Solicitation Amendment N0016726Q11240003.pdf

This is a combined synopsis/solicitation for commercial items prepared in accordance with

Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation that Naval Surface

Warfare Center Carderock Division (NSWCCD) intends to issue and is a Request for Quotes

(RFQ) for the following Supplies and/or Services.

Naval Surface Warfare, Carderock Division (NSWCCD), has procurement request for a for contractor to provide a white paper of Technical Data Package (TDP), reference (1) for

Main Shaft Seals, Six (6) Unclassified Meetings and Six (6) Classified Meetings.

The provisions and clauses included and/or incorporated in this solicitation document are those in effect through the Federal Acquisition Circular. This RFQ incorporates all provisions and clauses in effect through Federal Acquisition Circular FAC 2026-01 effective 03/13/2026 located on https://www.acquisition.gov/?q=browsefar and the Defense Federal Acquisition Regulation

Supplement (DFARS) DPN 20260507 effective 05/07/2026 located at https://www.acq.osd.mil/dpap/dars/change_notices.html. SEE ATTACHED SOLICITATION

FOR CLAUSES AND PROVISIONS. The NAICS code is 339991 and the associated PSC code is C216. NOTE: A Class Waiver is not applicable to procurement unless the NAICS code, PSC, and NAICS Code Descriptor currently in effect, match the item(s) being procured. This procurement IS being set aside for small businesses.

Interested parties may identify their interest in this requirement by submitting a quote and/or capabilities statement no later than 11:00 AM on August 11, 2026. It is anticipated that one firm-fixed price purchase order will be issued in response to this RFQ.

All responses shall include the following.

1. Quote on company’s Letterhead

2. Pricing for all CLINS

3. Cage Code

4. FOB Destination

5. Point of contact

6. GSA contract number (if applicable)

7. Business Size for NAICS 339991

8. Quote should be rounded off to the nearest whole dollar

Each response must clearly indicate the capability of the quoter to meet all specifications and requirements. There will be no additional CLINs added for shipping. If there is a shipping charge, please include in the price.

Responses to this notice are due on or before 11:00 AM on August 11, 2026, Eastern Daylight

Time (EDT) to christopher.c.rolince.civ@us.navy.mil.

Point of Contact for this notice is Chris Rolince, 757-513-7247, christopher.c.rolince.civ@us.navy.mil https://www.acquisition.gov/?q=browsefar https://www.acq.osd.mil/dpap/dars/change_notices.html mailto:christopher.c.rolince.civ@us.navy.mil mailto:christopher.c.rolince.civ@us.navy.mil

Section A - Solicitation/Contract Form

Main Shaft Seal

N0016726Q11240003

Section B - Supplies or Services & Prices or Costs

Additional Information/Notes

Item Supplies/Service Quantity Unit Unit Price Amount

The objective is for contractor to provide a white paper of Technical Data Package (TDP). See Performance Work Statement (PWS) for detailed description of the requirements for CLIN 0001.

Pricing Arrangement: Firm Fixed Price

1 Job

Option Line Item

Exchange Data and Information in Support of UNCLASSIFIED Meetings. See Performance Work Statement (PWS) for detailed description.

Pricing Arrangement: Firm Fixed Price

1 Job

Option Line Item

Exchange Data and Information in Support of UNCLASSIFIED Meetings. See Performance Work Statement (PWS) for detailed description.

Pricing Arrangement: Firm Fixed Price

1 Job

Option Line Item

Exchange Data and Information in Support of UNCLASSIFIED Meetings. See Performance Work Statement (PWS) for detailed description.

Pricing Arrangement: Firm Fixed Price

1 Job

Option Line Item

Exchange Data and Information in Support of UNCLASSIFIED Meetings. See Performance Work Statement (PWS) for detailed description.

Pricing Arrangement: Firm Fixed Price

1 Job

Option Line Item

Exchange Data and Information in Support of UNCLASSIFIED Meetings. See Performance Work Statement (PWS) for detailed description.

Pricing Arrangement: Firm Fixed Price

1 Job

Option Line Item

Exchange Data and Information in Support of UNCLASSIFIED Meetings. See Performance Work Statement (PWS) for detailed description.

Pricing Arrangement: Firm Fixed Price

1 Job

Option Line Item

Exchange Data and Information in Support of CLASSIFIED Meetings. See Performance Work Statement (PWS) for detailed description.

Pricing Arrangement: Firm Fixed Price

1 Job

Option Line Item

Exchange Data and Information in Support of CLASSIFIED Meetings. See Performance Work Statement (PWS) for detailed description.

Pricing Arrangement: Firm Fixed Price

1 Job

Option Line Item

Exchange Data and Information in Support of CLASSIFIED Meetings. See Performance Work Statement (PWS) for detailed description.

Pricing Arrangement: Firm Fixed Price

1 Job

Option Line Item

Exchange Data and Information in Support of CLASSIFIED Meetings. See Performance Work Statement (PWS) for detailed description.

Pricing Arrangement: Firm Fixed Price

1 Job

Option Line Item

Exchange Data and Information in Support of CLASSIFIED Meetings. See Performance Work Statement (PWS) for detailed description.

Pricing Arrangement: Firm Fixed Price

1 Job

Option Line Item

Exchange Data and Information in Support of CLASSIFIED Meetings. See Performance Work Statement (PWS) for detailed description.

