N0016726Q1152 CSS.pdf

This is a combined synopsis/solicitation for commercial items prepared in accordance with Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice. Naval Surface Warfare Center Carderock Division (NSWCCD) intends to award a firm fixed price (FFP) purchase order using Simplified Acquisition Procedures. The Government intends to solicit for Franklin Miller QS2420 Quad Shaft Shredder as detailed in the attached solicitation. This announcement constitutes the only solicitation and a written solicitation will not be issued.

Quotes are being requested under Request for Quotation (RFQ) N0016726Q1152

This is procurement IS set aside for small business. The NAICS code is 333998 and the Small Business Standard is 700 employees.

The provisions and clauses included and/or incorporated in this solicitation document are those in effect through the Federal Acquisition Circular. This RFQ incorporates all provisions and clauses in effect through Federal Acquisition Circular FAC 2026-01 and the Defense Federal Acquisition Regulation Supplement (DFARS) DPN 20260702. SEE ATTACHED SOLICITATION FOR CLAUSES AND PROVISIONS.

The Government intends to award a Firm Fixed Price (FFP) contract resulting from this solicitation to the responsible quoter whose quote, conforming to the solicitation that will be most advantageous to the Government, price and other factors considered. The Government intends to evaluate all timely quotes received from eligible quoters on a lowest price technically acceptable (LPTA) basis. The Government intends to evaluate quotations and award a contract without discussions with quoters. The Government reserves the right to conduct discussions if the Contracting Officer later determines them to be necessary.

Evaluation Factors (See 52.212-2- Evaluation—Commercial Products and Commercial Services)

Questions/clarification regarding this solicitation must be submitted via email to tracy.l.mcdonough2.civ@us.navy.mil by 10:00 AM EDT on Monday, 24 August 2026. All questions received before this deadline will be answered in an amendment to the solicitation.

Quote packages are due on or before 10:00 AM EDT on Wednesday, 26 August 2026. Responses shall include Official Company Name, Cage Code, and Point of Contact name & phone number. Each response must clearly indicate the capability of the quoter to meet all specifications and requirements.

The Point of Contact for this acquisition is Tracy McDonough tracy.l.mcdonough2.civ@us.navy.mil

Section A - Solicitation/Contract Form

Franklin Miller QS2420 Quad Shaft Shredder

N0016726Q1152

Section B - Supplies or Services & Prices or Costs

Additional Information/Notes

Item Supplies/Service Quantity Unit Unit Price Amount

Franklin Miller QS2420 Quad Shaft Shredder meeting the specifications identified in the required specifications.

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item.

The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

Manufacturer's Name: Franklin Miller Pricing Arrangement: Firm Fixed Price

1 Each

Option Line Item

OPTION: Additional sizing screens in accordance with the Requirement Specifications Sizing screen with 3/4" openings Sizing screen with 1 1/4" openings

Manufacturer's Name: Franklin Miller Pricing Arrangement: Firm Fixed Price

1 Each

Option Line Item

OPTION: Shredder spare parts package in accordance with the Requirement Specifications Cutters Bearings Wear items typically provided as part of spare parts package

Manufacturer's Name: Franklin Miller Pricing Arrangement: Firm Fixed Price

1 Each

Section C - Description/Specifications/Statement of Work

REQUIREMENT SPECIFICATIONS

Franklin Miller Quad-shaft shredder

1.0 Description/Background:

The NSWCCD's Code 633 performs research and development in the area of shipboard environmental quality systems and provides engineering and technical support to NAVSEA technical warrant holders, various program offices, and other Department of Defense (DoD) organizations. Changes to the Navy's handling of solid waste discharge and new restrictions have greatly impacted the types of solid waste processing systems being researched, tested and installed on Navy ships. As part of Solid Waste Processor pierside testing conducted in Q4FY25, the Navy processed shipboard solid waste, with the exception of food waste, for a six-week period. During this time, the testing team determined that the current Navy solid waste shredder (SWS) inadequately shredded the types of waste that will now need to be shredded/stored in accordance with new solid waste regulations.

2.0 Objective:

The objective of this contract is to procure one (1) Franklin Miller QS2420 Quad Shaft Shredder which meets the minimum specifications below.

3.0 Minimum Specifications:

Performance Specifications:

- Capable of shredding the following types of plastic: styrofoam, polystyrene utensils, stretch film, milk jugs, soda/water bottles

- Capable of shredding the following additional waste: paper, cardboard, textiles, wood, and steel cans, nitrile gloves and paracord rope

- Capable of handling (without system failure) "challenge components" such as: thick cardboard, full ream of paper, wood pallet, broom handle, garden hose, ethernet cables, steel toe boots, zip ties, coveralls, five-gallon plastic bucket, disposable batteries, thick rope, and filled water bottles

- Yields a compaction ratio (unprocessed volume to processed volume) of 5:1 or better.

