14TGP81_0001_att.docx

STATEMENT OF WORK

FOR THE

PROCUREMENT, DELIVERY, TRAINING, AND MAINTENANCE

OF COMPRESSION MOLDING PRESSES

16 JANUARY 2014

DISTRIBUTION STATEMENT A: Approved for public release; distribution unlimited.

Prepared by:

Naval Surface Warfare Center Crane Division Platform and Launch Systems Division, GXP Crane, IN 47522

STATEMENT OF WORK

FOR THE PROCUREMENT, DELIVERY, TRAINING, AND MAINTENANCE

OF COMPRESSION MOLDING PRESSES

1.0 SCOPE. This Statement of Work (SOW) sets forth the requirements for the procurement, delivery, installation, training, and maintenance services per the specifications herein of hydraulic compression molding presses for the Polymer Engineering & Underwater Sensors Branch, GXPS, Naval Surface Warfare Center (NSWC) Crane Division.

1.1 Background. Compression molding presses are required in the manufacture and repair of molded rubber products used on a variety of platforms and systems for the U.S. Navy.

2.0 APPLICABLE DOCUMENT. N/A

3.0 TASK REQUIREMENTS. The contractor(s) shall deliver compression molding presses per individual Delivery Orders (DOs) to the Government per the following specifications:

3.1 200-Ton Hydraulic Press. The following are the minimum salient characteristics and requirements for a 200-Ton Hydraulic Press:

3.2 75-Ton Hydraulic Press. The following are the minimum salient characteristics and requirements for a 75-Ton Hydraulic Press:

3.3 Equipment Diagrams and Manuals. The contractor shall provide electrical and hydraulic diagrams for each press upon delivery. The contractor shall provide the Government with operating manuals for each press upon delivery. (CDRL A001)

3.4 Shipment. The contractor shall ship each press to the following address:

Naval Surface Warfare Center Crane Division Roger Dickerhoof Building 41NE 300 Highway 361 Crane, IN 47522-5001 Tel: 812-854-1041

3.5 Installation. The contractor shall install each of the presses upon delivery. The contractor shall notify the Government five (5) days in advance of the delivery/installation. The contractor shall unload, move, set in place, and level each press. The Government will ensure the contractor has access to the installation location, ensure the proper utilities are in place and the final connection(s) to the facility are made, and ensure all preparations are made to facilitate these installations.

3.6 Training. The contractor shall provide training to Government employees on the operation and controller programming for each press by instructors qualified in their operation and maintenance. The training shall be conducted concurrently with the installation or within 1 to 2 weeks after the installation. The time and date of the training will be mutually agreed upon between the Government and the contractor. Training shall include hands-on instruction and all applicable training materials. Training materials shall be submitted to the Government at the time of the training. An estimated six (6) Government employees will require this training. (CDRL A002)

3.7 Maintenance Agreement. The contractor shall provide annual preventative maintenance service calls by technicians qualified in the repair and maintenance of each press for the 5-year life of the contract. The first preventative maintenance service calls will be one (1) year after the delivery of each press. The contractor shall notify the Government five (5) days prior to the service calls. The contractor shall provide 24/7 telephone technical support. The contractor shall provide on-site technical service calls and provide an on-site representative within three (3) days of Government notification of a repair or maintenance requirement. Travel expenses and all replacement parts shall be the responsibility of the contractor.

4.0 GOVERNMENT FURNISHED PROPERTY. There will be no Government furnished property to accomplish the tasking in this SOW.

5.0 DATA DELIVERABLES. All data deliverables shall be submitted to the referenced address stated on the DD Form 1423, Contract Data Requirements Lists (CDRLs). The contractor shall provide electrical and hydraulic diagrams and operating manuals for each press upon delivery.

CDRL: A001

DID Number: DI-MISC-80557 DID Title: Commercial Support Documentation (Electrical and Hydraulic Diagrams and Operating Manuals) Applicable SOW Paragraph: 3.3

CDRL: A002

DID Number: DI-MISC-80557 DID Title: Commercial Support Documentation (Training Materials) Applicable SOW Paragraph: 3.6

6.0 SPECIAL CONSIDERATIONS.

6.1 Security. Tasking under this SOW is unclassified.

6.3 Points of Contacts. The GXPS Technical Points of Contact for this contract are:

Roger Dickerhoof Code GXPS, Building 41NE