Mooring Auger Spec Sheet.pdf
PDF 353 KB Posted
- Attached to
- Mooring Augers
- Solicitation number
- FA487725QA300
About this file
This document is a detailed Mooring Auger Specification Sheet for the Department of the Air Force Air Combat Command. The specification outlines precise technical requirements for mooring augers used in aircraft storage, with comprehensive measurements for each component including overall length (32-35 inches), collar, auger lip, and triangle ring. The augers must be fabricated from steel and hot-dip galvanized to meet A-A-55606 specifications.
The associated pre-solicitation (Solicitation Number: FA487725QA300) seeks qualified vendors to manufacture these mooring augers, anticipated as an Indefinite-Delivery Indefinite-Quantity (IDIQ) contract with a maximum order of 5,000 units over 5 years. Interested vendors must submit a 3-page capabilities narrative to Contracting Officers Patricia Murray and Zachary Goit by 7:00 AM PST on 19 March 2025, with the first delivery required within 90 days of contract award. Vendors must provide an original drawing demonstrating technical understanding and capability to meet military specifications and technical order requirements.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Mooring Auger Photo and Specification Data Sheet
309 AMARG
A. Overall Length: 32 inches to 35 inches, measured from the auger lip to the ring tip.
a. Length: 24 inches, including the collar section.
b. Outside Diameter: 1.320 inches.
c. Inside Diameter: 0.960 inches.
d. Material: Schedule 80 pipe.
B. Collar:
a. Length: 4 inches.
b. Outside Diameter: 1.660 inches.
c. Inside Diameter: 1.380 inches.
d. Material: Schedule 40 pipe.
C. Auger Lip (Screw Portion):
a. Length: 5-1/2 inches to 6 inches.
b. Top Diameter: 4 inches, tapering down to 3/8 inch at the point.
D. Triangle Ring:
a. Material: 1/2-inch 1018 cold roll round bar.
b. Length: 3-3/8 inches to 3-1/2 inches.
c. Bottom Curve Width: 14 inches.
d. Alignment: Designed to align with or pivot from front to back of the collar.
E. Material and Finish: All components shall be fabricated from steel and hot-dip galvanized to meet A-A-55606 specifications.
File details come from the government source that posted it. Updated .