- Yields an average particle size of 1 in3 or better.

- Minimum average processing rate of 250 lbs/hour

- Include automatic reversing capability

Physical specifications:

- Maximum cutting chamber size of 24" x 20"

- 30 HP motors or equivalent (e.g., two 15 HP motors)

- Support frame designed to accommodate a plastic collection bin, 21"x16"x15" (LxWxH)

- Internal shredder components should be made from a hardened material capable of withstanding the harsh environment and heavy use conditions created by a highly variable input waste stream.

- Include sizing screen that limits the shred particle size; 1" openings.

4.0 Options: These are additional items that may be required and purchased up to one year from date of award if the Government determines that there is a need.

4.1 Option 1: Additional sizing screens

- Sizing screen with 3/4" openings

- Sizing screen with 1 1/4" openings

4.2 Option 2: Shredder spare parts package

- Cutters

- Bearings

- Wear items typically provided as part of spare parts package

5.0 Deliverables:

In addition to delivery of the Quad-shaft shredder that meets the minimum specification requirements outlined above, the following deliverables should be provided:

CDRL No. Description Task Area

A001 Drawing package that includes support frame 3.0

A002 Shredder Technical Manual 3.0

6.0 Performance and Delivery:

The contractor shall provide government approved drawings of the support frame/stand no later than 3 weeks following contract award.

The contractor shall deliver the shredder no later than 24 weeks following receipt of approved engineering submittals. The shredder lead time to delivery should be no greater than 24 weeks.

The contractor shall arrange for shipment to the below address:FOB Destination

Naval Surface Warfare Center, Carderock Division

ATTN: Shipping/Receiving (Bldg. 143)

9500 MacArthur Blvd

West Bethesda, MD 20817

Requirements Franklin Miller QS2420 Quad Shaft Shredder

Additional Regulation or Supplemental Clauses Incorporated by Full Text

C-204-H001 USE OF NAVY SUPPORT CONTRACTORS FOR OFFICIAL CONTRACT FILES (Oct 2018)

(a) NAVSEA may use a file room management support contractor, hereinafter referred to as "the support contractor", to manage its file room, in which all official contract files, including the official file supporting this procurement, are retained. These official files may contain information that is considered a trade secret, proprietary, business sensitive or otherwise protected pursuant to law or regulation, hereinafter referred to as "protected information". File room management services consist of any of the following: secretarial or clerical support; data entry; document reproduction, scanning, imaging, or destruction; operation, management, or maintenance of paper-based or electronic mail rooms, file rooms, or libraries; and supervision in connection with functions listed herein.

(b) The cognizant Contracting Officer will ensure that any NAVSEA contract under which these file room management services are acquired will contain a requirement that:

(1) The support contractor not disclose any information;

(2) Individual employees are to be instructed by the support contractor regarding the sensitivity of the official contract files;

(3) The support contractor performing these services be barred from providing any other supplies and/or services, or competing to do so, to NAVSEA for the period of performance of its contract and for an additional three years thereafter unless otherwise provided by law or regulation; and,

(4) In addition to any other rights the contractor may have, it is a third party beneficiary who has the right of direct action against the support contractor, or any person to whom the support contractor has released or disclosed protected information, for the unauthorized duplication, release, or disclosure of such protected information.

(c) Execution of this contract by the contractor is considered consent to NAVSEA's permitting access to any information, irrespective of restrictive markings or the nature of the information submitted, by its file room management support contractor for the limited purpose of executing its file room support contract responsibilities.

(d) NAVSEA may, without further notice, enter into contracts with other contractors for these services. Contractors should enter into separate non-disclosure agreements with the file room contractor. Contact the Procuring Contracting Officer for contractor specifics. However, any such agreement will not be considered a prerequisite before information submitted is stored in the file room or otherwise encumber the government.

(End of Text)

C-211-H018 APPROVAL BY THE GOVERNMENT (NAVSEA) (JAN 2019) (Jan 2019)

Approval by the Government as required under this contract and applicable specifications shall not relieve the Contractor of its obligation to comply with the specifications and with all other requirements of the contract, nor shall it impose upon the Government any liability it would not have had in the absence of such approval.

(End of Text)

Section D - Packaging and Marking

Section E - Inspection and Acceptance

Overall Contract Inspection/Acceptance Locations

Inspection and Acceptance Location

Both Destination Instructions: Contact the TPOC upon delivery for inspection and acceptance.

DoDAAC: N00167 CountryCode: USA

NSWC CARDEROCK

CARDEROCK DIVISION, 9500 MACARTHUR BOULEVARD

BETHESDA, MD 20817-5700

UNITED STATES

TBD, TPOC

Email: TBD Telephone: TBD

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: Contact the TPOC upon delivery for inspection and acceptance.

DoDAAC: N00167 CountryCode: USA

NSWC CARDEROCK

CARDEROCK DIVISION, 9500 MACARTHUR BOULEVARD

BETHESDA, MD 20817-5700

UNITED STATES

TBD, TPOC

Email: TBD Telephone: TBD

Option Line Item

Inspection and Acceptance Location

Both Destination Instructions: Contact the TPOC upon delivery for inspection and acceptance.

DoDAAC: N00167 CountryCode: USA

NSWC CARDEROCK

CARDEROCK DIVISION, 9500 MACARTHUR BOULEVARD

BETHESDA, MD 20817-5700

UNITED STATES

TBD, TPOC

Email: TBD Telephone: TBD

Section F - Deliveries or Performance

Overall Contract Delivery Period

Contractor Destination

Line Item Delivery Schedule Quantity Address and POC Special Handling/Notes

Delivery Requested By Delivery Date 01 Feb 2027

1 Each Ship To DoDAAC: N00167 CountryCode: USA

NSWC CARDEROCK

CARDEROCK DIVISION BLDG 143, 9500

MACARTHUR BOULEVARD

BETHESDA, MD 20817-5700

UNITED STATES

TBD, TPOC

Email: TBD Telephone: TBD

FoB Details Contractor Destination

Option Line Item

1 Each FoB Details Contractor Destination

Option Line Item

1 Each FoB Details Contractor Destination

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.247-34 F.o.b. Destination. Jan 1991

Additional Regulation or Supplemental Clauses Incorporated by Full Text

F-247-W001 NSWCCD DELIVERY AND OVERWEIGHT VEHICLE GUIDELINES (NAVSEA)

(OCT 2018)

(Oct 2018)

F-247-W001 ADDENDUM

F-247-W001 NSWCCD DELIVERY AND OVERWEIGHT VEHICLE GUIDELINES (NAVSEA) (OCT 2018): In the event the MacArthur Boulevard gate is closed, the contractor shall use the main gate on Clara Barton Parkway. For more information, please call (301)227-4060/4062/4330 or 1-877-679-2231

The following is provided for informational purposes only:

US NAVY GBLOC BBNV

Unit ID Code/DoDAAC: N00167

Naval Surface Warfare Center

9500 MacArthur Blvd, Bldg. 143

W. Bethesda, MD 20817

Receiving Hours:

0600-1400 MON thru THURS

0600-1330 FRI

Directions:

River Rd Exit off the I-495 Capital beltway. (Rte. 190W, exit 39W).

Turn Left only Bradley Blvd. (Rte. 191) (Traffic signal controlled intersection). Proceed 0.5 miles.

Turn Left onto Persimmon Tree Road (4 way stop). Proceed 1.4 miles.

Turn Right onto Eggert Road. Proceed 0.7 miles and cross over MacArthur Blvd to the CD NSWC Gate 3 entrance (Truck Gate).

Note: Once on Eggert Road, head straight into the back gate. You will cross over MacArthur Blvd.

Once in gate, turn right, and drive straight until you see bldg. 143 on left. Look for blue sign on your left for bldg. 143 or the loading dock.

"All drivers must either have a NCAC or Defense Biometric Identification System (DBIDS) card in addition they must have proof of US citizenship with them (birth certificate or US passport or state enhanced driver's license [only issued by WA, NY, VT, & MI])." OVERSIZED CALL 24 HRS IN ADVANCE, (301) 227-4060

/4062/4330 OR DSN 287-4060/4062/4330. NO ANIMALS ALLOWED ON BASE.

MUST BE CLEARED BY SECURITY PERSONNEL AT COMMERCIAL GATE. 301-227-1551 PRESENT

BILL OF LADING TO SECURITY OFFICERS AND CREDENTIALS.

Call 1-877-679-2231 for Base status if needed to check for inclement weather or other unannounced or unscheduled closings.

MACARTHUR BOULEVARD - OVERWEIGHT VEHICLE GUIDELINES

1. Roadway has a posted load (weight) restriction of 6 tons GVW.

2. Washington Aqueduct (WA) makes exceptions up to approximately 15 tons GVW for special conditions. (School buses, garbage trucks, fire trucks, construction work and special deliveries).

3. Two methods of approval:

a. Verbal (short duration access)

b. Permit (daily/weekly/monthly business)

4. Verbal Method:

a. Applicants calls WA

b. WA requests location of delivery, day of delivery, and GVW of vehicle.

c. WA makes approval or disapproval decisions based on weight of vehicle, location of delivery and conduit condition in that area.

d. If approved by WA, the Montgomery County Police are called and given notice of approval (301-652- 9200).