Pricing Arrangement: Firm Fixed Price

1 Job

Section C - Description/Specifications/Statement of Work

PERFORMANCE WORK STATEMENT (PWS)

Main Shaft Seal

1. BACKGROUND: The Advanced Propulsor Management Office (APMO, Code 808) in the Naval Architecture and Engineering Department (Code 80) of the Naval Surface Warfare Center, Carderock Division (NSWCCD) is responsible for managing the Research and Development (R&D), design, testing, and delivery of United States Navy submarine propulsors and shaft.

2. DESCRIPTION OF SERVICES/INTRODUCTION: The contractor shall provide all necessary expertise to conduct a thorough engineering review. The contractor will function as a subject matter expert, applying core competencies in science, engineering, and fluid dynamics to perform adequacy assessments of the design. Adequacy assessments shall include engineering calculation. The contractor shall also support Government directed meetings by providing technical expertise, analysis, and subject matter input as required.

3. OBJECTIVE: The objective is for contractor to provide a white paper of Technical Data Package (TDP), reference (1).

3.1. Requirements:

3.1.1. Technical Review (CLIN 0001): The contractor shall perform a technical review of the TDP.

Reference (1) provides an existing US Navy design. Technical review shall include but not limited to evaluation of the US Navy seal design for sealing performance, identify key characteristics and features, offer suggestions for improvement, and indicate any areas where the rationale for design decisions cannot be determined in contractors' opinion, identify any dimensions, tolerances, notes, or other requirements that are unclear, conflicting, or require further information.

3.1.2. Manufacturing Review (CLIN 0001): The contractor shall perform a notional manufacturing plan in order to evaluate the feasibility of manufacturing the Navy seal design. Review shall include but not limited to describing the manufacturing challenges or risks the contractor foresees based on the design's geometry, materials, and specified tolerances.

3.1.3. Inspection Review (CLIN 0001): The contractor shall perform a notional inspection plan of US Navy seal design. Review shall include but not limited to inspection points, measurement tools to be used, inspection method, sample size/frequency, inspection point through manufacturing process, documentation and reporting, and corrective action plan.

3.1.4. Testing (CLIN 0001):

3.1.4.1. The contractor shall recommend and develop a conceptual design for a test rig capable of supporting seal design risk reduction. This should include but not limited to test rig size (i.e. sub /full-scale), rationale supporting size, concept design and layout. Rig should be able to accommodate dynamic motion capabilities, change in shaft rpm, pressure and temperature, inject sediment like particles, filtration system, instrumentation and monitoring (i.e. live measurements (i.

e. leakage rate, system pressures and temperature, shaft speed and torque, alignment, vibration, etc.)

3.1.4.2. The contractor shall recommend a plan and criteria that addresses production-level acceptance testing of the US Navy seal design.

3.1.5. Reporting (CLIN 0001): The contractor shall provide a monthly status report via PowerPoint presentation or portable document format (pdf), (CDRL A001. The contractor shall submit a final white paper in pdf to include engineering assessment and calculations, numerical simulations, plans, results etc.

requested in paragraph 3.1. Additionally, the contractor shall comment on lessons learned from the review and assessment and offer recommendations for future process improvements, areas of further investigation, or suggested follow-on demonstrations (CDRL A002). Contractor shall meet the requirements for Controlled Unclassified Information (CUI) transmittal of electronic documents. Upon contractor request, POCs can send a DOD SAFE Request a Drop-off for CUI transmittal.

3.1.6. Exchange Data and Information in Support of UNCLASSIFIED Meetings:

- (Option) CLIN 0002 - Unclassified Meeting #1: The contractor shall provide technical consultation and analysis at appropriately cleared sites and shall participate in the first Government directed unclassified technical meeting at the Government designated facility in the Washington, DC area. The contractor shall ensure key personnel possess, or are willing to obtain, required security clearances and shall conduct a working session of up to six hours, not including travel time.

- (Option) CLIN 0003 - Unclassified Meeting #2: The contractor shall provide technical consultation and analysis at appropriately cleared sites and shall participate in the first Government directed unclassified technical meeting at the Government designated facility in the Washington, security clearances and shall conduct a working session of up to six hours, not including travel time.

- (Option) CLIN 0004 - Unclassified Meeting #3: The contractor shall provide technical consultation and analysis at appropriately cleared sites and shall participate in the first Government directed unclassified technical meeting at the Government designated facility in the Washington, security clearances and shall conduct a working session of up to six hours, not including travel time.

- (Option) CLIN 0005 - Unclassified Meeting #4: The contractor shall provide technical consultation and analysis at appropriately cleared sites and shall participate in the first Government directed unclassified technical meeting at the Government designated facility in the Washington, security clearances and shall conduct a working session of up to six hours, not including travel time.

- (Option) CLIN 0006 - Unclassified Meeting #5: The contractor shall provide technical consultation and analysis at appropriately cleared sites and shall participate in the first Government directed unclassified technical meeting at the Government designated facility in the Washington, security clearances and shall conduct a working session of up to six hours, not including travel time.

- (Option) CLIN 0007 - Unclassified Meeting #6: The contractor shall provide technical consultation and analysis at appropriately cleared sites and shall participate in the first Government directed unclassified technical meeting at the Government designated facility in the Washington, security clearances and shall conduct a working session of up to six hours, not including travel time.

