Ref_2.1-(DISTR D)_808-T01-07-260807 - ITEM 20 - TC STUD (1).pdf

A

B

C

D

A

B

C

D

8 7 6 5 4 3 2 1

8 7 6 5 4 3 2 1

.375±.004

5.808±.004 6.183±.008

.750±.004

.472±.004

SQUARE

R.063±.004

⌀.120±.010 THRU45°±5°

TYP

PREPARED BY

M SANCHEZ DE LOZADA

2026.08.07

CHECKED BY

S KINGSBURY

2026.08.07

APPROVED BY

SHEET 1 OF 1EST UNIT WT: 1.2 LBSCALE: 1.000

REVDWG NOCAGE CODESIZE

TITLE

SCALE 0.750

M24x3-6g

SECTION 5B-5B

LIST OF MATERIAL

ITEM QTY MATERIAL MATERIAL SPEC REMARKS

1 1 NICUAL QQ-N-286 ANN-AH UNS N05500, SEE NOTE 201

-808-T01-07-260807-B

ITEM 20 - TC STUD

NAVAL SURFACE WARFARE CENTER

CARDEROCK DIVISION

WEST BETHESDA, MD 20817

DISTRIBUTION STATEMENT D:

DISTRIBUTION AUTHORIZED TO DEPARTMENT OF

DEFENSE AND U.S. DOD CONTRACTORS ONLY; CRITICAL

TECHNOLOGY, (JUNE 2010). OTHER REQUESTS FOR THIS

DOCUMENT SHALL BE REFERRED TO NSWC,

CARDEROCK DIVISION, CODE 808

GENERAL NOTES

101. UNLESS OTHERWISE NOTED ALL DIMENSIONS ARE IN INCHES.

FABRICATION NOTES

201. ALL STUDS SHALL BE MADE FROM QQ-N-286 ANN (ANNEALED), AH (AGE HARDENED).

202. UNLESS OTHERWISE NOTED:

A) EXTERNAL EDGES SHALL HAVE A RADIUS OF R .01-.03 OR HAVE A CHAMFER OF

.01-.03X45° ±10°

B) INTERNAL CORNERS SHALL HAVE A RADIUS OF R .01-.03

203. SURFACE FINISH SHALL NOT EXCEED 125 MICROINCHES ON THE STUD BODY NOR

EXCEED 32 MICROINCHES ON THE STUD THREADS.

204. STUD THREADS SHALL BE CUT. STUD THRU HOLE MAY BE MADE BY ELECTRICAL

DISCHARGE MACHINING (EDM).

205. THE STUD THREADS SHALL MEET DIMENSIONAL REQUIREMENTS OF ASME B1.13M-2005.

THREADS SHALL BE RIGHT HAND.

INSPECTION

301. INSPECTION FOR STUD THREAD DIMENSIONAL ACCEPTABILITY SHALL BE IAW ASME B1.3-2007 SYSTEM 21.

302. CERTIFICATION PACKAGE IS REQUIRED FOR ACCEPTANCE OF EACH LOT OF STUDS. ALL CERTIFICATIONS SHALL INCLUDE THE HEAT/LOT NUMBER FOR TRACEABILITY, BE ON COMPANY LETTERHEAD, AND CONTAIN THE NAME, TITLE, AND SIGNATURE OF THE CERTIFYING OFFICIAL. THE CERTIFICATION PACKAGE MUST

INCLUDE THE FOLLOWING:

A) A CERTIFICATE OF CONFORMANCE TO THIS DRAWING OR THE APPLICABLE PROCUREMENT DOCUMENT

B) MATERIAL CERTIFICATIONS

C) FULL DIMENSIONAL INSPECTION REPORT

D) THREAD GAGE VERIFICATION

E) ALL APPLICABLE WAIVERS AND DEVIATIONS

PACKAGING

303. STUDS SHALL HAVE THEIR ENTIRE LENGTH PROTECTED BY MEANS OF SLEEVE. STUDS SHALL BE PACKAGED AS SUCH THAT THEY DO NOT COME IN CONTACT DURING SHIPMENT. SEE CONTRACT FOR

ADDITIONAL PACKAGING REQUIREMENTS.

ISO-10303-21;

HEADER;

FILE_DESCRIPTION((''),'2;1');

FILE_NAME('ITEM_20-TC_STUD','2026-08-07T07:39:43',('marvin.lozada'),(''), 'CREO PARAMETRIC BY PTC INC, 2026053','CREO PARAMETRIC BY PTC INC, 2026053','');

FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));

ENDSEC;

DATA;

#1=CARTESIAN_POINT('',(3.0915E0,0.E0,0.E0));

#2=DIRECTION('',(1.E0,0.E0,0.E0));

#3=DIRECTION('',(0.E0,-1.E0,0.E0));

#4=AXIS2_PLACEMENT_3D('',#1,#2,#3);

#6=CARTESIAN_POINT('',(3.0915E0,0.E0,0.E0));

#7=DIRECTION('',(1.E0,0.E0,0.E0));

#8=DIRECTION('',(0.E0,1.E0,0.E0));

#9=AXIS2_PLACEMENT_3D('',#6,#7,#8);

#11=CARTESIAN_POINT('',(3.0915E0,0.E0,0.E0));

#12=DIRECTION('',(1.E0,0.E0,0.E0));

#13=DIRECTION('',(0.E0,-1.E0,0.E0));

#14=AXIS2_PLACEMENT_3D('',#11,#12,#13);

#16=CARTESIAN_POINT('',(3.0915E0,0.E0,0.E0));

#17=DIRECTION('',(1.E0,0.E0,0.E0));

#18=DIRECTION('',(0.E0,1.E0,0.E0));

#19=AXIS2_PLACEMENT_3D('',#16,#17,#18);

#21=DIRECTION('',(-1.E0,0.E0,0.E0));

#22=VECTOR('',#21,6.183E0);

#23=CARTESIAN_POINT('',(3.0915E0,-6.E-2,0.E0));

#24=LINE('',#23,#22);

#25=DIRECTION('',(0.E0,1.E0,0.E0));

#26=VECTOR('',#25,4.72E-1);

#27=CARTESIAN_POINT('',(-3.0915E0,-2.36E-1,-2.36E-1));

#28=LINE('',#27,#26);

#29=DIRECTION('',(0.E0,0.E0,1.E0));

#30=VECTOR('',#29,4.72E-1);

#31=CARTESIAN_POINT('',(-3.0915E0,2.36E-1,-2.36E-1));