The following information is given to the Police:

a. Name of delivery company

b. Address of delivery

c. Date of delivery

The police record the information in a log book at the Bethesda Police Station. If the applicant is stopped by the police on MacArthur Boulevard, he should tell the police officer that he has been approved and the police officer should call the police station to verify the approval. If there is no record at the police station the truck driver will get a ticket and be fined.

5. Permit Method:

a. Applicant calls Montgomery County Department of Public Works and Transportation, Division of Traffic and Parking Services at 301-217-2190 for permit application.

b. Applicant completes permit application and sends it back to Montgomery County.

c. Montgomery County sends application to WA for approval or rejection.

d. WA reviews application and approved or rejects it based on GVW criteria and purpose of request.

e. WA sends application back to County. If approved Montgomery County will issue a bumper sticker permit and if disapproved County sends letter of rejection.

6. No concrete trucks are allowed on MacArthur Boulevard due to excessive weight. Trucks normally weigh 30 to 40 tons loaded. Concrete trucks can be driven to a street intersection at MacArthur Boulevard and concrete can be pumped or transported by a front end loader to the specified building site.

7. No ten wheel trucks are allowed on MacArthur Boulevard due to excessive weight. Single axle trucks are permitted if GVW is less than 15 tons.

8. Overweight trucks can cross MacArthur at locations of heavy duty crossings.

HEAVY DUTY (AND MEDIUM DUTY) CROSSINGS ON MACARTHUR BOULEVARD

1. Anglers Inn 12" reinforced concrete slab supported by W 12x79 beams, 4' c.c. and bridging "New Conduit" only. Three-foot-thick concrete wall extending down to floor slab of conduit supports W 12x79. Old conduit has 12" concrete slab on grade over it.

2. Brickyard Road 12" reinforced concrete slab supported by W 12X79 beams, 4' c.c., supported by 3' thick concrete walls outside and 4' thick intermediate wall.

3. Palisades (Medium Duty) 10" concrete slab (no supports) with #4 @ 12" both ways. Drive in and out on North side of MacArthur Blvd. from Eggert Drive.

4. Eggert Drive (Navy Haul Road) Consist of 2'-8" and 2'-1" thick concrete slabs over new and old conduits. Slab reinforced with 1" square bars at 4" and 41/2" respectively.

5. PersimmonTree Road Same as Brickyard Road.

6. 77th Street Same as Brickyard Road (supported on deep caissons instead of walls)

7. Oxford Road Same as Brickyard Road

8. Goldsboro Road (Medium Duty) 10" concrete slab (no supports) over conduits around x-conn #3 and South East to Glen Echo parking lot with #4 @ 12" both ways (one layer)

9. Brookmont Vehicles must use special heavy duty ramp from Boulevard to Brookmont.

(End of Text)

Section G - Contract Administration Data

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. Dec 2018

DFARS Clauses Incorporated by Full Text

252.232-7006 Wide Area WorkFlow Payment Instructions. (Tailored) (Jan 2023)

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

(a) As used in this clause- Definitions.

"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.

"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.

"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as Electronic invoicing.

authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) To access WAWF, the Contractor shall- WAWF access.

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice WAWF training.

Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/

(e) Document submissions may be via web entry, Electronic Data Interchange, or File Transfer WAWF methods of document submission.

Protocol.

(f) The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF payment instructions.

WAWF for this contract or task or delivery order:

(1) The Contractor shall submit payment requests using the following document type(s): Document type.

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items-

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

Invoice and Receiving Report (COMBO) Destination/Destination (D/D)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

Invoice and Receiving Report (COMBO) Destination/Destination (D/D)

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial financing, submit a commercial financing request.

(2) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

(3) The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF Document routing.

when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC N62825

Issue By DoDAAC N00167

Admin DoDAAC N00167

Inspect By DoDAAC N00167

Ship To Code N00167

Ship From Code ____

Mark For Code ____

Service Approver (DoDAAC) ____

Service Acceptor (DoDAAC) ____

Accept at Other DoDAAC ____

LPO DoDAAC ____

DCAA Auditor DoDAAC ____

Other DoDAAC(s) ____

(4) The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in Payment request.

accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F. Receiving report.

(g) WAWF points of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

Ademola Oriowo at 301-503-0809 or by email ademola.m.oriowo.civ@us.navy.mil

Or the NAVSEA Helpdesk at WAWFHQ@navy.mil

You may also contact the below SAP Coordinator:

Sheila Riggs sheila.b.riggs.civ@us.navy.mil

(2) , if assistance is needed. Contact the WAWF helpdesk at 866-618-5988

(End of clause)

Additional Regulation or Supplemental Clauses Incorporated by Full Text

G-232-H002 H002 PAYMENT INSTRUCTIONS (NAVSEA) (FEB 2024) (Feb 2024)

Payment office allocation methods can be found in the table at DFARS PGI 204.7108(b)(2) (https://www.acq.osd.mil/dpap /dars/pgi/pgi_htm/current/PGI204_71.htm#payment_instructions).

