mercer AB2026-56 ON-CALL FACILITIES MAINTENANCE.pdf

PDF 1 MB Posted

Attached to
On-call County Facilities Repair And Maintenance Services
Solicitation number
AB2026-56
Issued by
Mercer County, New Jersey

About this file

This is a Request for Bid (RFB) document issued by the County of Mercer, New Jersey, for on-call county facilities repair and maintenance services. The County seeks bids from qualified contractors to provide repair, stabilization, rehabilitation, replacement, and maintenance services for County-owned or County-maintained buildings, structures, and facility systems across multiple trade disciplines. Services may include concrete and masonry work, carpentry, structural repairs, painting, ironwork and welding, electrical and high-voltage electrical work, plumbing and pipe fitting, fencing, glazing, equipment operation, general and heavy labor, cleanup, and repairs following water, smoke, or fire damage. All work must comply with current New Jersey Building Code requirements. Bids must be submitted electronically via BidNet Direct by November 17, 2026, at 11:30 A.M. The contract shall be awarded for a period of one (1) year with the option to extend one (1) year based upon the index rate established by the New Jersey Department of Consumer Affairs, Division of Local Government Services. Trade Discipline A will be awarded to two (2) general contracting businesses based on the lowest unit cost, while Trade Discipline B disciplines will each be awarded to one (1) vendor providing the lowest unit cost. The County makes no guarantee of minimum quantities, work orders, hours, or total expenditure.

Bidders must submit journeyman/applicable craft hourly rates for each trade discipline, with separate foreman and general foreman rates where applicable. Material markup is capped at ten percent (10%) of documented net actual acquisition cost. Bidders must possess or obtain Public Works Contractor Registration Certificates and comply with New Jersey Prevailing Wage Act requirements. All contractors must provide evidence of required licenses, certifications, and references; submit certified payroll records within ten (10) days of wage payment; complete background checks for all personnel; maintain 24-hour emergency contact capability; and provide detailed daily reports and project documentation. The County reserves the right to request two proposals from awarded contractors for projects exceeding $30,000. Payment shall be processed within thirty (30) calendar days of invoice receipt in accordance with the New Jersey Prompt Payment Act. Contractors shall not charge for mobilization, demobilization, travel, administrative fees, or other costs unless expressly authorized and approved in writing. All estimates must be prepared using RSMeans Construction Estimator or equivalent software.

View the file

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

County of Mercer McDade Administration Building, 640 South Broad Street, Trenton, NJ 08650-0068

ON-CALL COUNTY FACILITIES REPAIR AND MAINTENANCE SERVICES

FOR THE COUNTY OF MERCER

To Be Received On

November 17, 2026, at 11:30 A.M.

Prepared By:

Department of Purchasing

AB2026-56

AB2026-56 COUNTY FACILITIES 2

COUNTY OF MERCER

BIDDER’S DOCUMENT CHECKLIST

Please initial on the lines below for each document/section attesting to the fact that you have read and/or included the documents with your bid.

Required

With

Bid

SUBMISSION REQUIREMENT ( IF CHECKED) Read, Signed

& Submitted

Respondent’s

Initial

A. FAILURE TO SUBMIT ANY OF THESE ITEMS IS MANDATORY CAUSE FOR REJECTION OF BID

Statement of Ownership

Acknowledgement of Receipt of Addenda

Bid Guarantee (Bid Bond or Certified/Cashier’s Check) (with POA for full amount of Bid Bond

Consent of Surety (Certificate from Surety company)

A listing of subcontractors as required by N.J.S.A 40A:11-16 (Applicable to: Electrical, Plumbing, HVAC or Structural Steel)

B. SUBMIT DOCUMENTS AT TIME OF BID RESPONSE DUE DATE OR AT TIME INDICATED

Proposal Page

Cost Proposal

Public Works Contractor Registration Certificate(s) for the Bidder and Designated Subcontractors

(Prior to Award, but effective at time of bid)

Required Licenses, References and Certifications as required for trades (due at time of bid response)

Required Evidence EEO/Affirmative Action Regulations Certificate or Questionnaire- Submit Copy of State Certificate of Employee Information Report

Prevailing Wage Certification

Certification of Available Equipment

Safety Certification

New Jersey Business Registration Certificate for Bidder and Subcontractors (Must be Submitted Prior to Contract Award)

Signed Insurance and Indemnification Requirements

C. Signed Continuity of Operation during Emergencies

C. READ ONLY

Americans With Disabilities Act of 1990 Language Sexual Harassment Guidelines

This checklist is provided for the bidder’s use in assuring compliance with required documentation; however, it does not include all specifications requirements and does not relieve the bidder of the need to read and comply with the specifications.

Name of Respondent: Date:

By Authorized Representative:

Signature:

Print Name & Title:

AB2026-56 COUNTY FACILITIES 3

NOTICE TO BIDDERS

Notice is hereby given that on November 17, 2026, at 11:30 A.M. (Prevailing time), electronically sealed bids will be opened and conducted in electronic platform in accord with N.J.A.C. 5:34-1 et. Seq., on

BidNet Direct at https://www.bidnetdirect.com/new-jersey/mercercounty at which time and place the electronical bids will be opened publicly and read via live-stream by the Purchasing Agent in the Mercer

County McDade Administration Building, 640 South Broad Street, Room 321 Third Floor, Trenton, New

Jersey for:

ON-CALL COUNTY FACILITIES REPAIR AND MAINTENANCE SERVICES FOR THE COUNTY OF MERCER

Specifications and instructions to bidders may be obtained online at https://www.bidnetdirect.com/new-jersey/mercercounty .

BID SUBMISSIONS:

Bids shall be electronically uploaded. NO physical bids shall be received, opened or honored. Please contact BidNet for any questions or assistance with electronic bid submission 1800-835-4603 Option 2.

BID OPENING INFORMATION

Webinar link/password will be posted for the Live-Stream prior to the bid opening date on the BidNet Direct

Communication tab. During the bid opening process, the bidders will be announced as well as bid amounts. A bid review providing unit prices will not take place at the openings.

Need assistance registering or obtaining documents on the BidNet platform? Please follow:

http://www.mercercounty.org/home/showdocument?id=19770 or please contact BidNet's Vendor

Support Department at 800-835-4603, Option 2.*Please note registration is free to view, print, download and submit bids electronically for the County of Mercer .

NOTE:

It is the bidder’s responsibility to ensure that the bid package is delivered by the bid opening date and time. Any bid document received after the deadline established by the Department of Purchasing will not be accepted, regardless of the method of delivery. Bid documents may be obtained from the bid platform

BidNet Direct at https://www.bidnetdirect.com/new-jersey/mercercounty .

Any Bid Addenda will be issued on the BidNet website https://www.bidnetdirect.com/new-jersey/mercercounty and processed in accordance with N.J.S.A. 40A:11-23(c)(2). All interested bidders should check the website from now through bid opening. It is the sole responsibility of the respondent to be knowledgeable of all addenda related to this procurement.

Bidders are required to comply with the requirements of N.J.S.A.10:5-31 et seq. and N.J.A.C. 17:27.

COUNTY OF MERCER, NEW JERSEY

Purchasing Department

609 989 6710

AB2026-56 COUNTY FACILITIES 4

ON-CALL COUNTY FACILITIES REPAIR AND MAINTENANCE SERVICES FOR THE COUNTY OF MERCER

1.INTENT

The County of Mercer requests bids from contractors to provide on-call repair, stabilization, rehabilitation, replacement, and maintenance services for County-owned or County-maintained buildings, structures, and facility systems, in the trade disciplines identified in the Proposal Form. Work may be routine, intermittent, urgent, urgent, or emergency in nature. HVAC services are excluded and are procured separately.

Work shall restore facilities to their original design or constructed condition, or reinforce, rehabilitate, upgrade, or replace components when directed in a written scope of work issued by an authorized County representative. The

County makes no guarantee of any minimum quantity, number of work orders, hours, or total expenditure.

The contract shall be awarded for a period of one (1) year with the option to extend one (1) year based upon the index rate established by the New Jersey Department of Consumer Affairs, Division of Local Government Services. All questions may be submitted via Bidnet question portal or via email to ohibbert@mercercounty.org by November 9, 2.SCOPE OF WORK

The work may include, as authorized for a particular work order: concrete and masonry; carpentry; structural repairs;

painting; ironwork and welding; electrical and high-voltage electrical work; plumbing and pipe fitting; fencing;

glazing; equipment operation; general and heavy labor; cleanup; and repairs following water, smoke, or fire damage. All work shall be performed in accordance with the current New Jersey Building Code requirements per

N.J.A.C. 5:23 and all applicable Code requirements. Bidders must be qualified to perform the work and able to provide the required workforce.

VENDORS ARE RESPONSIBLE FOR PAYMENT OF ALL BONDS AND PERMITS AND/OR ANY OTHER FEES.

3.TRADES, EXPERIENCE, AND QUALIFICATIONS

The trade disciplines to be bid and awarded are those specifically listed in the Proposal Form. Bidders shall identify the discipline(s) for which they submit prices. No bidder may perform work outside an awarded discipline unless the

County has expressly authorized it in writing.

The County may issue a detailed scope for each project. The contractor shall not begin work until it receives written work authorization and the required purchase order, except for a documented emergency in which an authorized

County representative provides the emergency approval permitted by County policy and law. Emergency work shall be documented promptly and shall not excuse compliance with procurement, change-order, or funding requirements.

Bidders shall demonstrate at least three years of relevant experience for each trade discipline bid. THE COUNTY WILL

AWARD SEPARATE CONTRACTS FOR EACH TRADE DISCIPLINE. SUBCONTRACTING IS PERMITTED.

• Ironwork

• Painting

• Welding

• Electrical

• High-voltage electrical

• Laborer / general or heavy labor

• Cement mason

• Equipment operator

• Pipe fitter / plumber

• Fencing: digging, wood/PVC fencing, and metal fencing shall be priced under the applicable classifications identified in the Proposal Forms.

• Asbestos abatement and related regulated work

Bidder must provide trade-specific licenses, registrations, permits, certifications, references with bid response for bidder and all subcontractors.

AB2026-56 COUNTY FACILITIES 5

4. WORK HOURS, EMERGENCY RESPONSE, AND MOBILIZATION

Regular work hours are 6:00 a.m. through 5:00 p.m. on weekdays, excluding County-recognized holidays unless otherwise stated in a work order. Overtime, Saturdays and holidays shall be paid 1.5 times the regular hourly rate and double on Sunday and union recognized holidays per the New Jersey Department of Labor and Workforce

Development prevailing wage determination rates.

The contractor shall acknowledge an emergency request within one (1) hour and mobilize qualified personnel and necessary equipment within four (4) hours, unless the County’s written work authorization states otherwise. The contractor shall maintain a 24-hour emergency contact. The contractor shall be capable of beginning work within twenty-four (24) hours of notice when required by the County.

For non-emergency work, the contractor shall schedule and commence work within the timeframe stated in the written work authorization. The contractor shall respond to requests for estimates within forty-eight (48) hours and provide an itemized estimate within five (5) business days after the site visit, unless the County specifies another timeframe in writing. If the contractor cannot perform the work, it shall notify the County within that timeframe.

The Contractor shall designate a qualified Project Manager/Supervisor who shall serve as the primary point of contact for the County throughout the contract term. The designated Project Manager shall have authority to commit

Contractor personnel and resources and shall be available during all periods when Contractor personnel are performing work.

The designated contract manager shall be named in the contract. The County shall be notified in writing of any change in the designated Project Manager.

5.ASBESTOS, LEAD, MOLD REMEDIATION AND ABATEMENT

No regulated abatement or remediation work may be performed unless the work is included in the authorized scope and the contractor and personnel hold all licenses, permits, certifications, and training required by current federal and New Jersey law. Credentials must authorize the specific activity to be performed.

Asbestos

For regulated asbestos work, the contractor shall maintain the applicable New Jersey Department of Labor and

Workforce Development asbestos contractor/employer license and worker/supervisor permits, including requirements under N.J.S.A. 34:5A-32 et seq. and N.J.A.C. 12:120, as applicable. Required air monitoring, clearance, packaging, labeling, transport, disposal, manifests, and records shall comply with applicable law, permits, and project specifications. Copies of required results and waste records shall be provided to the County.

Lead

For lead-related work, the contractor shall maintain all certifications, permits, and qualified personnel required for the specific activity under applicable New Jersey Department of Community Affairs and Department of Health requirements. Required assessments, work-area controls, sampling, laboratory reports, clearance, waste handling, and corrective actions shall be documented and submitted to the County.

Mold

For mold remediation, the contractor shall demonstrate at least three years of comparable experience and provide at least three (3) references. Before work begins, the contractor shall submit a written work plan describing affected areas, containment, engineering controls, personal protective equipment, removal and cleaning methods, waste handling, and verification procedures. Where the County requires independent post-remediation verification, testing shall be conducted by appropriately qualified personnel independent of the remediation contractor.

6. ENVIRONMENTAL COORDINATION AND HAZARDOUS MATERIALS

Where environmental remediation or regulated materials are involved, the contractor shall coordinate with the

County’s designated engineer, environmental consultant, Licensed Site Remediation Professional, or other authorized professional. The contractor shall not disturb, remove, encapsulate, transport, or dispose of regulated materials except under the approved scope and written direction of the authorized County representative and applicable professional.

The contractor shall immediately notify the County of any previously unidentified suspect asbestos, lead, mold, petroleum contamination, regulated waste, or other potentially hazardous material encountered. Work affecting the

AB2026-56 COUNTY FACILITIES 6

material shall stop in the affected area until the County provides direction, except for actions reasonably necessary to protect life, safety, or property.

7.WORK AUTHORIZATIONS, ESTIMATES, AND CHANGE ORDERS

Each project shall be supported by a written scope of work and itemized proposal identifying labor classifications and hours, material quantities and costs, equipment, applicable markup, schedule, assumptions, and total estimated price. Estimates shall be prepared using RSMeans Construction Estimator or equivalent estimating software as stated in the bid documents, and the supporting estimate shall be provided to the County for review.

No work may begin until the contractor has received the required purchase order and written authorization, except for a documented emergency expressly approved by an authorized County representative under applicable law and County procedures. An approval to respond to an emergency does not authorize work beyond the approved emergency scope.

No oral change order is valid. Additional work, labor, materials, equipment, or services outside the authorized scope must be approved in writing by the official with authority to approve the change, and must comply with N.J.A.C.

5:30-11 et seq., N.J.S.A. 40A:11-16.7 et seq. where applicable, and all other governing requirements. The contractor shall notify the County before exceeding the approved proposal. Work performed without required authorization may be rejected and may not be paid.

For projects estimated to exceed $30,000, the County’s stated procedure is to obtain two proposals from awarded contractors.

8. MATERIALS AND MATERIAL MARKUP

The County shall reimburse only materials specifically authorized, actually purchased, used in the work, and supported by supplier invoices, receipts, or other documentation acceptable to the County. The maximum markup is ten percent (10%) of the contractor’s documented net actual acquisition cost, after discounts, credits, rebates, and returns.

No markup may be applied to taxes, freight, delivery, fuel, financing, administrative charges, or other costs unless expressly permitted by the bid documents and approved in writing. For any individual material purchase exceeding

$2,500, the County may require quotations from at least two suppliers or other evidence that the price is commercially reasonable.

9. EQUIPMENT

Rental equipment must be approved in writing before use and supported by a third-party rental invoice. If the bid schedule permits a five percent (5%) markup on approved rental equipment, that markup shall be applied only to the documented, approved rental charge and shall not be combined with another markup on the same cost.

Payment shall be limited to authorized operating time unless the bid documents expressly authorize another billable period.

Contractor-owned equipment shall be identified by equipment type, make, model, and the applicable published

Blue Book rate or other objective rate source identified in the bid documents. If the County elects to pay 55% of an identified Blue Book rental rate for contractor-owned equipment, the Proposal Forms shall state the exact source, edition, calculation method, and conditions of use. No standby, idle, delivery, pickup, fuel, mobilization, demobilization, or other equipment charge is payable unless expressly stated in the bid documents and approved in writing.

10. SUBCONTRACTORS AND PERSONNEL

Bidders shall identify all subcontractors that will be used throughout the contract No subcontractor may perform work unless identified as required, properly licensed and registered, and approved. A substitution or addition requires prior written County approval and must comply with applicable law and the bid documents.

The prime contractor remains responsible for all work, acts, omissions, employees, subcontractors, materials, safety, and compliance. All contractor, subcontractor, temporary, and replacement personnel must complete and pass

County-required background checks before accessing County facilities. The County may require removal of personnel for reasonable security, conduct, qualification, performance, or safety concerns.

AB2026-56 COUNTY FACILITIES 7

11. SAFETY, CODES, PERMITS, AND INSPECTIONS

All work and materials shall comply with the New Jersey Uniform Construction Code, N.J.A.C. 5:23, applicable electrical, plumbing, fire, environmental, occupational-safety, and other codes and standards. Contractors shall obtain and pay for permits, inspections, licenses, bonds, and fees assigned to them by the bid documents and applicable law. Required permits and inspection approvals shall be provided to the County.

Before work begins, the contractor shall submit the anticipated crew, crew size, and equipment for County approval.

The contractor shall comply with OSHA requirements and provide a project-specific safety plan when requested. The contractor is responsible for employee and subcontractor safety and shall provide required barricades, signage, personal protective equipment, fall protection, confined-space protections, and other safeguards.

The County may inspect work and materials. Inspection, payment, or failure to immediately identify a defect does not waive the contractor’s obligation to correct nonconforming or defective work at no additional cost.

12. REPORTS, SITE LOGS, AND DOCUMENTATION

For each day work is performed, the contractor shall submit a daily report to the County representative within one (1) business day. Reports shall include project location, date, personnel names, trade classifications, hours, equipment, materials, work performed and remaining, site conditions, delays, safety incidents, changed conditions, and photographs when requested.

All crew members shall sign in and out at each site using the County’s designated process, including recording meal breaks. Before-and-after photographs shall be submitted with the invoice. Photographs shall identify the project location and date.

Upon completion and before submitting an invoice, the contractor shall provide, as applicable: final inspection documentation; punch-list completion; completion certification; warranty information; manufacturer documentation; as-built drawings; permits and inspection approvals; photographs; final material documentation;

and final invoice reconciliation. The County representative shall complete the project closeout checklist and submit it with the invoice.

13. INVOICING AND PAYMENT

Invoices shall be itemized by project and shall include the purchase order number, bid number, resolution or award reference where applicable, location, dates, employee names, trade classifications, arrival and departure times, actual billable hours, work performed, equipment operating time, materials, supporting purchase documentation, authorized markup, and applicable project records. Blanket or non-itemized estimates and invoices may be rejected as noncompliant.

The contractor may invoice only for authorized work actually performed and accepted. Travel and commuting time, meal periods, unauthorized breaks, idle time, waiting caused by contractor personnel, time spent obtaining materials, estimating time, and administrative time are not billable.

Payment shall be processed in accordance with the New Jersey Prompt Payment Act, N.J.S.A. 2A:30A-1 et seq., as applicable, and other governing law. The County shall review invoices and provide any written notice of disputed or withheld amounts within the time required by law. Nothing in the contract shall shorten statutory payment rights or deem an invoice approved contrary to applicable law.

The contractor shall provide all required certified payrolls and closeout documents within the applicable statutory and contractual timeframes. The County may reconcile invoices against daily reports, sign-in/sign-out records, payroll records, material receipts, and approved work authorizations.

14. WARRANTY

The contractor warrants workmanship for at least twelve (12) months from final acceptance of the applicable work.

Materials and equipment shall be covered for the longer of twelve (12) months from final acceptance or the manufacturer’s applicable warranty period. The contractor shall correct defective workmanship, installation, materials, or repairs discovered during the warranty period at no additional cost, including necessary labor, materials, equipment, removal, disposal, testing, and restoration.

15. SAFETY PLAN

AB2026-56 COUNTY FACILITIES 8

Prior to commencement of work, the Contractor shall comply with all applicable OSHA requirements and shall provide a project-specific safety plan when requested by the County. The Contractor shall be solely responsible for the safety of its employees, subcontractors, equipment, work areas, and operations and shall maintain appropriate barricades, warning signs, personal protective equipment, fall protection, confined-space protections, and other safety measures required by the nature of the work.

16. BID AWARD

Contractor(s) shall submit a Journeyman/Applicable Craft Hourly Rate for each trade discipline and prevailing-wage classification identified on the Proposal Pages. The hourly rate shall include all overhead, profit, labor costs, applicable fringe benefits, and other costs required to perform the work in accordance with the Contract and the applicable

New Jersey Prevailing Wage Rate Determination.

For purposes of evaluating and comparing bids, the County will multiply the estimated hours listed on the Proposal

Pages by the Bidder's submitted Journeyman/Applicable Craft Hourly Rate for each trade discipline. The estimated hours are provided for bid comparison purposes only and do not constitute a guarantee of hours or work.

The Contractor shall be paid for the actual hours worked at the applicable awarded hourly rate, subject to the

Contract, authorized work, and the applicable New Jersey Prevailing Wage Rate Determination.

Contractors shall also submit separate Foreman and General Foreman hourly rates, where applicable, for each trade discipline. These rates are required for prevailing-wage compliance and shall be used when the applicable wage determination requires a Foreman or General Foreman classification based upon the size, composition, or supervision of the Contractor's workforce.

