N00167-21-Q-0112.pdf

This is a combined synopsis/solicitation for a commercial item prepared in accordance with the format in Federal Acquisition Regulation (FAR) Subpart

12.6, as supplemented with additional information included in this notice.

The propose purchase order is being solicited under a brand name. Naval Surface Warfare Center Carderock Division (NSWCCD) anticipates awarding a firm fixed price (FFP) purchase order using Simplified Acquisition Procedures in accordance with (IAW) the attached combined synopsis/solicitation No.

N00167-21-Q-0112. The NAICS code is 333249 and the business size is 500 employees. This request for quote (RFQ) incorporates all provisions and clauses in effect through Federal Acquisition Circular FAC 2020-06 and the

Defense Federal Acquisition Regulation Supplement (DFARS) DPN 202000016. See attached solicitation for clauses and provisions.

The NSWCCD will award a contract resulting from this solicitation to the responsible Quoter that submits the Lowest-Priced, Technically Acceptable

(LPTA) quote in response to this solicitation that represent the best value to the Government. See 52.212-2- EVALUATION. Questions/clarification regarding this solicitation must be submitted via email to michael.bonaiuto@navy.mil and michelle.r.knox@navy.mil no later than May 24, 2021 at 11:59AM. All questions will be answered in an amendment to the solicitation. Quote packages are due by June 02, 2021 by 11:59AM and must be submitted via e-mail.

Quote packages should contain a cover sheet that provides the following information:

a) Official Company Name;

b) Point of Contact including name and phone number;

c) Cage code/DUNS number.

mailto:michael.bonaiuto@navy.mil mailto:michelle.r.knox@navy.mil

N0016721Q0112

Section SF 1449 - CONTINUATION SHEET

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 3 Each 300 Series Workbench Pro

FFP

300 Series HFE300/NO ENCLOSURE-ETHERNET Workbench Pro, delivered to

Crane, IN.

FOB: Destination

BRAND NAME/SOLE SOURCE: BN

VENDOR PART NR: 100001575670-0030

PURCHASE REQUEST NUMBER: 1300905362

PSC CD: 1680

NET AMT

0002 6 Each HFE 300 1.0mm Nozzle Steel

FFP

HFE 300 1.0mm Nozzle Steel, delivered to Crane, IN.

FOB: Destination

BRAND NAME/SOLE SOURCE: BN

VENDOR PART NR: 100001575670-0030

0003 6 Each HFE 300 1.6mm Nozzle Steel

FFP

HFE 300 1.6mm Nozzle Steel, delivered to Crane, IN.

FOB: Destination

BRAND NAME/SOLE SOURCE: BN

VENDOR PART NR: 100001575670-0030

0004 6 Each HFE 300 2.4mm Nozzle Steel

FFP

HFE 300 2.4mm Nozzle Steel, delivered to Crane, IN.

FOB: Destination

BRAND NAME/SOLE SOURCE: BN

VENDOR PART NR: 100001575670-0030

0005 3 Each UV red coolant, 700ml

FFP

UV red coolant, 700ml, delivered to Crane, IN.

FOB: Destination

BRAND NAME/SOLE SOURCE: BN

VENDOR PART NR: 100001575670-0030

0006 3 Each HFE Thermistor

FFP

HFE Thermistor, delivered to Crane, IN.

FOB: Destination

BRAND NAME/SOLE SOURCE: BN

VENDOR PART NR: 100001575670-0030

0007 3 Each Bed Probe Mounting Bracket

FFP

Bed Probe Mounting Bracket, delivered to Crane, IN.

FOB: Destination

BRAND NAME/SOLE SOURCE: BN

VENDOR PART NR: 100001575670-0030

0008 3 Each BLTouch

FFP

BLTouch, delivered to Crane, IN.

FOB: Destination

BRAND NAME/SOLE SOURCE: BN

VENDOR PART NR: 100001575670-0030

0009 6 Each 2.3kg PETG

FFP

2.3kg PETG, delivered to Crane, IN.

FOB: Destination

BRAND NAME/SOLE SOURCE: BN

VENDOR PART NR: 100001575670-0030

0010 3 Each Extruder Extended Warranty

FFP

Extruder Extended Warranty, delivered to Crane, IN.

FOB: Destination

BRAND NAME/SOLE SOURCE: BN

VENDOR PART NR: 100001575670-0030

0011 3 Each 300 Series 2-Year Warranty

FFP

300 Series 2-Year Warranty, delivered to Crane, IN.

FOB: Destination

BRAND NAME/SOLE SOURCE: BN

VENDOR PART NR: 100001575670-0030

1001 3 Each OPTION 300 Series Workbench Pro

FFP

300 Series HFE300/NO ENCLOSURE-ETHERNET Workbench Pro, delivered to

Crane, IN.

FOB: Destination

BRAND NAME/SOLE SOURCE: BN

VENDOR PART NR: 100001575670-0030

1002 6 Each OPTION HFE 300 1.0mm Nozzle Steel

FFP

HFE 300 1.0mm Nozzle Steel, delivered to Crane, IN.

FOB: Destination

BRAND NAME/SOLE SOURCE: BN

1003 6 Each OPTION HFE 300 1.6mm Nozzle Steel

FFP

HFE 300 1.6mm Nozzle Steel, delivered to Crane, IN.