#32=LINE('',#31,#30);

#33=DIRECTION('',(0.E0,-1.E0,0.E0));

#34=VECTOR('',#33,4.72E-1);

#35=CARTESIAN_POINT('',(-3.0915E0,2.36E-1,2.36E-1));

#36=LINE('',#35,#34);

#37=DIRECTION('',(0.E0,0.E0,-1.E0));

#38=VECTOR('',#37,4.72E-1);

#39=CARTESIAN_POINT('',(-3.0915E0,-2.36E-1,2.36E-1));

#40=LINE('',#39,#38);

#41=CARTESIAN_POINT('',(-3.0915E0,0.E0,0.E0));

#42=DIRECTION('',(1.E0,0.E0,0.E0));

#43=DIRECTION('',(0.E0,-1.E0,0.E0));

#44=AXIS2_PLACEMENT_3D('',#41,#42,#43);

#46=CARTESIAN_POINT('',(-3.0915E0,0.E0,0.E0));

#47=DIRECTION('',(1.E0,0.E0,0.E0));

#48=DIRECTION('',(0.E0,1.E0,0.E0));

#49=AXIS2_PLACEMENT_3D('',#46,#47,#48);

#51=DIRECTION('',(1.E0,0.E0,0.E0));

#52=VECTOR('',#51,3.75E-1);

#53=CARTESIAN_POINT('',(-3.0915E0,-2.36E-1,-2.36E-1));

#54=LINE('',#53,#52);

#55=DIRECTION('',(1.E0,0.E0,0.E0));

#56=VECTOR('',#55,3.75E-1);

#57=CARTESIAN_POINT('',(-3.0915E0,-2.36E-1,2.36E-1));

#58=LINE('',#57,#56);

#59=DIRECTION('',(1.E0,0.E0,0.E0));

#60=VECTOR('',#59,3.75E-1);

#61=CARTESIAN_POINT('',(-3.0915E0,2.36E-1,2.36E-1));

#62=LINE('',#61,#60);

#63=DIRECTION('',(1.E0,0.E0,0.E0));

#64=VECTOR('',#63,3.75E-1);

#65=CARTESIAN_POINT('',(-3.0915E0,2.36E-1,-2.36E-1));

#66=LINE('',#65,#64);

#67=DIRECTION('',(0.E0,1.E0,0.E0));

#68=VECTOR('',#67,4.72E-1);

#69=CARTESIAN_POINT('',(-2.7165E0,-2.36E-1,-2.36E-1));

#70=LINE('',#69,#68);

#71=DIRECTION('',(0.E0,0.E0,-1.E0));

#72=VECTOR('',#71,4.72E-1);

#73=CARTESIAN_POINT('',(-2.7165E0,-2.36E-1,2.36E-1));

#74=LINE('',#73,#72);

#75=DIRECTION('',(0.E0,-1.E0,0.E0));

#76=VECTOR('',#75,4.72E-1);

#77=CARTESIAN_POINT('',(-2.7165E0,2.36E-1,2.36E-1));

#78=LINE('',#77,#76);

#79=DIRECTION('',(0.E0,0.E0,1.E0));

#80=VECTOR('',#79,4.72E-1);

#81=CARTESIAN_POINT('',(-2.7165E0,2.36E-1,-2.36E-1));

#82=LINE('',#81,#80);

#83=CARTESIAN_POINT('',(-2.7165E0,0.E0,0.E0));

#84=DIRECTION('',(1.E0,0.E0,0.E0));

#85=DIRECTION('',(0.E0,1.E0,0.E0));

#86=AXIS2_PLACEMENT_3D('',#83,#84,#85);

#88=CARTESIAN_POINT('',(-2.7165E0,0.E0,0.E0));

#89=DIRECTION('',(1.E0,0.E0,0.E0));

#90=DIRECTION('',(0.E0,-1.E0,0.E0));

#91=AXIS2_PLACEMENT_3D('',#88,#89,#90);

#93=DIRECTION('',(-7.071067811866E-1,-7.071067811865E-1,-1.176911511772E-11));

#94=VECTOR('',#93,1.032375900539E-1);

#95=CARTESIAN_POINT('',(-2.643500000004E0,4.714999999962E-1,

-9.574461409523E-12));

#96=LINE('',#95,#94);

#97=CARTESIAN_POINT('',(2.6435E0,0.E0,0.E0));

#98=DIRECTION('',(-1.E0,0.E0,0.E0));

#99=DIRECTION('',(0.E0,-1.E0,0.E0));

#100=AXIS2_PLACEMENT_3D('',#97,#98,#99);

#102=CARTESIAN_POINT('',(-2.6435E0,0.E0,0.E0));

#103=DIRECTION('',(1.E0,0.E0,0.E0));

#104=DIRECTION('',(0.E0,1.E0,0.E0));

#105=AXIS2_PLACEMENT_3D('',#102,#103,#104);

#107=DIRECTION('',(7.071067811865E-1,7.071067811865E-1,1.176958170764E-11));

#108=VECTOR('',#107,1.032375900539E-1);

#109=CARTESIAN_POINT('',(2.643500000004E0,-4.714999999962E-1,

9.574544447138E-12));

#110=LINE('',#109,#108);

#111=DIRECTION('',(7.071067811865E-1,-7.071067811865E-1,-1.176949733486E-11));

#112=VECTOR('',#111,1.032375900539E-1);

#113=CARTESIAN_POINT('',(2.643500000004E0,4.714999999962E-1,

-9.574539930047E-12));

#114=LINE('',#113,#112);

#115=CARTESIAN_POINT('',(2.6435E0,0.E0,0.E0));

#116=DIRECTION('',(-1.E0,0.E0,0.E0));

#117=DIRECTION('',(0.E0,1.E0,0.E0));

#118=AXIS2_PLACEMENT_3D('',#115,#116,#117);

#120=DIRECTION('',(-1.E0,0.E0,0.E0));

#121=VECTOR('',#120,5.287000000008E0);

#122=CARTESIAN_POINT('',(2.643500000004E0,4.714999999962E-1,

-9.574539930047E-12));

#123=LINE('',#122,#121);

#124=CARTESIAN_POINT('',(-2.6435E0,0.E0,0.E0));

#125=DIRECTION('',(1.E0,0.E0,0.E0));

#126=DIRECTION('',(0.E0,-1.E0,0.E0));

#127=AXIS2_PLACEMENT_3D('',#124,#125,#126);

