SOLICITATION.pdf

1.

2.

3.

4.

Section A - Solicitation/Contract Form

FORGED STEPPED SHAFT

This is a combined synopsis/solicitation for commercial products prepared in accordance with part 12. This announcement constitutes the only solicitation. Offers are being requested and a separate written solicitation will not be issued.

Solicitation number N0040627R0005 is issued as a Request for Quote (RFQ) for FORGED STEPPED SHAFT (Qty:2), K500 ALLOY, HOT FINISHED AND AGED HARDENED in accordance with QQ-N-286H, FORM 7, and must adhere to the Non- Manufacturer Rule (RFO 52.219-33). Additionally, a Certificate of Chemical and Physical Properties is required, as well as a Slow Strain Rate Tensile Test Result.

This acquisition is set-aside for small business concerns. The solicitation incorporates provisions and clauses in effect through the current Federal Acquisition Circular (FAC) 2026-01 with an effective date of March 13, 2026. The full text of all FAR provisions and clauses may be accessed electronically at Acquisition.gov. This solicitation incorporates provisions and clauses by reference. The full text of provisions and clauses may be accessed electronically at www.acquisition.gov.

The NAICS CODE is 332999 and the Small Business Size Standard is 750.

The Government intends to award a firm fixed price (FFP) purchase order that meets the specifications outlined below. The proposed contract action is for commercial supplies for which the Government intends to solicit as 100% Small Business Set-Aside. Interested parties may identify their interest and capability to respond to the requirement and submit quotes. Determination by the Government not to compete with this proposed contract based upon responses to this notice is solely within the discretion of the Government.

The Government will award a contract resulting from this solicitation without discussions to the responsible offeror whose quote, conforming to the solicitation that represents the best value to the Government, price, delivery, technical acceptability, past performance, and other factors considered.

QUESTIONS: Offerors may submit their questions regarding clarification of solicitation requirements to the Contract Specialist: Brian Devine Jr by email at brian.e.devine2.civ@us.navy.mil, no later than 2 days before closing of the solicitation. Any questions received after this deadline may not be answered.

System for Award Management (SAM). Quoting vendors must be registered in the SAM database to be considered for award.

Registration is free and can be completed on-line at http://sam.gov/.

To be considered for this opportunity, all quotes shall be submitted in either Microsoft Word, Excel spreadsheet or Adobe PDF.

Quotes must include price(s), FOB Origin, a point of contact, name and phone number, business size, and payment terms. An award will be made based on Best Value. Each quote must clearly indicate the capability of the vendor to meet all specifications and/or requirements in the SOW. Vendors shall provide a detailed (unpriced) capabilities statement for review and acceptance by the Technical POC. Responses to this solicitation are due by 1300 PST (1:00 PM PST) on 11/18/2026. Please email proposals to Brian Devine Jr at brian.e.devine2.civ@us.navy.mil.

Quotes shall be valid for sixty (60) days (at minimum).

Quote packages shall contain the following information:

Official Company Name;

Point of contact including name and phone number; and Cage Code number.

Authorized Distributor Letter from Original Equipment Manufacturer

See attached solicitation for a list of line item number(s) and items, quantities, and units of measure.

The Point of Contact for this acquisition is Brian Devine Jr, brian.e.devine2.civ@us.navy.mil. Secondary

Point of Contact is Homer Shoup, homer.o.shoup.civ@us.navy.mil

Quote packages are due by 11/18/2026 at 1300 PST (1:00 PM PST).

