CDRL A001 Technical Report TC Studs - Signed.pdf

PDF 139 KB Posted

Attached to
Tailcone Studs
Solicitation number
N0016727Q0001
Issued by

About this file

This is a DD Form 1423, Contract Data Requirements List (CDRL), dated February 2024 and updated May 12, 2026, which specifies technical data deliverables required under a federal contract.

The form identifies a single data item requirement: a Technical Report for Study/Services related to Tailcone Studs, to be delivered to the Naval Surface Warfare Center Carderock Division (NSWCCD), Code 808. The data item is governed by the authority DI-MISC-80508B and referenced in contract sections 3.1.2 and 3.1.4. Reports shall be generated on an as-required basis at preliminary, interim, and final data stages, with all submissions distributed electronically via DoD SAFE (Secure Access File Exchange) at https://safe.apps.mil/ using encryption protocols. Deliverables must be in electronic format using Microsoft Office products or PDF with all fonts and images embedded. Distribution is limited to Department of Defense and U.S. DoD contractors only for administrative and operational use as of contract award date; if contents include controlled technical information, distribution shall follow DoDI 5230.24 procedures, or materials shall be marked "UNCLASSIFIED//FOUO." The form was prepared by Marvin Sanchez de Lozada and approved by Yara Zidan. Contract line item number, contract/purchase request number, and contractor information are marked as "TBD" (to be determined), indicating this CDRL is a template awaiting contract award details and contractor assignment.

View the file

Other files

File Type Posted
A001 DID.pdf PDF
Ref_2.1-(DISTR D)_808-T01-07-260807 - ITEM 20 - TC STUD (1).pdf PDF
CSS - N0016727Q0001 TCS.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

PREVIOUS EDITION MAY BE USED.

DD FORM 1423, FEB 2024 Page 1 of 2

(Updated 20260512)UNCLASSIFIED

UNCLASSIFIED

Show Attachment Bar

Show Hide Instructions

CONTRACT DATA REQUIREMENTS LIST

A. CONTRACT LINE ITEM NO.

TBD

B. EXHIBIT

A

C. CATEGORY:

TDP TM OTHER MISC

D. SYSTEM/ITEM

Tailcone Studs

E. CONTRACT/PR NO.

TBD

F. CONTRACTOR

TBD

1. DATA ITEM NO. 2. TITLE OF DATA ITEM

Technical Report - Study/Services

3. SUBTITLE

Technical Report

4. AUTHORITY (Data Acquisition Document No.)

DI-MISC-80508B *

5. CONTRACT REFERENCE

3.1.2 and 3.1.4

6. REQUIRING OFFICE

NSWCCD Code 808

7. DD 250 REQ

LT

8. APP CODE

N/A

9. DIST STATEMENT

REQUIRED

D

10. FREQUENCY

ASREQ*

11. AS OF DATE

N/A

12. DATE OF FIRST SUBMISSION

ASREQ*

13. DATE OF SUBSEQUENT

SUBMISSION

ASREQ*

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES

Draft Final

Reg Repro

16. REMARKS

Block 4: Under requirements/format section paragraphs (a) and (b) in regards to typewritten paper are not applicable.

Block 9: DISTRIBUTION D. Distribution authorized to Department of Defense and U.S.

DoD contractors only Administrative and/or Operational Use as of (Contract Award date).

Other request for this document shall be referred to the Advanced Propulsor Management Office, Code 808. If contents include controlled technical information, utilize DoDI

5230.24 (Distribution Statements on Technical Documents); contact the COR for assistance. Else, portion mark as "UNCLASSIFIED//FOUO".

Block 10, 12 and 13: Reports shall be generated when at preliminary data, interim data, and final data, as required by the Task Order.

Block 14: Electronically distribute information to ALL addressees via DoD SAFE (Secure Access File Exchange) at https://safe.apps.mil/ and utilize the procedures for encryption prior to uploading. Report shall be in electronic format using Microsoft Office product(s) or Portable Document Format (pdf) suitable for reproduction, with all fonts and images embedded within the document.