#129=DIRECTION('',(-1.E0,0.E0,0.E0));

#130=VECTOR('',#129,5.287000000008E0);

#131=CARTESIAN_POINT('',(2.643500000004E0,-4.714999999962E-1,

9.574544447138E-12));

#132=LINE('',#131,#130);

#133=DIRECTION('',(-7.071067811866E-1,7.071067811865E-1,1.176958390403E-11));

#134=VECTOR('',#133,1.032375900539E-1);

#135=CARTESIAN_POINT('',(-2.643500000004E0,-4.714999999962E-1,

9.574544220388E-12));

#136=LINE('',#135,#134);

#137=CARTESIAN_POINT('',(2.7165E0,0.E0,0.E0));

#138=DIRECTION('',(-1.E0,0.E0,0.E0));

#139=DIRECTION('',(0.E0,-1.E0,0.E0));

#140=AXIS2_PLACEMENT_3D('',#137,#138,#139);

#142=CARTESIAN_POINT('',(2.7165E0,0.E0,0.E0));

#143=DIRECTION('',(-1.E0,0.E0,0.E0));

#144=DIRECTION('',(0.E0,1.E0,0.E0));

#145=AXIS2_PLACEMENT_3D('',#142,#143,#144);

#147=CARTESIAN_POINT('',(2.7165E0,0.E0,0.E0));

#148=DIRECTION('',(-1.E0,0.E0,0.E0));

#149=DIRECTION('',(0.E0,1.E0,0.E0));

#150=AXIS2_PLACEMENT_3D('',#147,#148,#149);

#152=CARTESIAN_POINT('',(2.7165E0,0.E0,0.E0));

#153=DIRECTION('',(-1.E0,0.E0,0.E0));

#154=DIRECTION('',(0.E0,-1.E0,0.E0));

#155=AXIS2_PLACEMENT_3D('',#152,#153,#154);

#157=CARTESIAN_POINT('',(3.029E0,0.E0,0.E0));

#158=DIRECTION('',(1.E0,0.E0,0.E0));

#159=DIRECTION('',(0.E0,1.E0,0.E0));

#160=AXIS2_PLACEMENT_3D('',#157,#158,#159);

#162=DIRECTION('',(-1.E0,0.E0,-3.405979450234E-10));

#163=VECTOR('',#162,3.125E-1);

#164=CARTESIAN_POINT('',(3.029E0,-3.75E-1,1.064369037441E-10));

#165=LINE('',#164,#163);

#166=CARTESIAN_POINT('',(3.029E0,3.125E-1,-7.411120328538E-12));

#167=DIRECTION('',(0.E0,2.371558505132E-11,1.E0));

#168=DIRECTION('',(1.E0,0.E0,0.E0));

#169=AXIS2_PLACEMENT_3D('',#166,#167,#168);

#171=CARTESIAN_POINT('',(3.029E0,-3.125E-1,7.411110787559E-12));

#172=DIRECTION('',(0.E0,-2.371555382630E-11,-1.E0));

#173=DIRECTION('',(1.E0,0.E0,0.E0));

#174=AXIS2_PLACEMENT_3D('',#171,#172,#173);

#176=CARTESIAN_POINT('',(3.029E0,0.E0,0.E0));

#177=DIRECTION('',(1.E0,0.E0,0.E0));

#178=DIRECTION('',(0.E0,-1.E0,0.E0));

#179=AXIS2_PLACEMENT_3D('',#176,#177,#178);

#181=DIRECTION('',(-1.E0,0.E0,3.405979235495E-10));

#182=VECTOR('',#181,3.125E-1);

#183=CARTESIAN_POINT('',(3.029E0,3.75E-1,-1.064368970335E-10));

#184=LINE('',#183,#182);

#185=DIRECTION('',(-1.E0,0.E0,0.E0));

#186=VECTOR('',#185,6.183E0);

#187=CARTESIAN_POINT('',(3.0915E0,6.E-2,0.E0));

#188=LINE('',#187,#186);

#189=CARTESIAN_POINT('',(2.7165E0,-3.75E-1,0.E0));

#190=CARTESIAN_POINT('',(2.7165E0,3.75E-1,0.E0));

#191=VERTEX_POINT('',#189);

#192=VERTEX_POINT('',#190);

#193=CARTESIAN_POINT('',(-2.7165E0,-2.36E-1,-2.36E-1));

#194=CARTESIAN_POINT('',(-2.7165E0,2.36E-1,-2.36E-1));

#195=VERTEX_POINT('',#193);

#196=VERTEX_POINT('',#194);

#197=CARTESIAN_POINT('',(-2.7165E0,2.36E-1,2.36E-1));

#198=VERTEX_POINT('',#197);

#199=CARTESIAN_POINT('',(-2.7165E0,-2.36E-1,2.36E-1));

#200=VERTEX_POINT('',#199);

#201=CARTESIAN_POINT('',(-3.0915E0,-2.36E-1,-2.36E-1));

#202=CARTESIAN_POINT('',(-3.0915E0,2.36E-1,-2.36E-1));

#203=VERTEX_POINT('',#201);

#204=VERTEX_POINT('',#202);

#205=CARTESIAN_POINT('',(-3.0915E0,2.36E-1,2.36E-1));

#206=VERTEX_POINT('',#205);

#207=CARTESIAN_POINT('',(-3.0915E0,-2.36E-1,2.36E-1));

#208=VERTEX_POINT('',#207);

#209=CARTESIAN_POINT('',(-3.0915E0,-6.E-2,0.E0));

#210=CARTESIAN_POINT('',(-3.0915E0,6.E-2,0.E0));

#211=VERTEX_POINT('',#209);

#212=VERTEX_POINT('',#210);

#213=CARTESIAN_POINT('',(3.0915E0,-6.E-2,0.E0));

#214=VERTEX_POINT('',#213);

#215=CARTESIAN_POINT('',(3.0915E0,6.E-2,0.E0));

#216=VERTEX_POINT('',#215);

#217=CARTESIAN_POINT('',(2.6435E0,4.715E-1,0.E0));

#218=CARTESIAN_POINT('',(2.6435E0,-4.715E-1,0.E0));

#219=VERTEX_POINT('',#217);

#220=VERTEX_POINT('',#218);

#221=CARTESIAN_POINT('',(2.7165E0,3.985E-1,0.E0));

#222=CARTESIAN_POINT('',(2.7165E0,-3.985E-1,0.E0));