3.1.7. Exchange Data and Information in Support of CLASSIFIED Meetings:

- (Option) CLIN 0008 - Classified Meeting #1: The contractor shall provide technical consultation and analysis at appropriately cleared sites and shall participate in the first Government directed classified technical meeting at the Government designated facility in the Washington, DC area. The contractor shall ensure key personnel possess, or are willing to obtain, required security clearances and shall conduct a working session of up to six hours, not including travel time.

- (Option) CLIN 0009 - Classified Meeting #2: The contractor shall provide technical consultation and analysis at appropriately cleared sites and shall participate in the first Government directed classified technical meeting at the Government designated facility in the Washington, DC area. The contractor shall ensure key personnel possess, or are willing to obtain, required security clearances and shall conduct a working session of up to six hours, not including travel time.

- (Option) CLIN 0010 - Classified Meeting #3: The contractor shall provide technical consultation and analysis at appropriately cleared sites and shall participate in the first Government directed classified technical meeting at the Government designated facility in the Washington, DC area. The contractor shall ensure key personnel possess, or are willing to obtain, required security clearances and shall conduct a working session of up to six hours, not including travel time.

- (Option) CLIN 0011 - Classified Meeting #4: The contractor shall provide technical consultation and analysis at appropriately cleared sites and shall participate in the first Government directed classified technical meeting at the Government designated facility in the Washington, DC area. The contractor shall ensure key personnel possess, or are willing to obtain, required security clearances and shall conduct a working session of up to six hours, not including travel time.

- (Option) CLIN 0012 - Classified Meeting #5: The contractor shall provide technical consultation and analysis at appropriately cleared sites and shall participate in the first Government directed classified technical meeting at the Government designated facility in the Washington, DC area. The contractor shall ensure key personnel possess, or are willing to obtain, required security clearances and shall conduct a working session of up to six hours, not including travel time.

- (Option) CLIN 0013 - Classified Meeting #6: The contractor shall provide technical consultation and analysis at appropriately cleared sites and shall participate in the first Government directed classified technical meeting at the Government designated facility in the Washington, DC area. The contractor shall ensure key personnel possess, or are willing to obtain, required security clearances and shall conduct a working session of up to six hours, not including travel time.

4 SPECIAL QUALIFICATIONS:

Not applicable.

5 GOVERNMENT FURNISHED EQUIPMENT/PROPERTY/INFORMATION:

1. Reference #1 - (CUI) Technical Data Package US Navy Main Shaft Seal, dtd 20260324.

6 PERIOD OF PERFORMANCE:

The overall Period of Performance (PoP) for this requirement shall be 24 months from date of award.

- CLIN 0001: Base PoP shall be 12 months from date of award.

- (Option) CLIN 0002: If exercised, the PoP shall be 1-2 months from date of award.

- (Option) CLIN 0003: If exercised, the PoP shall be 3-4 months from date of award.

- (Option) CLIN 0004: If exercised, the PoP shall be 5-6 months from date of award.

- (Option) CLIN 0005: If exercised, the PoP shall be 7-8 months from date of award.

- (Option) CLIN 0006: If exercised, the PoP shall be 9-10 months from date of award.

- (Option) CLIN 0007: If exercised, the PoP shall be 11-12 months from date of award.

- (Option) CLIN 0008: If exercised, the PoP shall be 13-14 months from date of award.

- (Option) CLIN 0009: If exercised, the PoP shall be 15-16 months from date of award.

- (Option) CLIN 0010: If exercised, the PoP shall be 17-18 months from date of award.

- (Option) CLIN 0011: If exercised, the PoP shall be 19-20 months from date of award.

- (Option) CLIN 0012: If exercised, the PoP shall be 21-22 months from date of award.

- (Option) CLIN 0013: If exercised, the PoP shall be 23-24 months from date of award.

7 SECURITY REQUIREMENTS:

7.1 Information Handling

- CUI including Legacy FOUO and Covered Defense Information (meeting the definition of 48 CFR 252.204-7012(a)) generated and/or provided under this contract shall be marked and safeguarded as specified in DoD Instruction 5200.48.

Any product containing Covered Defense Information shall be assigned a distribution statement D in accordance with DoDI 5230.24

INFORMATION SECURITY: If the work is performed at the Contractor's facility, the Contractor shall implement and maintain security procedures and controls to prevent unauthorized disclosure of classified information and CUI. If the work is performed at the Government's facility, the Contractor shall comply with facility policy.

CUI INCIDENT REPORTING AND RESPONSE: The Contractor shall promptly report any unauthorized, inadvertent, or illegal release or disclosure of CUI to the Contracting Officer's Representative / Technical Point of Contact (TPOC), Procuring Contracting Officer, and the Security Office. Contractor personnel shall coordinate this effort through the relevant industry site FSO.

NNPI access is required to support NNPI discussion during technical meetings. Meetings will take place at the following locations:

NSWC Carderock: 9500 MacArthur Boulevard, West Bethesda, Maryland 20817-5700 General Dynamics Electric Boat Washington Engineering Office: Maritime Plaza, 1201 M Street SE, Suite 100, Washington, DC 20003

NNPI materials includes but not limited to drawings, technical manuals, engineering assessments, and meeting discussion.

7.2 Personnel Security Clearance

Designated key personnel shall hold a SECRET clearance prior to being granted access to classified information up to the level of SECRET.All non-key personnel do not require a security clearance prior to being granted access to CUI information.