Add Continuation of Remarks Remove Current Page Insert Page

TA 1

15.TOTAL 0 0 0

17. PRICE GROUP

NSP

18. ESTIMATED

TOTAL PRICE

G. PREPARED BY

Marvin Sanchez de Lozada

H. SIGNATURE I. APPROVED BY

Yara Zidan

J. SIGNATURE Add Page to End

INSTRUCTIONS FOR COMPLETING DD FORM 1423

(See DoDM 5010.12 for detailed instructions.)

DD FORM 1423, FEB 2024 Page 2 of 2

(Updated 20260512)

FOR GOVERNMENT PERSONNEL

Item A. Self-explanatory.

Item B. Self-explanatory.

Item C. Mark (X) appropriate category: TDP - Technical Data Package; TM - Technical Manual; Other - other category of data, such as "Provisioning," "Configuration Management," etc.

Item D. Enter name of system/item being acquired that data will support (e.g., Mission Design Series (MDS) designator).

Item E. Self-explanatory (to be filled in after contract award).

Item F. Self-explanatory (to be filled in after contract award).

Item G. Name of preparer of CDRL.

Item H. Date CDRL was prepared and signature of preparer of CDRL.

Item I. Name of CDRL approval authority.

Item J. Date CDRL was approved and signature of CDRL approval authority.

Item 1. See DFARS Subpart 204.71 for proper numbering. To add or delete additional data items, point and click the plus or minus sign to the right of Block J.

Item 2. Enter title as it appears on data acquisition document cited in Item 4.

Item 3. Enter subtitle of data item for further definition of data item (optional entry).

Item 4. Identify only one Data Acquisition Document No. If a single work task generates more than one deliverable data product, prepare a separate data item for each deliverable data product.

Item 5. Enter reference to tasking in contract that generates requirement for the data item (e.g., Statement of Work/Performance Work Statement paragraph number).

Item 6. Enter technical office responsible for ensuring adequacy of the data item.

Item 7. Specify requirement for inspection/acceptance of the data item by the Government.

Item 8. Specify requirement for approval of a draft before preparation of the final data item.

Item 9. For technical data and computer software, specify the contractor's requirement to mark the appropriate distribution statement on the technical data or computer software (ref. DoDI 5230.24).

Item 10. Specify number of times data items are to be delivered.

Item 11. Specify as-of date of data item, when applicable.

Item 12. Specify when first submittal is required.

Item 13. Specify when subsequent submittals are required, when applicable.

Item 14. Enter addressees and number of draft/final copies to be delivered to each addressee. Explain reproducible copies in Item 16.

Item 15. Enter total number of draft/final copies to be delivered.

Item 16. Use for additional/clarifying information for Items 1 through 15.

Examples are: Tailoring of documents cited in Item 4; Clarification of submittal dates in Items 12 and 13; Explanation of reproducible copies in Item 14; Desired medium for delivery of the data item.

Identify for which data item additional remarks are provided. When tailoring the Data Acquisition Document invoked in Item 4, identify which portions of that Document are being tailored.

Identify any referenced attachments to the form. Attachments can be added using the button at the bottom of page 1.

FOR THE CONTRACTOR

Item 17. Specify appropriate price group from one of the following groups of effort in developing estimated prices for each data item listed on the DD Form 1423.

a. Group I. Definition - Data which is not otherwise essential to the contractor's performance of the primary contracted effort (production, development, testing, and administration) but which is required by DD Form 1423.

Estimated Price - Costs to be included under Group I are those applicable to preparing and assembling the data item in conformance with Government requirements, and the administration and other expenses related to reproducing and delivering such data items to the Government.

b. Group II. Definition - Data which is essential to the performance of the primary contracted effort but the contractor is required to perform additional work to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, or quality of the data item.

Estimated Price - Costs to be included under Group II are those incurred over and above the cost of the essential data item without conforming to Government requirements, and the administrative and other expenses related to reproducing and delivering such data item to the Government.

c. Group III. Definition - Data which the contractor must develop for his internal use in performance of the primary contracted effort and does not require any substantial change to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, and quality of the data item.

Estimated Price - Costs to be included under Group III are the administrative and other expenses related to reproducing and delivering such data item to the Government.

d. Group IV. Definition - Data which is developed by the contractor as part of his normal operating procedures and his effort in supplying these data to the Government is minimal.