#223=VERTEX_POINT('',#221);

#224=VERTEX_POINT('',#222);

#225=CARTESIAN_POINT('',(-2.6435E0,4.715E-1,0.E0));

#226=CARTESIAN_POINT('',(-2.6435E0,-4.715E-1,0.E0));

#227=VERTEX_POINT('',#225);

#228=VERTEX_POINT('',#226);

#229=CARTESIAN_POINT('',(-2.7165E0,3.985E-1,0.E0));

#230=CARTESIAN_POINT('',(-2.7165E0,-3.985E-1,0.E0));

#231=VERTEX_POINT('',#229);

#232=VERTEX_POINT('',#230);

#233=CARTESIAN_POINT('',(3.0915E0,-3.125E-1,0.E0));

#234=CARTESIAN_POINT('',(3.0915E0,3.125E-1,0.E0));

#235=VERTEX_POINT('',#233);

#236=VERTEX_POINT('',#234);

#237=CARTESIAN_POINT('',(3.029E0,-3.75E-1,0.E0));

#238=CARTESIAN_POINT('',(3.029E0,3.75E-1,0.E0));

#239=VERTEX_POINT('',#237);

#240=VERTEX_POINT('',#238);

#241=CARTESIAN_POINT('',(3.0915E0,0.E0,0.E0));

#242=DIRECTION('',(1.E0,0.E0,0.E0));

#243=DIRECTION('',(0.E0,-1.E0,0.E0));

#244=AXIS2_PLACEMENT_3D('',#241,#242,#243);

#245=PLANE('',#244);

#247=ORIENTED_EDGE('',*,*,#246,.F.);

#249=ORIENTED_EDGE('',*,*,#248,.F.);

#250=EDGE_LOOP('',(#247,#249));

#251=FACE_OUTER_BOUND('',#250,.F.);

#253=ORIENTED_EDGE('',*,*,#252,.T.);

#255=ORIENTED_EDGE('',*,*,#254,.T.);

#256=EDGE_LOOP('',(#253,#255));

#257=FACE_BOUND('',#256,.F.);

#258=ADVANCED_FACE('',(#251,#257),#245,.T.);

#259=CARTESIAN_POINT('',(3.0915E0,0.E0,0.E0));

#260=DIRECTION('',(1.E0,0.E0,0.E0));

#261=DIRECTION('',(0.E0,-1.E0,0.E0));

#262=AXIS2_PLACEMENT_3D('',#259,#260,#261);

#263=CYLINDRICAL_SURFACE('',#262,6.E-2);

#265=ORIENTED_EDGE('',*,*,#264,.T.);

#267=ORIENTED_EDGE('',*,*,#266,.F.);

#268=ORIENTED_EDGE('',*,*,#252,.F.);

#270=ORIENTED_EDGE('',*,*,#269,.T.);

#271=EDGE_LOOP('',(#265,#267,#268,#270));

#272=FACE_OUTER_BOUND('',#271,.F.);

#273=ADVANCED_FACE('',(#272),#263,.F.);

#274=CARTESIAN_POINT('',(-3.0915E0,0.E0,0.E0));

#275=DIRECTION('',(1.E0,0.E0,0.E0));

#276=DIRECTION('',(0.E0,-1.E0,0.E0));

#277=AXIS2_PLACEMENT_3D('',#274,#275,#276);

#278=PLANE('',#277);

#280=ORIENTED_EDGE('',*,*,#279,.T.);

#282=ORIENTED_EDGE('',*,*,#281,.T.);

#284=ORIENTED_EDGE('',*,*,#283,.T.);

#286=ORIENTED_EDGE('',*,*,#285,.T.);

#287=EDGE_LOOP('',(#280,#282,#284,#286));

#288=FACE_OUTER_BOUND('',#287,.F.);

#289=ORIENTED_EDGE('',*,*,#264,.F.);

#291=ORIENTED_EDGE('',*,*,#290,.F.);

#292=EDGE_LOOP('',(#289,#291));

#293=FACE_BOUND('',#292,.F.);

#294=ADVANCED_FACE('',(#288,#293),#278,.F.);

#295=CARTESIAN_POINT('',(-3.0915E0,-2.36E-1,-2.36E-1));

#296=DIRECTION('',(0.E0,0.E0,1.E0));

#297=DIRECTION('',(0.E0,1.E0,0.E0));

#298=AXIS2_PLACEMENT_3D('',#295,#296,#297);

#299=PLANE('',#298);

#300=ORIENTED_EDGE('',*,*,#279,.F.);

#302=ORIENTED_EDGE('',*,*,#301,.T.);

#304=ORIENTED_EDGE('',*,*,#303,.T.);

#306=ORIENTED_EDGE('',*,*,#305,.F.);

#307=EDGE_LOOP('',(#300,#302,#304,#306));

#308=FACE_OUTER_BOUND('',#307,.F.);

#309=ADVANCED_FACE('',(#308),#299,.F.);

#310=CARTESIAN_POINT('',(-3.0915E0,-2.36E-1,2.36E-1));

#311=DIRECTION('',(0.E0,1.E0,0.E0));

#312=DIRECTION('',(0.E0,0.E0,-1.E0));

#313=AXIS2_PLACEMENT_3D('',#310,#311,#312);

#314=PLANE('',#313);

#315=ORIENTED_EDGE('',*,*,#285,.F.);

#317=ORIENTED_EDGE('',*,*,#316,.T.);

#319=ORIENTED_EDGE('',*,*,#318,.T.);

#320=ORIENTED_EDGE('',*,*,#301,.F.);

#321=EDGE_LOOP('',(#315,#317,#319,#320));

#322=FACE_OUTER_BOUND('',#321,.F.);

#323=ADVANCED_FACE('',(#322),#314,.F.);

#324=CARTESIAN_POINT('',(-3.0915E0,2.36E-1,2.36E-1));

#325=DIRECTION('',(0.E0,0.E0,-1.E0));

#326=DIRECTION('',(0.E0,-1.E0,0.E0));

#327=AXIS2_PLACEMENT_3D('',#324,#325,#326);

#328=PLANE('',#327);

#329=ORIENTED_EDGE('',*,*,#283,.F.);

#331=ORIENTED_EDGE('',*,*,#330,.T.);

#333=ORIENTED_EDGE('',*,*,#332,.T.);

#334=ORIENTED_EDGE('',*,*,#316,.F.);

#335=EDGE_LOOP('',(#329,#331,#333,#334));

