PP60001.pdf

PI 1002 FOR MORE INFORMATION, CALL OR WRITE:

PRODUCT INFORMATION SHEET

Polyester Release Peel Ply Fabric

STYLE: 56009

CODE: 60001

Code 60001 is designed for vacuum bag lay-up composites and metal-to-metal bonding structures. Code 60001, 100% polyester fiber melts at approximately 480°F (249°C) and is resistant to phenolic resin system degradation. The fabric leaves a medium surface impression for priming and secondary bonding. It is available in precision slit widths of less than 60 inches.

Code 60001 is available in:

FIN 060 - Natural - Scoured and Heat-Set finish FIN 061 - SRB - Super Release Blue -An inert, heat stabilized cross-linked polymer finish.

FIN 062 - I0 - International Orange for easy identification.

FIN 065 - VLP - Very Low Porosity finish (2.0-4.5 cfm/ft2)

Physical Metric Test Property Value Equivalent Method

Roll Width 60 in (min.) 152 cm ASTM-D-3774

Roll Length 300 yds (max.) 275 m

Weight 2.5 oz/yd2 (min.) 85 g/m2

ASTM-D-3776

Finished Count Warp 70 ends/in (min.) 28 ends/cm ASTM-D-3775 Fill 50 picks/in (min.) 19 picks/cm

Tensile Strength (Grab) Warp 155 lbs. (min.) 689 Newtons ASTM-D-5034-95 Fill 120 lbs. (min.) 534 Newtons

Thickness 0.0055 in ±.0005 in 0.140 mm ASTM-D-1777 pH 4.5-7.0 FTM-2811

Extractable Materials 0.5% (max.) ASTM-D-2257 (Petroleum Ether Method)

We believe the information contained in this bulletin is correct. No warranty of accuracy is implied, however, and the products and properties described herein are subject to change. The information is not to be construed as a license to operate under, nor is intended to suggest infringement of any existing patents.