7.3 Classified Information Access

During performance of PWS the contractor may have access to information classified to the level indicated on the attached DD Form 254, Contract Security Classification Specification attached to the contract.

8 DELIVERABLES

The contractor shall deliver the following Contract Data Requirements Lists (CDRLs):

CDRL Title Data Item Description

A001 Status Report DI-MGMT-80368A

A002 Technical Report DI-MISC-80508B

The reports shall be delivered to the Government Points of Contacts listed in section 9. Any classified reports shall be delivered in accordance with the instructions provided in Form DD 254.

9 GOVERNMENT POINTS OF CONTACT

Technical Point of Contacts

Pablo Bracero, NSWCCD Code 808

Phone: 227-228-8617;

Email: pablo.l.bracero.civ@us.navy.mil

Christopher Hoerbelt, NSWCCD Code 808

Phone: 240-271-3304;

Email: christopher.v.hoerbelt.civ@us.navy.mil

Requirements The objective is for contractor to provide a white paper of Technical Data Package (TDP) for Main Shaft Seal, reference (1).

Section D - Packaging and Marking

Section E - Inspection and Acceptance

Section F - Deliveries or Performance

Overall Contract Delivery Period

Contractor Destination

Line Item Delivery Schedule Quantity Address and POC Special Handling/Notes

Delivery Period From 21 Aug 2026 to 20 Aug 2027

1 Job Ship To DoDAAC: N00024 CountryCode: USA

NAVAL SEA SYSTEMS COMMAND

1333 ISAAC HULL AVE SE STOP 3301,

WASHINGTON NAVY YARD DC 20376-3301

WASHINGTON NAVY YARD, DC 20376-3301

UNITED STATES

TBD, TBD

Email: TBD Telephone: TBD

FoB Details Contractor Destination

Option Line Item

Delivery Period From 21 Aug 2027 to 20 Aug 2028

1 Job Ship To DoDAAC: N00024 CountryCode: USA

NAVAL SEA SYSTEMS COMMAND

1333 ISAAC HULL AVE SE STOP 3301,

WASHINGTON NAVY YARD DC 20376-3301

WASHINGTON NAVY YARD, DC 20376-3301

UNITED STATES

TBD, TBD

Email: TBD Telephone: TBD

FoB Details Contractor Destination

Option Line Item

Delivery Period From 21 Aug 2027 to 20 Aug 2028

1 Job Ship To DoDAAC: N00024 CountryCode: USA

NAVAL SEA SYSTEMS COMMAND

1333 ISAAC HULL AVE SE STOP 3301,

WASHINGTON NAVY YARD DC 20376-3301

WASHINGTON NAVY YARD, DC 20376-3301

UNITED STATES

TBD, TBD

Email: TBD Telephone: TBD

Option Line Item

Delivery Period From 21 Aug 2027 to 20 Aug 2028

1 Job Ship To DoDAAC: N00024 CountryCode: USA

NAVAL SEA SYSTEMS COMMAND

1333 ISAAC HULL AVE SE STOP 3301,

WASHINGTON NAVY YARD DC 20376-3301

WASHINGTON NAVY YARD, DC 20376-3301

UNITED STATES

TBD, TBD

Email: TBD Telephone: TBD

Option Line Item

Delivery Period From 21 Aug 2027 to 20 Aug 2028

1 Job Ship To DoDAAC: N00024 CountryCode: USA

NAVAL SEA SYSTEMS COMMAND

1333 ISAAC HULL AVE SE STOP 3301,

WASHINGTON NAVY YARD DC 20376-3301

WASHINGTON NAVY YARD, DC 20376-3301

UNITED STATES

TBD, TBD

Email: TBD Telephone: TBD

Option Line Item

Delivery Period From 21 Aug 2027 to 20 Aug 2028

1 Job Ship To DoDAAC: N00024 CountryCode: USA

NAVAL SEA SYSTEMS COMMAND

1333 ISAAC HULL AVE SE STOP 3301,

WASHINGTON NAVY YARD DC 20376-3301

WASHINGTON NAVY YARD, DC 20376-3301

UNITED STATES

TBD, TBD

Email: TBD Telephone: TBD

Option Line Item

Delivery Period From 21 Aug 2027 to 20 Aug 2028

1 Job Ship To DoDAAC: N00024 CountryCode: USA

NAVAL SEA SYSTEMS COMMAND

1333 ISAAC HULL AVE SE STOP 3301,

WASHINGTON NAVY YARD DC 20376-3301

WASHINGTON NAVY YARD, DC 20376-3301

UNITED STATES

TBD, TBD

Email: TBD Telephone: TBD

Option Line Item

Delivery Period From 21 Aug 2027 to 20 Aug 2028

1 Job Ship To DoDAAC: N00024 CountryCode: USA

NAVAL SEA SYSTEMS COMMAND

1333 ISAAC HULL AVE SE STOP 3301,

WASHINGTON NAVY YARD DC 20376-3301

WASHINGTON NAVY YARD, DC 20376-3301

UNITED STATES

TBD, TBD

Email: TBD Telephone: TBD

Delivery Period From 21 Aug 2027 to 20 Aug 2028

1 Job Ship To DoDAAC: N00024 CountryCode: USA

NAVAL SEA SYSTEMS COMMAND

Option Line Item

1333 ISAAC HULL AVE SE STOP 3301,

WASHINGTON NAVY YARD DC 20376-3301

WASHINGTON NAVY YARD, DC 20376-3301

UNITED STATES

TBD, TBD

Email: TBD Telephone: TBD

Option Line Item

Delivery Period From 21 Aug 2027 to 20 Aug 2028

1 Job Ship To DoDAAC: N00024 CountryCode: USA

NAVAL SEA SYSTEMS COMMAND

1333 ISAAC HULL AVE SE STOP 3301,

WASHINGTON NAVY YARD DC 20376-3301

WASHINGTON NAVY YARD, DC 20376-3301

UNITED STATES

TBD, TBD

Email: TBD Telephone: TBD

Option Line Item

Delivery Period From 21 Aug 2027 to 20 Aug 2028

1 Job Ship To DoDAAC: N00024 CountryCode: USA

NAVAL SEA SYSTEMS COMMAND

1333 ISAAC HULL AVE SE STOP 3301,

WASHINGTON NAVY YARD DC 20376-3301