#336=FACE_OUTER_BOUND('',#335,.F.);

#337=ADVANCED_FACE('',(#336),#328,.F.);

#338=CARTESIAN_POINT('',(-3.0915E0,2.36E-1,-2.36E-1));

#339=DIRECTION('',(0.E0,-1.E0,0.E0));

#340=DIRECTION('',(0.E0,0.E0,1.E0));

#341=AXIS2_PLACEMENT_3D('',#338,#339,#340);

#342=PLANE('',#341);

#343=ORIENTED_EDGE('',*,*,#281,.F.);

#344=ORIENTED_EDGE('',*,*,#305,.T.);

#346=ORIENTED_EDGE('',*,*,#345,.T.);

#347=ORIENTED_EDGE('',*,*,#330,.F.);

#348=EDGE_LOOP('',(#343,#344,#346,#347));

#349=FACE_OUTER_BOUND('',#348,.F.);

#350=ADVANCED_FACE('',(#349),#342,.F.);

#351=CARTESIAN_POINT('',(-2.7165E0,0.E0,0.E0));

#352=DIRECTION('',(-1.E0,0.E0,0.E0));

#353=DIRECTION('',(0.E0,1.E0,0.E0));

#354=AXIS2_PLACEMENT_3D('',#351,#352,#353);

#355=PLANE('',#354);

#357=ORIENTED_EDGE('',*,*,#356,.T.);

#359=ORIENTED_EDGE('',*,*,#358,.T.);

#360=EDGE_LOOP('',(#357,#359));

#361=FACE_OUTER_BOUND('',#360,.F.);

#362=ORIENTED_EDGE('',*,*,#303,.F.);

#363=ORIENTED_EDGE('',*,*,#318,.F.);

#364=ORIENTED_EDGE('',*,*,#332,.F.);

#365=ORIENTED_EDGE('',*,*,#345,.F.);

#366=EDGE_LOOP('',(#362,#363,#364,#365));

#367=FACE_BOUND('',#366,.F.);

#368=ADVANCED_FACE('',(#361,#367),#355,.T.);

#369=CARTESIAN_POINT('',(-2.680000000003E0,0.E0,0.E0));

#370=DIRECTION('',(1.E0,0.E0,0.E0));

#371=DIRECTION('',(0.E0,0.E0,-1.E0));

#372=AXIS2_PLACEMENT_3D('',#369,#370,#371);

#373=CONICAL_SURFACE('',#372,4.349999999965E-1,4.5E1);

#375=ORIENTED_EDGE('',*,*,#374,.T.);

#377=ORIENTED_EDGE('',*,*,#376,.T.);

#378=ORIENTED_EDGE('',*,*,#356,.F.);

#380=ORIENTED_EDGE('',*,*,#379,.F.);

#381=EDGE_LOOP('',(#375,#377,#378,#380));

#382=FACE_OUTER_BOUND('',#381,.F.);

#383=ADVANCED_FACE('',(#382),#373,.T.);

#384=CARTESIAN_POINT('',(-3.40065E0,0.E0,0.E0));

#385=DIRECTION('',(1.E0,0.E0,0.E0));

#386=DIRECTION('',(0.E0,-1.E0,0.E0));

#387=AXIS2_PLACEMENT_3D('',#384,#385,#386);

#388=CYLINDRICAL_SURFACE('',#387,4.715E-1);

#390=ORIENTED_EDGE('',*,*,#389,.F.);

#392=ORIENTED_EDGE('',*,*,#391,.T.);

#393=ORIENTED_EDGE('',*,*,#374,.F.);

#395=ORIENTED_EDGE('',*,*,#394,.F.);

#396=EDGE_LOOP('',(#390,#392,#393,#395));

#397=FACE_OUTER_BOUND('',#396,.F.);

#398=ADVANCED_FACE('',(#397),#388,.T.);

#399=CARTESIAN_POINT('',(2.680000000003E0,0.E0,0.E0));

#400=DIRECTION('',(-1.E0,0.E0,0.E0));

#401=DIRECTION('',(0.E0,0.E0,-1.E0));

#402=AXIS2_PLACEMENT_3D('',#399,#400,#401);

#403=CONICAL_SURFACE('',#402,4.349999999965E-1,4.5E1);

#404=ORIENTED_EDGE('',*,*,#389,.T.);

#406=ORIENTED_EDGE('',*,*,#405,.T.);

#408=ORIENTED_EDGE('',*,*,#407,.F.);

#410=ORIENTED_EDGE('',*,*,#409,.F.);

#411=EDGE_LOOP('',(#404,#406,#408,#410));

#412=FACE_OUTER_BOUND('',#411,.F.);

#413=ADVANCED_FACE('',(#412),#403,.T.);

#414=CARTESIAN_POINT('',(2.680000000003E0,0.E0,0.E0));

#415=DIRECTION('',(-1.E0,0.E0,0.E0));

#416=DIRECTION('',(0.E0,0.E0,-1.E0));

#417=AXIS2_PLACEMENT_3D('',#414,#415,#416);

#418=CONICAL_SURFACE('',#417,4.349999999965E-1,4.5E1);

#420=ORIENTED_EDGE('',*,*,#419,.T.);

#421=ORIENTED_EDGE('',*,*,#409,.T.);

#423=ORIENTED_EDGE('',*,*,#422,.F.);

#424=ORIENTED_EDGE('',*,*,#405,.F.);

#425=EDGE_LOOP('',(#420,#421,#423,#424));

#426=FACE_OUTER_BOUND('',#425,.F.);

#427=ADVANCED_FACE('',(#426),#418,.T.);

#428=CARTESIAN_POINT('',(-3.40065E0,0.E0,0.E0));

#429=DIRECTION('',(1.E0,0.E0,0.E0));

#430=DIRECTION('',(0.E0,-1.E0,0.E0));

#431=AXIS2_PLACEMENT_3D('',#428,#429,#430);

#432=CYLINDRICAL_SURFACE('',#431,4.715E-1);

#433=ORIENTED_EDGE('',*,*,#419,.F.);

#434=ORIENTED_EDGE('',*,*,#394,.T.);

#436=ORIENTED_EDGE('',*,*,#435,.F.);

#437=ORIENTED_EDGE('',*,*,#391,.F.);

#438=EDGE_LOOP('',(#433,#434,#436,#437));

#439=FACE_OUTER_BOUND('',#438,.F.);

#440=ADVANCED_FACE('',(#439),#432,.T.);

