Misc Equipment Salient Characteristics.pdf

Salient Characteristics for Equipment Purchase

For the NASA LAS K-Span project, the 823 RHS needs to purchase the following equipment with the corresponding salient characteristics listed below. NSNs are standardized items with defined specifications. NSNs with an NSL in the NIIN allow for more flexibility in procurement method, in which an any equipment meeting specifications is allowable. Otherwise, the 823 RHS is looking for the specific NSNs listed.

Required delivery date is 30 May 2025.

Line Item Qty Item NSN

1 1 TRANSMITTER, LASER PS930 1265-01-298-9152

2 1 COMPRESSOR, AIR, ROTARY, MC-7 4310-01-592-7565

3 2 WELDER/AIR C/POWER MULTI PAK 3431-00-NSL-0001

4 1 BENDING MACHINE, PIPE 3441-01-016-6623

5 1 SAW, ABRASIVE DISK, 24 IN, HAND TRUCK, CONC/ASP 3895-00-678-3632

6 1 COMPACTOR, IMPACT, PORT, HAND 3895-01-012-3450

7 2 SCREED, VIBRATING 3895-01-461-7069

8 1 UNIT, PUMP AND TANK, FUEL DISPENSING 4930-01-274-0021

9 1 PRESSURE WASHER, DIESEL 4940-01-NSL-0006

10 1 CABLE PULLER SET 4930-01-NSL-0003

11 1 CRIMPING TOOL, HYDRAULIC, DIELESS 5120-01-NSL-1202

12 1 DRILL, HAMMER, ROTARY PORTABLE C2 5130-00-NSL-0007

13 1 CABLE PULLER 6000LB PULLING FORCE 5180-01-NSL-0065

14 1 OHMMETER, VIBRA-GROUND 6225-01-508-9529

15 1 METER, PHASE, UP TO 75K V 6625-01-NSL-0003

16 1 TESTER, GROUND ROD 6625-01-NSL-0006

17 2 ECU 5 TON ALASKAN (RH) 4120-01-541-0618

18 2 HEATER, DUCT TYPE, PORTABLE 130K, MULTI FUELED 4520-01-521-2076

19 3 PANEL, POWER, DISTRIBUTION (B) PANEL, 15 KW 6110-01-236-3829

20 1 PANEL, POWER, DISTRIBUTION (A) PANEL, 60 KW 6110-01-237-4637

21 1 AMMPS 30K MEP-1060A GEN SET 6115-01-679-5442

22 1 GENERATOR, DIESEL 5500 WATT 6115-01-NSL-0013

1. TRANSMITTER, LASER PS930 (NSN 1265-01-298-9152) MINIMUM

SPECIFICATIONS:

1.1. SPECIAL FEATURES SURVEYING LEVEL, SELF LEVELING;

ILLUMINATED FEATURE INCLUDED; HORZONTAL CIRCLE INCLUDED;

HORIZONTAL VERNIER INCLUDED; 5 TRIPOD HEAD; TRIPOD INCLUDED

2. COMPRESSOR, AIR, ROTARY, MC-7 (NSN 4310-01-592-7565) MINIMUM

SPECIFICATIONS:

2.1. COMPRESSOR QUANTITY 1

2.2. GAS FOR WHICH DESIGNED AIR

2.3. DISCHARGE FLOW RATE 125.0 CUBIC FEET PER MINUTE

2.4. DISCHARGE PRESSURE 100.0 POUNDS PER SQUARE INCH GAGE

2.5. ROTARY COMPRESSOR DESIGN AXIAL SCREW

2.6. STAGE QUANTITY 1

2.7. PRIME MOVER TYPE DIESEL ENGINE

3. WELDER/AIR C/POWER MULTI PAK (NSN 3431-00-NSL-0001) MINIMUM

SPECIFICATIONS:

3.1. Horsepower: 27 hp

3.2. Number of Cylinders: 2 Cylinder

3.3. Peak Auxiliary Power: 12,000 W

3.4. Continuous Auxiliary Power: 10,500 W

3.5. Cooling Method: Air Cooled

3.6. Process:

3.6.1. Stick (SMAW)

3.6.2. MIG (GMAW)

3.6.3. Flux Cored (FCAW)

3.6.4. TIG (GTAW)

3.6.5. Air Carbon Arc (CAC-A) Cutting & Gouging

3.7. Output DC Amps Max: 330

4. BENDING MACHINE, PIPE (NSN 3441-01-016-6623) MINIMUM SPECIFICATIONS:

4.1. MOUNTING TYPE PORTABLE

4.2. BEND ANGLE IN DEG 90.0

4.3. DESIGN TYPE MECHANICAL

4.4. OPERATION METHOD HAND

4.5. MAXIMUM MATERIAL DIAMETER ACCOMMODATED 2.000 INCHES

4.6. MOUNTING INCLUDED

4.7. PIPE DIE QUANTITY AND SIZE 1/2,1-1/2,2 IN.

4.8. SPECIAL FEATURES BENDING CAP. 0.5 TO 2 IN. ELECTRICAL METAL

TUBING CONDUIT; 2 IN. ALUMINUM RIGID; 0.5 TO 1.5 INTERMEDIATE RIGID

STEEL; 0.5 TO 1.5 IN. POLYVINYL CHLORIDE CONDUIT

5. SAW, ABRASIVE DISK, 24 IN, HAND TRUCK, CONC/ASP (NSN 3895-00-678-3632)

MINIMUM SPECIFICATIONS:

5.1. HORSEPOWER RATING 30.000

5.2. DRIVE METHOD GASOLINE ENGINE

5.3. CUT TYPE FOR WHICH DESIGNED DRY OR WET

5.4. BLADE CUTTING DEPTH 6.500 INCHES

6. COMPACTOR, IMPACT, PORT, HAND (NSN 3895-01-012-3450) MINIMUM

SPECIFICATIONS:

6.1. Compaction force of 3000 lbs/ft² at 6400 blows per minute

6.2. Power: 6HP

6.3. Centrifugal Force: 13 Kn

6.4. Vibration Frequency: 100 hz

6.5. Travel Speed: 79 ft/min

7. SCREED, VIBRATING (NSN 3895-01-461-7069) MINIMUM SPECIFICATIONS:

7.1. MOUNTING TYPE INTEGRAL HANDLE

7.2. DRIVE TYPE FLEXIBLE SHAFT

7.3. POWER SOURCE GASOLINE ENGINE

7.4. SPECIAL FEATURES CONCRETE VIBRATOR SCREED; SCREED,

VIBRATING COGED CONCRETE VIBRATOR; ENGINE DRIVEN, 4-STROKE, AIR

COOLED, GAS ENG., 5 HP MIN., UNLEADED FUEL; ENG. DRIVEN VIBR.

MECH; NOT LESS THAN 4000 VIBR PER MIN.; REPLACEABLE GREASE TYPE

BEARINGS; 30FT SCREED; 2 MAN WINCH ASSY; FREE SPOOLING HEAVY

DUTY 2500LBS W/100 1/8 IN. AIRCRAFT TYPE CABLE; ECCENTRIC

VIBRATORS.

7.5. SPECIFICATION/STANDARD DATA 98752-A-A-58040 GOVERNMENT

STANDARD

7.6. NONDEFINITIVE SPEC/STD DATA 1 TYPE

8. UNIT, PUMP AND TANK, FUEL DISPENSING (NSN 4930-01-274-0021) MINIMUM

SPECIFICATIONS:

8.1. END ITEM IDENTIFICATION TACTICAL POL DISTRIBUTION EQUIPMENT

8.2. UNIT PACKAGE QUANTITY 1

8.3. COMPONENT DOCUMENT ORIGIN GOVERNMENT

8.4. DOCUMENT SOURCE 51744

8.5. DOCUMENT TYPE MILITARY SPECIFICATION

8.6. COMPONENT DOCUMENT PAGE NUMBER 5.0

8.7. END ITEM SOURCE 51744

8.8. DOCUMENT IDENTIFICATION MIL-T-40136H(ME)

8.9. END ITEM NAME PUMP AND TANK

8.10. CAPACITY RATING 525.0 BED NOMINAL

9. PRESSURE WASHER, DIESEL (NSN 4940-01-NSL-0006) MINIMUM SPECIFICATION:

9.1. 7 GPM

9.2. 4000 PSI

9.3. Diesel fueled

9.4. 23.5 HP engine

9.5. Hoses and attachments included

10. CABLE PULLER SET (NSN 4930-01-NSL-0003) MINIMUM SPECIFICATION:

10.1. Includes: 2 1/2 in, 3 in, 3 1/2 in, 4 in Slip-In and Screw-On Couplings, 3 ft Boom

Tube, 4 ft Boom Tube, 6001 Super Tugger, Boom Mount, Elbow Unit, Floor Mount, Force Gauge and Vise Chains, Mobile Carriage, Nose Unit, Storage Trays

10.2. 1.5 HP

10.3. 7.5 ft/min

10.4. 17.8kN @ 4,000lbs

11. CRIMPING TOOL, HYDRAULIC, DIELESS (NSN 5120-01-NSL-1202) MINIMUM

SPECIFICATION:

11.1. Minimum Pipe diameter: 1/16 in

11.2. Max pipe diameter: 1/5 in

11.3. 12T Crimper

12. DRILL, HAMMER, ROTARY PORTABLE C2 (NSN 5130-00-NSL-0007) MINIMUM

SPECIFICATION:

12.1. Capable of 1 inch bit size

12.2. Rotary Hammer operation

12.3. Battery powered

12.4. 2 foot pounds of impact energy

12.5. 1330 RPM

12.6. 4800 BPM

12.7. Autostop kickback control

13. CABLE PULLER 6000LB PULLING FORCE (NSN 5180-01-NSL-0065) MINIMUM

SPECIFICATIONS:

13.1. Cable Capacity: 1200 ft with (2) 90° Bends; 3 x 1000 MCM Copper Cables; 4 x

500 MCM Copper Cables; 4 x 750 MCM Copper Cables; 750 ft with (4) 90° Bends; 800 ft with (3) 90° Bends

13.2. Pulling Speed at Max. Continuous Pulling Force: 7 fpm

13.3. Frequency:1 Hz

13.4. Horsepower: 1-1/2 hp

13.5. Minimum continuous pulling force 6,000 lbf

14. OHMMETER, VIBRA-GROUND (NSN 6225-01-508-9529) MINIMUM

SPECIFICATIONS:

14.1. Circuit Current For Which Designed: Dc

14.2. Dielectric Withstanding Voltage In Volts: 1500.0

14.3. Environmental Protection: Dripproof and splash proof

14.4. Furnished Items And Quantity: Kit shall include all the equipmeneccessary to calculate the resistivity of the soil by the wenner four-pin and soil method outlined by the astm g 57-78 standard. Kit shall include four-pin resistivity test reel w/leads, four stainless steel t-handle pins 3/8" x 18", soil box w/ four soil pins, operator, maint, and ipb manuals, case

14.5. Accuracy In Percent: -1.0/+1.0 at full scale single indicator single range

14.6. Power Source: Internal

14.7. Part Name Assigned By Controlling Agency: Soil resistance meter aka soil resistivity test kit

14.8. Special Features: Johmmeter/test kit shall be capable of resultant resitivity measurement depth of 20 ft by use of four electrode method; shall be capable of two, three, or four terminal method; calibration interval of 12 months

15. METER, PHASE, UP TO 75K V (NSN 6625-01-NSL-0003) MINIMUM

SPECIFICATIONS:

15.1. Indicator Type: Dial w/pointer

15.2. Accuracy In Percent: -2.000 to 2.000 at full scale single indicator single range

15.3. Measurement Range: +0.0 to 133.0 ohms single indicator single range

16. TESTER, GROUND ROD (NSN 6625-01-NSL-0006) MINIMUM SPECIFICATIONS:

16.1. CAT Safety Rating: CAT IV 600V

16.2. Leakage Current Range: 0.2 mA to 40 A

16.3. Maximum Ground Resistance Measurement: 1,500 ohm

16.4. Minimum Ground Resistance Measurement: 0.03 ohm

16.5. Resistance Accuracy: Low Range ±1.5%; High Range ±25%

16.6. IP Rating: IP40

16.7. Jaw Capacity: 1.3 in

16.8. Operating Frequency: 128 Hz; 2,083 Hz; 50 Hz; 60 Hz

17. ECU 5 TON ALASKAN (RH) (NSN 4120-01-541-0618) MINIMUM SPECIFICATIONS:

17.1. Manufacturer Information:

17.2. AK-ECU-5T-1 0GC93 AKS INDUSTRIES INC

17.3. Technical Specification:

17.4. CAPACITY RATING 5.0 TONS NOMINAL

17.5. FREQUENCY RATING 50.0 HERTZ MINIMUM AND 60.0 HERTZ

MAXIMUM

17.6. OVERALL DEPTH 42.000 INCHES NOMINAL

17.7. OVERALL HEIGHT 25.000 INCHES NOMINAL

17.8. OVERALL WIDTH 35.000 INCHES NOMINAL

17.9. PART NAME ASSIGNED BY CONTROLLING AGENCY 5.0 TON

ENVIRONMENTAL CONTROL UNIT

17.10. PHASE THREE

17.11. SPECIAL FEATURES UNIT COMES WITH ONE COMMERCIAL

TECH MANUAL

17.12. VOLTAGE RATING 120.0 VOLTS MINIMUM AND 208.0 VOLTS

MAXIMUM

17.13. WEIGHT 360.000 POUNDS NOMINAL

18. HEATER, DUCT TYPE, PORTABLE 130K, MULTI FUELED (NSN 4520-01-521-2076)

MINIMUM SPECIFICATIONS:

18.1. MOUNTING TYPE FLOOR SURFACE, FREE STANDING, DUCTED

18.2. HEAT MEDIUM TYPE AIR

18.3. OPERATING CONTROL TYPE HAND SWITCH AND THERMOSTATIC

18.4. HEATING ELEMENT TYPE COMBUSTION CHAMBER

18.5. HEAT DELIVERY RATE 130000.0 BRITISH THERMAL UNIT

18.6. FUEL TYPE MULTIFUEL

19. PANEL, POWER, DISTRIBUTION (B) PANEL, 15 KW (NSN 6110-01-236-3829)

MINIMUM SPECIFICATIONS:

19.1. OVERALL LENGTH 32.000 INCHES NOMINAL

19.2. OVERALL HEIGHT 35.000 INCHES NOMINAL

19.3. OVERALL WIDTH 32.000 INCHES NOMINAL

19.4. END ITEM IDENTIFICATION D86MMIK8604 15KW

19.5. CURRENT RATING IN AMPS 60.0

19.6. INPUT PHASE THREE

19.7. OUTPUT FREQUENCY RATING 60 HERTZ

19.8. INPUT VOLTAGE RATING 120.0 AC VOLTS NOMINAL

19.9. OUTPUT VOLTAGE RATING 120.0 AC VOLTS NOMINAL

19.10. INPUT FREQUENCY IN HERTZ 60.0

20. PANEL, POWER, DISTRIBUTION (A) PANEL, 60 KW (NSN 6110-01-237-4637)

MINIMUM SPECIFICATIONS:

20.1. END ITEM IDENTIFICATION PD86MMIK8605 60KW

20.2. CURRENT RATING IN AMPS 200.0

20.3. INPUT PHASE THREE

20.4. OUTPUT FREQUENCY RATING 60 HERTZ

20.5. INPUT VOLTAGE RATING 120.0 AC POUNDS PER HOUR WET

20.6. INPUT NEUTRAL PROVIDED

20.7. ELECTRICAL OUTPUT QUANTITY 4

20.8. OUTPUT VOLTAGE RATING 120.0 AC VOLTS NOMINAL

20.9. OUTPUT NEUTRAL PROVIDED

20.10. INPUT FREQUENCY IN HERTZ 60.0

21. AMMPS 30K MEP-1060A GEN SET (NSN 6115-01-679-5442) MINIMUM

SPECIFICATIONS:

21.1. FREQUENCY RATING 50.0 HERTZ MINIMUM AND 60.0 HERTZ

MAXIMUM

21.2. END ITEM IDENTIFICATION ADVANCED MEDIUM MOBILE POWER

SYSTEM (AMMPS)

21.3. AC WATTAGE RATING 30.0 KILOWATTS

21.4. PART NAME ASSIGNED BY CONTROLLING AGENCY GEN SET,

DIESEL

22. GENERATOR, DIESEL 5500-WATT (NSN 6115-01-NSL-0013) MINIMUM

SPECIFICATIONS:

22.1. Electric start

22.2. 5500 surge watts

22.3. 5000 rated watts

22.4. Diesel fueled

22.5. Hour meter

22.6. Durable welded frame

22.7. Integrated lifting eye

22.8. Voltage 120/240

22.9. Engine displacement 435 cc

22.10. 12 gallon fuel capacity