FOB: Destination

BRAND NAME/SOLE SOURCE: BN

1004 6 Each OPTION HFE 300 2.4mm Nozzle Steel

FFP

HFE 300 2.4mm Nozzle Steel, delivered to Crane, IN.

FOB: Destination

BRAND NAME/SOLE SOURCE: BN

1005 3 Each OPTION UV red coolant, 700ml

FFP

UV red coolant, 700ml, delivered to Crane, IN.

FOB: Destination

BRAND NAME/SOLE SOURCE: BN

1006 3 Each OPTION HFE Thermistor

FFP

HFE Thermistor, delivered to Crane, IN.

FOB: Destination

BRAND NAME/SOLE SOURCE: BN

1007 3 Each OPTION Bed Probe Mounting Bracket

FFP

Bed Probe Mounting Bracket, delivered to Crane, IN.

FOB: Destination

BRAND NAME/SOLE SOURCE: BN

1008 3 Each OPTION BLTouch

FFP

BLTouch, delivered to Crane, IN.

FOB: Destination

BRAND NAME/SOLE SOURCE: BN

1009 6 Each OPTION 2.3kg PETG

FFP

2.3kg PETG, delivered to Crane, IN.

FOB: Destination

BRAND NAME/SOLE SOURCE: BN

1010 3 Each OPTION Extruder Extended Warranty

FFP

Extruder Extended Warranty, delivered to Crane, IN.

FOB: Destination

BRAND NAME/SOLE SOURCE: BN

1011 3 Each OPTION 300 Series 2-Year Warranty

FFP

300 Series 2-Year Warranty, delivered to Crane, IN.

FOB: Destination

BRAND NAME/SOLE SOURCE: BN

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government

0002 Destination Government Destination Government

0003 Destination Government Destination Government

0004 Destination Government Destination Government

0005 Destination Government Destination Government

0006 Destination Government Destination Government

0007 Destination Government Destination Government

0008 Destination Government Destination Government

0009 Destination Government Destination Government

0010 Destination Government Destination Government

0011 Destination Government Destination Government

1001 Destination Government Destination Government

1002 Destination Government Destination Government

1003 Destination Government Destination Government

1004 Destination Government Destination Government

1005 Destination Government Destination Government

1006 Destination Government Destination Government

1007 Destination Government Destination Government

1008 Destination Government Destination Government

1009 Destination Government Destination Government

1010 Destination Government Destination Government

1011 Destination Government Destination Government

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 30-SEP-2022 3 N/A

FOB: Destination

0002 30-SEP-2022 6 N/A

0003 30-SEP-2022 6 N/A

0004 30-SEP-2022 6 N/A

0005 30-SEP-2022 3 N/A

0006 30-SEP-2022 3 N/A

0007 30-SEP-2022 3 N/A

0008 30-SEP-2022 3 N/A

0009 30-SEP-2022 6 N/A

0010 30-SEP-2022 3 N/A

0011 30-SEP-2022 3 N/A

1001 30-SEP-2022 3 N/A

1002 30-SEP-2022 6 N/A

1003 30-SEP-2022 6 N/A

1004 30-SEP-2022 6 N/A

1005 30-SEP-2022 3 N/A

1006 30-SEP-2022 3 N/A

1007 30-SEP-2022 3 N/A

1008 30-SEP-2022 3 N/A

1009 30-SEP-2022 6 N/A

1010 30-SEP-2022 3 N/A

1011 30-SEP-2022 3 N/A

CLAUSES INCORPORATED BY REFERENCE

52.202-1 Definitions JUN 2020

52.203-3 Gratuities APR 1984

52.203-6 Restrictions On Subcontractor Sales To The Government JUN 2020

52.203-6 Alt I Restrictions On Subcontractor Sales To The Government

(JUN 2020) -- Alternate I

OCT 1995

52.203-11 Certification And Disclosure Regarding Payments To

Influence Certain Federal Transactions

SEP 2007

52.203-12 Limitation On Payments To Influence Certain Federal

Transactions

JUN 2020

52.203-17 Contractor Employee Whistleblower Rights and Requirement

To Inform Employees of Whistleblower Rights

JUN 2020

52.203-18 Prohibition on Contracting With Entities That Require Certain

Internal Confidentiality Agreements or Statements--

Representation

JAN 2017

52.204-4 Printed or Copied Double-Sided on Postconsumer Fiber

Content Paper

MAY 2011

52.204-13 System for Award Management Maintenance OCT 2018

52.204-16 Commercial and Government Entity Code Reporting AUG 2020

52.204-18 Commercial and Government Entity Code Maintenance AUG 2020

52.204-19 Incorporation by Reference of Representations and

Certifications.

DEC 2014

52.204-22 Alternative Line Item Proposal JAN 2017

52.204-24 Representation Regarding Certain Telecommunications and

Video Surveillance Services or Equipment.

OCT 2020

52.209-7 Information Regarding Responsibility Matters OCT 2018

52.211-15 Defense Priority And Allocation Requirements APR 2008

52.212-1 Instructions to Offerors--Commercial Items JUN 2020

52.212-4 Contract Terms and Conditions--Commercial Items OCT 2018

52.217-5 Evaluation Of Options JUL 1990

52.219-6 Notice Of Total Small Business Set-Aside NOV 2020

52.219-33 Nonmanufacturer Rule MAR 2020

52.222-19 Child Labor -- Cooperation with Authorities and Remedies JAN 2020

52.225-25 Prohibition on Contracting with Entities Engaging in Certain

Activities or Transactions Relating to Iran-- Representation and Certifications.

