N00421-13-T-0398-0002.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83)

Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this amendment is to correct and add information in the statement of w ork pertaining to Items 0016 & 0017.

1. CONTRACT ID CODE PAGE OF PAGES

1 5

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 03-Sep-2013

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X N00421-13-R-0087

X 9B. DATED (SEE ITEM 11)

01-Aug-2013

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE

RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

03-Sep-2013

CODE

NAVAL AIR WARFARE CENTER AD-PAX ANNEX 1

CODE 2.5.1.12

21983 BUNDY ROAD

BLDG 441

PATUXENT RIVER MD 20670

N00421 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

N00421-13-R-0087

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION C - DESCRIPTIONS AND SPECIFICATIONS

The following have been modified:

SECTION C INFORMATION

Items 0001 - 0015, and Option Items 1001 - 1015, 2001 - 2015, 3001 - 3015, and 4001 - 4015 – The contractor shall provide supplies and services in accordance with the Section C Statement of Work to support AIR 5.1.6.

Item 0016 and Option Items 1016 - 4016 – The data to be furnished hereunder shall be in accordance with the

Exhibit A, DD Form 1423, Contract Data Requirements List, and the Section C Statement of Work.

STATEMENT OF WORK

Item 0001- Standard 6DoF (CLIN 0008AA)

Self powered unit with a tri-axial accelerometer and a tri-axial rate gyro configuration, internal processing, transmitter, and is sized to fit within a MK80 series fuze well (Threshold). With the ability to accept one input, Table 1 (Objective), (See Table 2 for threshold and objective requirements for components). Units shall be calibrated based on standards listed under Recalibration. The 6Dof shall survive and function properly throughout the entire flight envelope of all Navy, Marine Corps, Air Force, and Army aircraft/weapon systems. The 6DoF shall have the ability to align the sensors to either aircraft coordinate or earth coordinate systems. The 6DoF should have all supporting software and documentation for operation. Software shall allow for but is not limited to setting bit rate, TM frequencies, sensor range values, filter settings for each sensor, and allow for pre-flight checkout for proper function.

Item 0002– Enhanced 6DoF (CLIN 0008AB)

Contains everything in the Standard 6DoF plus the ability to utilize up to sixteen (threshold) and thirty two

(objective) internal/external sensors, Table 1 via external input modules. (See Table 2 for threshold and objective requirements for components). Units shall be calibrated based on standards listed under Recalibration.

Item 0003– Miniature 6DoF (CLIN 0008AC)

Contains everything in the Standard 6DoF but is sized to fit inside of a cylinder of 0.9 in radius – 9 in height (threshold) and 0.75 in radius – 5 in height (objective). Lower wattage for transmitter is acceptable with a flight worthy airborne receiver/recorder/rerad combination, provided normal aircraft transmitters do not interfere with lower wattage signal. (See Table 2 for threshold and objective requirements for components). Units shall be calibrated based on standards listed under Recalibration.

Item 0004– P/N XX External Input Module

This item is designed to be an easy to change plug in module for multiple different input options. Table 1 contains a sample list of known types of external input modules, but this is not a complete list as configurations continually change. The intent of this list is to have the ability to purchase any of these type of external input modules for the same price with type being a subgroup to allow flexibility in purchasing.

Item 0005– Monopole Antenna

Either stick or blade antenna is acceptable. Antenna should be optimized for center around 2250 MHz and allow for <10% signal loss at 2200 or 2299 MHz. Antennas should use standard SMA connectors. Antenna shall have a positive means for securing (Safety wire hole or locking nuts based on antenna design).

Item 0006– P/N XX Extension control cable

Allow for communication with/recharging of 6DoF units when installed in a store and/or direct connection to the 6DoF is not available. This cable should allow for the same functions as if directly connected to the 6DoF.

The connector on the extension cable cannot exceed the size of a DB9 standard connector (See Table 2).

Item 0007 – P/N XX Extension RF Cable

Allow for remote installation of antenna when 6doF is installed inside of a store. Shall have SMA connectors on either side M/F (See Table 2).

