3.04_Solicitation_Amendment_0003_N0038326RA051.pdf

R

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended. is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NUMBER IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print) 16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

15C. DATE SIGNED 16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

16C. DATE SIGNED

Previous edition unusable STANDARD FORM 30 (REV. 11/2016) Prescribed by GSA FAR (48 CFR) 53.243

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE PAGE OF PAGES

2. AMENDMENT/MODIFICATION NUMBER 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQUISITION NUMBER 5. PROJECT NUMBER (If applicable)

6. ISSUED BY CODE 7. ADMINISTERED BY (If other than Item 6) CODE

8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X) 9A. AMENDMENT OF SOLICITATION NUMBER

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NUMBE

10B. DATED (SEE ITEM 13)

CODE FACILITY CODE

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

Section A - Solicitation/Contract Form

The following changes have been made:

INFORMATION FROM TO

Response Due Date 01 Apr 2026 15 Jul 2026

N0038326RA0510003

Section E - Inspection and Acceptance

The following clauses were modified:

52.246-11 Higher-Level Contract Quality Requirement. Dec 2014 hereby reads as follows:

HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT (DEC 2014)

(a) The Contractor shall comply with the higher-level quality standard(s) listed below.

____[Contracting Officer insert the title, number (if any), date, and tailoring (if any) of the higher-level quality standards.]

(b) The Contractor shall include applicable requirements of the higher-level quality standard(s) listed in paragraph (a) of this clause and the requirement to flow down such standards, as applicable, to lower-tier subcontracts, in-

(1) Any subcontract for critical and complex items (see 46.203(b) and (c)); or

(2) When the technical requirements of a subcontract require-

(i) Control of such things as design, work operations, in-process control, testing, and inspection; or

(ii) Attention to such factors as organization, planning, work instructions, documentation control, and advanced metrology.

(End of clause)

Section F - Deliveries or Performance

The following clauses were deleted:

FAR Clauses Incorporated by Reference

Number Title Effective Date Alternate/ Deviation

Variation Effective Date

52.211-17 Delivery of Excess Quantities. Sep 1989 52.242-15 Stop-Work Order. Aug 1989 52.247-55 F.o.b. Point for Delivery of Government-Furnished Property. Jun 2003 52.247-59 F.o.b. Origin-Carload and Truckload Shipments. Apr 1984 52.247-61 F.o.b. Origin-Minimum Size of Shipments. Apr 1984 52.247-65 F.o.b. Origin, Prepaid Freight-Small Package Shipments. Jan 1991

Section G - Contract Administration Data

Additional Information/Notes

The following clauses were modified:

252.232-7006 Wide Area WorkFlow Payment Instructions. Jan 2023 hereby reads as follows:

As prescribed in 232.7004(b), use the following clause:

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

(a) As used in this clause- Definitions.

"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.

"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.

"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as Electronic invoicing.

authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) To access WAWF, the Contractor shall- WAWF access.

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice WAWF training.

Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/

(e) Document submissions may be via web entry, Electronic Data Interchange, or File Transfer WAWF methods of document submission.

Protocol.

(f) The Contractor shall use the following information when submitting payment requests and receiving reports WAWF payment instructions.

in WAWF for this contract or task or delivery order:

(1) The Contractor shall submit payment requests using the following document type(s): Document type.

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items-

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

(Contracting Officer: Insert either "Invoice 2in1" or the applicable invoice and receiving report document type(s) for fixed price line items for services.)

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial financing, submit a commercial financing request.

(2) ) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF "combo" document type to create some combinations of invoice and receiving report in one step.]

(3) The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in Document routing.

WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC ____

Issue By DoDAAC ____

Admin DoDAAC ____

Inspect By DoDAAC ____

Ship To Code ____

Ship From Code ____

Mark For Code ____

Service Approver (DoDAAC) ____

Service Acceptor (DoDAAC) ____

Accept at Other DoDAAC ____

LPO DoDAAC ____

DCAA Auditor DoDAAC ____

Other DoDAAC(s) ____

(*Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert "See Schedule" or "Not applicable.")

(**Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)

(4) The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in Payment request.

accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F. Receiving report.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

(Contracting Officer: Insert applicable information or "Not applicable.")

