N0016726Q1055 CSS.pdf

This is a combined synopsis/solicitation for commercial items prepared in accordance with Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice. Naval Surface Warfare Center Carderock Division (NSWCCD) intends to award a firm fixed price (FFP) purchase order using Simplified Acquisition Procedures. The Government intends to solicit for a Photocentric (or equivalent) SLA Machine as detailed in the attached solicitation. This announcement constitutes the only solicitation and a written solicitation will not be issued.

Quotes are being requested under Request for Quotation (RFQ) N0016726Q1055

This is procurement IS set aside for small business. The NAICS code is 333248 and the Small Business Standard is 750 Employees.

The provisions and clauses included and/or incorporated in this solicitation document are those in effect through the Federal Acquisition Circular. This RFQ incorporates all provisions and clauses in effect through Federal Acquisition Circular FAC 2026-01 and the Defense Federal Acquisition Regulation Supplement (DFARS) DPN 20251110. SEE ATTACHED SOLICITATION FOR CLAUSES AND PROVISIONS.

The Government intends to award a Firm Fixed Price (FFP) contract resulting from this solicitation to the responsible quoter whose quote, conforming to the solicitation that will be most advantageous to the Government, price and other factors considered. The Government intends to evaluate all timely quotes received from eligible quoters on a lowest price technically acceptable (LPTA) basis. The Government intends to evaluate quotations and award a contract without discussions with quoters. The Government reserves the right to conduct discussions if the Contracting Officer later determines them to be necessary.

Evaluation Factors (See 52.212-2- Evaluation—Commercial Products and Commercial Services)

Questions/clarification regarding this solicitation must be submitted via email to tracy.l.mcdonough2.civ@us.navy.mil by 10:00 AM EDT on Thursday, 19 March 2026. All questions received before this deadline will be answered in an amendment to the solicitation.

Quote packages are due on or before 10:00 AM EDT on Monday, 23 March 2026. Responses shall include Official Company Name, Cage Code, and Point of Contact name & phone number. Each response must clearly indicate the capability of the quoter to meet all specifications and requirements.

The Point of Contact for this acquisition is Tracy McDonough tracy.l.mcdonough2.civ@us.navy.mil

Solicitation/Contract Form Continuation

Photocentric LC Titan SLA Machine or Equivalent

N0016726Q1055

Continuation of Supplies or Services and Prices/Costs

Additional Information/Notes

Item Supplies/Service Quantity Unit Unit Price Amount

One (1) Photocentric LC Titan Machine or equivalent type machine meeting or exceeding the identified minimum specifications

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

Preferred Manufacturer: Photocentric Pricing Arrangement: Firm Fixed Price

1 Each

One (1) Photocentric Titan Wash XL enclosure or equivalent type machine meeting or exceeding the identified minimum specifications

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

Preferred Manufacturer: Photocentric Pricing Arrangement: Firm Fixed Price

1 Each

One (1) Photocentric Titan Cure XL enclosure or equivalent type machine meeting or exceeding the identified minimum specifications

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

Preferred Manufacturer: Photocentric Pricing Arrangement: Firm Fixed Price

1 Each

LC Titan Starter Kit supplies or equivalent supplies meeting or exceeding the identified minimum specifications

Preferred Manufacturer: Photocentric Pricing Arrangement: Firm Fixed Price

1 Each

Photocentric Studio Pro Software or equivalent print job preparation software meeting or exceeding the identified minimum specifications

Preferred Manufacturer: Photocentric Pricing Arrangement: Firm Fixed Price

1 Each

LC Titan Platform Handler or equivalent platform handler for quoted machine meeting or exceeding the identified minimum specifications

Preferred Manufacturer: Photocentric Pricing Arrangement: Firm Fixed Price

1 Each

1 Year Service and Support Plan in accordance with the minimum specifications.

Pricing Arrangement: Firm Fixed Price

1 Lot

Equipment installation, commissioning, and end-user introduction in accordance with the minimum specifications.

Pricing Arrangement: Firm Fixed Price

1 Lot

Continuation of Description No terms will be incorporated into any price quote and/or order accepted by the Government unless otherwise agreed to by all parties in writing. Any and all terms and conditions contained in any price quote and/or order that violate any Federal laws, statutes, and regulations, including but not limited to, the Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS) are void and will have no effect. The applicable Federal laws, statutes, and regulations, including, but not limited to, the FAR and DFARS will govern instead.