WASHINGTON NAVY YARD, DC 20376-3301

UNITED STATES

TBD, TBD

Email: TBD Telephone: TBD

Option Line Item

Delivery Period From 21 Aug 2027 to 20 Aug 2028

1 Job Ship To DoDAAC: N00024 CountryCode: USA

NAVAL SEA SYSTEMS COMMAND

1333 ISAAC HULL AVE SE STOP 3301,

WASHINGTON NAVY YARD DC 20376-3301

WASHINGTON NAVY YARD, DC 20376-3301

UNITED STATES

TBD, TBD

Email: TBD Telephone: TBD

Option Line Item

Delivery Period From 21 Aug 2027 to 20 Aug 2028

1 Job Ship To DoDAAC: N00024 CountryCode: USA

NAVAL SEA SYSTEMS COMMAND

1333 ISAAC HULL AVE SE STOP 3301,

WASHINGTON NAVY YARD DC 20376-3301

WASHINGTON NAVY YARD, DC 20376-3301

UNITED STATES

TBD, TBD

Email: TBD Telephone: TBD

Section G - Contract Administration Data

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. Dec 2018

DFARS Clauses Incorporated by Full Text

252.232-7006 Wide Area WorkFlow Payment Instructions. (Jan 2023)

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

(a) As used in this clause- Definitions.

"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.

"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.

"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as Electronic invoicing.

authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) To access WAWF, the Contractor shall- WAWF access.

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice WAWF training.

Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/

(e) Document submissions may be via web entry, Electronic Data Interchange, or File Transfer WAWF methods of document submission.

Protocol.

(f) The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF payment instructions.

WAWF for this contract or task or delivery order:

(1) The Contractor shall submit payment requests using the following document type(s): Document type.

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items-

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

Invoice and Receiving Report (COMBO)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

N/A

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial financing, submit a commercial financing request.

(2) ) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF "combo" document type to create some combinations of invoice and receiving report in one step.]

(3) The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF Document routing.

when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC N62825

Issue By DoDAAC N00167

Admin DoDAAC N00167

Inspect By DoDAAC N00167

Ship To Code N00167

Ship From Code ____

Mark For Code ____

Service Approver (DoDAAC) ____

Service Acceptor (DoDAAC) ____

Accept at Other DoDAAC ____

LPO DoDAAC ____

DCAA Auditor DoDAAC ____

Other DoDAAC(s) ____

(*Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert "See Schedule" or "Not applicable.")

(**Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)

(4) The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in Payment request.

accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F. Receiving report.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

Ademola Oriowo at 301-503-0809 or by email ademola.m.oriowo.civ@us.navy.mil NAVSEA Helpdesk at WAWFHQ@navy.mil

CONUS ONLY: 866-618-5988, COMMERCIAL: 801-605-7095

You may also contact the SAP Coordinator: Tricia Middleton at patricia.l.middleton.civ@us.navy.mil

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of clause)

Additional Regulation or Supplemental Clauses Incorporated by Full Text

G-232-H002 H002 PAYMENT INSTRUCTIONS (NAVSEA) (FEB 2024) (Feb 2024)

Payment office allocation methods can be found in the table at DFARS PGI 204.7108(b)(2) (https://www.acq.osd.mil/dpap /dars/pgi/pgi_htm/current/PGI204_71.htm#payment_instructions).

(End of text)

G-242-H001 GOVERNMENT CONTRACTADMINISTRATION POINTS-OF-CONTACT AND

RESPONSIBILITIES (NAVSEA) (OCT 2023)

(Oct 2023)

(a) The Government reserves the right to administratively substitute any of the points of contact listed below at any time.

(b) The contracting officer is the only person authorized to change this contract or orders issued thereunder. The Contractor shall not comply with any order, direction or request of Government personnel - that would constitute a change - unless it is issued in writing and signed by the Contracting Officer or is pursuant to specific authority otherwise included as part of this contract. If, in the opinion of the contractor, an effort outside the existing scope of this contract is requested, the contractor shall promptly comply with the Notification of Changes clause of this contract.

(c) The points of contact are as follows:

(i) The Procuring Contracting Officer (PCO) is:

Name: Sydney Mcdonald-Johnson Address:

904 Corporate Lane Chesapeake, VA 23320 Phone: (757) 773-0329 E-mail: sydney.m.mcdonald-johnson.civ@us.navy.mil

(ii) The Contract Specialist is:

Name: Chris Rolince Address:

904 Corporate Lane Chesapeake, VA 23320 Phone: (757) 513-7247 E-mail: Christopher.c.rolince.civ@us.navy.mil

(d) The Technical Point of Contact (TPOC) is the contracting officer's representative for technical matters when a COR is not appointed. The TPOC is responsible for technical issues of contract administration, such as providing all items of Government Furnished Information (GFI), Government Furnished Material (GFM) and Government Furnished Equipment (GFE) if specified in the contract as well as the inspection and acceptance of all contract deliverables.

The Technical Point of Contact (TPOC) is:

Name: [ * ] Address: [ *Street ] [ *City, State, Zip ] Phone: (Area Code) xxx- [xxxx] E-mail: [ * ]

[ * ] To be completed at contract award

(End of Text)

G-242-H002 HOURS OF OPERATION AND HOLIDAY SCHEDULE (NAVSEA) (JUL 2021) (Jul 2021)

(a) The policy of this activity is to schedule periods of reduced operations or shutdown during holiday periods. Deliveries will not be accepted on Saturdays, Sundays or Holidays except as specifically requested by the [insert activity name]. All goods or services attempted to be delivered on a Saturday, Sunday or Holiday without specific instructions from the Contracting Officer or his duly appointed representative will be returned to the contractor at the contractor's expense with no cost or liability to the U.

S. Government.

(b) The federal Government observes public Holidays that have been established under 5 U.S.C. 6103. The actual date of observance for each of the holidays, for a specific calendar year, may be obtained from the OPM website at OPM.GOV or by using the following direct link: https://www.opm.gov/policy-data-oversight/pay-leave/federal-holidays/.

(c) Delayed Opening, Early Dismissal and Closure of Government Facilities. When a Government facility has a delayed opening, is closed or Federal employees are dismissed early (due to severe weather, security threat, security exercise, or a facility related problem) that prevents personnel from working, onsite contractor personnel regularly assigned to work at that facility shall follow the same reporting and/or departure directions given to Government personnel. The contractor shall not direct charge to the contract for such time off, but shall follow parent company policies regarding taking leave (administrative or other). Non-essential contractor personnel, who are not required to remain at or report to the facility, shall follow their parent company policy regarding whether they should go/stay home or report to another company facility. Subsequent to an early dismissal, delayed opening, or during periods of inclement weather, onsite contractors should monitor the OPM website as well as radio and television announcements before departing for work to determine if the facility is closed or operating on a delayed arrival basis.

(d) When Federal employees are excused from work due to a holiday or a special event (that is unrelated to severe weather, a security threat, or a facility related problem), on site contractors shall continue working established work hours or take leave in accordance with parent company policy. Those contractor employees who take leave shall not direct charge the non-working hours to the contract. Contractors are responsible for predetermining and disclosing their charging practices for early dismissal, delayed openings, or closings in accordance with the FAR, applicable cost accounting standards, and the company's established policy and procedures. Contractors shall follow their disclosed charging practices during the contract period of performance, and shall not follow any verbal directions to the contrary. The Contracting Officer will make the determination of cost allowability for time lost due to facility closure in accordance with FAR, applicable Cost Accounting Standards, and the Contractor's established accounting policy and procedures.

(e) If you intend to visit the Contracts Office, it is advised that you call for an appointment at least 24 hours in advance.

N0016726Q11240003 https://www.opm.gov/policy-data-oversight/pay-leave/federal-holidays/ https://www.opm.gov/policy-data-oversight/pay-leave/federal-holidays

(f) The hours of operation are as follows:

AREA FROM TO

West Bethesda, MD 0800 1400 Norfolk, VA 0800 1400 Virginia Beach, VA 0800 1400

(g) All deliveries to the Receiving Officer or Technical Point of Contact address are identified in Box 15, shall be made Monday through Friday from 0800 to 1400, local time. Deliveries will not be accepted after 1400. No deliveries will be accepted on federal government holidays.

(End of Text)

G-242-W001 CONTRACT ADMINISTRATION FUNCTIONS (NAVSEA) (OCT 2018) (Oct 2018)

(a) In accordance with FAR 42.302(a) all functions listed are delegated to the ACO except the following items to be retained by the PCO:

N/A

(b) In accordance with FAR 42.302(b), the following additional functions are delegated to the ACO:

N/A

(End of Text)

Section H - Special Contract Requirements

Section I - Contract Clauses

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.203-3 Gratuities. Apr 1984 52.203-12 Limitation on Payments to Influence Certain Federal Transactions. Jun 2020 52.203-13 Contractor Code of Business Ethics and Conduct. Nov 2021 52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements. Jan 2017 52.204-19 Incorporation by Reference of Representations and Certifications. Dec 2014

52.212-4 Terms and Conditions-Commercial Products and Commercial Services. (Deviation 2026- O0038)

Feb 2026

52.222-90 Addressing DEI Discrimination by Federal Contractors. (Deviation 2026-O0038) Apr 2026 52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving. May 2024 52.232-33 Payment by Electronic Funds Transfer-System for Award Management. Oct 2018 52.232-39 Unenforceability of Unauthorized Obligations. Jun 2013

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

252.203-7000 Requirements Relating to Compensation of Former DoD Officials. Sep 2011 252.203-7002 Requirement to Inform Employees of Whistleblower Rights. Dec 2022 252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting. May 2024 252.204-7014 Limitations on the Use or Disclosure of Information by Litigation Support Contractors. Jan 2023 252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support. Jan 2023

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.