Estimated Price - Group IV items should normally be shown on the DD Form 1423 at no cost.

Item 18. For each data item, enter an amount equal to that portion of the total price which is estimated to be attributable to the production or development for the Government of that item of data.

These estimated data prices shall be developed only from those costs which will be incurred as a direct result of the requirement to supply the data, over and above those costs which would otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any amount for rights in data. The Government’s rights to use the data shall be governed by the pertinent provisions of the contract.

PREVIOUS EDITION MAY BE USED.

DD FORM 1423, FEB 2024

Page of (Updated 20260512) Instructions

INSTRUCTIONS FOR COMPLETING DD FORM 1423

(See DoDM 5010.12 for detailed instructions.)

DD FORM 1423, FEB 2024

Page of (Updated 20260512)

CONTRACT DATA REQUIREMENTS LIST

C. CATEGORY:

14. DISTRIBUTION

14. DISTRIBUTION

a. ADDRESSEE

b. COPIES Draft Final Reg Repro

16. REMARKS

14. DISTRIBUTION

15.TOTAL

Image of arrow pointing towards totals

FOR GOVERNMENT PERSONNEL

Item A. Self-explanatory.

Item B. Self-explanatory.

Item C. Mark (X) appropriate category: TDP - Technical Data Package; TM - Technical Manual; Other - other category of data, such as "Provisioning," "Configuration Management," etc.

Item D. Enter name of system/item being acquired that data will support (e.g., Mission Design Series (MDS) designator).

Item E. Self-explanatory (to be filled in after contract award).

Item F. Self-explanatory (to be filled in after contract award).

Item G. Name of preparer of CDRL.

Item H. Date CDRL was prepared and signature of preparer of CDRL.

Item I. Name of CDRL approval authority.

Item J. Date CDRL was approved and signature of CDRL approval authority.

Item 1. See DFARS Subpart 204.71 for proper numbering. To add or delete additional data items, point and click the plus or minus sign to the right of Block J.

Item 2. Enter title as it appears on data acquisition document cited in Item 4.

Item 3. Enter subtitle of data item for further definition of data item (optional entry).

Item 4. Identify only one Data Acquisition Document No. If a single work task generates more than one deliverable data product, prepare a separate data item for each deliverable data product.

Item 5. Enter reference to tasking in contract that generates requirement for the data item (e.g., Statement of Work/Performance Work Statement paragraph number).

Item 6. Enter technical office responsible for ensuring adequacy of the data item.

Item 7. Specify requirement for inspection/acceptance of the data item by the Government.

Item 8. Specify requirement for approval of a draft before preparation of the final data item.

Item 9. For technical data and computer software, specify the contractor's requirement to mark the appropriate distribution statement on the technical data or computer software (ref. DoDI 5230.24).

Item 10. Specify number of times data items are to be delivered.

Item 11. Specify as-of date of data item, when applicable.

Item 12. Specify when first submittal is required.

Item 13. Specify when subsequent submittals are required, when applicable.

Item 14. Enter addressees and number of draft/final copies to be delivered to each addressee. Explain reproducible copies in Item 16.

Item 15. Enter total number of draft/final copies to be delivered.

Item 16. Use for additional/clarifying information for Items 1 through 15. Examples are: Tailoring of documents cited in Item 4; Clarification of submittal dates in Items 12 and 13; Explanation of reproducible copies in Item 14; Desired medium for delivery of the data item.

Identify for which data item additional remarks are provided. When tailoring the Data Acquisition Document invoked in Item 4, identify which portions of that Document are being tailored.

Identify any referenced attachments to the form. Attachments can be added using the button at the bottom of page 1.

FOR THE CONTRACTOR

Item 17. Specify appropriate price group from one of the following groups of effort in developing estimated prices for each data item listed on the DD Form 1423.

a. Group I. Definition - Data which is not otherwise essential to the contractor's performance of the primary contracted effort (production, development, testing, and administration) but which is required by DD Form 1423.

Estimated Price - Costs to be included under Group I are those applicable to preparing and assembling the data item in conformance with Government requirements, and the administration and other expenses related to reproducing and delivering such data items to the Government.

b. Group II. Definition - Data which is essential to the performance of the primary contracted effort but the contractor is required to perform additional work to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, or quality of the data item.