MINIMUM SPECIFICATIONS

Photocentric LC Titan or Equivalent

1. SCOPE:

The Naval Surface Warfare Center, Carderock Division (NSWCCD), requires the purchase of one (1) LCD-based, Top-Down SLA machine with Supporting Wash, Cure Station, Platform Handler, Part Preparation Software, and Starter Supplies. Additionally, NSWCCD requires equipment delivery, installation and anintroduction to functionality and use of machines and workflow. This procurement of modern SLA machines will bring new technology and capabilities to our Additive Manufacturing Fabrication Facility, replacing older, problematic, and expensive SLA machines currently in use. The new system would provide an overall process capability to make larger scale parts faster and more affordable than the previous machines and methods used.

2. TASK:

The contractor shall install and commission one Photocentric LC Titan machine and associated equipment at NSWCCD, West Bethesda, MD.

The contractor shall include all basic system hardware and software per section 3.0 below and include incidental services to include delivery, installation, set-up, operational verification, as well as basic user operational training as detailed below. The equipment must be the below specified equipment or equivalent.

: 3. MINIMUM SPECIFICATIONS

The contractor shall provide the following equipment:

One (1) Photocentric LC Titan Machine or equivalent type machine meeting or exceeding the following specifications:

- Top-Down, LCD Light Sourced, Stereolithography (SLA) machine

- Build volume of 695 x 385 x 1200mm or greater

- 8K LCD screen

- Print layer thickness 100-350 um

- Print speed <= 86mm/hr or greater

- 13" HMI Control Panel

- Automated resin control system, with auto vat fill and empty functions or equivalent One (1) Titan Wash XL enclosure type machine meeting or exceeding the following specifications:

- Enclosure designed and sized for holding the above machine's specific top-down full capacity build platform on a motorized, slowly rotating mechanism

- Internal, pump-assisted, hand-held solvent rinse down hose capability

- Water connection for internal water rinse down hose capability

- External air connection for internal blow-drying capability

- External duct exhaust hookup

- Bottom drain with motorized pump out capability

One (1) Titan Cure XL enclosure or equivalent type machine meeting or exceeding the following specifications:

- Enclosure designed and sized for holding the above machine's specific top-down full capacity build platform on a motorized, slowly rotating mechanism

- Large format UV cure unit capable of broad-spectrum UV exposure, particularly at 460nm.

- Additional floor-mounted turntable

- Large capacity enclosure designed to fit full LC Titan platforms

- External duct exhaust hookup

LC Titan Starter Kit supplies or equivalent supplies required for the quoted machine:

- Initial materials needed for immediate use after delivery and installation

Photocentric Studio Pro Software or equivalent print job preparation software designed for quoted SLA machine providing the following capabilities, at a minimum:

- Lattice auto-support algorithm for support material generation

- Ability to generate drain holes, hollowing and infill

- Surface and orientation analysis

LC Titan Platform Handler or equivalent platform handler for quoted machine:

- Rollable hand winch lift designed and sized for holding the above machine's specific top-down full capacity build platform with drip tray

One Year Service and Support Plan to include:

- Unlimited technical support via phone or email for an unlimited number of users

- Remote support with maintenance tasks

- Remote assistance with troubleshooting print issues

- On-Site service and repairs

4. OBJECTIVE:

The contractor shall provide the following services:

3.1.1 On-Site installation, hookup and calibration of all equipment

3.1.2 Ensure proper operation and functionality of equipment to perform their respective jobs

3.1.3 On-Site End-User Equipment Introduction to include:

3.1.3.1 Introducing personnel to process, operations, proper maintenance of all equipment

3.1.3.2 Demonstrate software operation and workflow, including file preparation, design considerations and design for manufacturing

3.1.3.3 Introduction of material capabilities

3.1.3.4 Discuss process limitations and constraints

5. SPECIAL QUALIFICATIONS:

Contractor shall be approved and qualified Original Equipment Manufacturer reseller, installer and trainer on system operation.

6. DELIVERABLES:

The contractor shall provide deliverables as described in the PWS/SOW and CDRLs. Format and delivery schedule for deliverables will be outlines in the CDRLs.

Number Name

A001 Installation Schedule

A002 Work Milestones

7. PERIOD OF PERFORMANCE & DELIVERY REQUIREMENTS:

All work shall be completed by 30 June 2026

FOB Destination:

Naval Surface Warfare Center, Carderock Division

ATTN: Shipping/Receiving (Bldg. 143)

9500 MacArthur Blvd.

West Bethesda, MD 20817

8. SECURITY REQUIREMENTS:

The contractor shall be able to be approved for DoD installation access by the security office (i.e. personnel shall be a US citizen and not have any felony convictions on their records). Contractor personnel must obtain the required identification badges and follow all security and safety regulations.