Jan 2023

252.204-7020 NIST SP 800-171 DoD Assessment Requirements. Nov 2023 252.211-7008 Use of Government-Assigned Serial Numbers. Sep 2010 252.223-7008 Prohibition of Hexavalent Chromium. Jan 2023 252.225-7002 Qualifying Country Sources as Subcontractors. Mar 2022 252.225-7048 Export-Controlled Items. Jun 2013 252.232-7010 Levies on Contract Payments. Dec 2006 252.237-7010 Prohibition on Interrogation of Detainees by Contractor Personnel. Jan 2023 252.239-7010 Cloud Computing Services. Jan 2023 252.243-7001 Pricing of Contract Modifications. Dec 1991 252.244-7000 Subcontracts for Commercial Products or Commercial Services. Nov 2023 252.246-7008 Sources of Electronic Parts. Jan 2023 252.247-7023 Transportation of Supplies by Sea. Oct 2024

FAR Clauses Incorporated by Full Text

52.222-50 Combating Trafficking in Persons. (Deviation 2026-O0038) (Alternate I) (Feb 2026) Alternate I (Feb 2026)

Alternate I (FEB 2026) (DEVIATION 2026-O0038). As prescribed in , substitute the following paragraph in place of paragraph 22.1703-2(a)(2) (c)(1)(i) of the basic clause:

(c)(1)(i)(A) The United States Government's policy prohibiting trafficking in persons described in paragraph (b) of this clause; and

(B) The following directive(s) or notice(s) applicable to employees performing work at the contract place(s) of performance as indicated below:

Document Title Document may be obtained from: Applies to performance in/at:

[Contracting Officer must insert title of directive/notice; indicate the document is attached or provide source (such as website link) for obtaining ]document; and, indicate the contract performance location outside the United States to which the document applies.

52.252-2 Clauses Incorporated by Reference. (Feb 1998)

Clauses Incorporated By Reference (Feb 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

www.acquisition.gov

(End of clause)

52.252-6 Authorized Deviations in Clauses. (Nov 2020)

Authorized Deviations in Clauses (Nov 2020)

(a) The use in this solicitation or contract of any clause with an authorized deviation is Federal Acquisition Regulation (48 CFR Chapter 1) indicated by the addition of "(DEVIATION)" after the date of the clause.

(b) The use in this solicitation or contract of any clause with an authorized deviation Defense Federal Acquisition Regulation (48 CFR Chapter 2) is indicated by the addition of "(DEVIATION)" after the name of the regulation.

(End of clause)

DFARS Clauses Incorporated by Full Text

252.204-7021 Contractor Compliance with the Cybersecurity Maturity Model Certification Level Requirements.

(Nov 2025)

CONTRACTOR COMPLIANCE WITH THE CYBERSECURITY MATURITY MODEL CERTIFICATION LEVEL REQUIREMENTS (NOV 2025)

(a) . As used in this clause- Definitions

"Controlled unclassified information" means information the Government creates or possesses, or information an entity creates or possesses for or on behalf of the Government, that a law, regulation, or Governmentwide policy requires or permits an agency to handle using safeguarding or dissemination controls (32 CFR 2002.4(h)).

"Current" means-

(1) With regard to Conditional Cybersecurity Maturity Model Certification (CMMC) Status-

(i) Not older than 180 days for Conditional Level 2 (Self) assessments and Conditional Level 2 (certified third-party assessment organization (C3PAO)) assessments, with-

(A) No changes in compliance with the requirements at 32 CFR part 170 since the Conditional CMMC Status date (see 32 CFR

170.16 and 170.17); and

(B) A corresponding affirmation of continuous compliance by an affirming official (see 32 CFR 170.4); and

(ii) Not older than 180 days for Conditional Level 3 (Defense Industrial Base Cybersecurity Assessment Center (DIBCAC)) assessments, with-

(A) No changes in compliance with the requirements at 32 CFR part 170 since the Conditional CMMC Status date (see 32 CFR 170.18); and

(B) A corresponding affirmation of continuous compliance by an affirming official;

(2) With regard to Final CMMC Status-

(i) Not older than 1 year for Final Level 1 (Self), with-

(A) No changes in compliance with the requirements at 32 CFR part 170 since the Final CMMC Status date (see 32 CFR 170.15); and

(B) A corresponding affirmation of continuous compliance, not older than 1 year, by an affirming official;

(ii) Not older than 3 years for Final Level 2 (Self) assessments and Final Level 2 (C3PAO) assessments, with-

(A) No changes in compliance with the requirements at 32 CFR part 170 since the Final CMMC Status date (see 32 CFR 170.16 and 170.17); and

(B) A corresponding affirmation of continuous compliance, not older than 1 year, by an affirming official; and

(iii) Not older than 3 years for Final Level 3 (DIBCAC) assessments, with-

(A) No changes in compliance with the requirements at 32 CFR part 170 since the Final CMMC Status date (see 32 CFR 170.18); and

(B) A corresponding affirmation of continuous compliance, not older than 1 year, by an affirming official; and

(3) With regard to affirmation of continuous compliance (32 CFR 170.22), not older than 1 year with no changes in compliance with the requirements at 32 CFR part 170.