Item 0008– Recalibration

Once the unit has been received by the contractor, the contractor will calibrate the sensors in the 6DoF to the original specification. The contractor shall calibrate each unit using standards of OPNAV INST 3960.16A

NAVY TEST, MEASUREMENT, AND DIAGNOSTIC EQUIPMENT (TMDE), AUTOMATIC TEST SYSTEMS

(ATS), AND METROLOGY AND CALIBRATION (METCAL). If new methods or procedures of calibration are desired, they must first be approved by the Contracting Officer’s Representative (COR). The contractor shall provide a Calibration Record for each unit that is re-calibrated (CDRL A001). The Calibration Record shall be provided in electronic form within one week from the time the unit was calibrated. After the units are calibrated, the contractor shall affix a new calibration indicator on the unit. The Contractor shall return the calibrated unit(s) back to the government facility within two weeks of receipt.

Item 0009– Memory Upgrade non volatile

This is an upgrade option to the 6DoF units to allow for internal storage of measured data per requirements of Table 2. This memory must retain all recorded data in the event of a power loss and shall not write over existing data on restart. The memory must survive the flight envelope of the 6DoF (threshold) with the objective to be crash/impact survivable (>1000g).

Item 0010– Repackaging for special installations

This line item is to cover the NRE and production costs for specific mounting applications. Repackaging will be negotiated at a cost basis at the delivery order level.

Item 0011– Airborne Data Recorder/Receiver

The airborne data recorder/receiver must be able to receive and record all transmissions from all versions of the 6DoFs. The airborne data recorder shall fit inside of a MK 80 fuze well and utilize the same mounting hardware as the standard 6DoFs. The memory inside of the airborne data recorder shall comply with the memory standards, Table 2. Software to control the airborne data recorder/receiver shall be part of the standard 6DoF software or shall meet the same standards. Threshold is to receive and record one 6DoF TM stream; Objective is to receive multiple by auto switching to a second stream based on an event in the data.

Item 0012– Ground Data Recorder/Receiver

The ground data recorder/receiver must be able to receive and record all transmissions from all versions of the 6DoFs. The ground data recorder shall have a size that is comparable to a standard 15 in. laptop and shall be self powered and ruggedized for flight line use. The memory inside of the airborne data recorder shall comply with the memory standards, Table 2. Software to control the ground data recorder/receiver shall be part of the standard 6DoF software or shall meet the same standards. Threshold is to receive and record one 6DoF TM stream with real time monitoring of data through the recorder/receiver or through a connected laptop; Objective is to have an automated checkout ability to verify proper 6DoF configuration and function prior to a test event.

Item 0013– Retransmit Upgrade to Airborne Data Record (2W upto 5W)

The airborne data retransmitter must be able to interface with the Airborne Data Recorder/Receiver and retransmit all data from all versions of the 6DoFs on a different frequency then it was received on. The airborne data retransmitter shall fit inside of a MK 80 fuze well and utilize the same mounting hardware as the standard

6DoFs. Software to control the airborne data retransmitter shall be part of the standard 6DoF software or shall meet the same standards. Threshold is to retransmit one 6DoF TM stream; Objective is to have iNet like capability.

Item 0014– Operating Components for 6DoF

This kit is comprised of all hardware necessary for the operation of the 6DoF that is not expended during a mission. This includes charging the 6DoFs, Programming/Configuring the 6DoF, and Activating the 6DoF prior to a mission.

Item 0015– External Accelerometer Tri-Axial XX YY (CLIN 0008AD)

This item covers external tri-axial accelerometers that shall be compatible with one of the external input modules where XX is Gs +/- and YY is analog filter. The intent of this list is to have the ability to purchase any of the external accelerometers for the same price with the G and filter being subgroups. Accelerometers shall work with one external input module, Table 1, and meet the requirements of Table 2.

Item 0016– Administrative/Technical Data

After Instrumentation Recalibration and upon initial delivery of a calibrated item, the Contractor shall provide Contract Data Requirements List (CDRL), DD Form 1423 reports, in accordance with Exhibits A001.