Contractor personnel shall comply with all local base/installation security procedures required to gain access to US Government facilities. All contractor equipment, personnel and vehicles are subject to inspection and search by US government security officials (or designated representatives) upon entry to any government owned and/or operated installations and facilities. The Government reserves the right to visit and inspect the Contractor's assets used in support of this requirement.

Base vehicle passes are required for all contractor employees privately owned vehicles requiring access to Government facilities for the performance of this contract.

The Government Points of Contact will coordinate with the contractor on obtaining access to the base facilities, in order to complete the work assigned under this contract.

9. GOVERNMENT POINTS OF CONTACT:

To be determined at time of award

Requirements Photocentric LC Titan SLA Machine or Equivalent

Continuation of Packaging and Marking

Continuation of Inspection and Acceptance

Overall Contract Inspection/Acceptance Locations

Inspection and Acceptance Location

Both Destination Instructions: Please contact TPOC upon delivery/completion for inspection and acceptance.

DoDAAC: N00167 CountryCode: USA

NSWC CARDEROCK

CARDEROCK DIVISION, 9500 MACARTHUR BOULEVARD

BETHESDA, MD 20817-5700

UNITED STATES

TBD, TPOC

Email: TBD Telephone: TBD

Inspection and Acceptance Location

Both Destination Instructions: Please contact TPOC upon delivery/completion for inspection and acceptance.

DoDAAC: N00167 CountryCode: USA

NSWC CARDEROCK

CARDEROCK DIVISION, 9500 MACARTHUR BOULEVARD

BETHESDA, MD 20817-5700

UNITED STATES

TBD, TPOC

Email: TBD Telephone: TBD

Inspection and Acceptance Location

Both Destination Instructions: Please contact TPOC upon delivery/completion for inspection and acceptance.

DoDAAC: N00167 CountryCode: USA

NSWC CARDEROCK

CARDEROCK DIVISION, 9500 MACARTHUR BOULEVARD

BETHESDA, MD 20817-5700

UNITED STATES

TBD, TPOC

Email: TBD Telephone: TBD

Inspection and Acceptance Location

Both Destination Instructions: Please contact TPOC upon delivery/completion for inspection and acceptance.

DoDAAC: N00167 CountryCode: USA

NSWC CARDEROCK

CARDEROCK DIVISION, 9500 MACARTHUR BOULEVARD

BETHESDA, MD 20817-5700

UNITED STATES

TBD, TPOC

Email: TBD Telephone: TBD

Inspection and Acceptance Location

Both Destination Instructions: Please contact TPOC upon delivery/completion for inspection and acceptance.

DoDAAC: N00167 CountryCode: USA

NSWC CARDEROCK

CARDEROCK DIVISION, 9500 MACARTHUR BOULEVARD

BETHESDA, MD 20817-5700

UNITED STATES

TBD, TPOC

Email: TBD Telephone: TBD

Inspection and Acceptance Location

Both Destination Instructions: Please contact TPOC upon delivery/completion for inspection and acceptance.

DoDAAC: N00167 CountryCode: USA

NSWC CARDEROCK

CARDEROCK DIVISION, 9500 MACARTHUR BOULEVARD

BETHESDA, MD 20817-5700

UNITED STATES

TBD, TPOC

Email: TBD Telephone: TBD

Inspection and Acceptance Location

Both Destination Instructions: Please contact TPOC upon delivery/completion for inspection and acceptance.

DoDAAC: N00167 CountryCode: USA

NSWC CARDEROCK

CARDEROCK DIVISION, 9500 MACARTHUR BOULEVARD

BETHESDA, MD 20817-5700

UNITED STATES

TBD, TPOC

Email: TBD Telephone: TBD

Inspection and Acceptance Location

Both Destination Instructions: Please contact TPOC upon delivery/completion for inspection and acceptance.