#441=CARTESIAN_POINT('',(-2.680000000003E0,0.E0,0.E0));

#442=DIRECTION('',(1.E0,0.E0,0.E0));

#443=DIRECTION('',(0.E0,0.E0,-1.E0));

#444=AXIS2_PLACEMENT_3D('',#441,#442,#443);

#445=CONICAL_SURFACE('',#444,4.349999999965E-1,4.5E1);

#446=ORIENTED_EDGE('',*,*,#435,.T.);

#447=ORIENTED_EDGE('',*,*,#379,.T.);

#448=ORIENTED_EDGE('',*,*,#358,.F.);

#449=ORIENTED_EDGE('',*,*,#376,.F.);

#450=EDGE_LOOP('',(#446,#447,#448,#449));

#451=FACE_OUTER_BOUND('',#450,.F.);

#452=ADVANCED_FACE('',(#451),#445,.T.);

#453=CARTESIAN_POINT('',(2.7165E0,0.E0,0.E0));

#454=DIRECTION('',(1.E0,0.E0,0.E0));

#455=DIRECTION('',(0.E0,-1.E0,0.E0));

#456=AXIS2_PLACEMENT_3D('',#453,#454,#455);

#457=PLANE('',#456);

#458=ORIENTED_EDGE('',*,*,#422,.T.);

#459=ORIENTED_EDGE('',*,*,#407,.T.);

#460=EDGE_LOOP('',(#458,#459));

#461=FACE_OUTER_BOUND('',#460,.F.);

#463=ORIENTED_EDGE('',*,*,#462,.F.);

#465=ORIENTED_EDGE('',*,*,#464,.F.);

#466=EDGE_LOOP('',(#463,#465));

#467=FACE_BOUND('',#466,.F.);

#468=ADVANCED_FACE('',(#461,#467),#457,.T.);

#469=CARTESIAN_POINT('',(3.0915E0,0.E0,0.E0));

#470=DIRECTION('',(1.E0,0.E0,0.E0));

#471=DIRECTION('',(0.E0,-1.E0,0.E0));

#472=AXIS2_PLACEMENT_3D('',#469,#470,#471);

#473=CYLINDRICAL_SURFACE('',#472,3.75E-1);

#475=ORIENTED_EDGE('',*,*,#474,.T.);

#477=ORIENTED_EDGE('',*,*,#476,.T.);

#478=ORIENTED_EDGE('',*,*,#462,.T.);

#480=ORIENTED_EDGE('',*,*,#479,.F.);

#481=EDGE_LOOP('',(#475,#477,#478,#480));

#482=FACE_OUTER_BOUND('',#481,.F.);

#483=ADVANCED_FACE('',(#482),#473,.T.);

#484=CARTESIAN_POINT('',(3.029E0,0.E0,0.E0));

#485=DIRECTION('',(1.E0,0.E0,0.E0));

#486=DIRECTION('',(0.E0,9.998721327401E-1,-1.599119038190E-2));

#487=AXIS2_PLACEMENT_3D('',#484,#485,#486);

#488=TOROIDAL_SURFACE('',#487,3.125E-1,6.25E-2);

#489=ORIENTED_EDGE('',*,*,#248,.T.);

#491=ORIENTED_EDGE('',*,*,#490,.T.);

#492=ORIENTED_EDGE('',*,*,#474,.F.);

#494=ORIENTED_EDGE('',*,*,#493,.F.);

#495=EDGE_LOOP('',(#489,#491,#492,#494));

#496=FACE_OUTER_BOUND('',#495,.F.);

#497=ADVANCED_FACE('',(#496),#488,.T.);

#498=CARTESIAN_POINT('',(3.029E0,0.E0,0.E0));

#499=DIRECTION('',(1.E0,0.E0,0.E0));

#500=DIRECTION('',(0.E0,-9.998721327401E-1,1.599119038190E-2));

#501=AXIS2_PLACEMENT_3D('',#498,#499,#500);

#502=TOROIDAL_SURFACE('',#501,3.125E-1,6.25E-2);

#503=ORIENTED_EDGE('',*,*,#246,.T.);

#504=ORIENTED_EDGE('',*,*,#493,.T.);

#506=ORIENTED_EDGE('',*,*,#505,.F.);

#507=ORIENTED_EDGE('',*,*,#490,.F.);

#508=EDGE_LOOP('',(#503,#504,#506,#507));

#509=FACE_OUTER_BOUND('',#508,.F.);

#510=ADVANCED_FACE('',(#509),#502,.T.);

#511=CARTESIAN_POINT('',(3.0915E0,0.E0,0.E0));

#512=DIRECTION('',(1.E0,0.E0,0.E0));

#513=DIRECTION('',(0.E0,-1.E0,0.E0));

#514=AXIS2_PLACEMENT_3D('',#511,#512,#513);

#515=CYLINDRICAL_SURFACE('',#514,3.75E-1);

#516=ORIENTED_EDGE('',*,*,#505,.T.);

#517=ORIENTED_EDGE('',*,*,#479,.T.);

#518=ORIENTED_EDGE('',*,*,#464,.T.);

#519=ORIENTED_EDGE('',*,*,#476,.F.);

#520=EDGE_LOOP('',(#516,#517,#518,#519));

#521=FACE_OUTER_BOUND('',#520,.F.);

#522=ADVANCED_FACE('',(#521),#515,.T.);

#523=CARTESIAN_POINT('',(3.0915E0,0.E0,0.E0));

#524=DIRECTION('',(1.E0,0.E0,0.E0));

#525=DIRECTION('',(0.E0,-1.E0,0.E0));

#526=AXIS2_PLACEMENT_3D('',#523,#524,#525);

#527=CYLINDRICAL_SURFACE('',#526,6.E-2);

#528=ORIENTED_EDGE('',*,*,#290,.T.);

#529=ORIENTED_EDGE('',*,*,#269,.F.);

#530=ORIENTED_EDGE('',*,*,#254,.F.);

#531=ORIENTED_EDGE('',*,*,#266,.T.);

#532=EDGE_LOOP('',(#528,#529,#530,#531));

#533=FACE_OUTER_BOUND('',#532,.F.);

#534=ADVANCED_FACE('',(#533),#527,.F.);

#536=CARTESIAN_POINT('',(2.7165E0,0.E0,0.E0));

#537=DIRECTION('',(1.E0,0.E0,0.E0));

#538=DIRECTION('',(0.E0,1.E0,0.E0));