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of clause)

Section I - Contract Clauses

Additional Information/Notes

The following clauses were added:

FAR Clauses Incorporated by Reference

Number Title Effective Date Alternate/ Deviation

Variation Effective Date

52.219-9 Small Business Subcontracting Plan. (Deviation 2026-O0038) (Alternate IV) Feb 2026 Alternate IV Feb 2026

52.222-20 Contracts for Materials, Supplies, Articles, and Equipment. (Deviation 2026- O0038)

Feb 2026

52.222-90 Addressing DEI Discrimination by Federal Contractors. (Deviation 2026-O0040, Revision 1)

Apr 2026

52.232-16 Progress Payments. (Alternate III) Feb 2026 Alternate III Jun 2020 52.240-91 Security Prohibitions and Exclusions. (Deviation 2026-O0038) Feb 2026

52.240-93 Basic Safeguarding of Covered Contractor Information Systems. (Deviation 2026- O0038)

Feb 2026

FAR Clauses Incorporated by Full Text

52.232-16 Progress Payments. (Deviation 2026-O0038) (Feb 2026)

PROGRESS PAYMENTS (FEB 2026) (DEVIATION 2026-O0038)

The Government will make progress payments to the Contractor when requested as work progresses, but not more frequently than monthly, in amounts of $2,500 or more approved by the Contracting Officer, under the following conditions:

Computation of amounts.(a)

Unless the Contractor requests a smaller amount, the Government will compute each progress payment as 80 percent of the Contractor's total (1) costs incurred under this contract whether or not actually paid, plus financing payments to subcontractors (see paragraph (j) of this clause), less the sum of all previous progress payments made by the Government under this contract. The Contracting Officer will consider cost of money that would be allowable under Federal Acquisition Regulation (FAR) 31.205-10 as an incurred cost for progress payment purposes.

(2) The amount of financing and other payments for supplies and services purchased directly for the contract are limited to the amounts that have been paid by cash, check, or other forms of payment, or that are determined due and will be paid to subcontractors-

(i) In accordance with the terms and conditions of a subcontract or invoice; and

(ii) Ordinarily within 30 days of the submission of the Contractor's payment request to the Government.

(3) The Government will exclude accrued costs of Contractor contributions under employee pension plans until actually paid unless-

(i) The Contractor's practice is to make contributions to the retirement fund quarterly or more frequently; and

(ii) The contribution does not remain unpaid 30 days after the end of the applicable quarter or shorter payment period (any contribution remaining unpaid shall be excluded from the Contractor's total costs for progress payments until paid).

(4) The Contractor shall not include the following in total costs for progress payment purposes in paragraph (a)(1) of this clause:

(i) Costs that are not reasonable, allocable to this contract, and consistent with sound and generally accepted accounting principles and practices.

(ii) Costs incurred by subcontractors or suppliers.

(iii) Costs ordinarily capitalized and subject to depreciation or amortization except for the properly depreciated or amortized portion of such costs.

(iv) Payments made or amounts payable to subcontractors or suppliers, except for-

(A) Completed work, including partial deliveries, to which the Contractor has acquired title; and

(B) Work under cost-reimbursement or time-and-material subcontracts to which the Contractor has acquired title.

(5) The amount of unliquidated progress payments may exceed neither (i) the progress payments made against incomplete work (including allowable unliquidated progress payments to subcontractors) nor (ii) the value, for progress payment purposes, of the incomplete work. Incomplete work shall be considered to be the supplies and services required by this contract, for which delivery and invoicing by the Contractor and acceptance by the Government are incomplete.

(6) The total amount of progress payments shall not exceed 80 percent of the total contract price.

(7) If a progress payment or the unliquidated progress payments exceed the amounts permitted by subparagraphs (a)(4) or (a)(5) of this clause, the Contractor shall repay the amount of such excess to the Government on demand.

(8) Notwithstanding any other terms of the contract, the Contractor agrees not to request progress payments in dollar amounts of less than $2,500.

The Contracting Officer may make exceptions.

(9) The costs applicable to items delivered, invoiced, and accepted shall not include costs in excess of the contract price of the items.

(b) Except as provided in the Termination for Convenience of the Government clause, all progress payments shall be liquidated by Liquidation.

deducting from any payment under this contract, other than advance or progress payments, the unliquidated progress payments, or 80 percent of the amount invoiced, whichever is less. The Contractor shall repay to the Government any amounts required by a retroactive price reduction, after computing liquidations and payments on past invoices at the reduced prices and adjusting the unliquidated progress payments accordingly. The Government reserves the right to unilaterally change from the ordinary liquidation rate to an alternate rate when deemed appropriate for proper contract financing.

(c) The Contracting Officer may reduce or suspend progress payments, increase the rate of liquidation, or take a Reduction or suspension.

combination of these actions, after finding on substantial evidence any of the following conditions:

(1) The Contractor failed to comply with any material requirement of this contract (which includes paragraphs (f) and (g) of this clause).