JUN 2020

52.232-39 Unenforceability of Unauthorized Obligations JUN 2013

52.232-40 Providing Accelerated Payments to Small Business

Subcontractors

DEC 2013

52.242-13 Bankruptcy JUL 1995

52.246-2 Inspection Of Supplies--Fixed Price AUG 1996

52.247-34 F.O.B. Destination NOV 1991

252.203-7000 Requirements Relating to Compensation of Former DoD

Officials

SEP 2011

252.203-7002 Requirement to Inform Employees of Whistleblower Rights SEP 2013

252.204-7003 Control Of Government Personnel Work Product APR 1992

252.204-7008 Compliance With Safeguarding Covered Defense Information

Controls

OCT 2016

252.204-7009 Limitations on the Use or Disclosure of Third-Party

Contractor Reported Cyber Incident Information

OCT 2016

252.204-7012 Safeguarding Covered Defense Information and Cyber

Incident Reporting

DEC 2019

252.204-7015 Notice of Authorized Disclosure of Information for Litigation

Support

MAY 2016

252.204-7017 Prohibition on the Acquisition of Covered Defense

Telecommunications Equipment or Services -- Representation

DEC 2019

252.204-7018 Prohibition on the Acquisition of Covered Defense

Telecommunications Equipment or Services

JAN 2021

252.211-7008 Use of Government-Assigned Serial Numbers SEP 2010

252.213-7000 Notice to Prospective Suppliers on Use of Supplier

Performance Risk System in Past Performance Evaluations

SEP 2019

252.215-7013 Supplies and Services Provided by Nontraditional Defense

Contractors.

JAN 2018

252.223-7008 Prohibition of Hexavalent Chromium JUN 2013

252.225-7001 Buy American And Balance Of Payments Program-- Basic DEC 2017

252.225-7002 Qualifying Country Sources As Subcontractors DEC 2017

252.225-7031 Secondary Arab Boycott Of Israel JUN 2005

252.225-7048 Export-Controlled Items JUN 2013

252.231-7000 Supplemental Cost Principles DEC 1991

252.232-7003 Electronic Submission of Payment Requests and Receiving

Reports

DEC 2018

252.232-7010 Levies on Contract Payments DEC 2006

252.243-7001 Pricing Of Contract Modifications DEC 1991

252.244-7000 Subcontracts for Commercial Items JAN 2021

252.247-7023 Transportation of Supplies by Sea FEB 2019

CLAUSES INCORPORATED BY FULL TEXT

C-212-W002 COMMERCIAL SUPPLIER AGREEMENTS (NAVSEA) (MAR 2019)

(a) Commercial Supplier Agreement means End User License Agreement (EULA), Terms of Service (TOS), or similar legal instrument or agreement.

(b) Any Commercial Supplier Agreement must be provided in full text as part of a quote or offer without hyperlinks.

(c) The contract/order Schedule and Federal Acquisition Regulation (FAR) 52.212-4, Contract Terms and

Conditions—Commercial Items, shall take precedence over any conflicting provisions in a Commercial Supplier

Agreement.

(d) If any requirement in the Commercial Supplier Agreement conflicts with Federal law or regulations (see FAR

12.212(a)), the following shall apply:

(i) Any such requirement is unenforceable against the Government.

(ii) Neither the Government nor any Government authorized end user shall be deemed to have agreed to such requirement by virtue of it appearing in the Commercial Supplier Agreement. If the Commercial Supplier

Agreement is invoked through an “I agree” click box or other comparable mechanism (e.g., “click-wrap” or

“browse-wrap” agreements), execution does not bind the Government or any Government authorized end user to such requirement.

(iii) Any such requirement is deemed to be stricken from the Commercial Supplier Agreement.

(e) Automatic renewals. License Agreements will expire at end of the term identified in the Purchase

Order/Contract. Automatic renewals are not permitted and any such provision is void.

(f) Changes to the Commercial Supplier Agreement. Unilateral changes of the Commercial Supplier Agreement are impermissible and any requirement authorizing such changes is unenforceable. Changes must be in writing and executed by both parties to be effective.

(g) Third Part License (Embedded Software).

(i) The Contractor agrees that it has obtained all necessary licenses for the Government for any third party materials (including without limitation all Open Source licenses) provided within the product.

(ii) Contractor agrees that it complies with and shall continue to comply with all of its obligations under

Third Party Licenses (including without limitation all Open Source licenses) associated with any third party materials provided within each product.

(iii) To the extent that the Government’s use of the software products licensed herein is in compliance with the Contractor’s Commercial Supplier Agreement, the Government’s use will also be in compliance with any

Third Party Licenses.

(h) Audits. In lieu of any audit provisions in the Commercial Supplier Agreement, the Government agrees that, no more than once every twelve (12) months or within a reasonable time after a transfer, the Contractor shall, upon reasonable notice, have the right to require that the Government conduct an internal audit to ascertain and verify the number of licenses in use and to verify that the Government’s use of the product is in conformity with this

Agreement. The Government is not required to use any tools provided by the Contractor to conduct the audit and shall not be required to pay for any tools provided by the Contractor to conduct the audit. The results of any such audit shall be kept confidential.

If verification discloses that the Government’s use is not in conformity with this Agreement, the Government agrees to resolve any noncompliance by either removing or correcting the unlicensed installation and use of the software identified by the audit as not in conformity with this Agreement.

(i) Confidentiality. Commercial Supplier Agreements’ terms and the final contract pricing may not be deemed confidential. Other marked confidential information will be appropriately guarded.

(j) Assignment. The Government shall have the right, without the prior written consent of the Contractor or its authorized resellers, to assign, reassign, or transfer software licenses among Government employees or the

Government’s rights in the Contractor’s product to any governmental organization that is managed, operated, or controlled by the Government.

Such authorization includes sublicensing, and assignment or transfer among or between authorized users. In the event authorized users are reorganized or restructured such that their responsibilities and operations are transferred to another government agency, the agency shall have the right to assign the affected program licenses to a successor agency. The licensed agency and the successor agency agree to be bound to the

Commercial Supplier Agreement as modified. The transferee shall be bound by the license metrics and limitations in this license. Government shall complete any documentation required by the Contractor to facilitate the transfer of this license, and continuation of support shall be the responsibility of the transferee.

For the avoidance of doubt, any assignment or transfer of licenses of the Contractor’s products is also subject to all other terms of the Commercial Supplier Agreement, as well as the Contractor’s policies governing product dependencies and version compatibility. Reassignment does not require that the license be under maintenance or support in order to execute a transfer.

(k) Litigation. Any requirement insisting that the commercial supplier or licensor control any litigation arising from the government’s use of the contractor’s supplies or services is deleted and unenforceable.

(l) Equitable Remedies. Equitable remedies, injunctive relief, and binding arbitration requirements shall not be enforced unless explicitly authorized by agency guidance or statute.

(m) Venue. Any claim or dispute shall be resolved under the Contract Disputes Act and FAR 52.233-1. The forum for resolution of disputes and applicable statutes of limitation shall be governed by federal law.

(n) Applicable law. In accordance with FAR 52.233-4, United States law shall apply to resolve any claim of breach of this contract and such actions shall be handled in the applicable Federal court of jurisdiction.

(End of text)

G-232-H002 PAYMENT INSTRUCTIONS AND CONTRACT TYPE SUMMARY FOR PAYMENT

OFFICE (NAVSEA) (JUN 2018)

(a) The following table of payment office allocation methods applies to the extent indicated.

For Government Use Only

Contract/Order Payment

Clause

Type of Payment

Request

S u p p ly

S er v ic e

C o n st ru ct io n

Payment Office

Allocation Method

52.212-4 (Alt I), Contract

Terms and Conditions—

Commercial Items

52.216-7, Allowable Cost and Payment

52.232-7, Payments under

Time-and-Materials and

Labor-Hour Contracts

Cost Voucher X X N/A Line item specific proration. If there is more than one ACRN within a deliverable line or deliverable subline item, the funds will be allocated in the same proportion as the amount of funding currently unliquidated for each

ACRN on the deliverable line or deliverable subline item for which payment is requested.

52.232-1, Payments Navy

Shipbuilding

Invoice (Fixed

Price)

X N/A N/A Line Item specific by fiscal year. If there is more than one ACRN within a deliverable line or deliverable subline item, the funds will be allocated using the oldest funds. In the event of a deliverable line or deliverable subline item with two ACRNs with the same fiscal year, those amounts will be prorated to the available unliquidated funds for that year.

52.232-1, Payments;

52.232-2, Payments under

Fixed-Price Research and

Development Contracts;

52.232-3, Payments under

Personal Services Contracts;

52.232-4, Payments under

Transportation Contracts and

Transportation-Related

Services Contracts; and

52.232-6, Payments under

Communication Service

Contracts with Common

Carriers

Invoice X X N/A Line Item Specific proration. If there is more than one ACRN within a deliverable line or deliverable subline item, the funds will be allocated in the same proportion as the amount of funding currently unliquidated for each

ACRN on the deliverable line or deliverable subline item for which payment is requested.

Contract/Order Payment

Clause

Type of Payment

Request

S u p p ly

S er v ic e

C o n st ru ct io n

Payment Office

Allocation Method

52.232-5, Payments Under

Fixed-Price Construction

Contracts

Construction

Payment Invoice

N/A N/A X Line Item specific by fiscal year. If there is more than one ACRN within a deliverable line or deliverable subline item, the funds will be allocated using the oldest funds. In the event of a deliverable line or deliverable subline item with two ACRNs with the same fiscal year, those amounts will be prorated to the available unliquidated funds for that year.

52.232-16, Progress

Payments

Progress

Payment*

X X N/A Contract-wide proration. Funds shall be allocated in the same proportion as the amount of funding currently unliquidated for each ACRN. Progress Payments are considered contract level financing, and the “contract price” shall reflect the fixed price portion of the contract per FAR

32.501-3.

52.232-29, Terms for

Financing of Purchases of

Commercial Items;

52.232-30, Installment

Payments for Commercial

Items

Commercial Item

Financing*

X X N/A Specified in approved payment. The contracting officer shall specify the amount to be paid and the account(s) to be charged for each payment approval in accordance with FAR 32.207(b)(2) and

32.1007(b)(2).

52.232-32, Performance-

Based Payments

Performance-

Based Payments*

X X N/A Specified in approved payment. The contracting officer shall specify the amount to be paid and the account(s) to be charged for each payment approval in accordance with FAR 32.207(b)(2) and

32.1007(b)(2).

252.232-7002, Progress

Payments for Foreign

Military Sales Acquisitions

Progress

Payment*

X X N/A Allocate costs among line items and countries in a manner acceptable to the

Administrative Contracting Officer.

*Liquidation of Financing Payments. Liquidation will be applied by the payment office against those ACRNs which are identified by the payment instructions for the delivery payment and in keeping with the liquidation provision of the applicable contract financing clause (i.e., progress payment, performance-based payment, or commercial item financing).

(b) This procurement contains the following contract type(s):

Item Type*

CLIN 0001

through 0011

FP – Fixed Price and 1001 through 1011

G-242-H001 GOVERNMENT CONTRACT ADMINISTRATION POINTS-OF-CONTACT AND

RESPONSIBILITIES (NAVSEA) (OCT 2018)

(a) The Government reserves the right to administratively substitute any of the points of contact listed below at any time.

(b) The contracting officer is the only person authorized to change this contract or orders issued thereunder. The

Contractor shall not comply with any order, direction or request of Government personnel - that would constitute a change - unless it is issued in writing and signed by the Contracting Officer or is pursuant to specific authority otherwise included as part of this contract. If, in the opinion of the contractor, an effort outside the existing scope of this contract is requested, the contractor shall promptly comply with the Notification of Changes clause of this contract.

(c) The points of contact are as follows:

(i) The Procuring Contracting Officer (PCO) is:

Name: Michelle Siebeking-Knox

Address:

904 Corporate Lane

Chesapeake, VA 23200

Phone: (757) 410-0512

E-mail: michelle.r.knox@navy.mil

(ii) The Contract Specialist is:

Name: Michael Bonaiuto

Address:

9500 MacArthur Blvd.

Bethesda, MD 20817

Phone: (301) 227-0589

E-mail: michael.bonaiuto@navy.mil

(iii) The Administrative Contracting Officer (ACO) is:

Name: Michelle Siebeking-Knox

(d) The Technical Point of Contact (TPOC) is the contracting officer’s representative for technical matters when a

COR is not appointed. The TPOC is responsible for technical issues of contract administration, such as providing all items of Government Furnished Information (GFI), Government Furnished Material (GFM) and Government

Furnished Equipment (GFE) if specified in the contract as well as the inspection and acceptance of all contract deliverables.

The Technical Point of Contact (TPOC) is:

Name: [ * ]

Address:

[ *Street ]

[ *City, State, Zip ]

Phone: (Area Code) xxx- [xxxx];

E-mail: [ * ]

[ * ] To be completed at contract award

G-242-H002 HOURS OF OPERATION AND HOLIDAY SCHEDULE (NAVSEA) (OCT 2018)

(a) The policy of this activity is to schedule periods of reduced operations or shutdown during holiday periods.

Deliveries will not be accepted on Saturdays, Sundays or Holidays except as specifically requested by the [insert activity name]. All goods or services attempted to be delivered on a Saturday, Sunday or Holiday without specific instructions from the Contracting Officer or his duly appointed representative will be returned to the contractor at the contractor’s expense with no cost or liability to the U.S. Government.

(b) The federal Government observes the following holidays:

HOLIDAYS*

New Year's Day

Martin Luther King's Birthday

Presidential Inauguration Day (Washington DC metro area only)

President's Day

Memorial Day

Independence Day

Labor Day

Columbus Day

Veteran's Day

Thanksgiving Day

Christmas Day

* Except for the Presidential Inauguration Day, if the actual date falls on a Saturday, the holiday will be observed the preceding Friday. If the holiday falls on a Sunday, the observance shall be on the following Monday.

The actual date of observance for each of the above holidays, for a specific calendar year, may be obtained from the

OPM website at OPM.GOV or by using the following direct link: https://www.opm.gov/policy-data-oversight/snow-dismissal-procedures/federal-holidays/#url.

(c) Delayed Opening, Early Dismissal and Closure of Government Facilities. When a Government facility has a delayed opening, is closed or Federal employees are dismissed early (due to severe weather, security threat, security exercise, or a facility related problem) that prevents personnel from working, onsite contractor personnel regularly assigned to work at that facility shall follow the same reporting and/or departure directions given to Government personnel. The contractor shall not direct charge to the contract for such time off, but shall follow parent company policies regarding taking leave (administrative or other). Non-essential contractor personnel, who are not required to remain at or report to the facility, shall follow their parent company policy regarding whether they should go/stay home or report to another company facility. Subsequent to an early dismissal, delayed opening, or during periods of inclement weather, onsite contractors should monitor the OPM website as well as radio and television announcements before departing for work to determine if the facility is closed or operating on a delayed arrival basis.

(d) When Federal employees are excused from work due to a holiday or a special event (that is unrelated to severe weather, a security threat, or a facility related problem), on site contractors shall continue working established work hours or take leave in accordance with parent company policy. Those contractor employees who take leave shall not direct charge the non-working hours to the contract. Contractors are responsible for predetermining and disclosing https://www.opm.gov/policy-data-oversight/snow-dismissal-procedures/federal-holidays/#url https://www.opm.gov/policy-data-oversight/snow-dismissal-procedures/federal-holidays/#url their charging practices for early dismissal, delayed openings, or closings in accordance with the FAR, applicable cost accounting standards, and the company’s established policy and procedures. Contractors shall follow their disclosed charging practices during the contract period of performance, and shall not follow any verbal directions to the contrary. The Contracting Officer will make the determination of cost allowability for time lost due to facility closure in accordance with FAR, applicable Cost Accounting Standards, and the Contractor's established accounting policy and procedures.

(e) If you intend to visit the Contracts Office, it is advised that you call for an appointment at least 24 hours in advance.

(f) The hours of operation are as follows:

AREA FROM TO

Loading Dock 0800 1430

(g) All deliveries to the Receiving Officer shall be made Monday through Friday from 0800 hours to 1430 hours, local time. Deliveries will not be accepted after 1430. No deliveries will be accepted on federal government holidays.

G-242-W001 CONTRACT ADMINISTRATION FUNCTIONS (NAVSEA) (OCT 2018)

(a) In accordance with FAR 42.302(a) all functions listed are delegated to the ACO except the following items to be retained by the PCO:

N/A

(b) In accordance with FAR 42.302(b), the following additional functions are delegated to the ACO:

N/A

L-204-H003 NOTIFICATION OF USE OF NAVY SUPPORT CONTRACTORS FOR OFFICIAL CONTRACT

FILES (NAVSEA) (APR 2019)

(a) NAVSEA may use a contractor to manage official contract files hereinafter referred to as "the support contractor", including the official file supporting this procurement. These official files may contain information that is considered a trade secret, proprietary, business sensitive or otherwise protected pursuant to law or regulation, hereinafter referred to as “protected information”. File management services consist of any of the following:

secretarial or clerical support; data entry; document reproduction, scanning, imaging, or destruction; operation, management, or maintenance of paper-based or electronic mail rooms, file rooms, or libraries; and supervision in connection with functions listed herein.

(b) The cognizant Contracting Officer will ensure that any NAVSEA contract under which these file management services are acquired will contain a requirement that

(1) The support contractor not disclose any information;

(2) Individual employees are to be instructed by the support contractor regarding the sensitivity of the official contract files;

(3) The support contractor performing these services be barred from providing any other supplies and/or services, or competing to do so, to NAVSEA for the period of performance of its contract and for an additional three years thereafter unless otherwise provided by law or regulation; and,

(4) In addition to any other rights the offeror may have, it is a third party beneficiary who has the right of direct action against the support contractor, or any person to whom the support contractor has released or disclosed

Protected Information, for the unauthorized duplication, release, or disclosure of such Protected Information.

(c) Submission of a proposal will be considered as consent to NAVSEA's permitting access to any information, irrespective of restrictive markings or the nature of the information submitted, by its file management support contractor for the limited purpose of executing its file support contract responsibilities.

(d) NAVSEA may, without further notice, enter into contracts with other contractors for these services. Offerors are free to enter into separate non-disclosure agreements with the file support contractor. Contact the Procuring

Contracting Officer for contractor specifics. However, any such agreement will not be considered a prerequisite before information submitted is stored in the files or otherwise encumber the government.

(End of provision)

52.204-7 SYSTEM FOR AWARD MANAGEMENT (OCT 2018)

(a) Definitions. As used in this provision--

Electronic Funds Transfer (EFT) indicator means a four-character suffix to the unique entity identifier. The suffix is assigned at the discretion of the commercial, nonprofit, or Government entity to establish additional System for

Award Management records for identifying alternative EFT accounts (see subpart 32.11) for the same entity.

Registered in the System for Award Management (SAM) means that--

(1) The Offeror has entered all mandatory information, including the unique entity identifier and the EFT indicator, if applicable, the Commercial and Government Entity (CAGE) code, as well as data required by the Federal Funding

Accountability and Transparency Act of 2006 (see subpart 4.14) into SAM;

(2) The offeror has completed the Core, Assertions, and Representations and Certifications, and Points of Contact sections of the registration in SAM;

(3) The Government has validated all mandatory data fields, to include validation of the Taxpayer Identification

Number (TIN) with the Internal Revenue Service (IRS). The offeror will be required to provide consent for TIN validation to the Government as a part of the SAM registration process; and

(4) The Government has marked the record ``Active''.

Unique entity identifier means a number or other identifier used to identify a specific commercial, nonprofit, or

Government entity. See www.sam.gov for the designated entity for establishing unique entity identifiers.

(b)(1) An Offeror is required to be registered in SAM when submitting an offer or quotation, and shall continue to be registered until time of award, during performance, and through final payment of any contract, basic agreement, basic ordering agreement, or blanket purchasing agreement resulting from this solicitation.

http://www.sam.gov/

(2) The Offeror shall enter, in the block with its name and address on the cover page of its offer, the annotation

``Unique Entity Identifier'' followed by the unique entity identifier that identifies the Offeror's name and address exactly as stated in the offer. The Offeror also shall enter its EFT indicator, if applicable. The unique entity identifier will be used by the Contracting Officer to verify that the Offeror is registered in SAM.

(c) If the Offeror does not have a unique entity identifier, it should contact the entity designated at www.sam.gov for establishment of the unique entity identifier directly to obtain one. The Offeror should be prepared to provide the following information:

(1) Company legal business name.

(2) Tradestyle, doing business, or other name by which your entity is commonly recognized.

(3) Company physical street address, city, state, and Zip Code.

(4) Company mailing address, city, state and Zip Code (if separate from physical).

(5) Company telephone number.

(6) Date the company was started.

(7) Number of employees at your location.

(8) Chief executive officer/key manager.

(9) Line of business (industry).

(10) Company headquarters name and address (reporting relationship within your entity).

(d) Processing time should be taken into consideration when registering. Offerors who are not registered in SAM should consider applying for registration immediately upon receipt of this solicitation. See https://www.sam.gov for information on registration.

(End of Provision)

52.204-17 OWNERSHIP OR CONTROL OF OFFEROR (AUG 2020)

Commercial and Government Entity (CAGE) code means—

(1) An identifier assigned to entities located in the United States or its outlying areas by the Defense Logistics

Agency (DLA) Commercial and Government Entity (CAGE) Branch to identify a commercial or government entity by unique location; or

(2) An identifier assigned by a member of the North Atlantic Treaty Organization (NATO) or by the NATO Support and Procurement Agency (NSPA) to entities located outside the United States and its outlying areas that the DLA

Commercial and Government Entity (CAGE) Branch records and maintains in the CAGE master file. This type of code is known as a NATO CAGE (NCAGE) code.

https://www.sam.gov/

Highest-level owner means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

Immediate owner means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: Ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

(b) The Offeror represents that it [ ___ ] has or [ ___ ] does not have an immediate owner. If the Offeror has more than one immediate owner (such as a joint venture), then the Offeror shall respond to paragraph (c) and if applicable, paragraph (d) of this provision for each participant in the joint venture.

(c) If the Offeror indicates ``has'' in paragraph (b) of this provision, enter the following information:

Immediate owner CAGE code:

Immediate owner legal name: ___

(Do not use a ``doing business as'' name)

Is the immediate owner owned or controlled by another entity?:

[ ___ ] Yes or [ ___ ] No.

(d) If the Offeror indicates ``yes'' in paragraph (c) of this provision, indicating that the immediate owner is owned or controlled by another entity, then enter the following information:

Highest-level owner CAGE code:

Highest-level owner legal name:

(Do not use a ``doing business as'' name)

52.204-20 Predecessor of Offeror (AUG 2020)

Commercial and Government Entity (CAGE) code means--

(1) An identifier assigned to entities located in the United States or its outlying areas by the Defense Logistics

Agency (DLA) Commercial and Government Entity (CAGE) Branch to identify a commercial or government entity by unique location; or

(2) An identifier assigned by a member of the North Atlantic Treaty Organization (NATO) or by the NATO Support and Procurement Agency (NSPA) to entities located outside the United States and its outlying areas that the DLA

Commercial and Government Entity (CAGE) Branch records and maintains in the CAGE master file. This type of code is known as a NATO CAGE (NCAGE) code.

Predecessor means an entity that is replaced by a successor and includes any predecessors of the predecessor.

Successor means an entity that has replaced a predecessor by acquiring the assets and carrying out the affairs of the predecessor under a new name (often through acquisition or merger). The term “successor” does not include new offices/divisions of the same company or a company that only changes its name. The extent of the responsibility of the successor for the liabilities of the predecessor may vary, depending on State law and specific circumstances.

(b) The Offeror represents that it [____] is or [____] is not a successor to a predecessor that held a Federal contract or grant within the last three years.

(c) If the Offeror has indicated “is” in paragraph (b) of this provision, enter the following information for all predecessors that held a Federal contract or grant within the last three years (if more than one predecessor, list in reverse chronological order):

Predecessor CAGE code: ____ (or mark “Unknown”).

Predecessor legal name: ____.

(Do not use a “doing business as” name).

52.209-2 PROHIBITION ON CONTRACTING WITH INVERTED DOMESTIC CORPORATIONS--

REPRESENTATION (NOV 2015)

(a) Definitions. Inverted domestic corporation and subsidiary have the meaning given in the clause of this contract entitled Prohibition on Contracting with Inverted Domestic Corporations (52.209-10).

(b) Government agencies are not permitted to use appropriated (or otherwise made available) funds for contracts with either an inverted domestic corporation, or a subsidiary of an inverted domestic corporation, unless the exception at 9.108-2(b) applies or the requirement is waived in accordance with the procedures at 9.108-4.

(c) Representation. The Offeror represents that--

(1) It [ ___ ] is, [ ___ ] is not an inverted domestic corporation; and

(2) It [ ___ ] is, [ ___ ] is not a subsidiary of an inverted domestic corporation.

52.209-11 REPRESENTATION BY CORPORATIONS REGARDING DELINQUENT TAX LIABILITY OR A

FELONY CONVICTION UNDER ANY FEDERAL LAW (FEB 2016)

(a) As required by sections 744 and 745 of Division E of the Consolidated and Further Continuing Appropriations

Act, 2015 (Pub. L. 113-235), and similar provisions, if contained in subsequent appropriations acts, the Government will not enter into a contract with any corporation that--

(1) Has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, where the awarding agency is aware of the unpaid tax liability, unless an agency has considered suspension or debarment of the corporation and made a determination that suspension or debarment is not necessary to protect the interests of the Government; or

(2) Was convicted of a felony criminal violation under any Federal law within the preceding 24 months, where the awarding agency is aware of the conviction, unless an agency has considered suspension or debarment of the corporation and made a determination that this action is not necessary to protect the interests of the Government.

(b) The Offeror represents that--

(1) It is [ ] is not [ ] a corporation that has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability; and

(2) It is [ ] is not [ ] a corporation that was convicted of a felony criminal violation under a Federal law within the preceding 24 months.

52.212-2 EVALUATION--COMMERCIAL ITEMS

(a) Basis for Award

The Government has determined that an award to the responsible Quoter that submits the Lowest-Priced, Technically Acceptable (LPTA) quote in response to this solicitation will represent the best value to the

Government. Quotes will be evaluated to determine the LPTA quote based on the following factors:

Factor 1 Price

Factor 2 Technical Capability

A quote must be rated "ACCEPTABLE" for each non-price factor to be eligible for award. An "UNACCEPTABLE" rating for any non-price factor will result in the entire quote being rated "UNACCEPTABLE" overall; an overall rating of "UNACCEPTABLE" makes a quote ineligible for award. A quote must contain sufficient information to enable evaluators to determine acceptability; if there is insufficient information to determine acceptability of the quote, the quote will be rated “UNACCEPTABLE” overall. Each of the evaluation factors will be rated as set forth below. Technical tradeoffs will not be made and no additional credit will be given for exceeding acceptability.

The Government will evaluate the lowest priced quote for technical acceptability. If it is not acceptable, the

Government will evaluate the next lowest quote for technical acceptability, and so forth, to determine the lowest-priced, technically acceptable quote, at which point all evaluations will stop.

The Government reserves the right to request that the awardee reduce its total price, or adjust CLIN prices with no change to total price, in order to reduce administrative costs and avoid unnecessary burdens for the agency pursuant to FAR 13.002.

(b) Evaluation Factors

Factor 1: Price

Quotes must include a proposed price for each Contract Line Item Number (CLIN). The Government will determine prices by adding the total proposed price for all CLINS, including all options. Quotes will be ranked from lowest- to highest-priced.

Factor 2: Technical Capability

The Government will evaluate the lowest priced Quoter for acceptability of Technical Capability. If the quote is not found to be acceptable, the Government will evaluate the next lowest quote for acceptability of technical capability, and so forth, to determine the lowest-priced quote that is acceptable for Technical Capability, at which point evaluators will evaluate of the acceptability of that quoter’s Past Performance.

Technical Capability evaluations will result in one of the following ratings:

TABLE 1 - TECHNICAL RATINGS

Rating Description

Acceptable Quote clearly meets the minimum requirements of the solicitation.

Unacceptable Quote does not clearly meet the minimum requirements of the solicitation.

Minimum Requirements:

The following are the minimum requirements a quote must meet to be deemed acceptable for the Technical

Capability factor:

1) Matches the minimum specifications (see pages 10-11 of this solicitation) for each item.

2) Must propose a price for all items separately.

PRICE

Quoters responding to this solicitation are advised that, prior to award, the government may request quoters to submit information/data to support price reasonableness such as copies of paid invoices for the same or similar items, sales history for the same or similar items, price list with effective date and/or copies of catalog pages along with any applicable discounts.

QUESTIONS: Any questions in relation to this solicitation shall be submitted to Michael Bonaiuto by email at michael.bonaiuto@navy.mil and Michelle Siebeking-Knox by email at michelle.r.knox@navy.mil. The cut-off date for questions is May 24, 2021 at 11:59 AM (ET).

(c) Options. The Government will evaluate quotes for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s).

(d) Contract Award

The Government shall email a written notice of award to the successful quoter. Once an authorized representative of the successful quoter has signed the award, a binding contract is formed; the signature represents that the Quoter accepts all solicitation requirements, including terms and conditions, representations and certifications, and technical requirements. Please notify the Government that the contract has been signed by returning the signed contract via mail or email within 10 days of receiving the award notice.

52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL ITEMS (FEB 2021)

ALTERNATE I (OCT 2014)

The Offeror shall complete only paragraph (b) of this provision if the Offeror has completed the annual representations and certification electronically in the System for Award Management (SAM) accessed through https://www.sam.gov. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (v) of this provision.

(a) Definitions. As used in this provision--

"Covered telecommunications equipment or services" has the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

"Economically disadvantaged women-owned small business (EDWOSB) concern" means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program.

"Forced or indentured child labor" means all work or service—

(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or

(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.

"Highest-level owner" means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

"Immediate owner" means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: Ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

"Inverted domestic corporation," means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c).

"Manufactured end product" means any end product in product and service codes (PSCs) 1000-9999, except—

(1) PSC 5510, Lumber and Related Basic Wood Materials;

(2) Product or Service Group (PSG) 87, Agricultural Supplies;

(3) PSG 88, Live Animals;

(4) PSG 89, Subsistence;

(5) PSC 9410, Crude Grades of Plant Materials;

(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) PSC 9610, Ores;

https://www.sam.gov/

(9) PSC 9620, Minerals, Natural and Synthetic; and

(10) PSC 9630, Additive Metal Materials.

"Place of manufacture" means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

"Reasonable inquiry" has the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain

Telecommunications and Video Surveillance Services or Equipment.

"Restricted business operations" means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate—

(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;

(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;

(3) Consist of providing goods or services to marginalized populations of Sudan;

(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;

(5) Consist of providing goods or services that are used only to promote health or education; or

(6) Have been voluntarily suspended.

"Sensitive technology"—

(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically—

(i) To restrict the free flow of unbiased information in Iran; or

(ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and

(2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act

(50 U.S.C. 1702(b)(3)).

"Service-disabled veteran-owned small business concern"—

(1) Means a small business concern—

(i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and

(ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe…