MWD Camera Replacement Project DWG.pdf
PDF 256 KB Posted
- Solicitation number
- W91QF424Q0026
About this file
This document appears to be a government file related to a project to replace security cameras at the 67th Military Working Dog Kennels at Fort Leavenworth. The government is seeking to replace existing Mobotix Q25 cameras that are at the end of life and add additional cameras as described in the Performance Work Statement (PWS). The solicitation number is W91QF424Q0026, and the contracting office is the Department of the Army Materiel Command Mission and Installation Contracting Command Fort Eustis.
The key details include: a site visit is scheduled for August 1st, with questions due by August 5th; the contractor is required to provide all new CAT6 network cabling, Power over Ethernet injectors, and install new cameras in protective raceways; and the contractor must test and certify the network cabling meets CAT6 standards. The file also includes a PDF drawing with technical details for the camera replacement and relocation requirements.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Replace existing camera and move ~18” towards the corner of the eave (sufficient to visually clear the rain gutter down spout.)
Add new camera, new network cable in protective raceway (emt o.k.) with 3’ flexible metallic whip connected to weather resistant “J” box.
Add new camera, new network cable in protective raceway (emt o.k.).
Conduit/Raceway may be surface mounted to facilitate installation.
Add new camera, new network cable in protective raceway (emt o.k.) with 3’ flexible metallic whip connected to weather resistant “J” box.
Replace existing camera, utilize existing network cable.
Replace existing camera, utilize existing network cable.
Contractor Provide all new network cabling (CAT 6) terminated in the existing communications room in a 24 / 48 port patch panel. Contrac-tor shall provide “Power Over Ethernet” injector as required to make the cameras functional. All network cable tested and certified meet-ing standards for CAT 6 data throughput standards.
2” to 3” Conduit (EMT o.k.) and junction boxes to feed new cables.
Note: This camera will need to be dropped down bellow the A/C Vent-ing and Lighting.
File details come from the government source that posted it. Updated .