Attachment6mercuricoxideSDS.pdf
PDF 12 KB Posted
- Attached to
- Silver Reclamation Amendment 0004
- Solicitation number
- N0025319Q0307
View the file
Other files
Show all 12
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Material Safety Data Sheet U.S. Department of Labor May be used to comply with Occupational Safety and Health Administration OSHA's Hazard Communication Standard, (Non-Mandatory Form) 29 CFR 1910.1200. Standard must be Form Approved consulted for specific requirements. OMB No. 1218-0072 IDENTITY (As Used on Label and List) Note: Blank spaces are not permitted. If any item is not applicable, or no
Wet or Dry Silver-Zinc Battery w/Mercuric Oxide information is available, the space must be marked to indicate that.
Section I Manufacturer's Name Emergeny Telephone Number
EaglePicher Technologies, LLC/Yardney Division (800) 424-9300 Address (Number, Street, City, State, and Zip Code) Telephone Number for Information
2000 South County Trail 401-471-6580 Date Prepared
East Greenwich, RI 02818-1530 12/2/2015 Signature of Preparer (optional)
Section II - Hazardous Ingredients/Identity Information Other Limits
Hazardous Components (Specific Chemical Identity; Common Name(s)) OSHA PEL ACGIH TLV Recommended % (optional)
Potassium Hydroxide (Electrolyte) 2 mg/m3 C
Zinc (as fume) 5.0 mg/m3
Silver (as dust or fume) .01 mg/m3
Mercuric Oxide (fume) .025 mg/m3 1 mg/10m3 OSHA ceiling
(Under normal conditions of use or service this battery does not expose the user to toxic fumes. Prior to use care must be taken filling a dry cell with electrolyte in order to avoid a severe chemical burn to expose tissue.
Skin and eye protection is strongly recommended for the cell/battery fill operation.)
This product contains the following EPCRA Section 313 chemicals: Mercury, Silver, & Zinc Compounds.
Section III - Physical/Chemical Characteristics Boiling Point Specific Gravity (H2O = 1)
NA NA
Vapor Pressure (mm Hg.) Melting Point
NA NA
Vapor Density (AIR = 1) Evaporation Rate
NA (Butyl Acetate = 1) NA Solubility in Water
NA
Appearance and Odor
No Odor
Section IV - Fire and Explosion Hazard Data Flash Point (Method Used) Flammable Limits LEL UEL
NA NA NA NA
Extinguishing Media
Dry Chemical Extinguisher Special Fire Fighting Procedures
Avoid breathing fumes, wear self contained breathing apparatus
Unusual Fire and Explosion Hazards
Intense heat and acrid smoke from burning metal and plastic components
(Reproduce locally) OSHA 174, Sept. 1985
Section V - Reactivity Data Stability Unstable Conditions to Avoid
Normally NA Short circuiting positive and negative terminals.
Stable Stable
NA
Incompatibility (Materials to Avoid)
Acids, Solvents Hazardous Decomposition or Byproducts
Mercuric oxide fumes, hydrogen gas Hazardous May Occur Conditions to Avoid
Polymerization NA NA Will Not Occur
NA
Section VI - Health Hazard Data Route(s) of Entry Inhalation? Skin? Ingestion?
X X X Health Hazards (Acute and Chronic)
Potassium Hydroxide is corrosive to skin and eyes. Mercuric Oxide bio accumulates in human tissues. Silver bio accumulates in human tissue. Zinc bio accumulates in human tissue. Zinc fumes can cause respiratory distress.
Carcinogenicity: NTP? IARC Monographs? OSHA Regulated?
No No No
Signs and Symptoms of Exposure
To Potassium Hydroxide: Skin & eye irritation. To Silver: Argyria. To Mercuric Oxide: Loss of memory, tremors. To Zinc: Metal fume fever.
Medical Conditions
Generally Aggravated by Expos NA
Emergency and First Aid Procedures
Remove injured personnel from area immediately. Flush eyes and skin with copious amounts of water for Potassium Hydroxide involvement and seek medical attention immediately.
Section VII - Precautions for Safe Handling and Use Steps to Be Taken in Case Material is Released or Spilled
Contain Potassium Hydroxide, ventilate the area. Neutralize the Potassium Hydroxide with boric acid. Do not flush to sanitary sewer, collect all spillage and debris for proper dispoal.
Waste Disposal Method
Silver-zinc Cells and batteries contain RCRA regulated metals and a corrosive liquid. They should be recycled to reclaim the silver in accordance with state, and federal regulations.
Precautions to Be Taken in Handling and Storage
Avoid short circuiting terminals of wet cells and batteries. Avoid exposure to intense heat or fire.
Do not open these cells and expose the internal components.
Other Precautions
Wet batteries are regulated. Proper shipping name - Batteries Wet, filled with Alkali, Hazard Class 8,UN2795, PG III
Section VIII - Control Measures Respiratory Protection (Specific Type)
NA
Ventilation Local Exhaust Special
Yes Mechanical (General) Other
Per ACGIH Handbook Recommendation Protective Gloves Eye Protection
Chemical resistant (Fill Operation) Goggles Other Protective Clothing or Equipment
Chemical Resistant Apron (Fill Operation) Work Hygienic Practices
Wash thoroughly after working with AgZn Batteries.
g:\files\forms\safety\msds\wet or dry AgZn with mercuric oxide Page 2 U.S.G.P.O. 1986-491-529/45775
File details come from the government source that posted it. Updated .