DoDAAC: N00167 CountryCode: USA

NSWC CARDEROCK

CARDEROCK DIVISION, 9500 MACARTHUR BOULEVARD

BETHESDA, MD 20817-5700

UNITED STATES

TBD, TPOC

Email: TBD Telephone: TBD

Continuation of Deliveries or Performance

Overall Contract Delivery Period

Contractor Destination

Line Item Delivery Schedule Quantity Address and POC Special Handling/Notes

Delivery Requested By Delivery Date 30 Jun 2026

1 Each Ship To DoDAAC: N00167 CountryCode: USA

NSWC CARDEROCK

CARDEROCK DIVISION BLDG 143, 9500

MACARTHUR BOULEVARD

BETHESDA, MD 20817-5700

UNITED STATES

TBD, TPOC

Email: TBD Telephone: TBD

FoB Details Contractor Destination

Delivery Requested By Delivery Date 30 Jun 2026

1 Each Ship To DoDAAC: N00167 CountryCode: USA

NSWC CARDEROCK

CARDEROCK DIVISION BLDG 143, 9500

MACARTHUR BOULEVARD

BETHESDA, MD 20817-5700

UNITED STATES

TBD, TPOC

Email: TBD Telephone: TBD

FoB Details Contractor Destination

Delivery Requested By Delivery Date 30 Jun 2026

1 Each Ship To DoDAAC: N00167 CountryCode: USA

NSWC CARDEROCK

CARDEROCK DIVISION BLDG 143, 9500

MACARTHUR BOULEVARD

BETHESDA, MD 20817-5700

UNITED STATES

TBD, TPOC

Email: TBD Telephone: TBD

FoB Details Contractor Destination

Delivery Requested By Delivery Date 30 Jun 2026

1 Each Ship To DoDAAC: N00167 CountryCode: USA

NSWC CARDEROCK

CARDEROCK DIVISION BLDG 143, 9500

MACARTHUR BOULEVARD

BETHESDA, MD 20817-5700

UNITED STATES

TBD, TPOC

FoB Details Contractor Destination

Email: TBD Telephone: TBD

Delivery Requested By Delivery Date 30 Jun 2026

1 Each Ship To DoDAAC: N00167 CountryCode: USA

NSWC CARDEROCK

CARDEROCK DIVISION BLDG 143, 9500

MACARTHUR BOULEVARD

BETHESDA, MD 20817-5700

UNITED STATES

TBD, TPOC

Email: TBD Telephone: TBD

FoB Details Contractor Destination

Delivery Requested By Delivery Date 30 Jun 2026

1 Each Ship To DoDAAC: N00167 CountryCode: USA

NSWC CARDEROCK

CARDEROCK DIVISION BLDG 143, 9500

MACARTHUR BOULEVARD

BETHESDA, MD 20817-5700

UNITED STATES

TBD, TPOC

Email: TBD Telephone: TBD

FoB Details Contractor Destination

Delivery Requested By Delivery Date 30 Jun 2026

1 Lot Ship To DoDAAC: N00167 CountryCode: USA

NSWC CARDEROCK

CARDEROCK DIVISION BLDG 143, 9500

MACARTHUR BOULEVARD

BETHESDA, MD 20817-5700

UNITED STATES

TBD, TPOC

Email: TBD Telephone: TBD

Delivery Requested By Delivery Date 30 Jun 2026

1 Lot Ship To DoDAAC: N00167 CountryCode: USA

NSWC CARDEROCK

CARDEROCK DIVISION BLDG 143, 9500

MACARTHUR BOULEVARD

BETHESDA, MD 20817-5700

UNITED STATES

TBD, TPOC

Email: TBD Telephone: TBD

Continuation of Accounting and Appropriation Data

Contract Clauses

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.204-21 Basic Safeguarding of Covered Contractor Information Systems. Nov 2021 52.204-13 System for Award Management Maintenance. Oct 2018 52.204-18 Commercial and Government Entity Code Maintenance. Aug 2020 52.212-4 Contract Terms and Conditions-Commercial Products and Commercial Services. Nov 2023

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support. Jan 2023 252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting. May 2024 252.239-7018 Supply Chain Risk. Dec 2022

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.

Jan 2023

252.223-7008 Prohibition of Hexavalent Chromium. Jan 2023 252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime. Jan 2023 252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region. Jun 2023 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. Dec 2018 252.232-7010 Levies on Contract Payments. Dec 2006 252.244-7000 Subcontracts for Commercial Products or Commercial Services. Nov 2023 252.246-7008 Sources of Electronic Parts. Jan 2023 252.203-7000 Requirements Relating to Compensation of Former DoD Officials. Sep 2011 252.203-7002 Requirement to Inform Employees of Whistleblower Rights. Dec 2022 252.247-7023 Transportation of Supplies by Sea. Oct 2024 252.204-7022 Expediting Contract Closeout. May 2021

252.209-7004 Subcontracting with Firms that are Owned or Controlled by the Government of a Country that is a State Sponsor of Terrorism.

May 2019

DFARS Clauses Incorporated by Full Text

252.232-7006 Wide Area WorkFlow Payment Instructions. (Jan 2023)

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

(a) As used in this clause- Definitions.

"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.

"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.

"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as Electronic invoicing.

authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) To access WAWF, the Contractor shall- WAWF access.

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice WAWF training.

Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/

(e) Document submissions may be via web entry, Electronic Data Interchange, or File Transfer WAWF methods of document submission.

Protocol.

(f) The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF payment instructions.

WAWF for this contract or task or delivery order:

(1) The Contractor shall submit payment requests using the following document type(s): Document type.

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items-

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

Invoice and Receiving Report (COMBO) Destination/Destination (D/D)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

Invoice and Receiving Report (COMBO) Destination/Destination (D/D)

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial financing, submit a commercial financing request.

(2) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

(3) The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF Document routing.

when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC N62825

Issue By DoDAAC N00167

Admin DoDAAC N00167

Inspect By DoDAAC N00167

Ship To Code N00167

Ship From Code ____

Mark For Code ____

Service Approver (DoDAAC) ____

Service Acceptor (DoDAAC) ____

Accept at Other DoDAAC ____

LPO DoDAAC ____

DCAA Auditor DoDAAC ____

Other DoDAAC(s) ____

(4) The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in Payment request.

accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F. Receiving report.

(g) WAWF points of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

Ademola Oriowo at 301-503-0809 or by email ademola.m.oriowo.civ@us.navy.mil

Or the NAVSEA Helpdesk at WAWFHQ@navy.mil

You may also contact the below SAP Coordinator:

Patricia Middleton patricia.l.middleton.civ@us.navy.mil

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of clause)

252.211-7003 Item Unique Identification and Valuation. (Jan 2023)

ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)

N0016726Q1055 mailto:ademola.m.oriowo.civ@us.navy.mil mailto:WAWFHQ@navy.mil mailto:patricia.l.middleton.civ@us.navy.mil

(a) . As used in this clause- Definitions

"Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

"Concatenated unique item identifier" means-

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.

"Data matrix" means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022.

"Data qualifier" means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

"DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at . https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html

"DoD item unique identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

" Enterprise " means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

" Enterprise identifier" means a code that is uniquely assigned to an enterprise by an issuing agency.

"Government's unit acquisition cost" means-

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery.

"Issuing agency" means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

"Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier.

"Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

" Lot or batch number" means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

"Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

"Original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

"Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

"Serial number within the enterprise identifier" means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

"Serial number within the part, lot, or batch number" means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

"Serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

"Serialization within the part, lot, or batch number" means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

"Type designation" means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

"Unique item identifier" means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

"Unique item identifier type" means a designator to indicate which method of uniquely identifying a part has been used. The current list of accepted unique item identifier types is maintained at .https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government's unit acquisition cost is $5,000 or more, except for the following line items:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

(ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in the Schedule or the following table:

Contract Line, Subline, or

Exhibit Line Item Number Item Description

(If items are identified in the Schedule, insert "See Schedule in this table.)

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number .____

(iv) Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storage for a Major Defense Acquisition Program as specified in Attachment Number .____

(v) Any item not included in (i), (ii), (iii), or (iv) for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology - International symbology specification - Data matrix; ECC200 data matrix specification.

(4) The Contractor shall ensure that- Data syntax and semantics of unique item identifiers.

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH

10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH

10.8.2 Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs) (Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology - Transfer Syntax for High Capacity Automatic Data Capture Media.

(5) . Unique item identifier

(i) The Contractor shall-

(A) Determine whether to-

Serialize within the enterprise identifier; (1)

Serialize within the part, lot, or batch number; or (2)

Use a DoD recognized unique identification equivalent (e.g. Vehicle Identification Number); and (3)

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number; DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only: original part, lot, or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.S. Military Property, latest version;

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and packages are machine readable and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.

(ii) The issuing agency code-

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1)(i), (ii), or (iv) of this clause or when item unique identification is provided under paragraph (c)(1)(v), in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) Enterprise identifier (if concatenated unique item identifier is used).

(5) Original part number (if there is serialization within the original part number).

(6) Lot or batch number (if there is serialization within the lot or batch number).

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(10) Government's unit acquisition cost.

(11) Unit of measure.

(12) Type designation of the item as specified in the contract schedule, if any.

(13) Whether the item is an item of Special Tooling or Special Test Equipment.

(14) Whether the item is covered by a warranty.

