The file's text, extracted by GovTribe without its formatting.
Power and Lighting panels
| Item number |
| Power and lighting panels |
| Item 001 |
| Pow-R-Line CSwitchboard, Front Access/ Front and Rear Align, Type 1, 480V 3-Phase 3-Wire, 400 Copper, Minimum Interrupting Rating: 100kA, Bus Bracing Rating: 100kA |
| Item 002 |
| Pow-R-Line CSwitchboard, Front Access/ Front and Rear Align, Type 1, 208Y/120V 3-Phase 4-Wire, 800 Copper, Minimum Interrupting Rating: 100kA, Bus Bracing Rating: 100kA |
| Item 3 |
| Power panel 2-35-4 |
| Item 010 |
| Power panel 1-33-2 |
| Item 011 |
| Power panel 1-35-3 |
Upon delivery, it is required to provide a certificate or letter of authenticity stating that the switchboard utilizes only new product(s) and manufactured/assembled by Eaton Corporation as required by the referenced drawings.
| Item No. |
| Qty |
| Product |
| Description |
| 001 |
| 1 |
| Switchboards |
| Pow-R-Line CSwitchboard, Front Access/ Front and Rear Align, Type 1, 480V 3-Phase 3-Wire, 400 Copper, Minimum Interrupting Rating: 100kA, Bus Bracing Rating: 100kA |
| Designation |
| YFND 30 480V Switchboard |
| 1 |
| Seismic Freestanding Label (IBC/CBC Seismic Qualified) |
| 2 |
| 400 Amp CU Distribution Structure (Density Rated Bus) |
| 2 |
| 11X Compartment W/ Door |
| 2 |
| Shunt Trip (480-600Vac) |
| 2 |
| Auxiliary switch, (1A/1B) |
| 18 |
| Thermal Mag Trip - Standard |
| 1 |
| PROVIDE 25W DEADFRONTS WITH SPECIAL GUTTER COVERS |
| 1 |
| DOC to provide and install IQ260 meter |
| 1 |
| SEAL ALL BREAKERS AND REMOVE LINE AND LOAD LABELS |
| 1 |
| Section 1 of the 480v TO HAVE two 11X blank meterinf buckets FOR DOC to install Phase meter, lights, and switches |
| 1 |
| Remove all Neutral bus in 480v |
| 1 |
| small opening dead front covers for F frame through-out Use 6554C31H01 |
| 1 |
| Provide standard swbd labels loose and DOC to install labels. San Diego DOC will provide all other nameplates |
| 1 |
| Use 3 - 3 poinit terminal blocks next to main breakers and install on left side of chasis |
| 1 |
| terminal block mounting brackets plate 4 1/2 wide x 1 3/4 high ( Blank filler type) |
| 1 |
| 75va CPT and disconnect, ship loose |
| 2 |
| Structure Bus Bracing - 100 kA |
| 1 |
| Install both CTs on right side of section 1 (400:5 and 200:5) |
| 1 |
| Ground lugs, Use double 350 to #6 T/A's 2 of in Section 1, 480 v switchboard for 400 amp breaker |
| 1 |
| TVSS shall be seperate and provided by DOC. 30 amp breaker is for TVSS |
| 1 |
| DOC to provide Ground Detection |
| 1 |
| 400A 3P [KDC 400A Frame], Trip 400 A, Thermal Mag, (1) 500-750 kcmil, Mechanical |
| 1 |
| 200A 3P [KDC 400A Frame], Trip 200 A, Thermal Mag, (1) 250-500 kcmil, Mechanical |