(2) Performance of this contract is endangered by the Contractor's (i) failure to make progress or (ii) unsatisfactory financial condition.

(3) Inventory allocated to this contract substantially exceeds reasonable requirements.

(4) The Contractor is delinquent in payment of the costs of performing this contract in the ordinary course of business.

(5) The fair value of the undelivered work is less than the amount of unliquidated progress payments for that work.

(6) The Contractor is realizing less profit than that reflected in the establishment of any alternate liquidation rate in paragraph (b) of this clause, and that rate is less than the progress payment rate stated in subparagraph (a)(1) of this clause.

(d) Title.

(1) Title to the property described in this paragraph (d) shall vest in the Government. Vestiture shall be immediately upon the date of this contract, for property acquired or produced before that date. Otherwise, vestiture shall occur when the property is or should have been allocable or properly chargeable to this contract.

(2) as used in this clause, includes all of the below-described items acquired or produced by the Contractor that are or should be Property, allocable or properly chargeable to this contract under sound and generally accepted accounting principles and practices.

(i) Parts, materials, inventories, and work in process;

(ii) Special tooling and special test equipment to which the Government is to acquire title;

(iii) Nondurable (i.e., noncapital) tools, jigs, dies, fixtures, molds, patterns, taps, gauges, test equipment, and other similar manufacturing aids, title to which would not be obtained as special tooling under paragraph (d)(2)(ii) of this clause; and

(iv) Drawings and technical data, to the extent the Contractor or subcontractors are required to deliver them to the Government by other clauses of this contract.

(3) Although title to property is in the Government under this clause, other applicable clauses of this contract, e.g., the termination clauses, shall determine the handling and disposition of the property.

(4) The Contractor may sell any scrap resulting from production under this contract without requesting the Contracting Officer's approval, but the proceeds shall be credited against the costs of performance.

(5) To acquire for its own use or dispose of property to which title is vested in the Government under this clause, the Contractor must obtain the Contracting Officer's advance approval of the action and the terms. The Contractor shall (i) exclude the allocable costs of the property from the costs of contract performance, and (ii) repay to the Government any amount of unliquidated progress payments allocable to the property. Repayment may be by cash or credit memorandum.

(6) When the Contractor completes all of the obligations under this contract, including liquidation of all progress payments, title shall vest in the Contractor for all property (or the proceeds thereof) not-

(i) Delivered to, and accepted by, the Government under this contract; or

(ii) Incorporated in supplies delivered to, and accepted by, the Government under this contract and to which title is vested in the Government under this clause.

(7) The terms of this contract concerning liability for Government-furnished property shall not apply to property to which the Government acquired title solely under this clause.

(e) Before delivery to and acceptance by the Government, the Contractor shall bear the risk of loss for property, the title to which Risk of loss.

vests in the Government under this clause, except to the extent the Government expressly assumes the risk. The Contractor shall repay the Government an amount equal to the unliquidated progress payments that are based on costs allocable to property that is lost (see 45.101).

(f) The Contractor shall maintain an accounting system and controls adequate for the proper administration of this Control of costs and property.

clause.

(g) Reports, forms, and access to records.

(1) The Contractor shall promptly furnish reports, certificates, financial statements, and other pertinent information (including estimates to complete) reasonably requested by the Contracting Officer for the administration of this clause. Also, the Contractor shall give the Government reasonable opportunity to examine and verify the Contractor's books, records, and accounts.

(2) The Contractor shall furnish estimates to complete that have been developed or updated within six months of the date of the progress payment request. The estimates to complete shall represent the Contractor's best estimate of total costs to complete all remaining contract work required under the contract. The estimates shall include sufficient detail to permit Government verification.

(3) Each Contractor request for progress payment shall:

(i) Be submitted on Standard Form 1443, Contractor's Request for Progress Payment, or the electronic equivalent as required by agency regulations, in accordance with the form instructions and the contract terms; and

(ii) Include any additional supporting documentation requested by the Contracting Officer.

(h) If this contract is terminated under the Default clause, (i) the Contractor shall, on demand, repay to the Special terms regarding default.

Government the amount of unliquidated progress payments and (ii) title shall vest in the Contractor, on full liquidation of progress payments, for all property for which the Government elects not to require delivery under the Default clause. The Government shall be liable for no payment except as provided by the Default clause.

(i) Reservations of rights.

(1) No payment or vesting of title under this clause shall (i) excuse the Contractor from performance of obligations under this contract or (ii) constitute a waiver of any of the rights or remedies of the parties under the contract.

(2) The Government's rights and remedies under this clause (i) shall not be exclusive but rather shall be in addition to any other rights and remedies provided by law or this contract and (ii) shall not be affected by delayed, partial, or omitted exercise of any right, remedy, power, or privilege, nor shall such exercise or any single exercise preclude or impair any further exercise under this clause or the exercise of any other right, power, or privilege of the Government.

(j) The financing payments to subcontractors mentioned in paragraphs (a)(1) and (a)(2) of this clause shall Financing payments to subcontractors.

be all financing payments to subcontractors or divisions, if the following conditions are met:

(1) The amounts included are limited to-

(i) The unliquidated remainder of financing payments made; plus

(ii) Any unpaid subcontractor requests for financing payments.

(2) The subcontract or interdivisional order is expected to involve a minimum of approximately 6 months between the beginning of work and the first delivery; or, if the subcontractor is a small business concern, 4 months.

(3) If the financing payments are in the form of progress payments, the terms of the subcontract or interdivisional order concerning progress payments-

(i) Are substantially similar to the terms of this clause for any subcontractor that is a large business concern, or this clause with its for Alternate I any subcontractor that is a small business concern;

(ii) Are at least as favorable to the Government as the terms of this clause;

(iii) Are not more favorable to the subcontractor or division than the terms of this clause are to the Contractor;

(iv) Are in conformance with the requirements of FAR 32.504(e); and

(v) Subordinate all subcontractor rights concerning property to which the Government has title under the subcontract to the Government's right to require delivery of the property to the Government if-

(A) The Contractor defaults; or

(B) The subcontractor becomes bankrupt or insolvent.

(4) If the financing payments are in the form of performance-based payments, the terms of the subcontract or interdivisional order concerning payments-

(i) Are substantially similar to the Performance-Based Payments clause at FAR 52.232-32 and meet the criteria for, and definition of, performance-based payments in FAR Part 32;

(ii) Are in conformance with the requirements of FAR 32.504(f); and

(iii) Subordinate all subcontractor rights concerning property to which the Government has title under the subcontract to the Government's right to require delivery of the property to the Government if-

(A) The Contractor defaults; or

(B) The subcontractor becomes bankrupt or insolvent.

(5) If the financing payments are in the form of commercial product or commercial service financing payments, the terms of the subcontract or interdivisional order concerning payments-

(i) Are constructed in accordance with FAR 32.206(c) and included in a subcontract for a commercial product or commercial service purchase that meets the definition and standards for acquisition of commercial products and commercial services in FAR parts 2 and 12;

(ii) Are in conformance with the requirements of FAR 32.504(g); and

(iii) Subordinate all subcontractor rights concerning property to which the Government has title under the subcontract to the Government's right to require delivery of the property to the Government if-

(A) The Contractor defaults; or

(B) The subcontractor becomes bankrupt or insolvent.

(6) If financing is in the form of progress payments, the progress payment rate in the subcontract is the customary rate used by the contracting agency, depending on whether the subcontractor is or is not a small business concern.

(7) Concerning any proceeds received by the Government for property to which title has vested in the Government under the subcontract terms, the parties agree that the proceeds shall be applied to reducing any unliquidated financing payments by the Government to the Contractor under this contract.

(8) If no unliquidated financing payments to the Contractor remain, but there are unliquidated financing payments that the Contractor has made to any subcontractor, the Contractor shall be subrogated to all the rights the Government obtained through the terms required by this clause to be in any subcontract, as if all such rights had been assigned and transferred to the Contractor.

(9) To facilitate small business participation in subcontracting under this contract, the Contractor shall provide financing payments to small business concerns, in conformity with the standards for customary contract financing payments stated in FAR 32.113. The Contractor shall not consider the need for such financing payments as a handicap or adverse factor in the award of subcontracts.

(k) Notwithstanding any other progress payment provisions in this contract, progress payments may Limitations on undefinitized contract actions.

not exceed 80 percent of costs incurred on work accomplished under undefinitized contract actions. A is any action resulting in a contract action contract, as defined in subpart 2.1, including contract modifications for additional supplies or services, but not including contract modifications that are within the scope and under the terms of the contract, such as contract modifications issued pursuant to the Changes clause, or funding and other administrative changes. This limitation shall apply to the costs incurred, as computed in accordance with paragraph (a) of this clause, and shall remain in effect until the contract action is definitized. Costs incurred which are subject to this limitation shall be segregated on Contractor progress payment requests and invoices from those costs eligible for higher progress payment rates. For purposes of progress payment liquidation, as described in paragraph (b) of this clause, progress payments for undefinitized contract actions shall be liquidated at 80 percent of the amount invoiced for work performed under the undefinitized contract action as long as the contract action remains undefinitized. The amount of unliquidated progress payments for undefinitized contract actions shall not exceed 80 percent of the maximum liability of the Government under the undefinitized contract action or such lower limit specified elsewhere in the contract. Separate limits may be specified for separate actions.