(e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1)(iii) of this clause or when item unique identification is provided under paragraph (c)(1)(v), the Contractor shall report as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.**

(4) Issuing agency code (if concatenated unique item identifier is used).**

(5) Enterprise identifier (if concatenated unique item identifier is used).**

(6) Original part number (if there is serialization within the original part number).**

(7) Lot or batch number (if there is serialization within the lot or batch number).**

(8) Current part number (optional and only if not the same as the original part number).**

(9) Current part number effective date (optional and only if current part number is used).**

(10) Serial number (if concatenated unique item identifier is used).**

(11) Description.

** Once per item.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area WorkFlow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/.

(2) Embedded items shall be reported by one of the following methods-

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http://dodprocurementtoolbox.com/site /uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number (fill in) , Unique Item Identifier Report for Embedded ____ Items, Contract Data Requirements List, DD Form 1423.

(g) . If the Contractor acquires by subcontract, any item(s) for which item unique identification is required in accordance with Subcontracts paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g), in the applicable subcontract(s), including subcontracts for commercial products or commercial services.

(End of clause)

Addendum to 52.212-4, Contract Terms and Conditions - Commercial Products and Commercial Services

Contract Terms and Conditions Required To Implement Statutes or Executive Orders — Commercial Products and Commercial Services

Addendum to Contract Clauses

Contract Clauses

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.203-12 Limitation on Payments to Influence Certain Federal Transactions. Jun 2020 52.237-2 Protection of Government Buildings, Equipment, and Vegetation. Apr 1984 52.204-19 Incorporation by Reference of Representations and Certifications. Dec 2014 52.232-39 Unenforceability of Unauthorized Obligations. Jun 2013 52.247-34 F.o.b. Destination. Jan 1991

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

252.225-7972 Prohibition on the Procurement of Foreign-Made Unmanned Aircraft Systems. (DEVIATION 2024-O0014)

Aug 2024 Deviation 2024-O0014 Aug 2024

252.204-7006 Billing Instructions-Cost Vouchers May 2023 252.204-7003 Control of Government Personnel Work Product. Apr 1992 252.225-7048 Export-Controlled Items. Jun 2013 252.243-7001 Pricing of Contract Modifications. Dec 1991 252.211-7008 Use of Government-Assigned Serial Numbers. Sep 2010 252.225-7001 Buy American and Balance of Payments Program. (Alternate III) Feb 2024 Alternate III Feb 2024 252.225-7002 Qualifying Country Sources as Subcontractors. Mar 2022 252.225-7012 Preference for Certain Domestic Commodities. Apr 2022 252.225-7013 Duty-Free Entry. Aug 2025

252.223-7006 Prohibition on Storage, Treatment, and Disposal of Toxic or Hazardous Materials.

Sep 2014

FAR Clauses Incorporated by Full Text

52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders - Commercial Products and Commercial Services.

(DEVIATION 2025-O0003 and 2025-O0004)

(Oct 2025) Deviation 2025-O0004 (Mar 2025)

Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Products and Commercial Services (MAR 2025) (DEVIATION 2025-O0003 and 2025-O0004)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (section 743 of Division E, Title VII, (Jan 2017) of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (Dec (Section 1634 of Pub. L. 115-91).2023)

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Section 889(Nov 2021) (a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations .(Nov 2015)

(5) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (31 U.S.C. 3903 and 10 U.S.C. 3801).(Mar 2023)

(6) 52.233-3, Protest After Award (31 U.S.C. 3553).(Aug 1996)

(7) 52.233-4, Applicable Law for Breach of Contract Claim (Public Laws 108-77 and 108-78 ( 19 U.S.C. 3805 note)).(Oct 2004)

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial

[ ] 52.203-6, Restrictions on Subcontractor Sales to the Government with (41 U.S.C. 4704 and 10 U.S.C. 4655).(1) (Jun 2020), Alternate I (Nov 2021)

[ ] 52.203-13, Contractor Code of Business Ethics and Conduct (41 U.S.C. 3509)).(2) (Nov 2021)

[ ] 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (Section 1553 of Pub. L. 111-(3) (Jun 2010) 5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

[ ] 52.203-17, Contractor Employee Whistleblower Rights (41 U.S.C. 4712); this clause does not apply to contracts of DoD, NASA, (4) (Nov 2023) the Coast Guard, or applicable elements of the intelligence community-see FAR 3.900(a).