| 1 |
| 225A 3P [FDC 225A Frame], Trip 225 A, Thermal Mag, (1) #4-4/0, Mechanical |
| 2 |
| 30A 3P [FDC 225A Frame], Trip 30 A, Thermal Mag, (1) #14-1/0, Mechanical |
| 9 |
| 15A 3P [FDC 225A Frame], Trip 15 A, Thermal Mag, (1) #14-1/0, Mechanical |
| 1 |
| 70A 3P [FDC 225A Frame], Trip 70 A, Thermal Mag, (1) #14-1/0, Mechanical |
| 3 |
| 100A 3P [FDC 225A Frame], Trip 100 A, Thermal Mag, (1) #14-1/0, Mechanical |
| Item No. |
| Qty |
| Product |
| Description |
| 002 |
| 1 |
| Switchboards |
| Pow-R-Line CSwitchboard, Front Access/ Front and Rear Align, Type 1, 208Y/120V 3-Phase 4-Wire, 800 Copper, Minimum Interrupting Rating: 100kA, Bus Bracing Rating: 100kA |
| Designation |
| YFND 30, 120V Switchboard |
| 1 |
| Structure Bus Bracing - 100 kA |
| 1 |
| Seismic Freestanding Label (IBC/CBC Seismic Qualified) |
| 1 |
| 800 Amp CU Distribution Structure (Density Rated Bus) |
| 16 |
| Thermal Mag Trip - Standard |
| 1 |
| NOTE: this is a 3 phase 3 wire 120 v |
| 1 |
| NOTE: Remove all Neutral bus in 120V |
| 1 |
| NOTE: provisions in all spaces that do not have breakers |
| 1 |
| NOTE: San Diego DOC will provide all name plates |
| 1 |
| NOTE small opening dead front covers for F frame through-out Use 6554C31H01 |
| 1 |
| NOTE: main lugs to be 4of - 600 MCM per phase, turn downward 90 degrees |
| 1 |
| NOTE: provide ground lugs T/A Doubles for the circuit breakers (16 of), #14 to 1/0 double barrel |
| 1 |
| NOTE: all factory labels send as separate/ loose , San Diego DOC to install |
| 1 |
| NOTE: Switchboard size is 36" wide x 30" deep |
| 1 |
| DOC to provide Ground Detection |
| 2 |
| 100A 3P [HFD 225A Frame], Trip 100 A, Thermal Mag, (1) #14-1/0, Mechanical |
| 8 |
| 50A 3P [HFD 225A Frame], Trip 50 A, Thermal Mag, (1) #14-1/0, Mechanical |
| 5 |
| 70A 3P [HFD 225A Frame], Trip 70 A, Thermal Mag, (1) #14-1/0, Mechanical |
| 1 |
| 30A 3P [HFD 225A Frame], Trip 30 A, Thermal Mag, (1) #14-1/0, Mechanical |
| Item No. |
| Qty |
| Product |
| Description |
| 003I |
| 1 |
| Panelboards |
| 48 Circuits, 400A, Fully Rated, 480V 3Ph 3W, Copper Bus, 35k AIC, 400A, Main Lugs Only[Top Fed], Surface Mounted |
| Catalog No |
| P3E400LT48CH02X |
| Designation |
| Power panel 2-35-4 |
| 1 |
| 40A, 3P FD Branch Breaker |
| 6 |
| 15A, 3P FD Branch Breaker |
| 9 |
| 20A, 3P FD Branch Breaker |
| 1 |
| Copper Main Bus, 400 Amps |
| 1 |
| Std. Bolted Cu Ground Bar (Cu Cable Only) |
| 1 |
| Panel Nameplate - White with Black Letters |
| 1 |
| DP2072 Box, Made in America |
| 1 |
| Type 2 Enclosure: DP2072 |
| 1 |
| Weather shield/ Drip edge with weep hole |
| Item No. |
| Qty |
| Product |
| Description |
| 004I |
| 1 |