(End of text)

G-232-H005 SUPPLEMENTAL INSTRUCTIONS REGARDING INVOICING (NAVSEA) (JAN

2019)

(Jan 2019)

(a) For other than firm fixed priced contract line item numbers (CLINs), the Contractor agrees to segregate costs incurred under this contract/task order (TO), as applicable, at the lowest level of performance, either at the sub line item number (SLIN) or CLIN level, rather than at the total contract/TO level, and to submit invoices reflecting costs incurred at that level. Supporting documentation in Wide Area Workflow (WAWF) for invoices shall include summaries of work charged during the period covered as well as overall cumulative summaries by individual labor categories, rates, and hours (both straight time and overtime) invoiced; as well as, a cost break down of other direct costs (ODCs), materials, and travel, by technical instruction (TI), SLIN, or CLIN level. For other than firm fixed price subcontracts, subcontractors are also required to provide labor categories, rates, and hours (both straight time and overtime) invoiced; as well as, a cost breakdown of ODCs, materials, and travel invoiced. Supporting documentation may be encrypted before submission to the prime contractor for WAWF invoice submittal. Subcontractors may email encryption code information directly to the Contracting Officer and Contracting Officer Representative (COR). Shouldthe subcontractor lack encryption capability, the subcontractor may also email detailed supporting cost information directly to the Contracting Officer and COR; or other method as agreed to by the Contracting Officer.

N0016726Q1152 mailto:ademola.m.oriowo.civ@us.navy.mil mailto:WAWFHQ@navy.mil

(b) Contractors submitting payment requests and receiving reports to WAWF using either Electronic Data Interchange (EDI) or Secure File Transfer Protocol (SFTP) shall separately send an email notification to the COR and Contracting Officer on the same date they submit the invoice in WAWF. No payments shall be due if the contractor does not provide the COR and Contracting Officer email notification as required herein.

(End of Text)

G-242-W001 CONTRACT ADMINISTRATION FUNCTIONS (NAVSEA) (OCT 2018) (Oct 2018)

(a) In accordance with FAR 42.302(a) all functions listed are delegated to the ACO except the following items to be retained by the PCO:

N/A

(b) In accordance with FAR 42.302(b), the following additional functions are delegated to the ACO:

N/A

(End of Text)

G-242-H002 HOURS OF OPERATION AND HOLIDAY SCHEDULE (NAVSEA) (JUL 2021) (Jul 2021)

(a) The policy of this activity is to schedule periods of reduced operations or shutdown during holiday periods. Deliveries will not be accepted on Saturdays, Sundays or Holidays except as specifically requested by the Technical Point of Contact. All goods or services attempted to be delivered on a Saturday, Sunday or Holiday without specific instructions from the Contracting Officer or his duly appointed representative will be returned to the contractor at the contractor’s expense with no cost or liability to the U.S. Government.

(b) The federal Government observes public Holidays that have been established under 5 U.S.C. 6103. The actual date of observance for each of the holidays, for a specific calendar year, may be obtained from the OPM website at OPM.GOV or by using the following direct link: https://www.opm.gov/policy-data-oversight/pay-leave/federal-holidays/.

(c) Delayed Opening, Early Dismissal and Closure of Government Facilities. When a Government facility has a delayed opening, is closed or Federal employees are dismissed early (due to severe weather, security threat, security exercise, or a facility related problem) that prevents personnel from working, onsite contractor personnel regularly assigned to work at that facility shall follow the same reporting and/or departure directions given to Government personnel. The contractor shall not direct charge to the contract for such time off, but shall follow parent company policies regarding taking leave (administrative or other). Non-essential contractor personnel, who are not required to remain at or report to the facility, shall follow their parent company policy regarding whether they should go/stay home or report to another company facility. Subsequent to an early dismissal, delayed opening, or during periods of inclement weather, onsite contractors should monitor the OPM website as well as radio and television announcements before departing for work to determine if the facility is closed or operating on a delayed arrival basis.

(d) When Federal employees are excused from work due to a holiday or a special event (that is unrelated to severe weather, a security threat, or a facility related problem), on site contractors shall continue working established work hours or take leave in accordance with parent company policy. Those contractor employees who take leave shall not direct charge the non-working hours to the contract. Contractors are responsible for predetermining and disclosing their charging practices for early dismissal, delayed openings, or closings in accordance with the FAR, applicable cost accounting standards, and the company's established policy and procedures. Contractors shall follow their disclosed charging practices during the contract period of performance, and shall not follow any verbal directions to the contrary. The Contracting Officer will make the determination of cost allowability for time lost due to facility closure in accordance with FAR, applicable Cost Accounting Standards, and the Contractor's established accounting policy and procedures.

(e) If you intend to visit the Contracts Office, it is advised that you call for an appointment at least 24 hours in advance.

(f) The hours of operation are as follows:

AREA FROM TO

West Bethesda, MD 0800 1400

(g) All deliveries to the Receiving Officer or Technical Point of Contact to the , shall be made Monday through address as identified in Box 15 Friday from to , local time. Deliveries will not be accepted after . No deliveries will be accepted on federal government holidays.0800 1400 1400

N0016726Q1152 https://www.opm.gov/policy-data-oversight/pay-leave/federal-holidays/ https://www.opm.gov/policy-data-oversight/pay-leave/federal-holidays

(End of Text)

G-242-H001 - GOVERNMENT CONTRACTADMINISTRATION POINTS-OF-CONTACT AND

RESPONSIBILITIES (NAVSEA) (OCT 2023)

(Oct 2023)

(a) The Government reserves the right to administratively substitute any of the points of contact listed below at any time.

(b) The contracting officer is the only person authorized to change this contract or orders issued thereunder. The Contractor shall not comply with any order, direction or request of Government personnel - that would constitute a change - unless it is issued in writing and signed by the Contracting Officer or is pursuant to specific authority otherwise included as part of this contract. If, in the opinion of the contractor, an effort outside the existing scope of this contract is requested, the contractor shall promptly comply with the Notification of Changes clause of this contract.

(c) The points of contact are as follows:

The Procuring Contracting Officer (PCO) is:

Name: Kristen Duhaime

Address: 904 Corporate Lane, Chesapeake, VA 23220

Phone: (301) 219-7629

E-mail: kristen.m.duhaime.civ@us.navy.mil

The Contract Specialist is:

Name: Tracy McDonough Phone: (757) 288-6854 E-mail: tracy.l.mcdonough2.civ@us.navy.mil

(d) The Technical Point of Contact (TPOC) is the contracting officer's representative for technical matters when a COR is not appointed. The TPOC is responsible for technical issues of contract administration, such as providing all items of Government Furnished Information (GFI), Government Furnished Material (GFM) and Government Furnished Equipment (GFE) if specified in the contract as well as the inspection and acceptance of all contract deliverables.

The Technical Point of Contact (TPOC) is:

To be identified at contract award

(End of Text)

N0016726Q1152 mailto:kristen.m.duhaime.civ@us.navy.mil mailto:tracy.l.mcdonough2.civ@us.navy.mil

Section H - Special Contract Requirements

Section I - Contract Clauses

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements. Jan 2017 52.204-13 System for Award Management-Maintenance. (Deviation 2026-O0038) Feb 2026

52.209-6 Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded. (Deviation 2026-O0038)

Feb 2026

52.209-10 Prohibition on Contracting With Inverted Domestic Corporations. (Deviation 2026- O0038)

Feb 2026

52.212-4 Terms and Conditions-Commercial Products and Commercial Services. (Deviation 2026- O0038)

Feb 2026

52.219-6 Notice of Total Small Business Set-Aside. (Deviation 2026-O0038) Feb 2026 52.222-3 Convict Labor. (Deviation 2026-O0038) Feb 2026 52.222-19 Child Labor-Cooperation with Authorities and Remedies. (Deviation 2026-O0038) Mar 2026 52.222-36 Equal Opportunity for Workers with Disabilities. (Deviation 2026-O0038) Feb 2026 52.222-50 Combating Trafficking in Persons. (Deviation 2026-O0038) Feb 2026 52.222-54 Employment Eligibility Verification. (Deviation 2026-O0038) Feb 2026

52.222-90 Addressing DEI Discrimination by Federal Contractors. (Deviation 2026-O0040, Revision 1)

Apr 2026

52.223-23 Sustainable Products. (Deviation 2026-O0038) Feb 2026 52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving. May 2024 52.232-33 Payment by Electronic Funds Transfer-System for Award Management. Oct 2018 52.232-39 Unenforceability of Unauthorized Obligations. Jun 2013 52.232-40 Providing Accelerated Payments to Small Business Subcontractors. Mar 2023 52.233-3 Protest after Award. (Deviation 2026-O0038) Feb 2026 52.233-4 Applicable Law for Breach of Contract Claim. (Deviation 2026-O0038) Feb 2026 52.240-91 Security Prohibitions and Exclusions. (Deviation 2026-O0038) Feb 2026

52.244-6 Subcontracts for Commercial Products and Commercial Services. (Deviation 2026- O0038)

Apr 2026

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

252.203-7000 Requirements Relating to Compensation of Former DoD Officials. Sep 2011 252.203-7002 Requirement to Inform Employees of Whistleblower Rights. Dec 2022

252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting

(DEVIATION 2026-O0025)

May 2024 Deviation 2026-O0025 Jun 2026

252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support. Jan 2023

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.

