Attachment 1- Minimum Requirements.pdf
PDF 718 KB Posted
- Solicitation number
- N0016725Q0052
About this file
This is a minimum requirements document outlining specifications for custom load cell washers needed by the Naval Surface Warfare Center Carderock Division (NSWCCD) Code 663 for UNDEX Dynamic measurements and testing, specifically supporting the "PMS397_SIB" funded "8L" program.
The requirement consists of two items: one CPDE (Configuration, Packaging and Documentation Effort) unit at $5,000 for engineering design work, and eight custom donut 50K load cells at $5,650 each. The load cells must meet specific dimensions of 1.5" ID, 3.25" OD, and 2" height with 50K capacity. Delivery is required within 90 days after contract award to NSWC Carderock in Bethesda, MD. The contractor must demonstrate capability to custom design, develop, and deliver the load cells according to Code 663 specifications.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| B03 NSWCCD Brand Name Justification_Redacted.pdf | ||
| N0016725Q0052.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Minimum Requirements – Custom Donut 50K ID=1.5” Load cell washer design and development
1.0 Background and Objectives
NSWCCD Code 663 performs research and development in the areas of UNDEX Dynamic measurements and testing. Code 663 also provides engineering and technical support to NAVSEA technical warrant holders, various program offices, and other Department of Defense (DOD) organizations. A particular program/ Test supported by Code 663 is the “PMS397_SIB” funded “8L” program. As part of this program, specific Load Cell Washers need to be designed and developed in support of the 8L Test Series. These specifically designed load cell will be installed on test fixtures in order to collect the most valid data for the sponsor/NAVY.
2.0 Minimum Requirements
ITEM # SER00505, Model: CPDE (configuration, packaging and documentation effort), quantity of 1 at a unit cost of $5000.00 and ITEM # SER00063, Model: Miscellaneous items;
quantity of 8 at a unit price of $5650.00.
SER00505 represents the “engineering effort to design, customize, document, create drawings, and create all SOPs to manufacture the products”. SER00063 is placeholder item number which represents the “Custom Donut 50K, 1.5” ID, load cell to meet 3.25” OD, 2” height, and 50K capacity” per NAVY (Code 663) engineer defined specs. The contractor will provide the following as outlined in the table below:
Part Number Description Quantity SER00505 FUTEK, Model: CPDE (Configuration, Packaging and Documentation Effort) 1 SER00063 Custom Donut 50K Load cell, ID=1.5”, OD=3.25 and height of 2” 8
3.0 Special Qualifications
The contractor must be able to custom design, develop and deliver 50K Load Cell Donut with specifications per Code 663 requirements.
4.0 Delivery Requirements
Upon award of contract, the contractor shall coordinate delivery specifics and delivery date with the Government TPOC on when to expect delivery of all components to the FOB destination, below.
4.1 Required Delivery Date (RDD)
The RDD for delivery is NLT 90 days after the contract award date.
4.2 FOB Destination
The contractor shall deliver the data acquisition system hardware to the destination below:
NSWC Carderock 9500 MacArthur Blvd.
Bethesda, MD 20817
File details come from the government source that posted it. Updated .