| Panelboards |
| 42 Circuits, 250A, Fully Rated, 208Y/120V 3Ph 4W, Copper Bus, 10k AIC, 250A, Main Lugs Only[Top Fed], Surface Mounted |
| Catalog No |
| P3A250LT42CH01X |
| Designation |
| Ltg panel 2-35-2 |
| 42 |
| 15A, 1P BAB Branch Breaker |
| 1 |
| Copper Main Bus, 250 Amps |
| 1 |
| Std. Bolted Cu Ground Bar (Cu Cable Only) |
| 1 |
| Panel Nameplate - White with Black Letters |
| 1 |
| Type 1 Enclosure: EZB2060R |
| 1 |
| EZ Trim, Door in Door, Concealed Hardware: EZT2060S |
| 1 |
| Drip edge with weep hole |
| 1 |
| The is a 120 v, 3 phase system, remove neutral |
| Item No. |
| Qty |
| Product |
| Description |
| 005I |
| 1 |
| Panelboards |
| 42 Circuits, 250A, Fully Rated, 208Y/120V 3Ph 4W, Copper Bus, 10k AIC, 250A, Main Lugs Only[Top Fed], Surface Mounted |
| Catalog No |
| P3A250LT42CH01X |
| Designation |
| Ltg panel 1-26-1 |
| 42 |
| 20A, 1P BAB Branch Breaker |
| 1 |
| Copper Main Bus, 250 Amps |
| 1 |
| Std. Bolted Cu Ground Bar (Cu Cable Only) |
| 1 |
| Panel Nameplate - White with Black Letters |
| 1 |
| Type 1 Enclosure: EZB2060R |
| 1 |
| EZ Trim, Door in Door, Concealed Hardware: EZT2060S |
| 1 |
| Drip edge with weep hole |
| 1 |
| The is a 120 v, 3 phase system, remove neutral |
| Item No. |
| Qty |
| Product |
| Description |
| 006I |
| 1 |
| Panelboards |
| 42 Circuits, 250A, Fully Rated, 208Y/120V 3Ph 4W, Copper Bus, 10k AIC, 250A, Main Lugs Only[Top Fed], Surface Mounted |
| Catalog No |
| P3A250LT42CH01X |
| Designation |
| Ltg panel 1-27-1 |
| 42 |
| 15A, 1P BAB Branch Breaker |
| 1 |
| Copper Main Bus, 250 Amps |
| 1 |
| Std. Bolted Cu Ground Bar (Cu Cable Only) |
| 1 |
| Panel Nameplate - White with Black Letters |
| 1 |
| Type 1 Enclosure: EZB2060R |
| 1 |
| EZ Trim, Door in Door, Concealed Hardware: EZT2060S |
| 1 |
| Drip edge with weep hole |
| 1 |
| The is a 120 v, 3 phase system, remove neutral |
| Item No. |
| Qty |
| Product |
| Description |
| 007I |
| 1 |
| Panelboards |
| 52 Circuits, 250A, Fully Rated, 208Y/120V 3Ph 4W, Copper Bus, 10k AIC, 250A, Main Lugs Only[Top Fed], Surface Mounted |
| Catalog No |
| P3A250LT60CH01X |
| Designation |
| Pwr panel 1-35-1 |
| 10 |
| 15A, 1P BAB Branch Breaker |
| 17 |
| 15A, 2P BAB Branch Breaker |
| 2 |
| 30A, 2P BAB Branch Breaker |
| 2 |
| 20A, 2P BAB Branch Breaker |
| 1 |
| Copper Main Bus, 250 Amps |
| 1 |
| Std. Bolted Cu Ground Bar (Cu Cable Only) |
| 1 |
| Panel Nameplate - White with Black Letters |
| 1 |
| Type 1 Enclosure: EZB2072R |
| 1 |
| EZ Trim, Door in Door, Concealed Hardware: EZT2072S |
| 1 |
| Drip edge with weep hole |
| 1 |
| The is a 120 v, 3 phase system, remove neutral |
| Item No. |
| Qty |
| Product |
| Description |