Item 0017– Over and Above Direct Parts and Materials

The Contractor shall provide over and above direct parts and materials in accordance with Section 5.6, “Over and Above Maintenance,” under Attachment 1, SOW, and NAVAIR 5252.217-9507, “Over and Above Work

Request” Clause.

Table 1 External Input Types

CLINS Sensor Type Number of Inputs

Threshold Objective

0004AA Strain Gauge 5 V excitation 2 4

0004AB Accelerometer 3 3 + Temp

0004AC 0 to 5 V input 9V excitation 3 4 or 3 +

Temp

0 to 5 V input 5V excitation 3 4 or 3 +

Temp

-2.5 to 2.5 V input 9V excitation 3 4 or 3 +

Temp

-5 to 5 V input 9V excitation 3 4 or 3 +

Temp

0 to 10 V input 9V excitation 3 4 or 3 +

Temp

-10 to 10 V input 9V excitation 3 4 or 3 +

Temp

0004AD 0 to 5 V input 5V excitation (100,000 samples/sec)

1 4

0004AE -500 to 500 V DC/AC input 1 4

0004AF Digital input (RS422, RS232, RS485, and/or Optical)

1 4

0004AG Dual FMU-139 Simulator for use with -

500 to 500 V

1 1

0004AH GPS Commercial DOD/NSA

Table 2

Parameter Threshold Objective

Sensor Operating Range

Acceleration and Rate

±50g (+/- 15g for miniature)

±1200 deg.sec.

±100g

±2000 deg.sec.

Data Accuracy

Position and Attitude

± 1 in. (first 2 sec.) ± 1 ft. (1 min.)

± 1 deg. (first 2 sec.) ± 10 deg. (1 min.)

Accelerometer

Noise Density: 2 mg/√Hz

Sensitivity Drift: ±2%

Zero Bias Drift: ±0.5g

Alignment: ±1°

Noise Density: 0.05 mg/√Hz

Sensitivity Drift: ±2%

Zero Bias Drift: ±0.1g

Alignment: ±0.5°

Gyros

Noise Density: 0.1°/sec/√Hz

Sensitivity Drift: ±5%

Zero Bias Drift: ±3°/sec.

Noise Density: 0.05°/sec/√Hz

Sensitivity Drift: ±2.5%

Zero Bias Drift: ±2°/sec.

Resolution 16 bit

Sample Rate 3000 Hz

5000 Hz (Store Separation)

6000 Hz (Missiles)

20,000 Hz (Captive Carriage)

Filter 5 pole Butterworth analog prior to digitizer (user selectable) all channels

Battery Operating Time 2 hrs. 4 hrs.

TM Range (Re-rad scenario) 10m (to aircraft release to ground impact) 30m

TM Frequencies S-Band 2200-2299 user selectable S-Band and C-Band

TM Wattage 0.5W

5 W ReRad

0.5 to 2 W selectable

5 to 10 W selectable for ReRad

TM Encoding NRZ-L; RNRZ-L Bi Phase; RS485

Usable Frequencies at one time (flight) without TM overlap

100 (can use real time frequency allocation or delayed turn on to prevent frequency overlap)

TM Delay/Repeat Individual channels 4 sec delay time Individual channels or entire data stream 4 sec delay time – does not require memory upgrade

Memory Storage (when utilized) 2 hrs

= to battery life

Data Recovery over secondary TM (RF/Network/WiFi/Bluetooth/USB)

Memory Download Download and Reset for next use <= battery recharge time <5 min

DSU-33 Adapter Needs to match DSU-33 scalloped shaped, Ref drawing 1, Raydome may be GFE or bid on

Can be utilized in aft fuze well without modification to bomb body

MXU-735 Adapter Needs to match MXU-735 shape, Ref drawing 2

Aft Fuze Well Adapter Can be DSU-33 Adapter Based or unique design

Health Parameters Serial Number, Battery Voltage, Frame counter IRIG Time, Battery Current, CRC (Cyclic

Redundancy Check)

Encryption 128 Bit WEP Accepts NSA Encryption Card

(End of Summary of Changes)