17Q0034_sol_0003.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The solicitation is hereby amended to correct incorrect characteristics identified in the description for CLIN 0001. This amendment also adds the follow ing clauses: 52.204-17, 52.204-18, 52.204-20, 52.211-2, 52.222-35, 52.222-37, 52.225-1, 252.204-7009, 252.227-7015, 252.227-7028, 252.227-7030, 252.227-7037, 252.204-7000. This amendment also removes the follow ing clauses: 52.204-12, 252.215-7007, 252.215-7008, 252.225-7013, 252.246-7006, 252.247-7023 Alt I, and 252.247-7023 Alt II. The offer due date is extended to 29 June 2017 at

12:00PM ET.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 4

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 12-Jun-2017

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X N0016417Q0034

X 9B. DATED (SEE ITEM 11)

08-May-2017

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

12-Jun-2017

CODE

NAVAL SURFACE WARFARE CENTER CRANE DIV

J. SHEPHERD (812-854-3860)

BLDG 121

300 HWY 361

CRANE IN 47522-5001

N00164 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

N0016417Q0034

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SECTION 4.0 - CLAUSES & OTHER FULL TEXT INFORMATION

SUMMARY OF CHANGES

SECTION 1.0 - SCHEDULE/INSPECTION & ACCEPTANCE/DELIVERY

The required response date/time has changed from 14-Jun-2017 12:00 PM to 29-Jun-2017 12:00 PM.

CLIN 0001

The CLIN extended description has changed from:

Cutting table should be capable of cutting 39 to 52 inch wide fiberglass, quartz or carbon fiber fabric impregnated with epoxy type resins. Cutting Table Useable Width: 52” minimum to 72” maximum Cutting Table Useable Length: 60” inches minimum” to 98” maximum Cutting Table Overall Maximum Width and Length: 78”W X 120” L (does not include controls/computer work station.) Cutting Surface: Cutting surface should be replaceable when worn. Vacuum System: The cutting table shall include a vacuum system capable of holding a single ply of pre-impregnated cloth in place during cutting operations. Vacuum System Control: Valves or blast gates shall be provided to control table vacuum. Blades: Blades for cutting quartz and carbon fiber shall be provided. Rolling and Tangential type blades shall be provided. Computer Control: Computer and controls shall be provided to operate the cutting table. Computer operating system: Computer operating system shall be Windows 10. Software: Software shall be provided for operator interface with the machine controller. Software shall include toolpath generation and pattern nesting functions and shall be Windows 10 compatible. Power: The cutting table (including vacuum system motor, computer and controller) shall operate on available 120/208V 30 Amp 3 phase power and 115 volt 15 amp single phase power.

To:

-Cutting table should be capable of cutting 52” wide rolls of fiberglass, quartz or carbon fiber fabric impregnated with epoxy resins-Cutting Table Useable Width: 52” minimum to 72” maximum-Cutting Table Useable Length: 72” minimum to 120” maximum-Cutting Table Overall Maximum Width and Length: 78”W X 144” L (does not include controls/computer work station.)-Cutting Surface: Cutting surface should be replaceable when worn.-Vacuum System: The cutting table shall include a vacuum system capable of holding a single ply of pre-impregnated cloth in place during cutting operations.-Vacuum System Control: Valves or blast gates shall be provided to control table vacuum.-Blades: Blades for cutting quartz and carbon fiber shall be provided. Rolling and Tangential type blades shall be provided.-Computer Control: Computer and controls shall be provided to operate the cutting table.- Computer operating system: Computer operating system shall be Windows 10.-Software: Software shall be provided for operator interface with the machine controller. Software shall include toolpath generation and pattern nesting functions and shall be Windows 10 compatible.-Power: The cutting table (including vacuum system motor, computer and controller) shall operate on available 120/208V 30 Amp 3 phase power and 115 volt 15 amp single phase power.

CLIN 0002

The CLIN extended description has changed from:

Technical Data Requirements for CLIN 0001 in accordance with CDRL A001.

To:

Technical Data Requirements for CLIN 0001 in accordance with CDRL A001.Not Separately Priced (NSP)

SECTION 3.0 - CLAUSES BY REFERENCE

The following have been added by reference:

52.204-18 52.211-2 52.222-35 52.222-37 52.225-1 252.204-7009 252.227-7015 252.227-7028 252.227-7030 252.227-7037

The following have been deleted:

52.204-12 252.225-7013 252.246-7006 252.247-7023 Alt I 252.247-7023 Alt II

SECTION 4.0 - CLAUSES & OTHER FULL TEXT INFORMATION

252.204-7000

SECTION 5.0 - INSTRUCTIONS & PROVISIONS

52.204-17

The following have been added by full text:

52.204-20 Predecessor of Offeror (JUL 2016)

(a) Definitions. As used in this provision--

Commercial and Government Entity (CAGE) code means--

(1) An identifier assigned to entities located in the United States or its outlying areas by the Defense Logistics Agency (DLA) Commercial and Government Entity (CAGE) Branch to identify a commercial or government entity;

or

(2) An identifier assigned by a member of the North Atlantic Treaty Organization (NATO) or by the NATO Support and Procurement Agency (NSPA) to entities located outside the United States and its outlying areas that the DLA Commercial and Government Entity (CAGE) Branch records and maintains in the CAGE master file. This type of code is known as a NATO CAGE (NCAGE) code.

Predecessor means an entity that is replaced by a successor and includes any predecessors of the predecessor.

Successor means an entity that has replaced a predecessor by acquiring the assets and carrying out the affairs of the predecessor under a new name (often through acquisition or merger). The term “successor” does not include new offices/divisions of the same company or a company that only changes its name. The extent of the responsibility of the successor for the liabilities of the predecessor may vary, depending on State law and specific circumstances.

(b) The Offeror represents that it [____] is or [____] is not a successor to a predecessor that held a Federal contract or grant within the last three years.

(c) If the Offeror has indicated “is” in paragraph (b) of this provision, enter the following information for all predecessors that held a Federal contract or grant within the last three years (if more than one predecessor, list in reverse chronological order):

Predecessor CAGE code: ____ (or mark “Unknown”).

Predecessor legal name: ____.

(Do not use a “doing business as” name).

(End of provision)

The following have been deleted:

252.215-7007 252.215-7008

(End of Summary of Changes)