(l) The designated payment office will make progress payments on the [Due date. ____ Contracting Officer insert date as prescribed by agency ] day after the designated billing office receives a proper progress payment request. In the event that the head; if not prescribed, insert "30th"

Government requires an audit or other review of a specific progress payment request to ensure compliance with the terms and conditions of the contract, the designated payment office is not compelled to make payment by the specified due date. Progress payments are considered contract financing and are not subject to the interest penalty provisions of the Prompt Payment Act.

(m) Progress payments under indefinite-delivery contracts. The Contractor shall account for and submit progress payment requests under individual orders as if the order constituted a separate contract, unless otherwise specified in this contract.

(End of clause)

DFARS Clauses Incorporated by Reference

Number Title Effective Date Alternate/ Deviation

Variation Effective Date

252.215-7995 Program Should-Cost Review. (DEVIATION 2026-O0048) Mar 2026 Deviation 2026-O0048 Mar 2026

252.219-7996 Small Business Subcontracting Plan (DoD Contracts). (DEVIATION 2026-O0037)

Feb 2026 Deviation 2026-O0037 Feb 2026

252.219-7996 Small Business Subcontracting Plan (DoD Contracts). ALTERNATE I

(DEVIATION 2026-O0037)

Feb 2026 Alternate I Deviation 2026-O0037

Feb 2026 Feb 2026

252.219-7997 Small Business Subcontracting Plan (Test Program). (DEVIATION 2026-O0037)

Feb 2026 Deviation 2026-O0037 Feb 2026

252.227-7991 Rights in Bid or Proposal Information. (DEVIATION 2026-O0036) Feb 2026 Deviation 2026-O0036 Feb 2026 252.227-7996 Technical Data--Withholding of Payment. (DEVIATION 2026-O0036) Feb 2026 Deviation 2026-O0036 Feb 2026 252.227-7997 Validation of Asserted Restrictions. (DEVIATION 2026-O0036) Feb 2026 Deviation 2026-O0036 Feb 2026

252.240-7997 NIST SP 800-171 DoD Assessment Requirements. (DEVIATION 2026- O0025)

Feb 2026 Deviation 2026-O0025 Feb 2026

252.242-7997 Material Management and Accounting System. (DEVIATION 2026- O0050)

Mar 2026 Deviation 2026-O0050 Mar 2026

252.242-7998 Contractor Business Systems. (DEVIATION 2026-O0050) Mar 2026 Deviation 2026-O0050 Mar 2026 252.242-7999 Accounting System Administration. (DEVIATION 2026-O0050) Mar 2026 Deviation 2026-O0050 Mar 2026

252.244-7999 Subcontracts for Commercial Products or Commercial Services.

(DEVIATION 2026-O0015)

Feb 2026 Deviation 2026-O0015 Jan 2026

252.246-7998 Warranty of Data. ALTERNATE I (DEVIATION 2026-O0035) Feb 2026 Alternate I Deviation 2026-O0035

Feb 2026 Feb 2026

252.246-7998 Warranty of Data. ALTERNATE II (DEVIATION 2026-O0035) Feb 2026 Alternate II Deviation 2026-O0035

Feb 2026 Feb 2026

252.246-7998 Warranty of Data. (DEVIATION 2026-O0035) Feb 2026 Deviation 2026-O0035 Feb 2026

DFARS Clauses Incorporated by Full Text

252.227-7989 Rights in Technical Data, Computer Software, and Computer Software Documentation--Other Than Commercial Products and Commercial Services. (DEVIATION 2026-O0036)

(Feb 2026) Deviation 2026-O0036 (Feb 2026)

RIGHTS IN TECHNICAL DATA, COMPUTER SOFTWARE, ANDCOMPUTER SOFTWARE DOCUMENTATION--OTHER THAN

COMMERCIAL PRODUCTS OR COMMERCIAL SERVICES(DEVIATION 2026-O0036) (FEB 2026)

(a) . As used in this clause--Definitions

"Commercial computer software" means software developed or regularly used for nongovernmental purposes which--

(1) Has been sold, leased, or licensed to the public;

(2) Has been offered for sale, lease, or license to the public;

(3) Has not been offered, sold, leased, or licensed to the public but will be available for commercial sale, lease, or license in time to satisfy the delivery requirements of this contract; or

(4) Satisfies a criterion expressed in paragraph (1), (2), or (3) of this definition and would require only minor modification to meet the requirements of this contract.