#539=AXIS2_PLACEMENT_3D('',#536,#537,#538);

#541=DIRECTION('',(-1.E0,0.E0,0.E0));

#542=VECTOR('',#541,5.433E0);

#543=CARTESIAN_POINT('',(2.7165E0,-4.134E-1,0.E0));

#544=LINE('',#543,#542);

#545=CARTESIAN_POINT('',(-2.7165E0,0.E0,0.E0));

#546=DIRECTION('',(-1.E0,0.E0,0.E0));

#547=DIRECTION('',(0.E0,-1.E0,0.E0));

#548=AXIS2_PLACEMENT_3D('',#545,#546,#547);

#550=CARTESIAN_POINT('',(2.7165E0,0.E0,0.E0));

#551=DIRECTION('',(1.E0,0.E0,0.E0));

#552=DIRECTION('',(0.E0,-1.E0,0.E0));

#553=AXIS2_PLACEMENT_3D('',#550,#551,#552);

#555=DIRECTION('',(-1.E0,0.E0,0.E0));

#556=VECTOR('',#555,5.433E0);

#557=CARTESIAN_POINT('',(2.7165E0,4.134E-1,0.E0));

#558=LINE('',#557,#556);

#559=CARTESIAN_POINT('',(-2.7165E0,0.E0,0.E0));

#560=DIRECTION('',(-1.E0,0.E0,0.E0));

#561=DIRECTION('',(0.E0,1.E0,0.E0));

#562=AXIS2_PLACEMENT_3D('',#559,#560,#561);

#564=CARTESIAN_POINT('',(2.7165E0,-4.134E-1,0.E0));

#565=CARTESIAN_POINT('',(2.7165E0,4.134E-1,0.E0));

#566=VERTEX_POINT('',#564);

#567=VERTEX_POINT('',#565);

#568=CARTESIAN_POINT('',(-2.7165E0,-4.134E-1,0.E0));

#569=CARTESIAN_POINT('',(-2.7165E0,4.134E-1,0.E0));

#570=VERTEX_POINT('',#568);

#571=VERTEX_POINT('',#569);

#572=CARTESIAN_POINT('',(2.7165E0,0.E0,0.E0));

#573=DIRECTION('',(-1.E0,0.E0,0.E0));

#574=DIRECTION('',(0.E0,-1.E0,0.E0));

#575=AXIS2_PLACEMENT_3D('',#572,#573,#574);

#576=CYLINDRICAL_SURFACE('',#575,4.134E-1);

#578=ORIENTED_EDGE('',*,*,#577,.T.);

#580=ORIENTED_EDGE('',*,*,#579,.T.);

#582=ORIENTED_EDGE('',*,*,#581,.T.);

#584=ORIENTED_EDGE('',*,*,#583,.F.);

#585=EDGE_LOOP('',(#578,#580,#582,#584));

#586=FACE_OUTER_BOUND('',#585,.F.);

#587=ADVANCED_FACE('',(#586),#576,.T.);

#588=CARTESIAN_POINT('',(2.7165E0,0.E0,0.E0));

#589=DIRECTION('',(-1.E0,0.E0,0.E0));

#590=DIRECTION('',(0.E0,-1.E0,0.E0));

#591=AXIS2_PLACEMENT_3D('',#588,#589,#590);

#592=CYLINDRICAL_SURFACE('',#591,4.134E-1);

#594=ORIENTED_EDGE('',*,*,#593,.T.);

#595=ORIENTED_EDGE('',*,*,#583,.T.);

#597=ORIENTED_EDGE('',*,*,#596,.T.);

#598=ORIENTED_EDGE('',*,*,#579,.F.);

#599=EDGE_LOOP('',(#594,#595,#597,#598));

#600=FACE_OUTER_BOUND('',#599,.F.);

#601=ADVANCED_FACE('',(#600),#592,.T.);

#605=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);

#607=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#606);

#608=(CONVERSION_BASED_UNIT('INCH',#607)LENGTH_UNIT()NAMED_UNIT(#605));

#609=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);

#611=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),#610);

#612=(CONVERSION_BASED_UNIT('DEGREE',#611)NAMED_UNIT(*)PLANE_ANGLE_UNIT());

#614=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(3.9E-4),#608,'closure', 'Maximum model space distance between geometric entities at asserted connectivities');

#615=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((

#614))GLOBAL_UNIT_ASSIGNED_CONTEXT((#608,#612,#613))REPRESENTATION_CONTEXT

('ID1','3'));

#618=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));

#619=DIRECTION('',(0.E0,0.E0,1.E0));

#620=DIRECTION('',(1.E0,0.E0,0.E0));

#623=SHAPE_REPRESENTATION_RELATIONSHIP('','',#622,#616);

#624=SHAPE_REPRESENTATION_RELATIONSHIP('','',#622,#617);

#625=APPLICATION_CONTEXT(

'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');

#626=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#625);

#627=DESIGN_CONTEXT('',#625,'design');

#628=MECHANICAL_CONTEXT('',#625,'mechanical');

#629=PRODUCT('ITEM_20-TC_STUD','ITEM_20-TC_STUD','NOT SPECIFIED',(#628));

#630=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('17','LAST_VERSION',

#629,.MADE.);

#634=PRODUCT_CATEGORY('part','');

#635=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#629));

#636=PRODUCT_CATEGORY_RELATIONSHIP('','',#634,#635);

#637=SECURITY_CLASSIFICATION_LEVEL('unclassified');

#638=SECURITY_CLASSIFICATION('','',#637);

#639=CC_DESIGN_SECURITY_CLASSIFICATION(#638,(#630));

#640=APPROVAL_STATUS('approved');

#641=APPROVAL(#640,'');

#642=CC_DESIGN_APPROVAL(#641,(#638,#630,#631));

#643=CALENDAR_DATE(126,7,8);

#644=COORDINATED_UNIVERSAL_TIME_OFFSET(4,0,.BEHIND.);

#645=LOCAL_TIME(7,39,4.3E1,#644);

#646=DATE_AND_TIME(#643,#645);

#647=APPROVAL_DATE_TIME(#646,#641);

#648=DATE_TIME_ROLE('creation_date');

#649=CC_DESIGN_DATE_AND_TIME_ASSIGNMENT(#646,#648,(#631));

#650=DATE_TIME_ROLE('classification_date');

#651=CC_DESIGN_DATE_AND_TIME_ASSIGNMENT(#646,#650,(#638));