N0040627R0005

Section B - Supplies or Services & Prices or Costs

Additional Information/Notes

Item Supplies/Service Quantity Unit Unit Price Amount

STEPPED SHAFT, FORGED ALLOY K500 (UNS N05500),

TESTING IN ACCORDANCE WITH: QQ-N-286H, FORM 7, HOT

FINISH AND AGED HARDENED, WITH THE FOLLOWING

PHYSICAL PROPERTIES:

TENSILE: 140,000 PSI MIN

YEILD: 100,000 PSI MIN

ELONG IN 2" 20 % MIN

SIZE: 370 MM OD X 130 MM LENGTH + 262 MM OD X 2,470

MM LENGTH (TOTAL LENGTH: 2,600 MM)

Certificate of Chemical and Physical Properties Required Slow Strain Rate Tensile Test Results Required as "Information Only" Nonmanufacturer Rule Applies (RFO 52.219-33): PLEASE LIST THE

SMALL BUSINESS MANUFACTURER USED, IF APPLICABLE

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

Pricing Arrangement: Firm Fixed Price

2 Each

Section C - Description/Specifications/Statement of Work

Requirements

FORGED STEPPED SHAFT, K500 ALLOY, HOT FINISH AND AGED HARDENED TO QQ-N-286H

SPECIFICATIONS

Section D - Packaging and Marking

Additional Regulation or Supplemental Clauses Incorporated by Full Text

FLCPS SRF 007 FLCPS_SRF_DELIVERY (Aug 2025)

PREPARATION FOR DELIVERY (COMMERCIALLY PACKAGED ITEMS)

(a) shall be in accordance with ASTM-D-3951 (most current edition), "Standard for Commercial Packing." The Preservation, packaging, and packing unit pack quantity that applies to items under this contract is "Industry Standard".

(b) The use of asbestos, excelsior, loose fill polystyrene, newspaper or shredded paper (all types including waxed paper, Prohibited Packing Materials.

computer paper and similar hydroscopic or non-neutral material) is prohibited.

(c) All non-manufactured wood utilized in wood pallets and wood containers shall be heat treated to a minimum Non-Manufactured Wood Packing.

core temperature of 56 degrees centigrade for 30 minutes and certified by an accredited agency recognized by the American Lumber Standards Committee (ALSC). Refer to https://www.aphis.usda.gov/aphis/ourfocus/planthealth/import-information/wood-packaging-material for wood packing policy, enforcement regulations and accredited agencies. Non-coniferous (hardwood) and manufactured wood, such as particleboard and plywood, are exempt from this requirement.

(d) , such as particleboard and plywood, are exempt from this requirement.Manufactured wood

(e) Packing must be sufficient to ensure safe delivery to the final destination without the need for additional repackaging or repair.

(f) All materials shall be packed to withstand multiple modes of transport (truck, rail, sea, or air) and handling by forklifts or cranes.

(g) Heavy items must be crated or skid-mounted to distribute weight evenly and ensure lifting point are accessible and marked.

(h) Packages must be stable, not exceed safe stacking limits, and be secured against movement in transit.

MARKING OF SHIPMENTS (COMMERCIALLY PACKAGED ITEMS)

(i) Marking shall be in accordance with ASTM-D-3951 (most current edition) and with the information set forth in paragraph (ii) below. Unless specified elsewhere in this contract/order, bar coding is not required.

(ii) All unit and exterior containers/packs shall, as a minimum, be marked as follows:

1. National stock number (NSN), when available, or Federal stock number (FSN), when NSN is not available, or part number when neither NSN or FSN are available.

2. Noun nomenclature cited on contract or order.

3. Quantity and unit of issue.

4. Contract, or order number.

5. From:_______________________________________________ (Contractor's Name) (Address)

6. To: (See delivery address on page 3-4 or in Section F)

(iii) Markings may be applied by any means which provide legibility.

Metal plates, strips, sheets, bars, rods, angle stock, tubes, and pipe are to be packed for shipment as follows:

Plate, sheet, and strip must be packed in snug-fitting boxes reinforced with steel straps or in metal packs. Snug-fitting boxes are defined as fully enclosed rigid container having length, width, and depth.

Bar, rod, angle stock, pipe, and tube shall be packed in snug-fitting crates with solid wood ends or in boxes for protection. Snug-fitting crates are defined as a container of an open-frame construction.

