MPEX-02-PKG-002.pdf

PDF 5 MB Posted Nov 10, 2025

Attached to: Fabrication of Internal Bore Support Components
Solicitation number: PR422442
Issued by: Department of Energy

About this file

Written by GovTribe AI · Nov 10, 2025

This document is an Engineering Drawing Package for Internal Bore Support for Helicon Magnets, part of the Material Plasma Exposure Experiment (MPEX) at Oak Ridge National Laboratory. The package contains 11 detailed engineering drawings for various components, including internal bore supports, support rails, alignment plates, washers, and spacers. The drawings are for Revision 0, dated October 2025, and were digitally signed by four individuals from the MPEX team. The components are primarily fabricated from materials such as stainless steel (SS 304 and SS 316), aluminum (Mic 6 and 6061), and alloy steel, with specific design tolerances and manufacturing notes including using water-soluble cutting fluid, ensuring components are clean, and using Loctite LB8013 anti-seize in threads. The total weight of the parts ranges from 0.08 lbs to 31.24 lbs, and the drawings are certified for construction.

View the file

Other files

File	Type	Posted
MPEX-12-PLAN-001 (1).pdf	PDF	Nov 10, 2025
RFP PR422442 - Solicitation Information.pdf	PDF	Nov 10, 2025

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

MPEX-02-PKG-002

Engineering Drawing Package for Internal Bore Support for Helicon Magnets

Material Plasma Exposure Experiment Oak Ridge National Laboratory

MATERIAL PLASMA EXPOSURE EXPERIMENT

(MPEX)

Engineering Drawing Package for

Internal Bore Support for Helicon Magnets

MPEX-02-PKG-002 R0

Total Pages: 15

The official record of this document is the electronic file located in the Enterprise Document and Record Management (EDRM).

A controlled copy is provided on the network.

It is the user’s responsibility to verify that work is being performed using the latest revision.

PACKAGE REVISION HISTORY

REVISION DATE DESCRIPTION OF REVISION

0 October 2025 Original Issue

REVISION 0 SIGNATURES

The signatures below affirm the text signatures in the attached drawings as indicated on the Package Drawing List (PDL).

Total Drawing Package Pages at time of signing: _15_______

Kirby Logan Date

Dustin Ottinger Date

David Vandergriff Date

Robert Duckworth Date

Kirby Logan Digitally signed by Kirby Logan Date: 2025.10.07 09:46:13 -04'00'

Dustin Ottinger Digitally signed by Dustin Ottinger Date: 2025.10.07 11:17:28 -04'00'

David H Vandergriff Digitally signed by David H Vandergriff Date: 2025.10.07 14:21:23 -04'00'

Robert Duckworth Digitally signed by Robert Duckworth Date: 2025.10.07 15:25:36 -04'00'

PACKAGE DRAWING LIST

DRAWING NUMBER REV DESCRIPTION

Pa ge s Controlling Drawing Pkg (if not this Drawings Pkg)

MPEX-02-DES-02-A021 0 INTERNAL BORE SUPPORT 1

MPEX-02-DES-02-A022 0 INTERNAL BORE SUPPORT 1

MPEX-02-DES-02-A023 0 INNER BORE SUPPORT, LIFTING 1

MPEX-02-DES-02-A024 0 CRADLE END SUPPORT 1

MPEX-02-DES-02-A025 0 SUPPORT RAIL, RIGHT 1

MPEX-02-DES-02-A026 0 SUPPORT RAIL, LEFT 1

MPEX-02-DES-02-A027 0 LARGE WASHER 1

MPEX-02-DES-02-A028 0 SMALL HOLE WASHER 1

MPEX-02-DES-02-A029 0 ALIGNMENT PLATE 1

MPEX-02-DES-02-A030 0 ALIGNMENT PLATE 1

MPEX-02-DES-02-A031 0 ALIGNMENT SPACER 1

7 6 5 4 3 2 18

MATERIAL PLASMA EXPOSURE EXPERIMENT

DEPARTMENT OF ENERGY UNDER U.S. GOVE RNMENT CONTRACT DE-AC05-00OR22725

OAK RIDGE NATIONAL LABORATORY

THIS DRAWING IS THE PROPERTY OF

OAK RIDGE, TENNESSEE

AS BUILT

CERTIFIED FOR

CONSTRUCTION

INFORMATION

ONLY

( )7.515

( )34.775

NEXT USED ASSEMBLIES

TBD

UNLESS OTHERWISE SPECIFIED

ALL DIMENSIONS ARE IN INCHES

DIMENSIONING AND TOLERANCING IN

ACCORDANCE WITH ASME Y14.5, 2018

APPROVALS

DESIGNER DATE

K.LOGAN 09/12/2025

DETAILER DATE

K.LOGAN 09/12/2025

CHECKER DATE

DO NOT SCALE DRAWING D.OTTINGER 09/12/2025

DEFAULT TOLERANCES

LINEAR ANGULAR

ENGINEER DATE

MPEX DEVICE

HELICON MAGNET

D.VANDERGRIFF 09/12/2025

QUALITY ENGINEER DATE

X.X ±.1 ±.5°

X.XX ±.01

X.XXX ±.005

N/A 09/12/2025

CONTROL ACCOUNT MANAGER DATE

INTERNAL BORE SUPPORT R.DUCKWORTH 09/12/2025

REMOVE ALL BURRS AND

BREAK SHARP EDGES:

SURFACE ROUGHNESS:

0.03 MAX

125 RMS

SIZE DRAWING NUMBER REV

D MPEX-02-DES-02-A021 0

THIRD ANGLE PROJECTION SCALE CAD MODEL SHEET

1:5 MPEX-02-DES-02-A022 1 of 1

MPEX GUIDE

THIS DRAWING PREPARED ON CREOMPEX-00-ENG-005

MODEL REV

NO REPRESENTATION OR WARRANTY, EXPRESSED OR IMPLIED, IS MADE AS TO THE ACCURACY, COMPLETENESS OR USEFULNESS OF THE INFORMATION OR STATEMENTS CONTAINED IN THESE DRAWINGS, OR THAT THE DISCLOSURE OF ANY INFORMATION, APPARATUS, METHOD OR PROCESS DISCLOSED IN THESE DRAWINGS MAY NOT INFRINGE PRIVATE RIGHTS OF OTHERS. NO LIABILITY IS ASSUMED WITH RESPECT TO THE USE OF, OR FOR DAMAGES RESULTING FROM THE USE OF, ANY INFORMATION, APPARATUS, METHOD OR PROCESS DISCLOSED IN THESE DRAWINGS. DRAWINGS MADE AVAILABLE FOR INFORMATION TO BIDDER ARE NOT TO BE USED FOR OTHER PURPOSES AND ARE TO BE RETURNED UPON REQUEST OF THE FORWARDING CONTRACTOR.

REVISIONS

DATECAMQLYENGCKDETDESDESCRIPTION OF CHANGEREV

09/12/2025RDNADVDOKLKLORIGINAL ISSUE0

DRAWING PACKAGE I.D.

MPEX-02-PKG-002

17.94 LBSPARTS LIST

TOTAL WEIGHT

MATERIAL / SPECIFICATION

VENDOR PART NUMBER

VENDOR

DESCRIPTIONPART NUMBERQTY

FIND

NO.

INTERNAL BORE SUPPORTMPEX-02-DES-02-A02211

ALLOW STEEL

INNER BORE_SUPPORT LIFTINGMPEX-02-DES-02-A02312

DESCRIPTION SYMBOL

CERTIFIED STAMP:

PLACE TO CERTIFY

INFORMATION ON DRAWING

IS ACCEPTABLE TO BUILD

FROM.

INFORMATION STAMP:

PLACE TO STATE DRAWING

IS FOR INFORMATION

ONLY, AND OTHER

DRAWINGS EXIST TO

MANUFACTURE FROM.

AS BUILT STAMP:

PLACE WHEN AS BUILT IN

THE FIELD APPLIES;

REQUIRES DRAWING

REVISION.

FLAG NOTE SYMBOL:

PLACED IN GENERAL

NOTES, BUT APPLIES TO

SPECIFC FEATURE ON

DRAWING.

INSPECTION SYMBOL:

PLACE NEXT TO A

CRITICAL FEATURE THAT

REQUIRES DOCUMENTATION

OF INSPECTION PRIOR TO

ASSEMBLY.

D W G

N O

M P E X D E S A

S H

O N:

-O ct -2

:4 4:

NOTES:

1.USE ONLY WATER SOLUBLE, NON-SULFUROUS CUTTING FLUID.

2. ALL COMPONENTS SHALL BE CLEAN, FREE OF DIRT,

GREASE, CUTTING FLUIDS.

3. USE LOCTITE LB8013 ANTI-SIEZE OR EQUIVALENT IN

THREADS.

SCALE 1:4

AS BUILT

CERTIFIED FOR

CONSTRUCTION

INFORMATION

ONLY

MATERIAL PLASMA EXPOSURE EXPERIMENT

DEPARTMENT OF ENERGY UNDER U.S. GOVE RNMENT CONTRACT DE-AC05-00OR22725

OAK RIDGE NATIONAL LABORATORY

THIS DRAWING IS THE PROPERTY OF

OAK RIDGE, TENNESSEE

AS BUILT

CERTIFIED FOR

CONSTRUCTION

INFORMATION

ONLY

( )22.2

( )34.4

( )6.0

NEXT USED ASSEMBLIES

MPEX-02-DES-02-A021

APPROVALS

DESIGNER DATE

K.LOGAN 09/12/2025

DETAILER DATE

K.LOGAN 09/12/2025

CHECKER DATE

DO NOT SCALE DRAWING D.OTTINGER 09/12/2025

DEFAULT TOLERANCES

LINEAR ANGULAR

ENGINEER DATE

MPEX DEVICE

HELICON MAGNET

D.VANDERGRIFF 09/12/2025

QUALITY ENGINEER DATE

X.X ±.1 ±.5°

X.XX ±.01

X.XXX ±.005

N/A 09/12/2025

CONTROL ACCOUNT MANAGER DATE

INTERNAL BORE SUPPORT R.DUCKWORTH 09/12/2025

REMOVE ALL BURRS AND

SIZE DRAWING NUMBER REV

D MPEX-02-DES-02-A022 0

THIRD ANGLE PROJECTION SCALE CAD MODEL SHEET

267:1600 MPEX-02-DES-02-A022 1 of 1

MPEX GUIDE

THIS DRAWING PREPARED ON CREOMPEX-00-ENG-005

MODEL REV

REVISIONS

DATECAMQLYENGCKDETDESDESCRIPTION OF CHANGEREV

09/12/2025RDNADVDOKLKLORIGINAL ISSUE0

DRAWING PACKAGE I.D.

MPEX-02-PKG-002

17.94 LBSPARTS LIST

TOTAL WEIGHT

MATERIAL / SPECIFICATION

VENDOR PART NUMBER

VENDOR

DESCRIPTIONPART NUMBERQTY

FIND

NO.

SS 304 (S30400)

CRADLE END SUPPORTMPEX-02-DES-02-A02421

SS 304 (S30400)

SUPPORT RAIL RIGHTMPEX-02-DES-02-A02512

SS 304 (S30400)

SUPPORT RAIL LEFTMPEX-02-DES-02-A02613

SS91944A480

WWW.MCMASTER.COM

5/8 LEVELING WASHERVMPEX-MMC-91944A48084

316 SS92488A495

WWW.MCMASTER.COM

3/8-16 X 1 1/4 LG. SHCSVMPEX-MMC-92488A49545

316 SS92290A535

WWW.MCMASTER.COM

M10 X 1.5MM X 50MM LG SHCSVMPEX-MMC-92290A53546

SS 304 (S30400)

LARGE WASHERMPEX-02-DES-02-A02747

SS 304 (S30400)

SMALL HOLE WASHERMPEX-02-DES-02-A02848

316 STAINLESS STEEL

RoHS COMPLIANT

92185A601

WWW.MCMASTER.COM

SHCS, 5/16-18 X 1.50 LG.VMPEX-MMC-92185A60149

STAINLESS STEEL

90666A019

WWW.MCMASTER.COM

1/4-20 LHSCS 1" LG.VMPEX-MMC-90666A019410

BRASS

92991A922

WWW.MCMASTER.COM

BRASS SET SCREWVMPEX-MMC-92991A922411

DESCRIPTION SYMBOL

CERTIFIED STAMP:

PLACE TO CERTIFY

INFORMATION ON DRAWING

IS ACCEPTABLE TO BUILD

FROM.

INFORMATION STAMP:

PLACE TO STATE DRAWING

IS FOR INFORMATION

ONLY, AND OTHER

DRAWINGS EXIST TO

MANUFACTURE FROM.

AS BUILT STAMP:

PLACE WHEN AS BUILT IN

THE FIELD APPLIES;

REQUIRES DRAWING

REVISION.

FLAG NOTE SYMBOL:

PLACED IN GENERAL

NOTES, BUT APPLIES TO

SPECIFC FEATURE ON

DRAWING.

INSPECTION SYMBOL:

PLACE NEXT TO A

CRITICAL FEATURE THAT

REQUIRES DOCUMENTATION

OF INSPECTION PRIOR TO

ASSEMBLY.

D W G

N O

M P E X D E S A

S H

O N:

-O ct -2

:4 4:

NOTES:

1.USE ONLY WATER SOLUBLE, NON-SULFUROUS CUTTING FLUID.

2. ALL COMPONENTS SHALL BE CLEAN, FREE OF DIRT,

GREASE, CUTTING FLUIDS.

3. USE LOCTITE LB8013 ANTI-SIEZE OR EQUIVALENT IN

THREADS.

SCALE 1:4

5 6

AS BUILT

CERTIFIED FOR

CONSTRUCTION

INFORMATION

ONLY

MATERIAL PLASMA EXPOSURE EXPERIMENT

DEPARTMENT OF ENERGY UNDER U.S. GOVE RNMENT CONTRACT DE-AC05-00OR22725

OAK RIDGE NATIONAL LABORATORY

THIS DRAWING IS THE PROPERTY OF

OAK RIDGE, TENNESSEE

AS BUILT

CERTIFIED FOR

CONSTRUCTION

INFORMATION

ONLY

( )10.19

( )34.75

DESCRIPTION SYMBOL

CERTIFIED STAMP:

PLACE TO CERTIFY

INFORMATION ON DRAWING

IS ACCEPTABLE TO BUILD

FROM.

INFORMATION STAMP:

PLACE TO STATE DRAWING

IS FOR INFORMATION

ONLY, AND OTHER

DRAWINGS EXIST TO

MANUFACTURE FROM.

AS BUILT STAMP:

PLACE WHEN AS BUILT IN

THE FIELD APPLIES;

REQUIRES DRAWING

REVISION.

FLAG NOTE SYMBOL:

PLACED IN GENERAL

NOTES, BUT APPLIES TO

SPECIFC FEATURE ON

DRAWING.

INSPECTION SYMBOL:

PLACE NEXT TO A

CRITICAL FEATURE THAT

REQUIRES DOCUMENTATION

OF INSPECTION PRIOR TO

ASSEMBLY.

D W G

N O

M P E X D E S A

S H

O N:

-O ct -2

:4 7:

NEXT USED ASSEMBLIES

MPEX-02-DES-02-A021

APPROVALS

DESIGNER DATE

K.LOGAN 09/12/2025

DETAILER DATE

K.LOGAN 09/12/2025

CHECKER DATE

DO NOT SCALE DRAWING D.OTTINGER 09/12/2025

DEFAULT TOLERANCES

LINEAR ANGULAR

ENGINEER DATE

MPEX DEVICE

HELICON MAGNET

D. VANDERGRIFF 09/12/2025

QUALITY ENGINEER DATE

X.X ±.1 ±.5°

X.XX ±.01

X.XXX ±.005

N/A 09/12/2025

CONTROL ACCOUNT MANAGER DATE

INNER BORE_SUPPORT LIFTING R. DUCKWOTH 09/12/2025

REMOVE ALL BURRS AND

SIZE DRAWING NUMBER REV

D MPEX-02-DES-02-A023 0

THIRD ANGLE PROJECTION SCALE CAD MODEL SHEET

267:1600 MPEX-02-DES-02-A023 1 of 1

MPEX GUIDE

THIS DRAWING PREPARED ON CREOMPEX-00-ENG-005

MODEL REV

REVISIONS

DATECAMQLYENGCKDETDESDESCRIPTION OF CHANGEREV

09/12/2025RDNADVDOKLKLORIGINAL ISSUE0

DRAWING PACKAGE I.D.

MPEX-02-PKG-002

23.56 LBSPARTS LIST

TOTAL WEIGHT

MATERIAL / SPECIFICATION

VENDOR PART NUMBER

VENDOR

DESCRIPTIONPART NUMBERQTY

FIND

NO.

ALU MIC 6

ALIGNMENT PLATEMPEX-02-DES-02-A02911

SS 316 (S31600)

1065000 www.thecrosbygroup.com

CROSBY 106500 SS SWIVEL HOIST

RING 5/16-18

VMPEX-CRO-106500012

STAINLESS STEEL

91251A247 www.mcmaster.com

10-24 X 1.0 SHCSVMPEX-MMC-91251A247123

STAINLESS STEEL

92141A011

WWW.MCMASTER.COM

NO 10 SS WASHERVMPEX-MMC-92141A011124

ALUM. 6061---

ADJUSTMENT BASEMPEX-02-DES-02-A03025

ALLOY STEEL

90044A170

WWW.MCMASTER.COM

1/2-13 X 6.0 LG. SHCSVMPEX-MMC-90044A17036

ALLOY STEEL

90044A139

WWW.MCMASTER.COM

5/16-18 X 2.0 LG. SHCSVMPEX-MMC-90044A13947

ALUM.6061

ADJUSTMENT SPACERMPEX-02-DES-02-A03148

DESCRIPTION SYMBOL

CERTIFIED STAMP:

PLACE TO CERTIFY

INFORMATION ON DRAWING

IS ACCEPTABLE TO BUILD

FROM.

INFORMATION STAMP:

PLACE TO STATE DRAWING

IS FOR INFORMATION

ONLY, AND OTHER

DRAWINGS EXIST TO

MANUFACTURE FROM.

AS BUILT STAMP:

PLACE WHEN AS BUILT IN

THE FIELD APPLIES;

REQUIRES DRAWING

REVISION.

FLAG NOTE SYMBOL:

PLACED IN GENERAL

NOTES, BUT APPLIES TO

SPECIFC FEATURE ON

DRAWING.

INSPECTION SYMBOL:

PLACE NEXT TO A

CRITICAL FEATURE THAT

REQUIRES DOCUMENTATION

OF INSPECTION PRIOR TO

ASSEMBLY.

D W G

N O

M P E X D E S A

S H

O N:

-O ct -2

:4 7:

NOTES:

1.USE ONLY WATER SOLUBLE, NON-SULFUROUS CUTTING FLUID.

2. ALL COMPONENTS SHALL BE CLEAN, FREE OF DIRT,

GREASE, CUTTING FLUIDS.

3. USE LOCTITE LB8013 ANTI-SIEZE OR EQUIVALENT IN

THREADS.

STEEL 1018SCALE 1:4

1 2

SCALE 1:4

AS BUILT

CERTIFIED FOR

CONSTRUCTION

INFORMATION

ONLY

MATERIAL PLASMA EXPOSURE EXPERIMENT

5 4

DEFAULT TOLERANCES

LINEAR ANGULAR

X.X ±.1 ±.5°

X.XX ±.01

X.XXX ±.005

REMOVE ALL BURRS AND

DO NOT SCALE DRAWING

DEPARTMENT OF ENERGY UNDER U.S. GOVE RNMENT CONTRACT DE-AC05-00OR22725

OAK RIDGE NATIONAL LABORATORY

THIS DRAWING IS THE PROPERTY OF

OAK RIDGE, TENNESSEE

AS BUILT

CERTIFIED FOR

CONSTRUCTION

INFORMATION

ONLY

22.22

6.2659.688

R16.1

6.02

2X ⌀.409

1.505

5.991

19.21

10.24

.56

2.11R13.4

2X 5.0° 2X 15.0°

5.26511.688

6.640

8.938

1.166 2.276

(R )13.4 (R )13.4

.500

2X .700

.375

.250

2X .625

4X R.250

D W G

N O

M P E X D E S A

S H

NEXT USED ASSEMBLIES

MPEX-02-DES-02-A022

APPROVALS

DESIGNER DATE

K.LOGAN 8/18/25

DETAILER DATE

K.LOGAN 8/18/25

CHECKER DATE

D.OTTINGER 8/15/25

ENGINEER DATE

MPEX DEVICE

HELICON MAGNETS

D.VANDERGRIFF 8/15/25

QUALITY ENGINEER DATE

N/A N/A

CONTROL ACCOUNT MANAGER DATE

CRADLE END SUPPORT R.DUCKWORTH 8/15/25

SIZE DRAWING NUMBER REV

D MPEX-02-DES-02-A024 0

THIRD ANGLE PROJECTION SCALE CAD MODEL SHEET

533:1600 MPEX-02-DES-02-A024 1 of 1

MPEX GUIDE

THIS DRAWING PREPARED ON CREOMPEX-00-ENG-005

MODEL REV

PART INFORMATION

WEIGHTMATERIAL / SPECIFICATIONDESCRIPTION

8.97 LBS

SS 304 (S30400) PRODEC OR EQUIVILANT

CRADLE END SUPPORT

REVISIONS

DATECAMQLYENGCKDETDESDESCRIPTION OF CHANGEREV

8/15/25RDNADVDOKLKLORIGINAL ISSUE0

DRAWING PACKAGE I.D.

MPEX-02-PKG-002

DESCRIPTION SYMBOL

CERTIFIED STAMP:

PLACE TO CERTIFY

INFORMATION ON DRAWING

IS ACCEPTABLE TO BUILD

FROM.

INFORMATION STAMP:

PLACE TO STATE DRAWING

IS FOR INFORMATION

ONLY, AND OTHER

DRAWINGS EXIST TO

MANUFACTURE FROM.

AS BUILT STAMP:

PLACE WHEN AS BUILT IN

THE FIELD APPLIES;

REQUIRES DRAWING

REVISION.

FLAG NOTE SYMBOL:

PLACED IN GENERAL

NOTES, BUT APPLIES TO

SPECIFC FEATURE ON

DRAWING.

INSPECTION SYMBOL:

PLACE NEXT TO A

CRITICAL FEATURE THAT

REQUIRES DOCUMENTATION

OF INSPECTION PRIOR TO

ASSEMBLY.

O N:

-O ct -2

:2 1:

⏥2X

NOTES:

1.USE ONLY WATER SOLUBLE, NON-SULFUROUS CUTTING FLUID.

2. ALL COMPONENTS SHALL BE CLEAN, FREE OF DIRT,

GREASE, CUTTING FLUIDS.

3. USE LOCTITE LB8013 ANTI-SIEZE OR EQUIVALENT IN

THREADS.

4. MACHINE CRADLE END SUPPORTS PAIRS AS A SINGLE

UNIT.

SCALE 1:2

⌖ A�|�B�|�C

2X 1/4-20 ↧ 1.0 ⌖ A�|�B�|�C

SCALE 1:2

AS BUILT

CERTIFIED FOR

CONSTRUCTION

INFORMATION

ONLY

MATERIAL PLASMA EXPOSURE EXPERIMENT

5 4

DEFAULT TOLERANCES

LINEAR ANGULAR

X.X ±.1 ±.5°

X.XX ±.01

X.XXX ±.005

REMOVE ALL BURRS AND

DO NOT SCALE DRAWING

DEPARTMENT OF ENERGY UNDER U.S. GOVE RNMENT CONTRACT DE-AC05-00OR22725

OAK RIDGE NATIONAL LABORATORY

THIS DRAWING IS THE PROPERTY OF

OAK RIDGE, TENNESSEE

AS BUILT

CERTIFIED FOR

CONSTRUCTION

INFORMATION

ONLY

4.563

.250

1.750

.375

2.375

1.375

4X 6.000

12.8

20.38

31.46

33.16

.500

2X .375

32.05

1.375

R.141

R.200

2X .750

2X .375

2X .130

2.75

1.400

2X .075

⌀ THRU ⌴ .400 X ↧ .130.281

.681

1.250

32.800

D W G

N O

M P E X D E S A

S H

NEXT USED ASSEMBLIES

MPEX-02-DES-02-A022

APPROVALS

DESIGNER DATE

K.LOGAN 09/12/2025

DETAILER DATE

K.LOGAN 09/12/2025

CHECKER DATE

D.OTTINGER 09/12/2025

ENGINEER DATE

MPEX DEVICE

HELICON_MAGNET

D. VANDERGRIFF 09/12/2025

QUALITY ENGINEER DATE

N/A N/A

CONTROL ACCOUNT MANAGER DATE

SUPPORT RAIL RIGHT R.DUCKWORTH 09/12/2025

SIZE DRAWING NUMBER REV

D MPEX-02-DES-02-A025 0

THIRD ANGLE PROJECTION SCALE CAD MODEL SHEET

1:4 MPEX-02-DES-02-A025 1 of 1

MPEX GUIDE

THIS DRAWING PREPARED ON CREOMPEX-00-ENG-005

MODEL REV

PART INFORMATION

WEIGHTMATERIAL / SPECIFICATIONDESCRIPTION

19.37 LBS

SS 304 (S30400) PRODEC OR EQUIVALENT

SUPPORT RAIL RIGHT

REVISIONS

DATECAMQLYENGCKDETDESDESCRIPTION OF CHANGEREV

09/12/2025RDNADVDOKLKLORIGINAL ISSUE0

DRAWING PACKAGE I.D.

MPEX-02-PKG-002

DESCRIPTION SYMBOL

CERTIFIED STAMP:

PLACE TO CERTIFY

INFORMATION ON DRAWING

IS ACCEPTABLE TO BUILD

FROM.

INFORMATION STAMP:

PLACE TO STATE DRAWING

IS FOR INFORMATION

ONLY, AND OTHER

DRAWINGS EXIST TO

MANUFACTURE FROM.

AS BUILT STAMP:

PLACE WHEN AS BUILT IN

THE FIELD APPLIES;

REQUIRES DRAWING

REVISION.

FLAG NOTE SYMBOL:

PLACED IN GENERAL

NOTES, BUT APPLIES TO

SPECIFC FEATURE ON

DRAWING.

INSPECTION SYMBOL:

PLACE NEXT TO A

CRITICAL FEATURE THAT

REQUIRES DOCUMENTATION

OF INSPECTION PRIOR TO

ASSEMBLY.

O N:

-O ct -2

:5 1:

⌖ A�|�B�|�C

3X ⌀.218 ↧.22 ⌵ .400 X 90 °

NOTES:

1.USE ONLY WATER SOLUBLE, NON-SULFUROUS CUTTING FLUID.

2. ALL COMPONENTS SHALL BE CLEAN, FREE OF DIRT,

GREASE, CUTTING FLUIDS.

3. USE LOCTITE LB8013 ANTI-SIEZE OR EQUIVALENT IN

THREADS.

⌖ A�|�B�|�C

SCALE 1:2

SEE DETAIL A

2X 3/8-16 THRU

10X 10-32 TAP THRU

2X 3/8-16 ↧ 1.0 BOTH ENDS

⌖ A�|�B�|�C

SECTION A-A

⫽ B

DETAIL A

SCALE 1:1

AS BUILT

CERTIFIED FOR

CONSTRUCTION

INFORMATION

ONLY

MATERIAL PLASMA EXPOSURE EXPERIMENT

5 4

DEFAULT TOLERANCES

LINEAR ANGULAR

X.X ±.1 ±.5°

X.XX ±.01

X.XXX ±.005

REMOVE ALL BURRS AND

DO NOT SCALE DRAWING

DEPARTMENT OF ENERGY UNDER U.S. GOVE RNMENT CONTRACT DE-AC05-00OR22725

OAK RIDGE NATIONAL LABORATORY

THIS DRAWING IS THE PROPERTY OF

OAK RIDGE, TENNESSEE

AS BUILT

CERTIFIED FOR

CONSTRUCTION

INFORMATION

ONLY

.250

1.375

1.75

4.563 4X 6.000

.681

1.250

.375

2.375

⌀ THRU ⌴ .400 X ↧ .130.281

31.5

12.75

20.38

2X .375 33.16

.500 32.05

R.200

R.141

1.375

.130

2X .750

2X .375

1.400

2.75

2X .075

32.800

D W G

N O

M P E X D E S A

S H

NEXT USED ASSEMBLIES

MPEX-02-DES-02-A022

APPROVALS

DESIGNER DATE

K.LOGAN 09/12/2025

DETAILER DATE

K.LOGAN 09/12/2025

CHECKER DATE

D.OTTINGER 09/12/2025

ENGINEER DATE

MPEX DEVICE

HELICON MAGNET

D.VANDERGRIFF 09/12/2025

QUALITY ENGINEER DATE

N/A N/A

CONTROL ACCOUNT MANAGER DATE

SUPPORT RAIL LEFT R. DUCKWORTH 09/12/2025

SIZE DRAWING NUMBER REV

D MPEX-02-DES-02-A026 0

THIRD ANGLE PROJECTION SCALE CAD MODEL SHEET

1:4 MPEX-02-DES-02-A026 1 of 1

MPEX GUIDE

THIS DRAWING PREPARED ON CREOMPEX-00-ENG-005

MODEL REV

PART INFORMATION

WEIGHTMATERIAL / SPECIFICATIONDESCRIPTION

19.37 LBS

SS 304 (S30400) PRODEC OR EQUIVALENT

SUPPORT RAIL LEFT

REVISIONS

DATECAMQLYENGCKDETDESDESCRIPTION OF CHANGEREV

09/12/2025RDNADVDOKLKLORIGINAL ISSUE0

DRAWING PACKAGE I.D.

MPEX-00-PKG-002

DESCRIPTION SYMBOL

CERTIFIED STAMP:

PLACE TO CERTIFY

INFORMATION ON DRAWING

IS ACCEPTABLE TO BUILD

FROM.

INFORMATION STAMP:

PLACE TO STATE DRAWING

IS FOR INFORMATION

ONLY, AND OTHER

DRAWINGS EXIST TO

MANUFACTURE FROM.

AS BUILT STAMP:

PLACE WHEN AS BUILT IN

THE FIELD APPLIES;

REQUIRES DRAWING

REVISION.

FLAG NOTE SYMBOL:

PLACED IN GENERAL

NOTES, BUT APPLIES TO

SPECIFC FEATURE ON

DRAWING.

INSPECTION SYMBOL:

PLACE NEXT TO A

CRITICAL FEATURE THAT

REQUIRES DOCUMENTATION

OF INSPECTION PRIOR TO

ASSEMBLY.

O N:

-O ct -2

:5 3:

⌖ A�|�B�|�C

⫽ B

NOTES:

1.USE ONLY WATER SOLUBLE, NON-SULFUROUS CUTTING FLUID.

2. ALL COMPONENTS SHALL BE CLEAN, FREE OF DIRT,

GREASE, CUTTING FLUIDS.

3. USE LOCTITE LB8013 ANTI-SIEZE OR EQUIVALENT IN

THREADS.

10X 10-32 TAP THRU

3X ⌀.218 ↧.22 ⌵ .400 X 90 °

SCALE 1:2

⌖ A�|�B�|�C

2X 3/8-16 THRU

SEE DETAIL A

2X 3/8-16 ↧ 1.0 BOTH ENDS

⌖ A�|�B�|�C

SECTION A-A

⫽ B

DETAIL A

SCALE 3:2

AS BUILT

CERTIFIED FOR

CONSTRUCTION

INFORMATION

ONLY

MATERIAL PLASMA EXPOSURE EXPERIMENT

5 4

DEFAULT TOLERANCES

LINEAR ANGULAR

X.X ±.1 ±.5°

X.XX ±.01

X.XXX ±.005

REMOVE ALL BURRS AND

DO NOT SCALE DRAWING

DEPARTMENT OF ENERGY UNDER U.S. GOVE RNMENT CONTRACT DE-AC05-00OR22725

OAK RIDGE NATIONAL LABORATORY

THIS DRAWING IS THE PROPERTY OF

OAK RIDGE, TENNESSEE

AS BUILT

CERTIFIED FOR

CONSTRUCTION

INFORMATION

ONLY

2X X 45°.014

.250

1.25

.406

D W G

N O

M P E X D E S A

S H

NEXT USED ASSEMBLIES

MPEX-02-DES-02-A022

APPROVALS

DESIGNER DATE

K.LOGAN 09/12/2025

DETAILER DATE

K.LOGAN 09/12/2025

CHECKER DATE

D.OTTINGER 09/12/2025

ENGINEER DATE

MPEX DEVICE

HELICON MAGNET

D.VANDERGRIFF 09/12/2025

QUALITY ENGINEER DATE

N/A N/A

CONTROL ACCOUNT MANAGER DATE

LARGE WASHER R.DUCKWORTH 09/12/2025

SIZE DRAWING NUMBER REV

D MPEX-02-DES-02-A027 0

THIRD ANGLE PROJECTION SCALE CAD MODEL SHEET

4:1 MPEX-02-DES-02-A027 1 of 1

MPEX GUIDE

THIS DRAWING PREPARED ON CREOMPEX-00-ENG-005

MODEL REV

PART INFORMATION

WEIGHTMATERIAL / SPECIFICATIONDESCRIPTION

0.08 LBS

SS 304 (S30400)

LARGE WASHER

REVISIONS

DATECAMQLYENGCKDETDESDESCRIPTION OF CHANGEREV

09/12/2025RDNARDDOKLKLORIGINAL ISSUE0

DRAWING PACKAGE I.D.

MPEX-02-PKG-002

DESCRIPTION SYMBOL

CERTIFIED STAMP:

PLACE TO CERTIFY

INFORMATION ON DRAWING

IS ACCEPTABLE TO BUILD

FROM.

INFORMATION STAMP:

PLACE TO STATE DRAWING

IS FOR INFORMATION

ONLY, AND OTHER

DRAWINGS EXIST TO

MANUFACTURE FROM.

AS BUILT STAMP:

PLACE WHEN AS BUILT IN

THE FIELD APPLIES;

REQUIRES DRAWING

REVISION.

FLAG NOTE SYMBOL:

PLACED IN GENERAL

NOTES, BUT APPLIES TO

SPECIFC FEATURE ON

DRAWING.

INSPECTION SYMBOL:

PLACE NEXT TO A

CRITICAL FEATURE THAT

REQUIRES DOCUMENTATION

OF INSPECTION PRIOR TO

ASSEMBLY.

O N:

-O ct -2

:0 7:

NOTES:

1.USE ONLY WATER SOLUBLE, NON-SULFUROUS CUTTING FLUID.

2. ALL COMPONENTS SHALL BE CLEAN, FREE OF DIRT,

GREASE, CUTTING FLUIDS.

3. USE LOCTITE LB8013 ANTI-SIEZE OR EQUIVALENT IN

THREADS.

SECTION A-A

AS BUILT

CERTIFIED FOR

CONSTRUCTION

INFORMATION

ONLY

MATERIAL PLASMA EXPOSURE EXPERIMENT

5 4

DEFAULT TOLERANCES

LINEAR ANGULAR

X.X ±.1 ±.5°

X.XX ±.01

X.XXX ±.005

REMOVE ALL BURRS AND

DO NOT SCALE DRAWING

DEPARTMENT OF ENERGY UNDER U.S. GOVE RNMENT CONTRACT DE-AC05-00OR22725

OAK RIDGE NATIONAL LABORATORY

THIS DRAWING IS THE PROPERTY OF

OAK RIDGE, TENNESSEE

AS BUILT

CERTIFIED FOR

CONSTRUCTION

INFORMATION

ONLY

.250

2X X 45°.014

1.25

.343

D W G

N O

M P E X D E S A

S H

NEXT USED ASSEMBLIES

MPEX-02-DES-02-A022

APPROVALS

DESIGNER DATE

K.LOGAN 09/12/2025

DETAILER DATE

K.LOGAN 09/12/2025

CHECKER DATE

D.OTTINGER 09/12/2025

ENGINEER DATE

MPEX DEVICE

HEICON MAGNETS

D.VANDERGRIFF 09/12/2025

QUALITY ENGINEER DATE

N/A N/A

CONTROL ACCOUNT MANAGER DATE

SMALL HOLE WASHER R.DUCKWORTH 09/12/2025

SIZE DRAWING NUMBER REV

D MPEX-02-DES-02-A028 0

THIRD ANGLE PROJECTION SCALE CAD MODEL SHEET

4:1 MPEX-02-DES-02-A028 1 of 1

MPEX GUIDE

THIS DRAWING PREPARED ON CREOMPEX-00-ENG-005

MODEL REV

PART INFORMATION

WEIGHTMATERIAL / SPECIFICATIONDESCRIPTION

0.08 LBS

SS 304 (S30400)

SMALL HOLE WASHER

REVISIONS

DATECAMQLYENGCKDETDESDESCRIPTION OF CHANGEREV

09/12/2025RDNADVDOKLKLORIGINAL ISSUE0

DRAWING PACKAGE I.D.

MPEX-02-PKG-002

DESCRIPTION SYMBOL

CERTIFIED STAMP:

PLACE TO CERTIFY

INFORMATION ON DRAWING

IS ACCEPTABLE TO BUILD

FROM.

INFORMATION STAMP:

PLACE TO STATE DRAWING

IS FOR INFORMATION

ONLY, AND OTHER

DRAWINGS EXIST TO

MANUFACTURE FROM.

AS BUILT STAMP:

PLACE WHEN AS BUILT IN

THE FIELD APPLIES;

REQUIRES DRAWING

REVISION.

FLAG NOTE SYMBOL:

PLACED IN GENERAL

NOTES, BUT APPLIES TO

SPECIFC FEATURE ON

DRAWING.

INSPECTION SYMBOL:

PLACE NEXT TO A

CRITICAL FEATURE THAT

REQUIRES DOCUMENTATION

OF INSPECTION PRIOR TO

ASSEMBLY.

O N:

-S ep -2

:3 3:

NOTES:

1.USE ONLY WATER SOLUBLE, NON-SULFUROUS CUTTING FLUID.

2. ALL COMPONENTS SHALL BE CLEAN, FREE OF DIRT,

GREASE, CUTTING FLUIDS.

3. USE LOCTITE LB8013 ANTI-SIEZE OR EQUIVALENT IN

THREADS.

SECTION A-A

AS BUILT

CERTIFIED FOR

CONSTRUCTION

INFORMATION

ONLY

MATERIAL PLASMA EXPOSURE EXPERIMENT

5 4

DEFAULT TOLERANCES

LINEAR ANGULAR

X.X ±.1 ±.5°

X.XX ±.01

X.XXX ±.005

REMOVE ALL BURRS AND

DO NOT SCALE DRAWING

DEPARTMENT OF ENERGY UNDER U.S. GOVE RNMENT CONTRACT DE-AC05-00OR22725

OAK RIDGE NATIONAL LABORATORY

THIS DRAWING IS THE PROPERTY OF

OAK RIDGE, TENNESSEE

AS BUILT

CERTIFIED FOR

CONSTRUCTION

INFORMATION

ONLY

3.1

.420

11.560

2x 1.250

( ).750

5.375

27.00

12X THRU .221

2X 12.000

13.65

2X 3.9

7.5

4X R1.0

6.825

D W G

N O

M P E X D E S A

S H

NEXT USED ASSEMBLIES

MPEX-02-DES-02-A023

APPROVALS

DESIGNER DATE

K.LOGAN 08/17/2025

DETAILER DATE

K.LOGAN 08/17/2025

CHECKER DATE

D.OTTINGER 08/17/2025

ENGINEER DATE

MPEX DEVICE

HELICON MAGNETS

D.VANDERGRIFF 08/17/2025

QUALITY ENGINEER DATE

N/A N/A

CONTROL ACCOUNT MANAGER DATE

ALIGNMENT PLATE R.DUCKWORTH 08/17/2025

SIZE DRAWING NUMBER REV

D MPEX-02-DES-02-A029 0

THIRD ANGLE PROJECTION SCALE CAD MODEL SHEET

1:4 MPEX-02-DES-02-A029 1 of 1

MPEX GUIDE

THIS DRAWING PREPARED ON CREOMPEX-00-ENG-005

MODEL REV

PART INFORMATION

WEIGHTMATERIAL / SPECIFICATIONDESCRIPTION

31.24 LBS

Mic 6 ALUMINUM PLATE

24"X 72" 3/4 THK. MMC-86825K39

ALIGNMENT PLATE

REVISIONS

DATECAMQLYENGCKDETDESDESCRIPTION OF CHANGEREV

08/17/2025RDNADVDOKLKLORIGINAL ISSUE0

DRAWING PACKAGE I.D.

MPEX-02-PKG-002

DESCRIPTION SYMBOL

CERTIFIED STAMP:

PLACE TO CERTIFY

INFORMATION ON DRAWING

IS ACCEPTABLE TO BUILD

FROM.

INFORMATION STAMP:

PLACE TO STATE DRAWING

IS FOR INFORMATION

ONLY, AND OTHER

DRAWINGS EXIST TO

MANUFACTURE FROM.

AS BUILT STAMP:

PLACE WHEN AS BUILT IN

THE FIELD APPLIES;

REQUIRES DRAWING

REVISION.

FLAG NOTE SYMBOL:

PLACED IN GENERAL

NOTES, BUT APPLIES TO

SPECIFC FEATURE ON

DRAWING.

INSPECTION SYMBOL:

PLACE NEXT TO A

CRITICAL FEATURE THAT

REQUIRES DOCUMENTATION

OF INSPECTION PRIOR TO

ASSEMBLY.

O N:

-O ct -2

:2 7:

NOTES:

1.USE ONLY WATER SOLUBLE, NON-SULFUROUS CUTTING FLUID.

2. ALL COMPONENTS SHALL BE CLEAN, FREE OF DIRT,

GREASE, CUTTING FLUIDS.

3. USE LOCTITE LB8013 ANTI-SIEZE OR EQUIVALENT IN

THREADS.

SCALE 3:8

⌖ A�|�B�|�C

TAP 5/16-18 THRU

AS BUILT

CERTIFIED FOR

CONSTRUCTION

INFORMATION

ONLY

MATERIAL PLASMA EXPOSURE EXPERIMENT

5 4

DEFAULT TOLERANCES

LINEAR ANGULAR

X.X ±.1 ±.5°

X.XX ±.01

X.XXX ±.005

REMOVE ALL BURRS AND

DO NOT SCALE DRAWING

DEPARTMENT OF ENERGY UNDER U.S. GOVE RNMENT CONTRACT DE-AC05-00OR22725

OAK RIDGE NATIONAL LABORATORY

THIS DRAWING IS THE PROPERTY OF

OAK RIDGE, TENNESSEE

AS BUILT

CERTIFIED FOR

CONSTRUCTION

INFORMATION

ONLY

.75

.91410.236

.750

2.78

6.03

9.28

3X .375

2X ⌀ THRU.347

12.06

1.50

D W G

N O

M P E X D E S A

S H

NEXT USED ASSEMBLIES

MPEX-02-DES-02-A023

APPROVALS

DESIGNER DATE

K.LOGAN 08/17/2025

DETAILER DATE

K.LOGAN 08/17/2025

CHECKER DATE

D.OTTINGER 08/17/2025

ENGINEER DATE

MPEX DEVICE

HELICON MAGNETS

D.VANDERGRIFF 08/17/2025

QUALITY ENGINEER DATE

N/A N/A

CONTROL ACCOUNT MANAGER DATE

ALIGNMENT PLATE R.DUCKWORTH 08/17/2025

SIZE DRAWING NUMBER REV

D MPEX-02-DES-02-A030 0

THIRD ANGLE PROJECTION SCALE CAD MODEL SHEET

1:4 MPEX-02-DES-02-A030 1 of 1

MPEX GUIDE

THIS DRAWING PREPARED ON CREOMPEX-00-ENG-005

MODEL REV

PART INFORMATION

WEIGHTMATERIAL / SPECIFICATIONDESCRIPTION

1.2 LBS LBS

ALU, 6061

ADJUSTMENT BLOCK

REVISIONS

DATECAMQLYENGCKDETDESDESCRIPTION OF CHANGEREV

08/17/2025RDNADVDOKLKLORIGINAL ISSUE0

DRAWING PACKAGE I.D.

MPEX-02-PKG-002

DESCRIPTION SYMBOL

CERTIFIED STAMP:

PLACE TO CERTIFY

INFORMATION ON DRAWING

IS ACCEPTABLE TO BUILD

FROM.

INFORMATION STAMP:

PLACE TO STATE DRAWING

IS FOR INFORMATION

ONLY, AND OTHER

DRAWINGS EXIST TO

MANUFACTURE FROM.

AS BUILT STAMP:

PLACE WHEN AS BUILT IN

THE FIELD APPLIES;

REQUIRES DRAWING

REVISION.

FLAG NOTE SYMBOL:

PLACED IN GENERAL

NOTES, BUT APPLIES TO

SPECIFC FEATURE ON

DRAWING.

INSPECTION SYMBOL:

PLACE NEXT TO A

CRITICAL FEATURE THAT

REQUIRES DOCUMENTATION

OF INSPECTION PRIOR TO

ASSEMBLY.

O N:

-O ct -2

:5 8:

NOTES:

1.USE ONLY WATER SOLUBLE, NON-SULFUROUS CUTTING FLUID.

2. ALL COMPONENTS SHALL BE CLEAN, FREE OF DIRT,

GREASE, CUTTING FLUIDS.

3. USE LOCTITE LB8013 ANTI-SIEZE OR EQUIVALENT IN

THREADS.

SECTION A-A

3X 1/2-13 THRU

AS BUILT

CERTIFIED FOR

CONSTRUCTION

INFORMATION

ONLY

MATERIAL PLASMA EXPOSURE EXPERIMENT

5 4

DEFAULT TOLERANCES

LINEAR ANGULAR

X.X ±.1 ±.5°

X.XX ±.01

X.XXX ±.005

REMOVE ALL BURRS AND

DO NOT SCALE DRAWING

DEPARTMENT OF ENERGY UNDER U.S. GOVE RNMENT CONTRACT DE-AC05-00OR22725

OAK RIDGE NATIONAL LABORATORY

THIS DRAWING IS THE PROPERTY OF

OAK RIDGE, TENNESSEE

AS BUILT

CERTIFIED FOR

CONSTRUCTION

INFORMATION

ONLY

.900

⌀.625

⌀.347

D W G

N O

M P E X D E S A

S H

NEXT USED ASSEMBLIES

MPEX-02-DES-02-A023

APPROVALS

DESIGNER DATE

K.LOGAN 08/17/2025

DETAILER DATE

K.LOGAN 08/17/2025

CHECKER DATE

D.OTTINGER 08/17/2025

ENGINEER DATE

MPEX DEVICE

HELICON MAGNETS

D.VANDERGRIFF 08/17/2025

QUALITY ENGINEER DATE

N/A N/A

CONTROL ACCOUNT MANAGER DATE

ALIGNMENT SPACER R.DUCKWORTH 08/17/2025

SIZE DRAWING NUMBER REV

D MPEX-02-DES-02-A031 0

THIRD ANGLE PROJECTION SCALE CAD MODEL SHEET

1:4 MPEX-02-DES-02-A031 1 of 1

MPEX GUIDE

THIS DRAWING PREPARED ON CREOMPEX-00-ENG-005

MODEL REV

PART INFORMATION

WEIGHTMATERIAL / SPECIFICATIONDESCRIPTION

.3 LBS LBS

ALU, 6061

ADJUSTMENT BLOCK

REVISIONS

DATECAMQLYENGCKDETDESDESCRIPTION OF CHANGEREV

08/17/2025RDNADVDOKLKLORIGINAL ISSUE0

DRAWING PACKAGE I.D.

MPEX-02-PKG-002

DESCRIPTION SYMBOL

CERTIFIED STAMP:

PLACE TO CERTIFY

INFORMATION ON DRAWING

IS ACCEPTABLE TO BUILD

FROM.

INFORMATION STAMP:

PLACE TO STATE DRAWING

IS FOR INFORMATION

ONLY, AND OTHER

DRAWINGS EXIST TO

MANUFACTURE FROM.

AS BUILT STAMP:

PLACE WHEN AS BUILT IN

THE FIELD APPLIES;

REQUIRES DRAWING

REVISION.

FLAG NOTE SYMBOL:

PLACED IN GENERAL

NOTES, BUT APPLIES TO

SPECIFC FEATURE ON

DRAWING.

INSPECTION SYMBOL:

PLACE NEXT TO A

CRITICAL FEATURE THAT

REQUIRES DOCUMENTATION

OF INSPECTION PRIOR TO

ASSEMBLY.

O N:

-O ct -2

:1 6:

NOTES:

1.USE ONLY WATER SOLUBLE, NON-SULFUROUS CUTTING FLUID.

2. ALL COMPONENTS SHALL BE CLEAN, FREE OF DIRT,

GREASE, CUTTING FLUIDS.

3. USE LOCTITE LB8013 ANTI-SIEZE OR EQUIVALENT IN

THREADS.

SECTION A-A

SCALE 5:1

AS BUILT

CERTIFIED FOR

CONSTRUCTION

INFORMATION

ONLY

File details come from the government source that posted it. Updated Nov 10, 2025.