Moses Middle School _ Serving Lines and milk .pdf

Moses Middle School

Paulding County Schools

Delivery/Installation: July 28, 2025

11400 FOOD SERVICE SERVING COUNTERS SPECIFICATIONS

SERVING COUNTER GENERAL SPECIFICATIONS:

The following specification apply to all retail service counters in the cafeteria server.

Counter Specifications Basis of Design and Required Factory-Provided Services.

1. Counter bases to be constructed shape and sizes shown on plans, with all stainless steel componentry, 34” high for ADA compliance. Galvanized or aluminum material are not acceptable.

Frame to consist of 1” x 1” square, 16-gauge stainless steel tubular frames with all TIG welded joints for heavy-duty construction. No pop rivets or mechanical fasteners permitted. Counters to include:

- Additional cross bracing support under counter top sections and framing to support extra heavy loads where required. Review plan for equipment types and locations.

- Stainless steel aprons on operator side for mounting controls

- Open storage on operator side to include removable 18-gauge stainless steel under shelves

(where possible), without the use of tools. Provide 4” space at rear of shelves for utility chases.

- Countertops to be 14 ga s/s with square turndown on all sides and corners fully welded, ground and polished. Top to have #4 satin finish.

2. Tray slide /Counter top types:

a. 14 ga s/s raised V, or flat surface tray slides with fold down brackets.

3. Legs/Casters:

a. 6” high stainless steel fully adjustable bullet feet.

4. All counter fronts and exposed ends shall be finished in plastic laminate as noted on details and elevations with matching edge banding along sides and top edges. Interior backside of panel to be finished in white laminate. Laminate panels shall be 3/4” thick MDO plywood with matching edge banding. Bottom edges of panels to include black T-moldings for added protection of exposed edges. All front panels must be lift off for service access without the use of tools, end panels to slide out.

5. Coordinate all cut out locations for drop in equipment, grommet holes, beverage line penetrations, food guard post locations, etc. Field installation of drop in fixtures of food guards will not be permitted. Items to be factory installed at one location and shipped as one piece for best coordination, fit and finish and single point of accountability.

6. Tight-link interlocking mechanism, where noted, to be tubular stainless steel construction and to lock adjacent counters together by pulling counter body end channels together from top-to-bottom and front-to-back of counters. Construction of Tight-link to allow utilities to run between counters. Tightlink allows for easy disassembly and relocation of counter sections. Bolts, guide pins or tack welding of counter sections not acceptable.

Or Provisions will be made to bolt counter sections together after leveling and setting in place.

7. Kick plate where noted to have brushed stainless steel finish and mounted with “L” brackets to counter framework, removable with tools.

8. FS Convertible style food shields to be 3-position type over drop-ins, operator service to self-service with ease of convertibility by one person, having no thumbscrews or knobs, with LED lighting, 3/8” clear tempered glass shelf, front glass and (2) glass end panels. 1” x 2” supports to be mounted through counter top and tied into counter base framework below. Stainless steel brushed finish on posts, brackets and hardware. Power switch for lighting mounted in counter apron. No field installation of food shields accepted. Countertop mounted food shields not acceptable.

9. Counter manufacturer to ship counters blanket/pad wrapped on air ride truck.

INDIVIDUAL ITEM SPECIFICATIONS.

Item 1 Quantity Two (2)

Multiteria HLS66 – MODIFIED Hot Food Counter (one left hand and one right hand)

Essence series Hot Food Counter, 65” long x 32” wide x 34” high, per general specs, including:

Accessories:

- Counter to be provided with a hot top section – complete with infinite control and on/off switch.

- Provide an 8” wide stainless steel flat surface tray slide mounted to counter front with fold down type brackets.

- Tray slide to be mounted flush with the counter top.

- Furnish counter with stainless steel square tubular framework (unitized body construction is not acceptable).

- Counter body panels shall be ¾” laminate wood panels – lift off type as required.

- Drop-in hot food wells, 2-well size, manifold drains, bottom exit with ball valve, each hot food well to use a 1200-watt heat source with individual controls. UL listed and approved.

Controls mounted in counter apron. Locate in counter as shown on drawing.

- FS style convertible food shield (three position shield) with LED lights. Food shield to span the length of the counter.

- Electrical connection box in counter base with 8’ cord set as shown on drawing.

- Counter shall be provided with 5” diameter swivel casters – all with brakes.

- Provide a black powder coated pergola over structure, powder coat color to be selected by owner. The structure will be shipped loose, size and shape per drawing. The front facia of the pergola will have LED back lit laser cut text for signage … i.e. HOME COOKING or etc.

- Power cords to be extended upward through the pergola or similar manner to act as a utility chase to accommodate ceiling power drops in the field.

- Tight link between counter units.

Item 2

Multiteria HLS60 – MODIFIED Hot Food Counter (one left hand and one right hand)

Essence series Hot Food Counter, 57” long x 32” wide x 34” high, per general specs, including:

Accessories:

- Counter to be provided with a flat top section to act as a tray pass area.

- Provide an 8” wide stainless steel flat surface tray slide mounted to counter front with fold down type brackets.

- Tray slide to be mounted flush with the counter top.

- Furnish counter with stainless steel square tubular framework (unitized body construction is not acceptable).

- Counter body panels shall be ¾” laminate wood panels – lift off type as required.

- Drop-in hot food wells, 2-well size, manifold drains, bottom exit with ball valve, each hot food well to use a 1200-watt heat source with individual controls. UL listed and approved.

Controls mounted in counter apron. Locate in counter as shown on drawing.

- FS style convertible food shield (three position shield) with LED lights. Food shield to span the length of the counter.

- Electrical connection box in counter base with 8’ cord set as shown on drawing.

- Provide a black powder coated pergola over structure, powder coat color to be selected by owner. The structure will be shipped loose, size and shape per drawing. The front facia of the pergola will have LED back lit laser cut text for signage … i.e. HOME COOKING or etc.

- Power cords to be extended upward through the pergola or similar manner to act as a utility chase to accommodate ceiling power drops in the field.

- Counter shall be provided with 5” diameter swivel casters – all with brakes.

Item 3

Multiteria CLS72 - MODIFIED Cold Food Counter (one left hand and one right hand)

Essence series Cold Food Counter, 72” long x 32” wide x 34” high, per general specs, including:

Accessories:

- Provide an 8” wide stainless steel flat surface tray slide mounted to counter front with fold down type brackets.

- Tray slide to be mounted flush with the counter top

- Furnish counter with stainless steel square tubular framework (unitized body construction is not acceptable).

- Counter body panels shall be ¾” laminate wood panels – lift off type as required.

- Drop-in cold pan, (4) pan size, 6” deep pans as supplied by others, condenser unit, insulated with drain. Self-contained refrigeration with compressor in cross ventilated housing. Pan to be fully separated from the countertop by a full perimeter breaker strip.

Locate on counter shown on drawing.

- Furnish cold pan with recessed customization as required.

- Provide louvered access doors at the compressor of the cold pan.

- FS style convertible food shield (three position shield) with LED lights. Food shield to span the length of the counter.

- Electrical connection box in counter base with 8’ cord set as shown on drawing.

- Stainless steel hinged louvered door on operator side at compressor with open storage at remaining length with removable under shelf.

- Counter to be mounted on 5” diameter swivel type casters all with brakes.

- Provide a black powder coated pergola over structure, powder coat color to be selected by owner. The structure will be shipped loose, size and shape per drawing. The front facia of the pergola will have LED back lit laser cut text for signage … i.e. HOME COOKING or etc.

- Power cords to be extended upward through the pergola or similar manner to act as a utility chase to accommodate ceiling power drops in the field.

Item 4

Multiteria CSE30 Cashier Counter (one left hand and one right hand)

Essence series Cashier Counter, 30” long x 28” wide x 34” high, per general specs, including:

Accessories:

- Provide a 8” wide stainless steel flat surface tray slide mounted to counter front with fold down type brackets.

- Tray slide to be mounted flush with the counter top.

- Furnish counter with stainless steel square tubular framework (unitized body construction is not acceptable).

- Counter body panels shall be ¾” laminate wood panels – lift off type as required.

- Counter shall be provide with 5” diameter swivel casters – all with brakes.

- Grommet hole in counter top, locate as shown on drawing.

- Includes locking cash drawer with insert.

- Open storage on operator side with under shelf.

- Includes NEMA 15-15R receptacle and 8’ cord and plug.

- Also provide an empty date box.

Item 5 Quantity Required – One (1) 49” long x 35-7/8” wide x 47-5/8” high

Double Access Forced Air Milk Cooler (12 Crate) Victory model VMCFD49-1-S-HC

VMCFD Series – double access, forced-air twin top, forced-air milk coolers are designed to hold milk between 36 to 38 degrees until ready to serve. Produced in two sizes to hold 12 milk cases (13” x 13” x 11”) per unit. Units will also accommodate eight 19” x 13” x 11” milk cases.

CABINET CONSTRUCTION

Standard construction includes the lid, door, adjustable hinges, and door latches made from stainless steel. Balance of exterior is stainless steel. One-piece, reinforced stainless steel floor for maximum milk crate support. Balance of interior is stainless steel. Heavy-duty, epoxy coated steel wire floor racks are provided for added protection. Floor drain is centrally located for easy cleaning, connecting to drain hose with hose adapter.

Doors are fitted with flexible compression gaskets to ensure tight seal. All steel construction with 3-screw hinges add to model durability. Self-latching doors provide added convenience with safety bumpers standard.

Digital exterior thermometer, cylinder lock, bottom drain, latch safety bumpers and swivel casters (2 with locks) are provided as standard.

Foamed-in-place CFC and HCFC free polyurethane insulation enhances the structural strength of the cabinet and helps increase energy efficiency. This insulation helps to prevent liquid penetration that results in foul odors.

REFRIGERATION

Refrigeration system uses R290 refrigerant, to comply with all environmental safety concerns.

Dual evaporator evens airflow throughout coolers, completely enveloping contents in a blanket of cold air.

ELECTRICAL

Units wired at factory and ready for connection to a 115/60/1 phase, 15 amp dedicated outlet. 8’ long cord and plug set included.

Provide this unit with the following options:

(*) Corner bumpers

(*) 7 year parts, labor and compressor warranty

(*) Exclusive 2 year warranty on magnetic door gaskets