"Computer database" means a collection of data recorded in a form capable of being processed by a computer. The term does not include computer software.

"Computer program" means a set of instructions, rules, or routines recorded in a form that is capable of causing a computer to perform a specific operation or series of operations.

"Computer software" means computer programs, source code, source code listings, object code listings, design details, algorithms, processes, flow charts, formulae and related material that would enable the software to be reproduced, recreated, or recompiled. Computer software does not include computer databases or computer software documentation.

"Computer software documentation" means owner's manuals, user's manuals, installation instructions, operating instructions, and other similar items, regardless of storage medium, that explain the capabilities of the computer software or provide instructions for using the software.

"Covered Government support contractor" means a contractor (other than a litigation support contractor covered by 252.204-7014) under a contract, the primary purpose of which is to furnish independent and impartial advice or technical assistance directly to the Government in support of the Government's management and oversight of a program or effort, rather than to directly furnish an end item or service to accomplish a program or effort, provided that the contractor--

(1) Is not affiliated with the prime contractor or a first-tier subcontractor on the program or effort, or with any direct competitor of such prime contractor or any such first-tier subcontractor in furnishing end items or services of the type developed or produced on the program or effort; and

(2) Receives access to technical data or computer software for performance of a Government contract that contains the clause at 252.227- 7994, Limitations on the Use or Disclosure of Government-Furnished Information Marked with Restrictive Legends.

"Detailed manufacturing or process data" means technical data that describe the steps, sequences, and conditions of manufacturing, processing or assembly used by the manufacturer to produce an item or component or to perform a process.

"Developed" means--

(1) (Applicable to technical data other than computer software documentation.) An item, component, or process exists and is workable. Thus, the item or component must have been constructed or the process practiced. Workability is generally established when the item, component, or process has been analyzed or tested sufficiently to demonstrate to reasonable people skilled in the applicable art that there is a high probability that it will operate as intended. Whether, how much, and what type of analysis or testing is required to establish workability depends on the nature of the item, component, or process, and the state of the art. To be considered "developed," the item, component, or process need not be at the stage where it could be offered for sale or sold on the commercial market, nor must the item, component, or process be actually reduced to practice within the meaning of Title 35 of the United States Code;

(2) A computer program has been successfully operated in a computer and tested to the extent sufficient to demonstrate to reasonable persons skilled in the art that the program can reasonably be expected to perform its intended purpose;

(3) Computer software, other than computer programs, has been tested or analyzed to the extent sufficient to demonstrate to reasonable persons skilled in the art that the software can reasonably be expected to perform its intended purpose; or

(4) Computer software documentation the contractor must deliver under a contract has been written, in any medium, in sufficient detail to comply with requirements under that contract.

"Developed exclusively at private expense" means development was accomplished entirely with costs charged to indirect cost pools, costs not allocated to a Government contract, or any combination thereof.

(1) Private expense determinations should be made at the lowest practicable level.

(2) Under fixed-price contracts, when total costs are greater than the firm-fixed-price or ceiling price of the contract, the additional development costs necessary to complete development shall not be considered when determining whether development was at Government, private, or mixed expense.

"Developed exclusively with Government funds" means development was not accomplished exclusively or partially at private expense.

"Developed with mixed funding" means development was accomplished partially with costs charged to indirect cost pools and/or costs not allocated to a government contract, and partially with costs charged directly to a government contract.

"Form, fit, and function data" means technical data that describe the required overall physical, functional, and performance characteristics (along with the qualification requirements, if applicable) of an item, component, or process to the extent necessary to permit identification of physically and functionally interchangeable items.

"Generated" means, with regard to technical data or computer software, first created in the performance of this contract.

"Government purpose" means any activity in which the United States Government is a party, including cooperative agreements with international or multi-national defense organizations, or sales or transfers by the United States Government to foreign governments or international organizations.

Government purposes include competitive procurement, but do not include the rights to use, modify, reproduce, release, perform, display, or disclose technical data, computer software, or computer software documentation for commercial purposes or authorize others to do so.

"Government purpose rights" means the rights to--

(1) Use, modify, reproduce, release, perform, display, or disclose technical data, computer software, or computer software documentation within the Government without restriction; and

(2) Release or disclose technical data, computer software, or computer software documentation outside the Government and authorize persons to whom release or disclosure has been made to use, modify, reproduce, release, perform, display, or disclose that data or software for United States Government purposes.