The submission of separate Foreman and General Foreman rates shall not result in duplicate payment or double counting of the estimated hours used for bid comparison. The County will not automatically multiply the estimated hours by both the Journeyman and Foreman rates. The applicable labor classification shall be determined based upon the actual work performed and the requirements of the prevailing-wage determination.

The Contractor shall not charge the County an additional labor classification surcharge, supervisory surcharge, premium, or other additional labor charge solely because an employee performing the work is classified as a Foreman, General Foreman, Supervisor, Mechanic, Helper, or other classification, unless the applicable rate or charge is expressly provided for in the awarded Proposal and is permitted under the Contract and applicable law.

The Contractor shall pay each employee not less than the applicable prevailing-wage rate for the craft or classification actually performing the work, including applicable fringe benefits, regardless of the title or classification used by the

Contractor.

The Contractor shall be responsible for properly classifying its employees in accordance with the applicable New Jersey

Prevailing Wage Rate Determination. The trade descriptions appearing on the Proposal Pages are provided for bidding and identification purposes and shall not authorize the Contractor to use a different prevailing-wage classification than the classification applicable to the actual work being performed.

Where welding is performed, the Contractor shall use the applicable prevailing-wage classification required by the wage determination, including the classification to which the welding is incidental where required by the determination.

For asbestos, lead, mold, hazardous waste, and related remediation or abatement work, the Contractor shall use the applicable prevailing-wage classification identified in the wage determination for the work actually performed. Where the determination places asbestos, lead, mold, chemical, biological, or hazardous-waste remediation/abatement work under the Laborer – Asbestos & Hazardous Waste Removal classification, that classification and its applicable

Foreman rate shall be used.

The County reserves the right to review certified payrolls, employee classifications, time records, wage records, fringe-benefit records, and other supporting documentation to verify compliance with the applicable prevailing-wage requirements.

Award shall be made to the lowest responsive and responsible bidder based upon the Grand Total calculated in accordance with the Proposal Pages and the bid evaluation methodology stated herein.

AB2026-56 COUNTY FACILITIES 9

Trade Discipline (A) will be awarded to (2) General Contracting Businesses based upon the lowest unit cost listed under

Trade Discipline A. Awarded contractor must provide pricing for all trades listed.

Trade Discipline (B) each discipline will be awarded to one (1) vendor who provides the lowest unit cost.

16.PROPOSALS SUBMITTED BY THE AWARDED CONTRACTORS

When the awarded contractors are contacted for proposals, proposals should be broken out by the hourly rates per trade by the Contractors. The awarded contractors shall submit a detailed proposal based upon their RS Means or equivalent Construction Estimating Software.

The County shall require two proposals for each project from the awarded contractors for all projects with an estimated cost exceeding $30,000.00. In a event of any emergency, the County may go with the first contractor that responds.

17. RESPONSE TO REQUESTS FOR ESTIMATES

The Contractor shall respond to all requests for quotations or estimates issued by County agencies within three (3) business days of the request. Following a site visit, the Contractor shall submit a written estimate within five (5) business days of the site visit. If no site visit is required, the Contractor shall submit the estimate within five (5) business days of the

County’s request, unless otherwise directed by the County Representative.

The County will not compensate the Contractor for travel time, site visits, preparation of estimates, or other costs associated with responding to requests for quotations, unless expressly authorized in writing by the County and permitted under the Contract. The Contractor shall provide an estimate when requested by an authorized County

Representative. If the Contractor determines that it lacks the qualifications, licenses, equipment, personnel, or other resources necessary to perform the requested work, the Contractor shall notify the County Representative in writing within the applicable response period and explain the reason it cannot perform the work. Failure to respond to a request, provide a required estimate within the established timeframe, or timely notify the County of an inability to perform the requested work may constitute a breach of contract and may result in contractual remedies, subject to the terms of the Contract and applicable law.

18.PROJECT COMPLETION PROCESS

Upon completion of each project, the Contractor shall compile and submit the applicable closeout documentation to the designated County Representative. All required closeout documents must be submitted and accepted before the Contractor submits its final invoice for that project, unless otherwise authorized in writing by the County.

The required documentation shall include, as applicable:

1. Final inspection documentation.

2. Punch list identifying outstanding deficiencies and confirmation that required corrective work has been completed.

3. Completion certification confirming that the authorized work has been completed in accordance with the

Contract, approved scope, and applicable specifications.

4. Warranty information, including warranty periods, terms, and contact information.

5. Manufacturer documentation, including product data, operation manuals, and maintenance instructions, where applicable.

6. As-built drawings reflecting the completed work, where applicable.

7. Required permits, inspection reports, certificates, and final inspection approvals.

8. Photographs (before & after) documenting the completed work, where required by the County.

9. Final material documentation, including product identification, applicable certifications, and supporting records.

10. Final invoice reconciliation identifying the authorized work performed, approved changes, applicable labor classifications and rates, material costs, and amounts previously billed or paid.

19.CHANGE ORDER APPROVALS

NO ORAL CHANGE ORDERS

No additional work, materials, labor, equipment, or services outside the approved scope shall be performed or billed unless authorized in writing by an authorized County representative, except where immediate action is necessary to protect life, safety, property, or prevent further damage. All change order requests shall be submitted by the contractor to the Owner’s Representative or County Project Manager. Changes must be authorized in accordance with N.J.A.C.

5:30-11 et seq. Situations involving the differing or changed conditions described in P. L. 2017, c. 317, N.J.S.A. 40A: 11

16.7 et seq., shall be reviewed and addressed in accordance with said law.

AB2026-56 COUNTY FACILITIES 10

In an emergency, the Contractor shall notify the County as soon as reasonably practicable and shall document the emergency condition, work performed, labor utilized, materials utilized, and costs incurred.

20.UNAUTHORIZED FEES

Except as expressly authorized by the contract and approved in accordance with the County's procedures, the

Contractor shall not charge the County for mobilization, demobilization, travel, mileage, fuel surcharges, administrative fees, project management fees, estimating fees, minimum service charges, delivery charges, shop supplies, consumables, disposal fees, permit fees or other additional charges.

21. CONSTRUCTION COST ESTIMATING SOFTWARE AND PROPOSAL REQUIREMENTS

A. Software Requirements

All awarded Contractors shall maintain access to the current version of the RSMeans Construction Estimator, including applicable updates, or equivalent construction cost estimating software.

The software must provide access to current construction cost data and the functionality necessary to prepare detailed estimates for construction, repair, remodeling, change orders, facilities maintenance, and other work covered by the Contract.

The software must support, as applicable, unit costs, construction assemblies, labor costs, material costs, equipment costs, and other cost components necessary to prepare estimates for the requested work. The software must also permit the selection of applicable construction trades and labor classifications.

Contractors shall use the awarded labor rates and applicable labor classifications identified in the approved Proposal

Pages when preparing estimates. Estimates shall comply with the Contract, the authorized scope of work, applicable

New Jersey prevailing-wage requirements, and the County’s estimating procedures.

The County reserves the right to request documentation demonstrating that the Contractor’s estimating software provides functionality and cost data equivalent to the RSMeans Construction Estimator.

B. Estimate Preparation and Submission

All estimates and proposals submitted to the County Project Manager shall be prepared using the RSMeans

Construction Estimator or equivalent estimating software approved by the County.

Each estimate shall identify the applicable project scope, labor classifications and rates, estimated labor hours, material costs, equipment costs, and other applicable cost components necessary to substantiate the proposed price.

The estimate shall use the awarded labor rates specified in the Proposal Pages and shall identify any additional costs only where expressly permitted by the Contract.

The Contractor shall submit the completed estimate and supporting documentation to the County Project Manager for review and written approval before commencing work.

The County Project Manager shall review the estimate for consistency with the authorized scope of work, awarded pricing, and Contract requirements. The Contractor shall revise and resubmit the estimate if requested by the County

Project Manager.

Approval of an estimate does not authorize work outside the approved scope or waive any requirement for separate written authorization, a purchase order, or an approved change order.

22.PROMPT PAYMENT

In compliance with N.J.S.A. 2A:30A-1 et seq., the County of Mercer shall impose the following payment process: The

County of Mercer shall pay the submitted bill not more than 30 calendar days after the receipt of the bill by the Owner’s

Representative if the contractor has performed in accordance with the contract and the work has been approved and certified by the Owner’s Representative. The billing shall be deemed “approved” and “certified” 20 calendar days after the owner’s representative receives it, unless the Owner’s Representative provides, before the end of the

20-day period, a written statement of the amount withheld and the reason for withholding payment.

AB2026-56 COUNTY FACILITIES 11

23.NEW JERSEY PREVAILING WAGE ACT AND PUBLIC WORKS CONTRACTOR REGISTRATION ACT

Bidders shall comply with and adhere to all requirements of the New Jersey Prevailing Wage Act and Public Works

Contractor Registration Act. The County of Mercer may terminate work if workers are paid less than prevailing wage.

24.CERTIFIED PAYROLLS

The awarded contractor shall submit certified payroll records to the County designee within ten (10) days of the payment of wages. The awarded contractor is responsible for obtaining and submitting all subcontractors' certified payroll records within the aforementioned time period to the County designee. It is the contractor's responsibility to obtain any additional copies of the certified payroll form to be submitted by contacting the New Jersey Department of Labor and Workforce Development, Division of Workplace Standards.

25.PERMITS

If required, the contractor will be responsible for payment relative to permits and schedule site visits and inspections.

26.SECURITY CLEARANCES

As a condition of performing work at any County facility and for purposes of determining a person's qualifications as contracted personnel, the contractor shall provide a criminal history record background check for all personnel assigned to work at any County facility.

27.STAGING AREA(S)

Staging area(s) for repair operations will be agreed upon at the clarification meeting.

28.CONTRACTOR'S TEMPORARY OFFICE

The Contractor is responsible for providing all required temporary office space to perform the work.

29.WELDING

Welding and steel fabrication shall comply with applicable ANSI, AASHTO, AWS, building-code, and project-specific requirements. The contractor shall provide evidence of welder qualifications or certifications when required by the applicable code, specification, or County’s written scope.

30.DRAWINGS

Shop drawings shall be submitted to County Facilities staff and approved by the County Project Manager before fabrication or installation when required by the scope. The County may direct temporary repairs needed to protect the public or building occupants until permanent repairs can be completed. Temporary work remains subject to applicable safety, code, authorization, and documentation requirements.

31.TEMPORARY CONSTRUCTION

The Contractor may be required to make temporary repairs to ensure the environment is safe for the public until permanent repairs can be made.

32.TEMPORARY TOILETS

The Contractor shall be required to provide proper and adequate portable, temporary toilet accommodations for all persons employed on the project in accordance with authorities having jurisdiction. Toilets are to be maintained in proper, safe, clean and sanitary manner.

33.WATER SUPPLY

The Contractor shall be required to provide, install, and maintain all necessary piping, valves, and connections to provide necessary water for its operation. When temporary water lines are no longer required, they shall be removed by the Contractor and any damaged or disturbed grounds or buildings must be restored to their original condition.