Jan 2023

252.204-7022 Expediting Contract Closeout. May 2021 252.211-7008 Use of Government-Assigned Serial Numbers. Sep 2010 252.223-7008 Prohibition of Hexavalent Chromium. Jan 2023 252.225-7012 Preference for Certain Domestic Commodities. Apr 2022 252.225-7048 Export-Controlled Items. Jun 2013 252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime. Jan 2023

252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region.

Jun 2023

252.225-7972 Prohibition on the Procurement of Foreign-Made Unmanned Aircraft Systems. (DEVIATION 2024-O0014)

Aug 2024 Deviation 2024-O0014 Aug 2024

252.232-7010 Levies on Contract Payments. Dec 2006 252.237-7010 Prohibition on Interrogation of Detainees by Contractor Personnel. Jan 2023

252.240-7997 NIST SP 800-171 DoD Assessment Requirements. (DEVIATION 2026- O0025)

Feb 2026 Deviation 2026-O0025 Feb 2026

252.244-7999 Subcontracts for Commercial Products or Commercial Services.

(DEVIATION 2026-O0015)

Feb 2026 Deviation 2026-O0015 Jan 2026

252.246-7008 Sources of Electronic Parts. Jan 2023 252.247-7023 Transportation of Supplies by Sea. Oct 2024

FAR Clauses Incorporated by Full Text

52.217-9 Option to Extend the Term of the Contract. (Tailored) (Mar 2000)

Option to Extend the Term of the Contract (Mar 2000)

(a) The Government may extend the term of this contract by written notice to the Contractor within ; provided that the Government gives the 3 Days Contractor a preliminary written notice of its intent to extend at least . The preliminary notice at least 10 days before the contract expires does not commit the Government to an extension.

(b) If the Government exercises this option, the extended contract shall be considered to include this option clause.

(c) The total duration of this contract, including the exercise of any options under this clause, shall not exceed .2 years

(End of clause)

52.219-28 Postaward Small Business Program Rerepresentation. (Deviation 2026-O0038) (Feb 2026)

POSTAWARD SMALL BUSINESS PROGRAM REREPRESENTATION (FEB 2026) (DEVIATION 2026-O0038)

(a) . As used in this clause-Definitions

Long-term contract means a contract of more than five years in duration, including options. However, the term does not include contracts that exceed five years in duration because the period of performance has been extended for a cumulative period not to exceed six months under the clause at 52.217-8, Option to Extend Services, or other appropriate authority.

Small business concern-

(1) Means a concern, including its affiliates, that is independently owned and operated, not dominant in its field of operation, and qualified as a small business under the criteria in 13 CFR part 121 and the size standard in paragraph (c) of this clause.

(2) , as used in this definition, means business concerns, one of whom directly or indirectly controls or has the power to control the others, Affiliates or a third party or parties control or have the power to control the others. In determining whether affiliation exists, consideration is given to all appropriate factors including common ownership, common management, and contractual relationships. SBA determines affiliation based on the factors set forth at 13 CFR 121.103.

(b) If the Contractor represented that it was a small business concern, a small disadvantaged business concern, or a joint venture that was any of the small business concerns identified in 19.000(a)(3) prior to award of this contract, the Contractor shall rerepresent its size and socioeconomic status according to paragraph (e) of this clause or, if applicable, paragraph (g) of this clause, upon occurrence of any of the following:

(1) Within 30 days after execution of a novation agreement or within 30 days after modification of the contract to include this clause, if the novation agreement was executed prior to inclusion of this clause in the contract.

(2) Within 30 days after a merger or acquisition that does not require a novation or within 30 days after modification of the contract to include this clause, if the merger or acquisition occurred prior to inclusion of this clause in the contract.

(3) For long-term contracts-

(i) Within 60 to 120 days prior to the end of the fifth year of the contract; and

(ii) Within 60 to 120 days prior to the date specified in the contract for exercising any option thereafter.

(c) The Contractor shall rerepresent its size status in accordance with the size standard in effect at the time of this rerepresentation that corresponds to the North American Industry Classification System (NAICS) code(s) assigned to this contract. The small business size standard corresponding to this NAICS code(s) can be found at https://www.sba.gov/document/support--table-size-standards.

(d) The small business size standard for a Contractor providing an end item that it does not manufacture, process, or produce itself, for a contract other than a construction or service contract, is 500 employees, or 150 employees for information technology value-added resellers under NAICS code 541519, if the acquisition-

(1) Was set aside for small business and has a value above the simplified acquisition threshold;

(2) Used the HUBZone price evaluation preference regardless of dollar value, unless the Contractor waived the price evaluation preference; or

(3) Was an 8(a), HUBZone, service-disabled veteran-owned, economically disadvantaged women-owned, or women-owned small business set-aside or sole-source award regardless of dollar value.