"Limited rights" means the rights to use, modify, reproduce, release, perform, display, or disclose technical data, in whole or in part, within the Government. The Government may not, without the written permission of the party asserting limited rights, release or disclose the technical data outside the Government, use the technical data for manufacture, or authorize the technical data to be used by another party, except that the Government may reproduce, release, or disclose such data or authorize the use or reproduction of the data by persons outside the Government if--

(1) The reproduction, release, disclosure, or use is--

(i) Necessary for emergency repair and overhaul; or

(ii) A release or disclosure to--

(A) A covered Government support contractor in performance of its covered Government support contract for use, modification, reproduction, performance, display, or release or disclosure to a person authorized to receive limited rights technical data; or

(B) A foreign government, of technical data other than detailed manufacturing or process data, when use of such data by the foreign government is in the interest of the Government and is required for evaluational or informational purposes;

(2) The recipient of the technical data is subject to a prohibition on the further reproduction, release, disclosure, or use of the technical data;

and

(3) The contractor or subcontractor asserting the restriction is notified of such reproduction, release, disclosure, or use.

"Minor modification" means a modification that does not significantly alter the nongovernmental function or purpose of the software or is of the type customarily provided in the commercial marketplace.

"Other than commercial computer software" means software that does not qualify as commercial computer software under the definition of "commercial computer software" of this clause.

"Restricted rights" apply only to other than commercial computer software and mean the Government's rights to--

(1) Use a computer program with one computer at one time. The program may not be accessed by more than one terminal or central processing unit or time shared unless otherwise permitted by this contract;

(2) Transfer a computer program to another Government agency without the further permission of the Contractor if the transferor destroys all copies of the program and related computer software documentation in its possession and notifies the licensor of the transfer. Transferred programs remain subject to the provisions of this clause;

(3) Make a reasonable number of copies of the computer software required for the purposes of safekeeping (archive), backup, modification, or other activities authorized in paragraphs (1), (2), (4) and (5) of this definition;

(4) Modify computer software provided that the Government may--

(i) Use the modified software only as provided in paragraphs (1) and (3) of this definition; and

(ii) Not release or disclose the modified software except as provided in paragraphs (2) and (5) of this clause;

(5) Use, modify, reproduce, perform, display, or release or disclose the computer software, and permit contractors, subcontractors, or covered Government support contractors to do so, for purposes set forth in subparagraph (i) of this paragraph, subject to the conditions set forth in subparagraphs (ii) of this paragraph:

(i)(A) In performance of service contracts (see FAR 37.101), to diagnose and correct deficiencies, to modify the software to enable a computer program to be combined with, adapted to, or merged with other computer programs, or when necessary to respond to urgent tactical situations, provided that the Government notifies the party which has granted restricted rights that any such release or disclosure to particular contractors or subcontractors was made;

(B) To perform emergency repairs or overhaul of items or components procured under this or a related contract, when necessary to perform such repairs or overhaul; or

(C) For the management and oversight of a program or effort by a person authorized to receive restricted rights computer software, including in the performance of covered Government support contracts.

(ii)(A) Any contractor, subcontractor, or covered Government support contractor receiving access to the software for the purposes of subparagraphs (i), (ii), or (iii) of this paragraph shall be subject to the use and nondisclosure agreement at 227.7103-7 or be performing a Government contract that contains the clause at 252.227-7994, Limitations on the Use or Disclosure of Government-Furnished Information Marked with Restrictive Legends;

(B) The Government must not permit any recipient of the software under this paragraph to decompile, disassemble, or reverse engineer the software, or use software decompiled, disassembled, or reverse engineered by the Government pursuant to paragraph (4) of this definition, for any other purpose; and

(C) Any use, modification, reproduction, performance, display, release, or disclosure of the computer software under this paragraph remains subject to the limitations in paragraphs (1) through (4) of this definition.

"Small Business Innovation Research/Small Business Technology Transfer (SBIR/STTR) data" means all technical data or computer software developed or generated in the performance of a phase I, II, or III SBIR/STTR contract or subcontract.

"Technical data" means recorded information, regardless of the form or method of the recording, of a scientific or technical nature (including computer software documentation). The term does not include computer software or financial, administrative, cost or pricing, or management information, or information incidental to contract administration.

"Unlimited rights" means rights to use, modify, reproduce, perform, display, release, or disclose technical data, computer software, or computer software documentation in whole or in part, in any manner, and for any purpose whatsoever, and to have or authorize others to do so.