[X] (5) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Pub. L. 109-282) ( 31 U.S.C. 6101 note).(Jun 2020)

[ ] [Reserved].(6)

[ ] 52.204-14, Service Contract Reporting Requirements (Pub. L. 111-117, section 743 of Div. C).(7) (Oct 2016)

[ ] 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Pub. L. 111-117, section 743 of Div. C).(8) (Oct 2016)

[X] (9) 52.204-27, Prohibition on a ByteDance Covered Application (Section 102 of Division R of Pub. L. 117-328).(Jun 2023)

[ ] 52.204-28, Federal Acquisition Supply Chain Security Act Orders-Federal Supply Schedules, Governmentwide Acquisition Contracts, and (10) Multi-Agency Contracts. (Pub. L. 115-390, title II).(Dec 2023)

[ ] (11)

52.204-30, Federal Acquisition Supply Chain Security Act Orders-Prohibition. (Pub. L. 115-390, title II).(i) (Dec 2023)

[ ] Alternate I of 52.204-30.(ii) (Dec 2023)

[X] (12) 52.209-6, Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded. ( 2025) (31 U.S.C. 6101 note).Jan

[ ] 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (41 U.S.C. 2313).(13) (Oct 2018)

[ ] [Reserved].(14)

[ ] 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award ( ) (15 U.S.C. 657a).(15) Oct 2022

[ ] 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns ( ) (if the offeror elects to waive the (16) Oct 2022 preference, it shall so indicate in its offer) (15 U.S.C. 657a).

[ ] [Reserved](17)

[X] (18)(i) 52.219-6, Notice of Total Small Business Set-Aside (Nov 2020) (15 U.S.C. 644).

[ ] Alternate I of 52.219-6.(ii) (Mar 2020)

[ ] (19)

52.219-7, Notice of Partial Small Business Set-Aside (15 U.S.C. 644).(i) (Nov 2020)

[ ] Alternate I of 52.219-7.(ii) (Mar 2020)

[ ] 52.219-8, Utilization of Small Business Concerns (15 U.S.C. 637(d)(2) and (3)).(20) ( )Jan 2025

[ ] (21)

52.219-9, Small Business Subcontracting Plan (15 U.S.C. 637(d)(4)).(i) ( )Jan 2025

[ ] Alternate I of 52.219-9.(ii) (Nov 2016)

[ ] Alternate II of 52.219-9.(iii) (Nov 2016)

[ ] Alternate III of 52.219-9.(iv) (Jun 2020)

[ ] Alternate IV of 52.219-9.(v) ( )Jan 2025

[ ] (22)

52.219-13, Notice of Set-Aside of Orders (15 U.S.C. 644(r)).(i) (Mar 2020)

[ ] Alternate I of 52.219-13.(ii) (Mar 2020)

[ ] 52.219-14, Limitations on Subcontracting ( ) (15 U.S.C. 657s).(23) Oct 2022

[ ] 52.219-16, Liquidated Damages-Subcontracting Plan (15 U.S.C. 637(d)(4)(F)(i)).(24) (Sep 2021)

[ ] 52.219-27, Notice of Set-Aside for, or Sole-Source Award to, Service-Disabled Veteran-Owned Small Business (SDVOSB) Concerns Eligible (25) Under the SDVOSB Program ( ) (15 U.S.C. 657f).Feb 2024

[X] (26)(i) 52.219-28, Postaward Small Business Program Rerepresentation (Jan 2025) (15 U.S.C. 632(a)(2)).

[ ] Alternate I of 52.219-28.(ii) (Mar 2020)

[ ] 52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns ((27) Oct ) (15 U.S.C. 637(m)).2022

[ ] 52.219-30, Notice of Set-Aside for, or Sole-Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned (28) Small Business Program ( ) (15 U.S.C. 637(m)).Oct 2022

[ ] 52.219-32, Orders Issued Directly Under Small Business Reserves (15 U.S.C. 644(r)).(29) (Mar 2020)

[ ] 52.219-33, Nonmanufacturer Rule (15 U.S.C. 637(a)(17)).(30) (Sep 2021)

[X] (31) 52.222-3, Convict Labor (E.O.11755).(Jun 2003)

[X] (32) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (E.O. 13126).(Jan 2025)

[ ] [Reserved](33)

[ ] [Reserved](34)

[X] (35)(i) 52.222-35, Equal Opportunity for Veterans (Jun 2020) (38 U.S.C. 4212).

[ ] Alternate I of 52.222-35.(ii) (Jul 2014)

[X] (36)(i) 52.222-36, Equal Opportunity for Workers with Disabilities (Jun 2020) (29 U.S.C. 793).