Single pieces or bundles of steel stock must have a snug-fitting wood cap secured over each end.

Per DOD 4500.9-R, Defense Transportation Regulation (DTR), Part II, C, blocking and bracing is used to secure material in a container, on a skid, or in a conveyance (e.g., truck or railcar). Blocking is the use of cut pieces of dimensional lumber, typically fastened to the top deck of the structure or inside the container. Blocking is the used to provide a railing around the edge of the product to block the product in place to prevent shifting from side to side or front-to-back during transit. Bracing prevents the lateral movement of the product within the container. Braces are secured to the interior walls and at times to the inside top of the container. Per MIL-STD-2073 (latest version), unpreserved item(s) shall be protected from physcial damage and mechanical malfunction. Cushioning materials, dunnage, blocking and bracing shall be applied as required to protect the item(s) and the enclosing media and restrict the movement of the item within the container. Per MIL-STD-147 (latest version), provides guidance on unitization and banding of unit loads, i.e. container consolidation, placement on pallet or load base, securly binding materials together.

NOTE: Vendors are responsible for ensuring all cargo tendered to an Air Mobility Command (AMC) is packed, marked, labeled, and documented in accordance with the DTR 4500.9-R, Part II. It's extremely important to follow DTR and AMC process. If the sheet metal is not properly unitized and secured, the AMC can reject the shipment and the vendor will be responsible for all additional charges incurred. A Supply Discrepancy Report (SDR) against the vendor for non-compliant unitization may be submitted. Submitted SDRs will generate a report in the Supplier Performance Risk System (SPRS) impacting the vendor's future acquisitions. NFM may request a picture of the material packaged to ensure compliance prior to issuing labels.

TRACEABLE FREIGHT

The Contractor shall assume all responsibility for shipment to the specified destination. Shipment must be via a fully traceable commercial freight method. Traceable freight means that the shipment is registered upon shipment with an identifying number. The number is for location of the shipment at any point in transit, including final destination, and verifies shipment arrival at the specified destination. If a shipping method does not provide traceability as defined above, it shall not be used.

INSPECTION AND ACCEPTANCE (DESTINATION)

Inspection and acceptance of the supplies or services to be furnished hereunder shall be made at destination by the receiving activity.

PROOF OF DELIVERY

If United Parcel Service (UPS) or Federal Express services are used for transportation, each package must have a unique package identification number. The Government will not consider the manifest as proof of delivery unless each package can be uniquely identified. Acceptance will occur only after the Government can verify actual receipt of the contract items--packaged, marked and labeled as required elsewhere in this contract.

Section E - Inspection and Acceptance

Overall Contract Inspection/Acceptance Locations

Inspection and Acceptance Location

Both Destination Instructions: Acceptance and Inspection will be conducted in accordance with contract terms and conditions.

DoDAAC: N45598 CountryCode: JPN

USN SRF-JRMC SASEBO JAPAN

USN SRF-JRMC SASEBO JAPAN, PHONE 011-81-956-50-3232

TATGAMI CHO SASEBO 857-0063

JAPAN

Government Representative, Government Receiving Email: Information Provided at Time of Award Telephone: Information Provided at Time of Award

Section F - Deliveries or Performance

Overall Contract Delivery Period

Government Origin (Shipping Point)

Line Item Delivery Schedule Quantity Address and POC Special Handling/Notes

Delivery On Or Before Delivery Date 15 Jul

2 Each Ship To DoDAAC: N45598 CountryCode: JPN

USN SRF-JRMC SASEBO JAPAN

USN SRF-JRMC SASEBO JAPAN, PHONE 011-81-

956-50-3232

TATGAMI CHO SASEBO 857-0063

JAPAN

Government Representative, Government Receiving Email: Information Provided at Time of Award Telephone: Information Provided at Time of Award

FoB Details Contractor Origin (Shipping Point)