#652=PERSON('UNSPECIFIED','UNSPECIFIED',$,$,$,$);

#653=ORGANIZATION('UNSPECIFIED','UNSPECIFIED','UNSPECIFIED');

#654=PERSON_AND_ORGANIZATION(#652,#653);

#655=APPROVAL_ROLE('approver');

#656=APPROVAL_PERSON_ORGANIZATION(#654,#641,#655);

#657=PERSON_AND_ORGANIZATION_ROLE('creator');

#658=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#654,#657,(#630,#631));

#659=PERSON_AND_ORGANIZATION_ROLE('design_supplier');

#660=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#654,#659,(#630));

#661=PERSON_AND_ORGANIZATION_ROLE('classification_officer');

#662=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#654,#661,(#638));

#663=PERSON_AND_ORGANIZATION_ROLE('design_owner');

#664=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#654,#663,(#629));

#5=CIRCLE('',#4,6.E-2);

#10=CIRCLE('',#9,6.E-2);

#15=CIRCLE('',#14,3.125E-1);

#20=CIRCLE('',#19,3.125E-1);

#45=CIRCLE('',#44,6.E-2);

#50=CIRCLE('',#49,6.E-2);

#87=CIRCLE('',#86,3.985E-1);

#92=CIRCLE('',#91,3.985E-1);

#101=CIRCLE('',#100,4.715E-1);

#106=CIRCLE('',#105,4.715E-1);

#119=CIRCLE('',#118,4.715E-1);

#128=CIRCLE('',#127,4.715E-1);

#141=CIRCLE('',#140,3.75E-1);

#146=CIRCLE('',#145,3.75E-1);

#151=CIRCLE('',#150,3.985E-1);

#156=CIRCLE('',#155,3.985E-1);

#161=CIRCLE('',#160,3.75E-1);

#170=CIRCLE('',#169,6.25E-2);

#175=CIRCLE('',#174,6.25E-2);

#180=CIRCLE('',#179,3.75E-1);

#246=EDGE_CURVE('',#235,#236,#15,.T.);

#248=EDGE_CURVE('',#236,#235,#20,.T.);

#252=EDGE_CURVE('',#214,#216,#5,.T.);

#254=EDGE_CURVE('',#216,#214,#10,.T.);

#264=EDGE_CURVE('',#211,#212,#45,.T.);

#266=EDGE_CURVE('',#216,#212,#188,.T.);

#269=EDGE_CURVE('',#214,#211,#24,.T.);

#279=EDGE_CURVE('',#203,#204,#28,.T.);

#281=EDGE_CURVE('',#204,#206,#32,.T.);

#283=EDGE_CURVE('',#206,#208,#36,.T.);

#285=EDGE_CURVE('',#208,#203,#40,.T.);

#290=EDGE_CURVE('',#212,#211,#50,.T.);

#301=EDGE_CURVE('',#203,#195,#54,.T.);

#303=EDGE_CURVE('',#195,#196,#70,.T.);

#305=EDGE_CURVE('',#204,#196,#66,.T.);

#316=EDGE_CURVE('',#208,#200,#58,.T.);

#318=EDGE_CURVE('',#200,#195,#74,.T.);

#330=EDGE_CURVE('',#206,#198,#62,.T.);

#332=EDGE_CURVE('',#198,#200,#78,.T.);

#345=EDGE_CURVE('',#196,#198,#82,.T.);

#356=EDGE_CURVE('',#231,#232,#87,.T.);

#358=EDGE_CURVE('',#232,#231,#92,.T.);

#374=EDGE_CURVE('',#227,#228,#106,.T.);

#376=EDGE_CURVE('',#228,#232,#136,.T.);

#379=EDGE_CURVE('',#227,#231,#96,.T.);

#389=EDGE_CURVE('',#220,#219,#101,.T.);

#391=EDGE_CURVE('',#220,#228,#132,.T.);

#394=EDGE_CURVE('',#219,#227,#123,.T.);

#405=EDGE_CURVE('',#219,#223,#114,.T.);

#407=EDGE_CURVE('',#224,#223,#156,.T.);

#409=EDGE_CURVE('',#220,#224,#110,.T.);

#419=EDGE_CURVE('',#219,#220,#119,.T.);

#422=EDGE_CURVE('',#223,#224,#151,.T.);

#435=EDGE_CURVE('',#228,#227,#128,.T.);

#462=EDGE_CURVE('',#191,#192,#141,.T.);

#464=EDGE_CURVE('',#192,#191,#146,.T.);

#474=EDGE_CURVE('',#240,#239,#161,.T.);

#476=EDGE_CURVE('',#239,#191,#165,.T.);

#479=EDGE_CURVE('',#240,#192,#184,.T.);

#490=EDGE_CURVE('',#235,#239,#175,.T.);

#493=EDGE_CURVE('',#236,#240,#170,.T.);

#505=EDGE_CURVE('',#239,#240,#180,.T.);

#535=CLOSED_SHELL('',(#258,#273,#294,#309,#323,#337,#350,#368,#383,#398,#413,

#427,#440,#452,#468,#483,#497,#510,#522,#534));

#540=CIRCLE('',#539,4.134E-1);

#549=CIRCLE('',#548,4.134E-1);

#554=CIRCLE('',#553,4.134E-1);

#563=CIRCLE('',#562,4.134E-1);

#577=EDGE_CURVE('',#567,#566,#540,.T.);

#579=EDGE_CURVE('',#566,#570,#544,.T.);

#581=EDGE_CURVE('',#570,#571,#549,.T.);

#583=EDGE_CURVE('',#567,#571,#558,.T.);

#593=EDGE_CURVE('',#566,#567,#554,.T.);

#596=EDGE_CURVE('',#571,#570,#563,.T.);

#602=OPEN_SHELL('',(#587,#601));

#603=MANIFOLD_SOLID_BREP('',#535);

#604=SHELL_BASED_SURFACE_MODEL('',(#602));

#606=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));

#610=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));

#613=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());

#616=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#603),#615);

#617=MANIFOLD_SURFACE_SHAPE_REPRESENTATION('',(#604),#615);

#621=AXIS2_PLACEMENT_3D('',#618,#619,#620);

#622=SHAPE_REPRESENTATION('',(#621),#615);

#631=PRODUCT_DEFINITION('design','',#630,#627);

#632=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR ITEM_20-TC_STUD.',#631);

#633=SHAPE_DEFINITION_REPRESENTATION(#632,#622);

ENDSEC;

END-ISO-10303-21;