"Cybersecurity Maturity Model Certification (CMMC) status" means the result of meeting or exceeding the minimum required score for the corresponding assessment. The potential statuses are as follows:

(1) Final Level 1 (Self).

(2) Conditional Level 2 (Self).

(3) Final Level 2 (Self).

(4) Conditional Level 2 (C3PAO).

(5) Final Level 2 (C3PAO).

(6) Conditional Level 3 (DIBCAC).

(7) Final Level 3 (DIBCAC).

"Cybersecurity Maturity Model Certification unique identifier (CMMC UID)" means 10 alpha-numeric characters assigned to each CMMC assessment and reflected in the Supplier Performance Risk System (SPRS) for each contractor information system.

"Federal contract information (FCI)" means information, not intended for public release, that is provided by or generated for the Government under a contract to develop or deliver a product or service to the Government. It does not include information provided by the Government to the public, such as on public websites, or simple transactional information, such as information necessary to process payments.

"Plan of action and milestones" means a document that identifies tasks to be accomplished. It details resources required to accomplish the elements of the plan, any milestones in meeting the tasks, and scheduled completion dates for the milestones, as defined in National Institute of Standards and Technology Special Publication 800-115 (32 CFR 170.21).

(b) . The Cybersecurity Maturity Model Certification (CMMC) is a framework for assessing a contractor's compliance with Framework applicable information security protections (see 32 CFR part 170).

(c) . The CMMC assessments will not duplicate efforts from any other comparable DoD assessment, except for rare circumstances Duplication when a reassessment may be necessary, for example, when there are indications of issues with cybersecurity and/or compliance with CMMC requirements.

(d) . The Contractor shall- Requirements

(1)(i) Have and maintain for the duration of the contract a current CMMC status at the following CMMC level, or higher: ____ for all information Contracting Officer insert: CMMC Level 1 (Self); CMMC Level 2 (Self); CMMC Level 2 (C3PAO); or CMMC Level 3 (DIBCAC) systems used in performance of the contract, task order, or delivery order that process, store, or transmit FCI or CUI; and

(ii) Consult 32 CFR 170.23 related to the flowdown of the CMMC requirements, and flow down the correct CMMC level to subcontracts and other contractual instruments;

(2) Only process, store, or transmit FCI or CUI on contractor information systems that have a CMMC status at the CMMC level required in paragraph (d)(1) of this clause, or higher;

(3) Complete on an annual basis, and maintain as current, an affirmation, by the affirming official (see 32 CFR 170.4), of continuous compliance with the requirements associated with the CMMC level required in paragraph (d)(1) of this clause in the Supplier Performance Risk System (SPRS) ( ) for each CMMC UID applicable to each of the contractor information systems that process, store, or transmit FCI https://piee.eb.mil or CUI and that are used in performance of the contract;

(4) Ensure all subcontractors and suppliers complete prior to subcontract award, and maintain on an annual basis, an affirmation, by the affirming official (see 32 CFR 170.4), of continuous compliance with the requirements associated with the CMMC level required for the subcontract or other contractual instrument for each of the subcontractor information systems that process, store, or transmit FCI or CUI and that are used in performance of the subcontract; and

(5) If the Contractor has a CMMC Status of Conditional, successfully close out a valid plan of action and milestones (32 CFR 170.21) to achieve a CMMC Status of Final.

(e) . The Contractor shall- Reporting

(1) Submit to the Contracting Officer-

(i) The CMMC UID(s) issued by SPRS for contractor information systems that will process, store, or transmit FCI or CUI during performance of the contract; and

(ii) Any changes in the CMMC UIDs generated in SPRS throughout the life of the contract, task order, or delivery order, if applicable;

(2) Enter into SPRS the results of a current self-assessment for each CMMC UID, not covered by a C3PAO assessment or DIBCAC assessment, applicable to each of the contractor information systems that process, store, or transmit FCI or CUI and that are used in performance of the contract; and

(3) Complete in SPRS on an annual basis and maintain as current an affirmation of continuous compliance by the affirming official (see 32 CFR 170.4) for each self-assessment, C3PAO assessment, or DIBCAC assessment required under the contract in SPRS.

(f) . The Contractor shall- Subcontracts

(1) Insert the substance of this clause, including this paragraph (f) and excluding paragraph (e)(1), in subcontracts and other contractual instruments, including those for the acquisition of commercial products or commercial services, excluding commercially available off-the-shelf items, if the subcontract or other contractual instrument will contain a requirement to process, store, or transmit FCI or CUI; and

(2) Prior to awarding a subcontract or other contractual instrument, ensure that the subcontractor has a current CMMC certificate or current CMMC status at the CMMC level that is appropriate for the information that is being flowed down to the subcontractor based on the requirements at 32 CFR 170.23.

(End of clause)

252.211-7003 Item Unique Identification and Valuation. (Jan 2023)

ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)

(a) . As used in this clause- Definitions

"Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

"Concatenated unique item identifier" means-

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.

"Data matrix" means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022.

"Data qualifier" means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

"DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at . https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html

"DoD item unique identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

" Enterprise " means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

" Enterprise identifier" means a code that is uniquely assigned to an enterprise by an issuing agency.

"Government's unit acquisition cost" means-

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery.

"Issuing agency" means an organization responsible for…