(e) Except as provided in paragraph (g) of this clause, the Contractor shall make the representation(s) required by paragraph (b) of this clause by validating or updating all its representations in the Representations and Certifications section of the System for Award Management (SAM) and its other data in SAM, as necessary, to ensure that they reflect the Contractor's current status. The Contractor shall notify the contracting officer in writing within the timeframes specified in paragraph (b) of this clause, that the data have been validated or updated, and provide the date of the validation or update.

(f) If the Contractor represented that it was other than a small business concern prior to award of this contract, the Contractor may, but is not required to, take the actions required by paragraphs (e) or (g) of this clause.

(g) If the Contractor does not have representations and certifications in SAM, or does not have a representation in SAM for the NAICS code applicable to this contract, the Contractor is required to complete the following rerepresentation and submit it to the contracting office, along with the contract number and the date on which the rerepresentation was completed:

(1) The Contractor represents that it is, is not a small business concern under NAICS Code assigned to contract number.____ ____

(2) [ .] The Contractor represents Complete only if the Contractor represented itself as a small business concern in paragraph (g)(1) of this clause that it is, is not, a small disadvantaged business concern as defined in .13 CFR 124.1001

(3) . The Contractor represents that it is, is not a Women-owned small business (WOSB) joint venture eligible under the WOSB Program joint venture that complies with the requirements of 13 CFR 127.506(a) through (c). [ The Contractor shall enter the name and unique entity ____ identifier of each party to the joint venture: __.]

(4) . The Contractor represents that it is, is not a joint Economically disadvantaged women-owned small business (EDWOSB) joint venture venture that complies with the requirements of 13 CFR 127.506(a) through (c). [ The Contractor shall enter the name and unique entity identifier ____ of each party to the joint venture: __ .]

(5) . The Contractor represents that it Service-disabled veteran-owned small business (SDVOSB) joint venture eligible under the SDVOSB Program is, is not an SDVOSB joint venture eligible under the SDVOSB Program that complies with the requirements of 13 CFR 128.402. [ The ____ Contractor shall enter the name and unique entity identifier of each party to the joint venture: __.]

(6) [ ] The HUBZone joint venture eligible under the HUBZone Program. Complete only if the offeror is a HUBZone small business concern.

offeror represents, as part of its offer, that It is, is not a HUBZone joint venture that complies with the requirements of 13 CFR 126.616(a) through (c). [ The Contractor shall enter the name and unique entity identifier of each party to the joint venture: .] Each HUBZone small business ____ concern participating in the HUBZone joint venture must be certified as a HUBZone concern. [ Contractor to sign and date and insert authorized ____ signer's name and title.]

(End of clause)

52.252-2 Clauses Incorporated by Reference. (Tailored) (Feb 1998)

Clauses Incorporated By Reference (Feb 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

https://www.acquisition.gov/far-overhaul/far-part-deviation-guide/far-overhaul-part-52 https://www.acq.osd.mil/dpap/dars/dfars_far_overhaul_class_deviations.html

(End of clause)

52.252-6 Authorized Deviations in Clauses. (Tailored) (Nov 2020)

Authorized Deviations in Clauses (Nov 2020)

(a) The use in this solicitation or contract of any clause with an authorized deviation is Federal Acquisition Regulation (48 CFR Chapter 1) indicated by the addition of "(DEVIATION)" after the date of the clause.

(b) The use in this solicitation or contract of any clause with an Defense Federal Acquisition Regulation (48 CFR Chapter 2) authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation.

(End of clause)

DFARS Clauses Incorporated by Full Text

252.211-7003 Item Unique Identification and Valuation. (Jan 2023)

ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)

(a) . As used in this clause- Definitions

"Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

N0016726Q1152 https://www.acquisition.gov/far-overhaul/far-part-deviation-guide/far-overhaul-part-52 https://www.acq.osd.mil/dpap/dars/dfars_far_overhaul_class_deviations.html

"Concatenated unique item identifier" means-

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.

"Data matrix" means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022.

"Data qualifier" means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

"DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at . https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html

"DoD item unique identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

" Enterprise " means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

" Enterprise identifier" means a code that is uniquely assigned to an enterprise by an issuing agency.

"Government's unit acquisition cost" means-

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery.

"Issuing agency" means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

"Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier.

"Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

" Lot or batch number" means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

"Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

"Original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

"Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

"Serial number within the enterprise identifier" means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

"Serial number within the part, lot, or batch number" means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

"Serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

"Serialization within the part, lot, or batch number" means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

"Type designation" means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

"Unique item identifier" means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

"Unique item identifier type" means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at .https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(…