[ ] Alternate I of 52.222-36.(ii) (Jul 2014)

[X] (37) 52.222-37, Employment Reports on Veterans ( ) (38 U.S.C. 4212).Jun 2020

[ ] 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (E.O. 13496).(38) (Dec 2010)

[X] (39)(i) 52.222-50, Combating Trafficking in Persons (Nov 2021) (22 U.S.C. chapter 78 and E.O. 13627).

[ ] Alternate I of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).(ii) (Mar 2015)

[ ] (40) 52.222-54, Employment Eligibility Verification (Executive Order 12989). (Not applicable to the acquisition of commercially (Jan 2025) available off-the-shelf items or certain other types of commercial products or commercial services as prescribed in FAR 22.1803.)

[ ] (41)

52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (May 2008) ( 42 U.S.C. 6962(c)(3)(A)(ii)). (Not (i) applicable to the acquisition of commercially available off-the-shelf items.)

[ ] Alternate I of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)(ii) (May 2008)

[ ] 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (42 U.S.C. 7671, ).(42) (May 2024) et seq.

[ ] 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (42 U.S.C. 7671, ).(43) (May 2024) et seq.

[ ] 52.223-20, Aerosols (42 U.S.C. 7671, ).(44) (May 2024) et seq.

[ ] 52.223-21, Foams (42 U.S.C. 7671, ).(45) (May 2024) et seq.

[ ] 52.223-23, Sustainable Products and Services (MAR 2025) (DEVIATION 2025-O0004)) (7 U.S.C. 8102, 42 U.S.C. 6962, 42 U.S.C. 8259b, (46) and 42 U.S.C. 7671l).

[ ] (47)

52.224-3 Privacy Training (5 U.S.C. 552 a).(i) (Jan 2017)

[ ] Alternate I of 52.224-3.(ii) (Jan 2017)

[ ] (48)

52.225-1, Buy American-Supplies (41 U.S.C. chapter 83).(i) (Oct 2022)

[ ] Alternate I of 52.225-1.(ii) (Oct 2022)

[ ] (49)

52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, (i) (NOV 2023) 19 U.S.C. 4001 note, 19 U.S.C. chapter 29 (sections 4501-4732), Public Law 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.

[ ] Alternate I [Reserved].(ii)

[ ] Alternate II of 52.225-3.(iii) (Jan 2025)

[ ] Alternate III of 52.225-3.(iv) (Feb 2024)

[ ] Alternate IV (Oct 2022) of 52.225-3.(v)

[ ] 52.225-5, Trade Agreements (19 U.S.C. 2501, ., 19 U.S.C. 3301 note).(50) (NOV 2023) et seq

[X] (51) 52.225-13, Restrictions on Certain Foreign Purchases (E.O.'s, proclamations, and statutes administered by the Office of Foreign (Feb 2021) Assets Control of the Department of the Treasury).

[ ] 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National (52) Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. Subtitle A, Part V, Subpart G Note).

[ ] 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150).(53)

[ ] 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (42 U.S.C. 5150).(54) (Nov 2007)

[X] (55) 52.226-8, Encouraging Contractor Policies to Ban Text Messaging While Driving (E.O. 13513).(May 2024)

[ ] 52.229-12, Tax on Certain Foreign Procurements .(56) (Feb 2021)

[ ] 52.232-29, Terms for Financing of Purchases of Commercial Products and Commercial Services (41 U.S.C. 4505, 10 U.S.C. (57) (Nov 2021) 3805).

[ ] 52.232-30, Installment Payments for Commercial Products and Commercial Services (41 U.S.C. 4505, 10 U.S.C. 3805).(58) (Nov 2021)

[X] (59) 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (31 U.S.C. 3332).(Oct2018)

[ ] 52.232-34, Payment by Electronic Funds Transfer-Other than System for Award Management (Jul 2013) (31 U.S.C. 3332).(60)

[ ] 52.232-36, Payment by Third Party (31 U.S.C. 3332).(61) (May 2014)

[ ] 52.239-1, Privacy or Security Safeguards (5 U.S.C. 552a).(62) (Aug 1996)

[X] (63) 52.240-1, Prohibition on Unmanned Aircraft Systems Manufactured or Assembled by American Security Drone Act-Covered Foreign Entities (Sections 1821-1826, Pub. L. 118-31, 41 U.S.C. 3901 note prec.).(Nov 2024)

[ ] 52.242-5, Payments to Small Business…