34.TEMPORARY LIGHT AND POWER

The Contractor may be required to provide all the electric current and the necessary facilities for its distribution and use as may be required by the project. If authorized by the County, all temporary electricity may come from inside the existing County facility on which the contractor is working. All temporary electrical facilities shall conform to the requirements of the N.J. Uniform Construction Code, and other authorities having jurisdiction. The Contractor shall operate the temporary electrical system during all working hours and during such overtime as may be scheduled in a safe and appropriate manner.

35.TEMPORARY HEATING

The Contractor shall be required to furnish all necessary temporary heating throughout the project. If so, the Contractor shall be responsible for furnishing and paying for all fuel, labor, materials, etc. required to service the necessary temporary heating. The temporary heating apparatus shall be of a type that will not stain, smudge or deface the

AB2026-56 COUNTY FACILITIES 12

finished surfaces and other surfaces requiring stain or paint finish, nor in any other way deposit foreign matter that will be detrimental to the finished product.

36.OCCUPANCY AND WORK BY OTHERS

The bidder expressly acknowledges the County’s right to use other contracts and to employ other Contractors in connection with these projects. Should the bidder receive a contract, the bidder will afford other Contractors and their workers reasonable opportunity for the introduction and storage of materials and equipment and for the execution of their work and will properly coordinate its work with theirs.

37.FENCING WORK

The County shall request fencing including but not limited to Aluminum coated fencing and vinyl clad chain link fencing, wood stockade fencing; includes material, replacement and installation of fencing; installation, resetting of galvanized and vinyl coated line, corner and gate fence posts; drive anchors; barbed wire removal and installation and Specialty Fencing. Materials for fencing must conform to all current requirements and standards.

38.WINDOWS

Safety and performance ratings for the windows shall meet the National Safety Council standards and the National

Fenestration Ratings Council for the following performance:

a. U-value

b. Air infiltration rate

c. Water resistance rating

d. Structural performance

e. Deglazing

f. Rated operating force to open window

g. Visible light transmittance

39.MANUFACTURER'S DIRECTIONS

The Contractor shall apply, install, connect, erect, use, clean and condition manufactured articles, materials, fixtures, and equipment in accordance with the manufacturer's printed directions.

AB2026-56 COUNTY FACILITIES 13

BIDDERS SHALL PROVIDE THE FOLLOWING INFORMATION

NAME OF BIDDER (PRINTED)

AUTHORIZED SIGNATURE

NUMBER OF EMPLOYEES

NUMBER OF YEARS IN BUSINESS

ELECTRICAL LICENSE NUMBER IF APPLICABLE

PLUMBING LICENSE NUMBER IF APPLICABLE

ESTIMATING SOFTWARE __________________

CONTRACTOR IS WILLING TO EXTEND TO COOP MEMBERS YES ( ) NO ( )

PROJECTS ESTIMATES MUST BE GENERATED WITH RS MEANS CONSTRUCTION COST ESTIMATOR SOFTWARE OR

EQUIVALENT

SAFETY PROGRAM:

Observe all rules and regulations of the Federal, State, and local health officials, including regulations concerning construction safety and health standards. At the preconstruction meeting, submit to the

County for approval a written safety program that meets or exceeds the minimum requirements of the

Contract and applicable State or Federal regulations. Include at a minimum the following:

1. Description. Describe in detail how the safety program is implemented and monitored. Provide guidelines for protecting personnel from hazards associated with Project operations and activities.

Establish the policies and procedures for safety practices that are necessary for the Work to be in compliance with the requirements of OSHA and other State and Federal regulatory agencies with jurisdiction, rules, regulations, standards, or guidelines in effect at the time the Work is in progress.

2. Certification, Responsibility, and Identification of Personnel. Identify the qualified safety professional responsible for developing the safety program and provide that person's qualifications for developing the safety program including, but not be limited to, education, training, certifications, and experience in developing this type of safety program. Provide a certification, executed by the qualified safety professional that developed the safety program, stating that the safety program complies with the rules, regulations, standards, and guidelines in effect at the time the Work is in progress, of OSHA, and other applicable Federal, State, and local regulatory agencies having jurisdiction.

Identify a safety officer and designate the on-site supervisory-level personnel responsible for implementing and monitoring the safety program until Acceptance and having the authority to take prompt corrective measures to eliminate hazards, including the authority to stop work. Include documentation of training provided to the on-site supervisory-level personnel. For work that requires a competent person as defined by OSHA, ensure that the person is capable of identifying existing and predictable hazards and has the authority to take prompt corrective measures to eliminate the hazards, including the authority to stop work. Include documentation of the qualifications of such competent persons identified, including certifications received.

3. Elements of the Program. Include information and procedures for the following elements:

a. Chain of Command. Include the responsibilities of the management, supervisor, safety officer, and employees.

b. Traffic Control Coordinator. Include the name and contact information.

AB2026-56 COUNTY FACILITIES 14

c. Environmental Manager. Include the name and contact information.

d. Local Emergency Telephone Numbers. Include police, fire, medical

e. Procedures for Handling Emergencies. Provide guidelines for handling emergencies, including emergency action plans for accidents involving death or serious injury, property damage, fires, explosions, and severe weather. Include the emergency contact information of the Contractor's personnel responsible for handling emergencies.

f. Training Topics. Include regulatory and jobsite toolbox meetings. Include the documentation from the training and an attendance sheet for each.

g. Contractor's Safety Rules. Include housekeeping procedures and personal protective equipment requirements.

h. Employee Disciplinary Policy. Include the violation forms.

i. Safety Checklists. Include project safety-planning, emergency plans and procedures, documentation, and protective materials and equipment.

j. Forms. Include OSHA 300 Log

k. Security Policy Guidelines. Provide a copy for the County.

l. Hazard Communication Program. Provide the following:

1. The location of and instructions for understanding the MSDS. Ensure that the location and instruction are available to anyone within the Project Limits.