Estimated Price - Costs to be included under Group II are those incurred over and above the cost of the essential data item without conforming to Government requirements, and the administrative and other expenses related to reproducing and delivering such data item to the Government.

c. Group III. Definition - Data which the contractor must develop for his internal use in performance of the primary contracted effort and does not require any substantial change to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, and quality of the data item.

Estimated Price - Costs to be included under Group III are the administrative and other expenses related to reproducing and delivering such data item to the Government.

d. Group IV. Definition - Data which is developed by the contractor as part of his normal operating procedures and his effort in supplying these data to the Government is minimal.

Estimated Price - Group IV items should normally be shown on the DD Form 1423 at no cost.

Item 18. For each data item, enter an amount equal to that portion of the total price which is estimated to be attributable to the production or development for the Government of that item of data.

These estimated data prices shall be developed only from those costs which will be incurred as a direct result of the requirement to supply the data, over and above those costs which would otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any amount for rights in data. The Government’s rights to use the data shall be governed by the pertinent provisions of the contract.

9.0.0.2.20120627.2.874785 DD Form 1423, "Contract Data Requirements List"

CurrentPage:
PageCount:
Select Classification from drop-down list.: 1
CUI Indicator Information:
Click on this button to attach a file(s).:
show:
hide:
A. CONTRACT LINE ITEM NUMBER: TBD
exhibit: A
C. CATEGORY: Select for "TDP.": 0
C. CATEGORY: Select for "TM.": 0
C. CATEGORY: Select for "OTHER.": 1
C. CATEGORY: Enter specification for "Other.": MISC
System: Tailcone Studs
ContractNum: TBD
Contractor: TBD
1. DATA ITEM NUMBER:
titleDataItem: Technical Report - Study/Services
subtitle: Technical Report
4. AUTHORITY (Data Acquisition Document Number): DI-MISC-80508B *
contractRef: 3.1.2 and 3.1.4
reqOffice: NSWCCD Code 808
7. DD 250 REQUIREMENT: LT
8. APPROVAL CODE : N/A
9. DISTRIBUTION STATEMENT REQUIRED: D
freq: ASREQ*
asOfDate: N/A
dateFirstSub: ASREQ*
dateSubseqSub: ASREQ*
16. REMARKS: Block 4: Under requirements/format section paragraphs (a) and (b) in regards to typewritten

paper are not applicable.

Block 9: DISTRIBUTION D. Distribution authorized to Department of Defense and U.S.

DoD contractors only Administrative and/or Operational Use as of (Contract Award date).

Other request for this document shall be referred to the Advanced Propulsor Management Office, Code 808. If contents include controlled technical information, utilize DoDI

5230.24 (Distribution Statements on Technical Documents); contact the COR for assistance. Else, portion mark as "UNCLASSIFIED//FOUO".

Block 10, 12 and 13: Reports shall be generated when at preliminary data, interim data, and final data, as required by the Task Order.

Block 14: Electronically distribute information to ALL addressees via DoD SAFE (Secure Access File Exchange) at https://safe.apps.mil/ and utilize the procedures for encryption prior to uploading. Report shall be in electronic format using Microsoft Office product(s) or Portable Document Format (pdf) suitable for reproduction, with all fonts and images embedded within the document.

Click to add/remove continuation field for Remarks:
Click to delete CURRENT data items for 1 through 18, unless this is the only data item.:
Click to add a page of data items for 1 through 18 immediately following the current page.:
14. DISTRIBUTION - a. ADDRESSEE, new line: TA
15.TOTAL - Total draft copies is automatically calculated.: 0
15.TOTAL - Total final regular copies is automatically calculated.: 1
15.TOTAL - Total final regular copies is automatically calculated.: 0
15.TOTAL - Total final reproducible copies is automatically calculated.: 0
priceGrp: NSP
estTotalPrice:
remarks_cont:
preparedBy: Marvin Sanchez de Lozada
H. SIGNATURE: H. SIGNATURE
H. SIGNATURE:
approvedBy: Yara Zidan
J. SIGNATURE: J. SIGNATURE
J. SIGNATURE:
Click to add additional data items 1 through 18 to the end of the form.:

File details come from the government source that posted it. Updated .