| 008I |
| 1 |
| Panelboards |
| 84 Circuits, 250A, Fully Rated, 208Y/120V 3Ph 4W, Copper Bus, 10k AIC, 250A, Main Lugs Only[Top Fed], Surface Mounted |
| Catalog No |
| P3A250LT84CH01X |
| Designation |
| Ltg panel 2-35-2 |
| 42 |
| 20A, 1P BAB Branch Breaker |
| 42 |
| 15A, 1P BAB Branch Breaker |
| 1 |
| Copper Main Bus, 250 Amps |
| 1 |
| Std. Bolted Cu Ground Bar (Cu Cable Only) |
| 1 |
| Panel Nameplate - White with Black Letters |
| 1 |
| Type 1 Enclosure: EZB2090R |
| 1 |
| EZ Trim, Door in Door, Concealed Hardware: EZT2090S |
| 1 |
| Drip edge with weep hole |
| 1 |
| The is a 120 v, 3 phase system, remove neutral |
| Item No. |
| Qty |
| Product |
| Description |
| 009I |
| 1 |
| Panelboards |
| 48 Circuits, 250A, Fully Rated, 208Y/120V 3Ph 4W, Copper Bus, 10k AIC, 250A, Main Lugs Only[Top Fed], Surface Mounted |
| Catalog No |
| P3A250LT48CH01X |
| Designation |
| Pwr panel 2-19-2 |
| 15 |
| 15A, 2P BAB Branch Breaker |
| 12 |
| 15A, 1P BAB Branch Breaker |
| 6 |
| 20A, 1P BAB Branch Breaker |
| 1 |
| Copper Main Bus, 250 Amps |
| 1 |
| Std. Bolted Cu Ground Bar (Cu Cable Only) |
| 1 |
| Panel Nameplate - White with Black Letters |
| 1 |
| Type 1 Enclosure: EZB2060R |
| 1 |
| EZ Trim, Door in Door, Concealed Hardware: EZT2060S |
| 1 |
| Drip edge with weep hole |
| 1 |
| The is a 120 v, 3 phase system, remove neutral |
| Item No. |
| Qty |
| Product |
| Description |
| 010I |
| 1 |
| Panelboards |
| 15 Circuits, 250A, Fully Rated, 480V 3Ph 3W, Copper Bus, 35k AIC, 250A, Main Lugs Only[Top Fed], Surface Mounted |
| Catalog No |
| P3E250LT24CH02X |
| Designation |
| Power panel 1-33-2 |
| 2 |
| 20A, 3P FD Branch Breaker |
| 3 |
| 25A, 3P FD Branch Breaker |
| 1 |
| Copper Main Bus, 250 Amps |
| 1 |
| Std. Bolted Cu Ground Bar (Cu Cable Only) |
| 1 |
| Panel Nameplate - White with Black Letters |
| 1 |
| DP2048 Box, Made in America |
| 1 |
| Type 2 Enclosure: DP2048 |
| 1 |
| Weather shield/ Drip edge with weep hole |
| Item No. |
| Qty |
| Product |
| Description |
| 011I |
| 1 |
| Panelboards |
| 48 Circuits, 400A, Fully Rated, 480V 3Ph 3W, Copper Bus, 35k AIC, 400A, Main Lugs Only[Top Fed], Surface Mounted |
| Catalog No |
| P3E400LT48CH02X |
| Designation |
| Power panel 1-35-3 |
| 1 |
| 70A, 3P FD Branch Breaker |
| 2 |
| 50A, 3P FD Branch Breaker |
| 4 |
| 30A, 3P FD Branch Breaker |
| 9 |
| 20A, 3P FD Branch Breaker |
| 1 |
| Copper Main Bus, 400 Amps |
| 1 |
| Std. Bolted Cu Ground Bar (Cu Cable Only) |
| 1 |
| Panel Nameplate - White with Black Letters |
| 1 |
| DP2072 Box, Made in America |
| 1 |
| Type 2 Enclosure: DP2072 |
| 1 |
| Weather shield/ Drip edge with weep hole |
Reference 1054SNK2Q8293, PG821206X6K1