(b) . (1) Except as provided in paragraph (b)(2) of this clause--Applicability

(i) This clause governs all technical data related to other than commercial products or commercial services or to any portion of a commercial product or commercial service that was developed in any part at Government expense;

(ii) This clause governs all other than commercial computer software or other than commercial computer software documentation; and

(iii) The clause at DFARS 252.227-7990, Technical Data--Commercial Products and Commercial Services, governs the technical data related to any portion of a commercial product or commercial service that was developed exclusively at private expense.

(2) The clause at DFARS 252.227-7993, Rights in Other Than Commercial Technical Data and Computer Software--Small Business Innovation Research Program and Small Business Technology Transfer Program, governs technical data that are SBIR/STTR data.

(c) . The Contractor grants or shall obtain for the Government the following royalty free, Rights in technical data and computer software worldwide, nonexclusive, irrevocable license rights:

(1) . The Government shall have unlimited rights in technical data, computer software, or computer software documentation Unlimited rights that are--

(i) Data related to an item, component, or process which has been or will be developed exclusively with Government funds;

(ii) Studies, analyses, test data, or similar data produced for this contract, when the study, analysis, test, or similar work was specified as an element of performance;

(iii) Technical data created exclusively with Government funds in the performance of a contract that does not require the development, manufacture, construction, or production of items, components, or processes;

(iv) Form, fit, and function data;

(v) Technical data necessary for installation, operation, maintenance, or training purposes (other than detailed manufacturing or process data);

(vi) Government-furnished corrections or changes to--

(A) Technical data furnished to the Contractor by the Government; or

(B) Computer software or computer software documentation;

(vii) Data, computer software, or computer software documentation that is publicly available or previously released or disclosed by the Contractor or subcontractor without restrictions on further use, release or disclosure, other than a release or disclosure resulting from the sale, transfer, or other assignment of interest in the technical data to another party or the sale or transfer of some or all of a business entity or its assets to another party;

(viii) Data, computer software, or computer software documentation in which the Government has obtained unlimited rights under another Government contract or as a result of negotiations;

(ix) Data furnished to the Government, under this or any other Government contract or subcontract, with--

(A) Government purpose license rights or limited rights and the restrictive condition(s) has/have expired; or

(B) Government purpose rights and the Contractor's exclusive right to use such data for commercial purposes has expired; or

(x) Computer software developed exclusively with Government funds;

(xi) Computer software documentation the contractor must deliver under this contract; or

(xvii) Computer software or computer software documentation furnished to the Government, under this or any other Government contract or subcontract with--

(A) Restricted rights in computer software, limited rights in technical data, or government purpose license rights and the restrictive conditions have expired; or

(B) Government purpose rights and the Contractor's exclusive right to use such software or documentation for commercial purposes has expired.

(2) . (i) The Government shall have government purpose rights for a 5-year period, or such other period as may be Government purpose rights negotiated, in technical data or computer software--

(A) Related to items, components, or processes developed with mixed funding except when the Government is entitled to unlimited rights in such data or software as provided in paragraphs (c)(1)(ii), (c)(1)(iv) through (c)(1)(ix), and (c)(1)(xii) through (c)(1)(x)(v)(i) of this clause; or

(B) Created with mixed funding in the performance of a contract that does not require the development, manufacture, construction, or production of items, components, or processes.

(ii) The 5-year period, or such other period as may have been negotiated, shall begin upon execution of the contract, subcontract, letter contract (or similar contractual instrument), contract modification, or option exercise that required development of the items, components, or processes, development of the computer software, or creation of the data described in paragraph (c)(2)(i)(B) of this clause. Upon expiration of the 5-year or other negotiated period, the Government shall have unlimited rights in the technical data or computer software.

(iii) The Government will not release or disclose technical data or computer software in which it has government purpose rights unless--

(A) Prior to release or disclosure, the intended recipient completes the nondisclosure agreement at DFARS 227.7103-7; or

(B) The recipient is a Government contractor receiving access to the data or software for performance of a Government contract that contains the clause at DFARS 252.227-7994, Limitations on the Use or Disclosure of Government-Furnished Information Marked with Restrictive Legends.

(iv) The Contractor has the exclusive right, including the right to license others, to use technical data or computer software in which the Government has obtained government purpose rights under this contract for any commercial purpose during the time period specified in the government purpose rights legend prescribed in paragraph (g)(3) of this clause.

(3) . (i) Except as provided in paragraphs (c)(1)(ii) and (c)(1)(iv) through (c)(1)(ix) of this clause, the Government shall…