (ii) Alternate I (Oct 2001) of 52.219-9.

____ (iii) Alternate II (Oct 2001) of 52.219-9.

____ (iv) Alternate III (Jul 2010) of 52.219-9.

____ (18) 52.219-13, Notice of Set-Aside of Orders (NOV 2011) (15 U.S.C. 644(r)).

____ (19) 52.219-14, Limitations on Subcontracting (NOV 2011) (15 U.S.C. 637(a)(14)).

____ (20) 52.219-16, Liquidated Damages—Subcon-tracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i)).

____ (21)(i) 52.219-23, Notice of Price Evaluation Adjustment for Small Disadvantaged Business Concerns (Oct 2008) (10 U.S.C. 2323) (if the offeror elects to waive the adjustment, it shall so indicate in its offer).

____ (ii) Alternate I (June 2003) of 52.219-23.

____ (22) 52.219-25, Small Disadvantaged Business Participation Program—Disadvantaged Status and Reporting (July 2013) (Pub. L. 103-355, section 7102, and 10 U.S.C. 2323).

____ (23) 52.219-26, Small Disadvantaged Business Participation Program— Incentive Subcontracting (Oct 2000) (Pub. L. 103-355, section 7102, and 10 U.S.C. 2323).

____ (24) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (NOV 2011) (15 U.S.C. 657f).

_X___ (25) 52.219-28, Post Award Small Business Program Rerepresentation (July 2013) (15 U.S.C. 632(a)(2)).

____ (26) 52.219-29, Notice of Set-Aside for Economically Disadvantaged Women-Owned Small Business (EDWOSB) Concerns (July 2013) (15 U.S.C. 637(m)).

____ (27) 52.219-30, Notice of Set-Aside for Women-Owned Small Business (WOSB) Concerns Eligible Under the WOSB Program (July 2013) (15 U.S.C. 637(m)).

__X__ (28) 52.222-3, Convict Labor (June 2003) (E.O. 11755).

__X__ (29) 52.222-19, Child Labor—Cooperation with Authorities and Remedies (JAN 2014) (E.O. 3126).

__X__ (30) 52.222-21, Prohibition of Segregated Facilities (Feb 1999).

__X__ (31) 52.222-26, Equal Opportunity (Mar 2007) (E.O. 11246).

__X__ (32) 52.222-35, Equal Opportunity for Veterans (Jul 2014)(38 U.S.C. 4212).

__X__ (33) 52.222-36, Equal Opportunity for Workers with Disabilities (July 2014) (29 U.S.C. 793).

__X__ (34) 52.222-37, Employment Reports on Veterans (July 2014) (38 U.S.C. 4212).

__X__ (35) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496).

____ (36) 52.222-54, Employment Eligibility Verification (Aug 2013). (Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.)

____ (37)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated Items (May 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

____ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

____ (38) (i) 52.223-13, Acquisition of EPEAT® Registered Imaging Equipment (Jun 2014)+(E.O.s 13423 and 13514).

____ (ii) Alternate I (Jun 2014) of 52.223-13.

____ (39)(i) 52.223-14, Acquisition of EPEAT® Registered Televisions (Jun 2014) (E.O.s 13423 and 13514).

____ (ii) Alternate I (Jun 2014) of 52.223-14.

____ (40) 52.223-15, Energy Efficiency in Energy-Consuming Products (Dec 2007) (42 U.S.C. 8259b).

____ (41)(i) (i) 52.223-16, Acquisition of EPEAT® -Registered Personal Computer Products (Jun 2014) (E.O.s 13423 and 13514).

____ (ii) Alternate I (Jun 2014) of 52.223-16.

__X__ (42) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011) (E.O. 13513).

____ (43) 52.225-1, Buy American--Supplies (May 2014) (41 U.S.C. chapter 83).

____(44) (i) 52.225-3, Buy American--Free Trade Agreements--Israeli Trade Act (May 2014) (41 U.S.C. chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub. L.

103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.

____ (ii) Alternate I (May 2014) of 52.225-3.

____ (iii) Alternate II (May 2014) of 52.225-3.

____ (iv) Alternate III (May 2014) of 52.225-3.

____ (45) 52.225-5, Trade Agreements (Nov 2013) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

___X_ (46) 52.225-13, Restrictions on Certain Foreign Purchases (June 2008) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

____ (47) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Jul 2013) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

____ (48) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150

____ (49) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C. 5150).

____ (50) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41 U.S.C. 4505, 10 U.S.C. 2307(f)).

____ (51) 52.232-30, Installment Payments for Commercial Items (Oct 1995) (41 U.S.C. 4505, 10 U.S.C. 2307(f)).

__X__ (52) 52.232-33, Payment by Electronic Funds Transfer—System for Award Management (July 2013) (31 U.S.C. 3332).

____ (53) 52.232-34, Payment by Electronic Funds Transfer—Other than System for Award Management (July 2013) (31 U.S.C. 3332).

____ (54) 52.232-36, Payment by Third Party (MAY 2014) (31 U.S.C. 3332).

____ (55) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a).

__X__ (56)(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx. 1241(b) and 10 U.S.C. 2631).

____ (ii) Alternate I (Apr 2003) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c),…