Additional Regulation or Supplemental Clauses Incorporated by Full Text

FLCPS SRF 006 FLCPS_SRF_SHIPPING (Aug 2025)

FOB ORIGIN

I. INTRODUCTION

For this FOB Origin procurement, the Government will arrange for transportation and pay all associated transportation costs through the NAVSUP WSS Shipment Processing (SP) office (aka NAVSUP GLS, NAVSUP LOC or NOLSC). NAVSUP WSS will process shipments of materials from within the United States to CONUS (Continental United States)/OCONUS (Outside Continental United States) consignees with delivery terms Free On-Board (FOB) Origin.

Contractors/vendors shall complete the Naval Supply Systems Command automated Ready-to-Ship (RTS) web form by accessing the link provided below in Section II. By completing the form on line, the NAVSUP WSS at Norfolk, VA will receive an email of the shipment request immediately and will act on it as soon as possible during their normal working hours of 7:30 AM to 6:00 PM Eastern Time Monday through Friday. In response, NAVSUP WSS will provide MANDATORY USE shipping labels to the contractor/vendor. The contractor/vendor will arrange for shipment with the NAVSUP WSS designated carrier IMMEDIATELY upon receipt of the shipping labels. If the NAVSUP WSS provided shipping labels are not used, the contractor/vendor will experience delays and additional work to reconcile the transportation payment under the NAVSUP WSS tracking number and possible additional costs not covered under the contract or NAVSUP WSS Transportation. If the contractor/vendor turns an ordered vehicle away and a vehicle furnished not used charge is incurred the contractor/vendor is responsible for payment. If the contractor/vendor detains the vehicle and incurs a detention charge the contractor/vendor is responsible for payment. International small parcel shipment documents are invalid after five business days. If the vendor incurs any extra costs with the carrier outside of the CBL/GBL it is the vendors responsibility for payment. NAVSUP WSS does not accept hazardous or explosive shipments.

CONTRACTORS/VENDORS ARE NOT AUTHORIZED TO ARRANGE FOR TRANSPORTATION OR PAY TRANSPORTATION COSTS FOR

SHIPMENT OF FOB ORIGIN PROCUREMENT.

II. PROCEDURES FOR CONTRACTORS TO REQUEST READY-TO-SHIP (RTS) NOTICES

When the cargo is ready for shipment, the contractor/vendor will submit their shipping request to NAVSUP WSS using the following procedures:

Click on the link at https://mynavsup-public.nag.navy.mil/public/ops$mailer.ready_to_ship_form to open the NAVSUP WSS RTS Web Form. The contractor/vendor is required to fill in all data fields marked with a red asterisk under the headings "Vendor Information" and "Package Information."

The fields not marked with a red asterisk and the heading "Additional Notes" are optional fields to be filled in at the contractor's/vendor's discretion.

Click on the blue question mark at the right of each data field to access "On-line Data Element Help" which explains the data required in that field. If shipping labels are being requested for multiple packages, enter the data for the first package under "Package Information" then click the "Store Pkg Info" button. Repeat this procedure for each package. When all data has been entered on the electronic form, click the "Submit" button.

Container Shipments: containers take longer to book and arrange for loading. If you can provide reliable dimensions and weight estimates for the cargo, send the initial shipping request THREE WEEKS before your requested container load date.

If you have any questions regarding the web form, contact NAVSUP WSS Transportation directly at (757) 443-5449 or usn.norfolk.navsupwssnorf.

mbx.navsup-nfmgt1@us.navy.mil NOTE: Incomplete or missing information will significantly delay the process of arranging transportation.

III. CONTRACTING OFFICER SHALL PROVIDE THE FOLLOWING INFORMATION:

*Information provided at time of Award.

Contract Number: ____________________________________ Transportation Control Number (TCN): __________________ Transportation Priority (TP): ___________________________ Required Delivery Date (RDD): _________________________ Transportation Account Code (TAC): ____________________ Destination DODAAC: ________________________________

IV. NAVSUP WSS CONTACT INFORMATION

NOTE: The preferred method of contact is through email. Phone numbers are provided only for emergencies.

For Assistance Email (preferred): navsup_nfmgt.fct@navy.mil Fax: (757) 443-5517 Phone: (757) 443-5449 Business Hours: M-F 7:00 AM to 3:30 PM ET.

Section G - Contract Administration Data

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. Dec 2018

DFARS Clauses Incorporated by Full Text

252.232-7006 Wide Area WorkFlow Payment Instructions. (Jan 2023)

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

(a) As used in this clause- Definitions.

"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.

"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.

"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as Electronic invoicing.

authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) To access WAWF, the Contractor shall- WAWF access.

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice WAWF training.

Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/

(e) Document submissions may be via web entry, Electronic Data Interchange, or File Transfer WAWF methods of document submission.

Protocol.

(f) The Contractor shall use the following information when submitting payment requests and receiving reports WAWF payment instructions.

in WAWF for this contract or task or delivery order:

(1) The Contractor shall submit payment requests using the following document type(s): Document type.

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items-

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

(Contracting Officer: Insert either "Invoice 2in1" or the applicable invoice and receiving report document type(s) for fixed price line items for services.)

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial financing, submit a commercial financing request.

(2) ) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF "combo" document type to create some combinations of invoice and receiving report in one step.]

(3) The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in Document routing.

WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC ____

Issue By DoDAAC ____

Admin DoDAAC

Inspect By DoDAAC

Ship To Code

Ship From Code

Mark For Code

Service Approver (DoDAAC)

Service Acceptor (DoDAAC)

Accept at Other DoDAAC

LPO DoDAAC

DCAA Auditor DoDAAC

Other DoDAAC(s)

(*Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert "See Schedule" or "Not applicable.")

(**Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)

(4) The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in Payment request.

accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F. Receiving report.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

(Contracting Officer: Insert applicable information or "Not applicable.")

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of clause)

Section H - Special Contract Requirements

Section I - Contract Clauses

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.203-3 Gratuities. Apr 1984 52.203-6 Restrictions on Subcontractor Sales to the Government. Jun 2020 52.203-6 Restrictions on Subcontractor Sales to the Government. (Alternate I) Jun 2020 Alternate I Nov 2021 52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements. Jan 2017

52.209-6 Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded. (Deviation 2026-O0038)

Feb 2026

52.209-10 Prohibition on Contracting With Inverted Domestic Corporations. (Deviation 2026- O0038)

Feb 2026

52.212-4 Terms and Conditions-Commercial Products and Commercial Services. (Deviation 2026- O0038)

Feb 2026

52.219-6 Notice of Total Small Business Set-Aside. (Deviation 2026-O0038) Feb 2026 52.219-33 Nonmanufacturer Rule. (Deviation 2026-O0038) Feb 2026 52.222-19 Child Labor-Cooperation with Authorities and Remedies. (Deviation 2026-O0038) Mar 2026 52.222-35 Equal Opportunity for Veterans. (Deviation 2026-O0038) Feb 2026 52.222-36 Equal Opportunity for Workers with Disabilities. (Deviation 2026-O0038) Feb 2026 52.222-50 Combating Trafficking in Persons. (Deviation 2026-O0038) Feb 2026 52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving. May 2024 52.232-33 Payment by Electronic Funds Transfer-System for Award Management. Oct 2018 52.232-40 Providing Accelerated Payments to Small Business Subcontractors. Mar 2023 52.232-90 Fast Payment Procedure. (Deviation 2026-O0038) Feb 2026 52.233-3 Protest after Award. (Deviation 2026-O0038) Feb 2026 52.233-4 Applicable Law for Breach of Contract Claim. (Deviation 2026-O0038) Feb 2026 52.240-91 Security Prohibitions and Exclusions. (Deviation 2026-O0038) Feb 2026 52.240-92 Security Requirements. (Deviation 2026-O0038) Feb 2026 52.240-93 Basic Safeguarding of Covered Contractor Information Systems. (Deviation 2026-O0038) Feb 2026

52.244-6 Subcontracts for Commercial Products and Commercial Services. (Deviation 2026- O0038)

Apr 2026

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

252.203-7000 Requirements Relating to Compensation of Former DoD Officials. Sep 2011 252.203-7002 Requirement to Inform Employees of Whistleblower Rights. Dec 2022

252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting.

(DEVIATION 2024-O0013 REVISION 1)

May 2024 Deviation 2024-O0013 May 2024

252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support. Jan 2023

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.

Jan 2023

252.211-7008 Use of Government-Assigned Serial Numbers. Sep 2010 252.223-7008 Prohibition of Hexavalent Chromium. Jan 2023 252.225-7008 Restriction on Acquisition of Specialty Metals. Mar 2013 252.225-7012 Preference for Certain Domestic Commodities. Apr 2022 252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime. Jan 2023

252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region.

Jun 2023

252.225-7961 Restriction on the Acquisition of Certain Magnets, Tantalum, and Tungsten.

(DEVIATION 2026-O0041)

Jun 2026 Deviation 2026-O0041 Jun 2026

252.225-7967 Prohibition Regarding Russian Fossil Fuel Business Operations (Deviation 2024-O0006)

Oct 2026 Deviation 2024-O0006 Oct 2026

252.232-7010 Levies on Contract Payments. Dec 2006

252.240-7997 NIST SP 800-171 DoD Assessment Requirements. (DEVIATION 2026- O0025)

Feb 2026 Deviation 2026-O0025 Feb 2026

252.244-7999 Subcontracts for Commercial Products or Commercial Services.

(DEVIATION 2026-O0015)

Feb 2026 Deviation 2026-O0015 Jan 2026

252.246-7003 Notification of Potential Safety Issues. Jan 2023 252.247-7023 Transportation of Supplies by Sea. Oct 2024

DFARS Clauses Incorporated by Full Text

252.211-7003 Item Unique Identification and Valuation. (Jan 2023)

ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)

(a) . As used in this clause- Definitions

"Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

"Concatenated unique item identifier" means-

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.

"Data matrix" means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022.

"Data qualifier" means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

"DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at . https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html

"DoD item unique identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

" Enterprise " means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

" Enterprise identifier" means a code that is uniquely assigned to an enterprise by an issuing agency.

"Government's unit acquisition cost" means-

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery.

"Issuing agency" means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

"Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier.

"Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

" Lot or batch number" means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

"Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

"Original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

"Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

"Serial number within the enterprise identifier" means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

"Serial number within the part, lot, or batch number" means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

"Serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

"Serialization within the part, lot, or batch number" means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

"Type designation" means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

"Unique item identifier" means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

"Unique item identifier type" means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at .https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

(ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

(If items are identified in the Schedule, insert "See Schedule in this table.)

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number .

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number .____

(v) Any item not included in (i), (ii), (iii), or (iv) for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology - International symbology specification - Data matrix; ECC200 data matrix specification.

(4) The Contractor shall ensure that- Data syntax and semantics of unique item identifiers.

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH

10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH

10.8.2 Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology - Transfer Syntax for High Capacity Automatic Data Capture Media.

(5) . Unique item identifier

(i) The Contractor shall-

(A) Determine whether to-

Serialize within the enterprise identifier; (1)

Serialize within the part, lot, or batch number; or (2)

Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and (3)

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.S. Military Property, latest version;

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.

(ii) The issuing agency code-

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) Enterprise identifier (if concatenated unique item identifier is used).

(5) Original part number (if there is serialization within the original part number).

(6) Lot or batch number (if there is serialization within the lot or batch number).

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(10) Government's unit acquisition cost.

(11) Unit of measure.

(12) Type designation of the item as specified in the contract schedule, if any.

(13) Whether the item is an item of Special Tooling or Special Test Equipment.

(14) Whether the item is covered by a warranty.

(e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1)(iii) of this clause or when item unique identification is provided under paragraph (c)(1)(v), the Contractor shall report as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.**

(4) Issuing agency code (if concatenated unique item identifier is used).**

(5) Enterprise identifier (if concatenated unique item identifier is used).**

(6) Original part number (if there is serialization within the original part number).**

(7) Lot or batch number (if there is serialization within the lot or batch number).**

(8) Current part number (optional and only if not the same as the original part number).**

(9) Current part number effective date (optional and only if current part number is used).**

(10) Serial number (if concatenated unique item identifier is used).**

(11) Description.

** Once per item.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/.

(2) Embedded items shall be reported by one of the following methods-

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site /uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number (fill in) , Unique Item Identifier Report for Embedded Items, Contract Data Requirements List, DD Form 1423.

(g) . If the Contractor acquires by subcontract, any item(s) for which item unique identification is required in accordance with Subcontracts paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial products or commercial services.

(End of clause)

Additional Regulation or Supplemental Clauses Incorporated by Full Text

FLCPS_C200 Class Deviation 2026-O0051 - Implementation of Vendor Threat Mitigation (11Jun2026)

(Jun 2026)

252.225-7962 Threat Mitigation Support to Operations. (DEVIATION 2026-O0051)

VENDOR THREAT MITIGATION SUPPORT TO OPERATIONS (JUN 2026) (DEVIATION 2026-O0051)

(a) . As used in this clause--Definitions

"Covered activities" means activities in which a covered person or entity is--

(1) Engaging in acts of violence against personnel of the United States or its partners and allies;

(2) Providing financing, logistics, training, or intelligence to a person or entity engaging in acts of violence against personnel of the United States or its partners and allies;

(3) Engaging in foreign intelligence activities against the United States or its partners and allies;

(4) Engaging in transnational organized crime or criminal activities; or

(5) Engaging in other activities that present a direct or indirect risk to United States or partner and allied missions and forces.

"Covered contract" means a contract that is performed outside the United States, including its outlying areas.

"Covered person or entity" means any person, corporation, company, limited liability company, limited partnership, business trust, business association, or other similar entity outside of the United States or any foreign reporting company in accordance with 31 U.S.C. 5336(a)(11)(A)(ii) that is responding to a covered solicitation or performing work on a covered contract.

"Covered procurement action" means an action taken by a head of contracting activity to--

(1) Exclude a person or commercial entity from an award with or without an existing contract;

(2) Terminate a contract for default or cause; or

(3) Void, in whole or in part, a contract.

(b) . This clause implements section 841 of the National Defense Authorization Act (NDAA) for Fiscal Year (FY) 2015 (Pub. L. 113-291) Authority and section 823 of the NDAA for FY 2024 (Pub. L. 118-31). Sections 841 and 823 provide the Government the authority to mitigate and prevent covered activities by taking covered procurement actions.

(c) .Compliance

(1) The Contractor and its personnel must be familiar with and comply with--

(i) Vendor Threat Mitigation (VTM) policies, including but not limited to the Department of Defense Directive 3000.16, Vendor Threat Mitigation;

and

(ii) The VTM program established by the respective combatant command, including the orders, directives, and instructions issued by the Combatant Commander relating to VTM support to operations.

(2) The Contractor and its personnel must not engage in covered activities.

(3) The Contractor must exercise due diligence to mitigate covered activities from occurring under this contract and all subcontracts. Due diligence includes but is not limited to--

(i) Checking the list of prohibited or restricted sources in the System for Award Management (SAM) at prior to subcontract award and www.sam.gov at least monthly thereafter to ensure subcontractor eligibility;

(ii) Terminating or voiding, in whole or in part, any subcontract with a person or entity listed in SAM as a prohibited or restricted source pursuant to section 841 of the NDAA for FY 2015 and section 823 of the NDAA for FY 2024, unless the Contracting Officer provides to the Contractor written approval to continue the subcontract; and

(iii) Leveraging all available resources and tools to mitigate engagement in covered activities.

(4) The Contractor must notify the Contracting Officer immediately upon a finding of covered activities taking place under this contract.

(d) . The Contractor must include the substance of this clause, including this paragraph (d), in subcontracts, including subcontracts for Subcontracts commercial products and commercial services, that will be performed outside the United States and its outlying areas.

(End of clause)

252.225-7975 Additional Access to Contractor and Subcontractor Records. (DEVIATION 2026-O0051)

ADDITIONAL ACCESS TO CONTRACTOR AND SUBCONTRACTOR RECORDS (JUN 2026) (DEVIATION 2026-O0051)

(a) . As authorized by sections 841 and 842 of the National Defense Authorization Act (NDAA) for Fiscal Year (FY) 2015 and section 823 Authority of the NDAA for FY 2024, and in addition to any other existing examination-of-records authority, the Government is authorized to examine any records of the Contractor and its subcontractors to the extent necessary to support the Vendor Threat Mitigation Programs established by combatant commanders.

(b) The Contractor must include the substance of this clause, including this paragraph (b), in subcontracts, including subcontracts for Subcontracts.

commercial products and commercial services, that will be performed outside the United States and its outlying areas.

(End of clause)

SUPTXT 203.1106-1 NAVY USE OF ABILITY ONE (Jan 2025)

SUPTXT 203.1106-1 (3-18) NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR

INFORMATION

NAVSUP Fleet Logistics Center Puget Sound may utilize contractor support through the AbilityOne Program, as needed, to perform contract closeout functions for this acquisition. Information, including business sensitive/confidential or proprietary data, that the offeror provides to the government or information already in the possession of the government may be viewed and utilized by the AbilityOne Program support contractor personnel during the course of its contract performance. The information that may be made available to the support contractor may include, for example, pricing and technical proposals, historical contract, pricing and performance information, Commercial Asset Visibility (CAV) reporting information and similar data/information.

By submission of a proposal in response to this solicitation, the offeror and its subcontractors consent to a release of their business sensitive /confidential or proprietary data to the government's AbilityOne Program support contractor personnel. AbilityOne will have a Non-Disclosure/Non- Use Agreement in place with the Government in order to comply with DFARS 252-227-7025. The offeror retains the right to engage AbilityOne in a non-disclosure agreement pursuant to DFARS 252.227-7025(b)(5)(iv)

Section J - List of Attachments

Section K - Representations, Certification, & Other Statements

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.203-11 Certification and Disclosure Regarding Payments to Influence Certain Federal Transactions.

Sep 2024

52.240-90 Security Prohibitions and Exclusions Representations and Certifications. (Deviation 2026- O0038)

Feb 2026

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

252.203-7005 Representation Relating to Compensation of Former DoD Officials. Sep 2022 252.204-7008 Compliance with Safeguarding Covered Defense Information Controls. Oct 2016 252.225-7055 Representation Regarding Business Operations with the Maduro Regime. May 2022

252.225-7966 Prohibition Regarding Russian Fossil Fuel Business Operations- Representation (Deviation 2024-O0006)

Oct 2026 Deviation 2024-O0006 Oct 2026

Section L - Instructions, Conditions, & Notices to Offerors or Quoters

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.203-18 Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements-Representation.

Jan 2017

52.204-7 System for Award Management-Registration. (Deviation 2026-O0038) Feb 2026

52.212-1 Instructions to Offerors-Commercial Products and Commercial Services. (Deviation 2026- O0038)

Feb 2026

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

252.204-7024 Notice on the Use of the Supplier Performance Risk System. Mar 2023

Section M - Evaluation Factors for Award