2. The person responsible for the hazard communication program and the method of informing personnel of the hazardous communication program. Include attendance sheets of hazard communication meetings.

3. When performing work that generates airborne crystalline silica, include engineering and work practice controls to limit exposure levels to at or below the permissible exposure limit according to 29 CFR 1910.1000 Table Z-3. Ensure that the program includes employee training and respiratory protection measures according to 29

CFR 1910.134 and control of the area when the permissible exposure limit is exceeded. Provide a trained and competent person, according to 29 CFR 1926.30, within the Project Limits at all times when performing work that produces airborne crystalline silica.

m. Additional Requirements. Provide additional procedures for Project specific topics including:

1. Compressed gas cylinders.

2. Confined spaces.

3. Cranes.

4. Electrical.

5. Equipment operators.

6. Fall protection.

7. Hand and power tools.

8. Hearing conservation.

9. Highway safety.

10. Lead.

11. Lock out/tag out.

12. Materials handling, storage, use, and disposal.

13. Night work.

14. Personal protective equipment.

15. Project entry and exit.

16. Respiratory protection.

17. Sanitation.

18. Signs, signals, and barricades.

19. Subcontractors.

20. Trenching.

The Contractor is responsible for implementing, monitoring, updating, and revising the safety program until

Acceptance. Submit updates and revisions to the safety program to the County for approval when new information, new practices or procedures, or changing site and environmental conditions necessitate modifications to protect site personnel. Maintain a copy of the updated safety program, including the

AB2026-56 COUNTY FACILITIES 15

appropriate documentation associated with each element, within the Project Limits so that it is available to workers and other authorized persons entering the Project Limits. Provide program updates to County.

The Contractor is responsible for safety in all aspects, and as set forth in the Insurance and Indemnification

Agreement, shall defend and indemnify the County for any failure or breach to comply with the rules, regulations, standards, and guidelines in effect at the time the Work is in progress, of OSHA, and other applicable Federal, State, and local regulatory agencies having jurisdiction pertaining to the Contractor's safety program.

CHANGE ORDERS:

All change order requests shall be submitted by the contractor to the Owner’s Representative or County Project

Manager. Changes must be reviewed and authorized in accordance with P. L. 2017, c. 317, N.J.S.A. 40A: 11-16.7 et seq., as applicable, and N.J.A.C. 5:30– 11 et seq. The following rates shall apply in computing indirect costs and profit for adjustments in situations not involving differing or changed conditions covered by P.L. 2017, c. 317, N.J.S.A. 40A: 11-

16.7 et seq. When the contract time is increased as a result of a change, the resulting change in contract amount will include the indirect impact cost of extended performance, computed in accordance with the terms of this article, and no further consideration of such costs arising from the specific modification will be given. The percentages for overhead and profit shall be negotiated and may vary according to the nature, extent and complexity of the work involved. The percentages shall be applicable for deleted work as well as additional work. When a change consists of both added and deleted work, the applicable percentages shall be applied to the net cost or credit. In any event, the percentages shall not exceed the following:

a. Overhead will be the sum of:

(1) 15 percent of direct labor costs. NOTE: For the purpose of this article, the term "direct labor" shall include all foremen, equipment operators and skilled, semi-skilled and common laborers directly assigned to the specified operation. The term "direct labor costs" shall consist of the contract or actual payroll rate of wage per hour and fringe benefits paid for each and every hour that such employees are actually engaged in the performance of the work.

(2) 15 percent of direct material costs. NOTE: For the purpose of this article, the term "direct material costs" shall consist of the actual costs of the materials including applicable tax and transportation charges.

b. For rented equipment, an hourly rental rate will be used which will be determined by using the monthly rental rates taken from the current edition of the Rental Rate Blue Book for Construction Equipment and dividing it by 176. An allowance will be made for operating costs for each and every hour the equipment is actually operating in accordance with the rates listed in the aforesaid Rental Book. The contractor will be allowed only 65 percent of the rental rate on contractor-owned equipment. The County reserves the right to provide equipment to the awarded contractor.

c. Bond premiums, insurance, payroll taxes, and travel subsistence, if applicable, will be allowed at actual cost for the equitable adjustment allowed.

d. The prime contractor's profit on the subcontractor's work will be six percent of the subcontractor's costs.

Subcontractor indirect costs will be computed in the same manner as for the prime contractor. The prime contractor agrees to incorporate this article in each of its subcontracts. NOTE: When more than one tier of subcontractors exists, for the purpose of markups, they shall be treated as one subcontractor.

e. A profit of six percent, where profit is allowable by the terms of the applicable contract provision, shall be added to the contractor's total cost for the equitable adjustment allowed. Indirect costs will not be duplicated in direct costs.

f. The General Contractor shall bill unit costs based upon the unit cost proposal provided with the bid.

N.J.S.A 40A:11-16.7 CHANGED CONDITIONS CLAUSES FOR CERTAIN LOCAL PUBLIC CONTRACTS

1. All construction contracts issued by a contracting unit for bids which were…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .