Misc Equipment Salient Characteristics Revised.pdf
PDF 155 KB Posted
- Attached to
- New Equipment
- Solicitation number
- FA252125QB053
About this file
This document is a Salient Characteristics document for equipment purchase by the NASA LAS K-Span project, specifically for the 823 RHS. The procurement involves 10 line items of specialized equipment with detailed technical specifications, including welders, pressure washers, cable pullers, crimping tools, drills, electrical meters, ground rod testers, environmental control units, and generators. The required delivery date is 30 May 2025, and each item has specific minimum requirements with reference sources and part numbers provided.
The equipment specifications are comprehensive, covering technical details such as horsepower, power output, cooling methods, cable capacities, electrical ratings, and operational frequencies. For instance, the welder/air power multi-pak requires 27 hp with multiple welding process capabilities, while the diesel generator needs 5500 surge watts, electric start, and a 12-gallon fuel capacity. Reference sources like Airgas, Ultimate Washer, NCT, DMC, Grainger, Jlmatthews Hastings, and Native Instinct are cited for each equipment item, with the document noting that items meeting or exceeding the listed standards are acceptable.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Misc Equipment Salient Characteristics.pdf | ||
| 25QB053 SS.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Salient Characteristics for Equipment Purchase
For the NASA LAS K-Span project, the 823 RHS needs to purchase the following equipment with the corresponding salient characteristics listed below. Sources and part numbers are listed as a reference, although items that meet or exceed those standards are acceptable.
Required delivery date is 30 May 2025.
Line Item Qty Item
1 2 WELDER/AIR C/POWER MULTI PAK
2 1 PRESSURE WASHER, DIESEL
3 1 CABLE PULLER SET
4 1 CRIMPING TOOL, HYDRAULIC, DIELESS
5 1 DRILL, HAMMER, ROTARY PORTABLE C2
6 1 CABLE PULLER 6000LB PULLING FORCE
7 1 METER, PHASE, UP TO 75K V
8 1 TESTER, GROUND ROD
9 2 ECU 5 TON ALASKAN (RH)
10 1 GENERATOR, DIESEL 5500 WATT
1. WELDER/AIR C/POWER MULTI PAK (Reference Source and Part Number: Airgas
MIL907549001) MINIMUM SPECIFICATIONS:
1.1. Horsepower: 27 hp
1.2. Number of Cylinders: 2 Cylinder
1.3. Peak Auxiliary Power: 12,000 W
1.4. Continuous Auxiliary Power: 10,500 W
1.5. Cooling Method: Air Cooled
1.6. Process:
1.6.1. Stick (SMAW)
1.6.2. MIG (GMAW)
1.6.3. Flux Cored (FCAW)
1.6.4. TIG (GTAW)
1.6.5. Air Carbon Arc (CAC-A) Cutting & Gouging
1.7. Output DC Amps Max: 330
2. PRESSURE WASHER, DIESEL (Reference Source and Part Number: Ultimate Washer
E4032KLDGE) MINIMUM SPECIFICATION:
2.1. 7 GPM
2.2. 4000 PSI
2.3. Diesel fueled
2.4. 23.5 HP engine
2.5. Hoses and attachments included
3. CABLE PULLER SET (Reference Source and Part Number: NCT 63150 SP) MINIMUM
SPECIFICATION:
3.1. Includes: 2 1/2 in, 3 in, 3 1/2 in, 4 in Slip-In and Screw-On Couplings, 3 ft Boom Tube, 4 ft Boom Tube, 6001 Super Tugger, Boom Mount, Elbow Unit, Floor Mount, Force
Gauge and Vise Chains, Mobile Carriage, Nose Unit, Storage Trays
3.2. 1.5 HP
3.3. 7.5 ft/min
3.4. 17.8kN @ 4,000lbs
4. CRIMPING TOOL, HYDRAULIC, DIELESS (Reference Source and Part Number: DMC tool 5120014116994) MINIMUM SPECIFICATION:
4.1. Minimum Pipe diameter: 1/16 in
4.2. Max pipe diameter: 1/5 in
4.3. 12T Crimper
5. DRILL, HAMMER, ROTARY PORTABLE C2 (Reference Source and Part Number:
Grainger 48UT38 - Mfr. 2717-20) MINIMUM SPECIFICATION:
5.1. Capable of 1 inch bit size
5.2. Rotary Hammer operation
5.3. Battery powered
5.4. 2 foot pounds of impact energy
5.5. 1330 RPM
5.6. 4800 BPM
5.7. Autostop kickback control
6. CABLE PULLER 6000LB PULLING FORCE (Reference Source and Part Number:
Grainger 454N82) MINIMUM SPECIFICATIONS:
6.1. Cable Capacity: 1200 ft with (2) 90° Bends; 3 x 1000 MCM Copper Cables; 4 x 500
MCM Copper Cables; 4 x 750 MCM Copper Cables; 750 ft with (4) 90° Bends; 800 ft with (3) 90° Bends
6.2. Pulling Speed at Max. Continuous Pulling Force: 7 fpm
6.3. Frequency:1 Hz
6.4. Horsepower: 1-1/2 hp
6.5. Minimum continuous pulling force 6,000 lbf
7. METER, PHASE, UP TO 75K V (Reference Source and Part Number: Jlmatthews Hastings
6702) MINIMUM SPECIFICATIONS:
7.1. Indicator Type: Dial w/pointer
7.2. Accuracy In Percent: -2.000 to 2.000 at full scale single indicator single range
7.3. Measurement Range: +0.0 to 133.0 ohms single indicator single range
8. TESTER, GROUND ROD (Reference Source and Part Number: Grainger 463T92)
MINIMUM SPECIFICATIONS:
8.1. CAT Safety Rating: CAT IV 600V
8.2. Leakage Current Range: 0.2 mA to 40 A
8.3. Maximum Ground Resistance Measurement: 1,500 ohm
8.4. Minimum Ground Resistance Measurement: 0.03 ohm
8.5. Resistance Accuracy: Low Range ±1.5%; High Range ±25%
8.6. IP Rating: IP40
8.7. Jaw Capacity: 1.3 in
8.8. Operating Frequency: 128 Hz; 2,083 Hz; 50 Hz; 60 Hz
9. ECU 5 TON ALASKAN (RH) (Reference Source and Part Number: Native Instinct AK-
ECU-5T) MINIMUM SPECIFICATIONS:
9.1. Manufacturer Information:
9.2. AK-ECU-5T-1 0GC93 AKS INDUSTRIES INC
9.3. Technical Specification:
9.4. CAPACITY RATING 5.0 TONS NOMINAL
9.5. FREQUENCY RATING 50.0 HERTZ MINIMUM AND 60.0 HERTZ MAXIMUM
9.6. OVERALL DEPTH 42.000 INCHES NOMINAL
9.7. OVERALL HEIGHT 25.000 INCHES NOMINAL
9.8. OVERALL WIDTH 35.000 INCHES NOMINAL
9.9. PART NAME ASSIGNED BY CONTROLLING AGENCY 5.0 TON
ENVIRONMENTAL CONTROL UNIT
9.10. PHASE THREE
9.11. SPECIAL FEATURES UNIT COMES WITH ONE COMMERCIAL
TECH MANUAL
9.12. VOLTAGE RATING 120.0 VOLTS MINIMUM AND 208.0 VOLTS
MAXIMUM
9.13. WEIGHT 360.000 POUNDS NOMINAL
10. GENERATOR, DIESEL 5500-WATT (Reference Source and Part Number: Grainger 39FY95
- Mfr. 6864) MINIMUM SPECIFICATIONS:
10.1. Electric start
10.2. 5500 surge watts
10.3. 5000 rated watts
10.4. Diesel fueled
10.5. Hour meter
10.6. Durable welded frame
10.7. Integrated lifting eye
10.8. Voltage 120/240
10.9. Engine displacement 435 cc
10.10. 12 gallon fuel capacity
File details come from the government source that posted it. Updated .