Midway_Park_Playground_Perimeter_Fence_Scope.docx
DOCX document 16 KB Posted
- Attached to
- Midway Park Playground Perimeter Fence
- Solicitation number
- BID-604482-22/LAS
- Issued by
- Seminole County, Florida
About this file
This Scope of Services document is issued by the Seminole County Leisure Service Department's Greenways and Natural Lands Division, seeking a vendor to install a perimeter fence at Midway Park Playground in Sanford, Florida. The project requires the installation of approximately 262 linear feet of 48-inch tall black commercial-grade aluminum picket fence with three horizontal lines, featuring one 6-foot wide entrance opening and no gates. The contractor will be responsible for providing all labor, materials, and equipment, with a project completion timeline of 65 days from the Notice to Proceed. The scope includes specific fence design requirements such as terminal and line post specifications, picket dimensions, powder-coat black finish, and precise installation instructions.
The project requires the contractor to provide a one-year workmanship warranty and deliver two additional fence panels for future repairs. The fence specifications are based on Elite Fence Products, Inc. Commercial grade aluminum fence model EFF-20, with approved equals acceptable. The contractor must manage their own staging area, maintain public sidewalk accessibility, ensure daily site cleanup, and provide their own water source. Additional requirements include precise post hole excavation (9-inch diameter, 30-inch minimum depth), concrete mixing, and site restoration to pre-construction conditions. The total project involves careful measurement verification, manufacturer-compliant installation, and meticulous attention to fence alignment, elevation, and anchoring.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Midway_Park_Playground_Perimeter_Fence_(Addendum_#1_Revision).pdf | ||
| Request_&_Drawings.pdf | ||
| FEMA_REQUIREMENTS.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Midway Park Playground Perimeter Fence Scope of Services
The Seminole County Leisure Service Department, Greenways and Natural Lands Division is seeking a vendor to provide equipment, materials and labor to install fencing around the perimeter of the Midway Park playground located at 2045 Hurston Ave., Sanford FL. 32771
General Requirements:
· The Contractor shall provide all supervision, labor, materials and equipment necessary to install the fencing as specified herein. The contractor shall field verify all dimensions prior to fabrication or purchase of equipment, materials and assemblies.
· The Contractor shall have the work completed within 65 days from the issuance of the Notice to Proceed.
· All fence material shall be purchased, delivered, stored and handled properly to prevent marks or surface defects. Some items may be subject to rejection.
· Contractor shall provide a one year warranty for workmanship.
· Contractor’s staging area/ material lay down area is to be designated by a Seminole County Government representative. Public sidewalks shall be kept clear of debris and open for public pedestrian use.
· Contractor is to provide trash receptacle to be emptied frequently.
· At the end of each workday the Contractor shall clean the affected area and must not leave any open holes and/or trenches so as not to pose a safety hazard to the public at large.
· All other areas affected by work performed shall be returned to pre-construction conditions.
· Contractor shall verify all measurements prior to ordering any materials.
· Install approx. 262’ LF x 48” tall black commercial grade Aluminum picket 3-line flat top fence. The fence shall have one entrance openings with no gates. The opening is to be 6’ wide.
· The contractor shall provide the County with 2 additional fence panels for future repairs.
· There is no water on-site, the contractor shall provide their own water source.
Fence Design Intent:
1. Terminal Posts 2”x 2” x .125 Wall
2. Line Posts 2 1/2” x 2 ½” x .075 Wall
3. Horizontal Rails 1 1/8” x 1 ¾”
4. Pickets ¾” x 3/4” x .050
5. Picket Spacing 3 ¾”
6. Height 48”
7. Panel Length 6’ ¾”
8. Powder-Coat finish – Black
9. The Contractor shall install the fencing according to the fencing manufacturer’s installation instructions.
10. Perform cutting, drilling, and fitting required for installing fencing.
11. Set fencing accurately in location, alignment and elevation.
12. Adjust fencing before anchoring.
13. Excavate foundation hole for posts and fill with concrete. Concrete must be mixed prior to setting in post.
14. Footing shall be 9” diameter and 30” minimum depth.
15. The contractor shall clean-up all spoils from post holes and any ground adjustment needed for fence panel installations shall be removed or blended on-site and left in the same condition as the surrounding area.
Specifications have been developed using Elite Fence Products, Inc. Commercial grade aluminum fence model style EFF-20, black. Approved equals will be accepted.
File details come from the government source that posted it. Updated .