SOW-Master_Gauge_-_Attach_1.pdf

Statement of Work

BS-650013.APN7METCAL93- PHY/DIM OPT CALSTDS

A. Background

The use of NAVAIR METCAL equipment funding is to procure Calibration Standards (CALSTDs) and ancillary equipment for Aviation Fleet Intermediate Calibration Activities, Fleet Training Activities and

Aviation Navy Calibration Laboratories (NCLs) to support Aviation Organizational and Intermediate (I) level maintenance assets. All Cal Standards listed for procurement must first go through an approval process. This process includes: initial submission by the fleet; review and prioritization by the Fleet TYCOM’s; laboratory workload justification and standardization review by a NAVAIR METCAL technical review team; overall procurement strategy review to assess overall program objectives, priorities and funding.

REQUIREMENTS:

1. Mfr. one year warranty with sticker affixed to each unit plus a warranty certificate.

2. Calibration Certificate and calibration sticker (as applicable for each unit)

3. Units (over $5,000) shall have an IUID Label applied per DFAR 252.211-7003.

DFARS SUBPART 227.71 - Rights in Technical Data

4. The US government shall have limited technical data rights for all technical manuals and documents furnished with the procured commercial items, for the purpose of Government use only in duplicating or posting technical documentation to limited access web sites for use by US Government Personnel and Contractors engaged in maintenance, calibration or related logistics activities associated with the procured commercial items in accordance with DFARS 252.227-7015 Technical Data--Commercial Items.

B. Tasking:

The contractor shall provide the following equipment without substitutions:

1) P/N 3461-35-1000 Master Gauge Assembly, 1000 psi Oxygen Cleaned QTY 3

2) P/N 3461-35-200 Master Gauge Assembly, 200 psi Oxygen Cleaned Qty 3

3) P/N 3461-35-30 Master Gauge Assembly, 30 psi, Oxygen Cleaned Qty 3

Each item listed above will have the following characteristics:

a. Bourdon Tube Style Pressure Gauge with Bleeder Tip

b. 6” mirrored dial with black numerals on white face

c. Units of measure: PSI

d. Accuracy of 0.1% of gauge range, including hysteresis

e. High pressure quick-disconnect probe connection fitting with integrated pressure relief valve.

f. NIST Traceable Calibration Certificate

g. Calibration label

h. Warranty label

i. Oxygen Clean Certificate

4) P/N 3712-20-1000 Master Gauge Qty 15

5) P/N 3712-20-10000 Master Gauge Qty 15

6) P/N 3712-20-15 Master Gauge Qty 10

7) P/N 3712-20-200 Master Gauge Qty 9

8) P/N 3712-20-2000 Master Gauge Qty 10

Item numbers 4 thru 8 will have the following characteristics and include the following without substitutions:

a. Bourdon Tube Style Pressure Gauge with Bleeder Tip

b. 6” mirrored dial with black numerals on white face

c. Accuracy of 0.1% of gauge range, including hysteresis

d. Units of measure: PSI and KPa.

e. NIST Traceable Calibration Certificate

f. Calibration label

g. Warranty label

C. Deliverables

Delivery of the equipment shall be provided at the following address:

COMMANDER

NAVAIR Calibration Standards MCAS, Attn: Lou Cerrillo (UIC N48535)BLDG 612, Bay 9

Beaufort, SC 29904-5002

D. Delivery Date

Delivery shall be no later than 75 days after award of contract.

***PARTIAL SHIPMENT ACCECPTED***

E. Invoicing

All invoicing shall be submitting into Wide Area Workflow for payment after ALL material is received in the condition as stated in section B.