McBain Offices Addendum #2 (12-11-23) (1).pdf
PDF 3 MB Posted
- Attached to
- McBain School Secure Vestibules/Entrances
- Solicitation number
- RFP - MCBA - 240000000461
- Issued by
- Missaukee County, Michigan
About this file
This document is an addendum to the bidding and construction documents for the proposed office and secured entrances project for the McBain Rural Agricultural School in McBain, Michigan. The addendum makes several changes to the construction documents, including the removal of existing interior vestibule doors, frames, and hardware and the provision of new doors, frames, and hardware. It also specifies the use of security film on various door, transom, and sidelite glazing throughout the elementary, middle, and high school office areas. The addendum was issued on December 11, 2023 prior to the award of the contract.
The project is being bid through Missaukee County, Michigan. The base bid requires that existing flooring, base trim, drop ceilings, lighting, and mechanical diffusers in the middle school and elementary office areas remain and be protected during demolition and new work. Alternate #2 calls for the removal and replacement of these items in the existing vestibule, reception office, hall, storage room, offices, closets, health, and conference areas. Pricing terms, set asides, funding sources, and other salient information are not provided in the addendum.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| McBain Offices Addendum #1 (12-01-23).pdf | ||
| McBain Offices Project Manual 11-20-23 BIDDING AND CONSTRUCTION.PDF | ||
| ShortAD (1).DOC | DOC document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
1104 S. Mitchell St., Cadillac, MI 49601 (231) 779-4002 P (231) 779-4022 F www.dkdesign.cc
ADDENDUM NO. 2
PROJECT: McBain Rural Agricultural School – Proposed Office & Secured Entrances.
ARCHITECTS PROJECT NUMBER: 23125
107 E. Maple Street, McBain, MI 49657
December 11, 2023
This addendum is issued prior to award of contract to amend the Contract Documents identified as above.
This addendum shall apply to all applicable provisions of General and Supplementary Conditions, Instructions to Bidders and other contract documents as though items included were part of said contract documents as originally issued.
Except as otherwise specifically mentioned, the general character of the work required by the addendum shall be the same as originally specified, and all incidentals required in connection with the work hereinafter described shall be included even though not specifically mentioned. Where an item is mentioned with no additional specifications given, reference is to be made to the original specifications.
Construction Document Items:
Item No. 1 – Refer to Sheets D1.1 and A1.1, Re-Issued Remove existing Elementary school interior vestibule doors, frame, and hardware, complete.
Provide new doors, frame, and hardware as scheduled at 120B.
Item No. 2 – Refer to Sheets A1.0, A1.1, Re-Issued, & Specification sheets, Not Re-Issued Where “Safety Film” was indicated on doors and windows, provide “Security Film” per attached specification or equal as approved by architect.
Item No. 3 – Refer to Sheets A1.0 and A1.1, Re-Issued Delete reference to “Safety Film” at new door 100, existing doors 110A & B, and 120A along with associated frame side lites and transoms.
Item No. 4 – Refer to Sheets A1.0 and A1.1, Re-Issued Provide “Security Film” at new door 101A and frame side lite, windows 2840-A and 2840B, new doors 101B, 111A, 121A, & Doors 120B and frame side lites & transoms.
Item No. 5 – Refer to Sheets A1.0 and A1.1, Re-Issued, & photos below Provide “Security Film” at the indicated existing door lites, side lites, transoms, and window. See attached photos with indicated sizes, verify in field.
http://www.dkdesign.cc/
Addendum No. 2
Door 101D – Hollow Metal Door with 9” x 39” Lite
Doors 110C & D – Aluminum Doors and Frame – Overall frame is 8’-10” W x 9’-3” H
Door 111B – Hollow Metal Door with 8” x 38” Lite and Frame - Overall frame is 5’-4” W x 7’-4” H
Middle School Office Window – Hollow Metal Frame - Overall frame is 2’-8” W x 4’-0” H
Door 121B – Hollow Metal Door and Frame – Overall frame is 6’-6” W x 7’-4” H
END OF ADDENDUM NO. 2
PART 1 - GENERAL
1.1 CONDITIONS AND REQUIREMENTS
A. The General Conditions, Supplementary Conditions, and Division 01 – General Requirements apply.
1.2 SAFETY & SECURITY FILM SECTION INCLUDES
A. Safety-and-Security Film: LLumar® SCL SR PS8 Safety-and-Security Film: Transparent film applied to glass to provide shatter resistance, resistance to forced entry, increase safety during blast occurrence, and increase safety during an accidental impact meeting safety glazing standards.
B. 1. Llumar Clear 13 Mil:
a) Clear safety and security film, SCL SR PS13
2. Film Attachment Systems:
a) Wet Glaze type- DowSil 995 Silicone Structural Sealant.
b) Mechanical type- Madico GullWing or Pentagon Protection US.
1.3 REFERENCES
A. American National Standards Institute (ANSI)
1. ANSI Z97.1 - Safety Glazing Materials Used In Buildings - Safety Performance Specifications and Methods of Test.
B. Consumer Products Safety Council (CPSC):
1. CPSC Part 1201 - Safety Standard for Architectural Glazing Materials.
C. C. General Services Administration (GSA) Performance Criteria:
1. GSA TS01 2003 - Standard Test Method for Glazing and Window Systems Subject to Dynamic Overpressure Loadings.
D. International Window Film Association (IWFA):
1. Architectural Visual Inspection Standard For Applied Window Film
E. ASTM International (ASTM):
1. ASTM C1184 - Standard Specification for Structural Silicone Sealants.
2. ASTM E84 - Standard Test Method for Surface Burning Characteristics of Building
Materials.
3. ASTM E1886 - Standard Test Methods for Performance of Exterior Windows, Curtain
Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials
4. ASTM E1996 - Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes
5. ASTM D882 - Standard Test Method For Tensile Properties Of Thin Plastic Sheeting
6. ASTM D1004 - Standard Test Method For Tear Resistance (Graves Tear) Of Plastic Film
And Sheeting
7. ASTM D4830 - Standard Test Methods for Characterizing Thermoplastic Fabrics Used in
Roofing and Waterproofing
F. EN 356 - Glass in building. Security glazing. Testing and classification of resistance against manual attack.
G. EN 12600 - Glass in building. Pendulum test. Impact test method and classification for flat glass.
H. Architectural Visual Inspection Standard For Applied Window Film As Adopted By The IWFA
1.4 PERFORMANCE REQUIREMENTS
A. Safety Glazing Impact resistance:
1. Impact Resistance - Provide films that when applied to 1/4-inch annealed glass, passes the impact test requirements of ANSI Z97.1 Class A and CPSC 16 CFR 1201 Category II as a safety glazing.
2. When tested according to EN 12600 using 4mm annealed glass, achieves Level 1(b)1 on the film side and 2(b)2 on the glass side.
B. Blast Resistance (performance to GSA TS-01):
1. Blast resistance for film applied on a window with 1/4 inch (6 mm) thick annealed glass that has daylight opening of approximately 42.5 inches (108 cm) wide by 60.5 inches (154 cm) high with the use of a structural silicone attachment system (Wet Glaze) on 4 sides, test pressure a minimum of 6psi with a minimum 38psi-msec impulse: GSA Performance Condition: Level 2.
2. Blast resistance for film applied on a window with 1/4 inch (6 mm) thick annealed glass panes, dual pane window that has daylight opening of approximately 42.5 inches (108
cm) wide by 60.5 inches (154 cm) with theuse of a structural silicone attachment system (Wet Glaze) on 4 sides test pressure a minimum of 6psi with a minimum 38psi-msec impulse GSA Performance Condition: Level 2.
C. Windstorm mitigation:
1. Windstorm mitigation for film applied on 1 inch nominal insulated glass units comprised of 1/4 inch (6 mm) thick annealed glass using structural silicone attachment (wet glaze) system, impact with Level C Missile, 50 psf maximum pressure; tested in accordance with ASTM E1886 and ASTM E1996.
D. Forced-Entry Protection:
1. Meets EN356 Level P2A performance with drop height of 3000 mm on 4.2mm or thicker, single pane, monolithic (non-laminated, non-tempered) glass. Test report must indicate that samples passed with all impacts on the non-filmed side. Test report must also indicate that all 3 samples passed at the P2A level, with three impacts per sample, for a total of 9 impacts from a distance of 3000 mm or greater with a passing assessment on all impacts.
1.5 SUBMITTALS
A. Product Data: Submit for each product specified indicating:
1. Performance properties.
2. Preparation and installation instructions and recommendations.
3. Storage and handling recommendations.
B. Samples: For each type of safety-and-security film specified, two (2) samples, routh 8 x 12 inches square.
C. Qualification Data: Submit documentation indicating qualifications of safety-and-security film manufacturer.
D. Operation and Maintenance Data: Submit for safety-and-security control film to include in maintenance manuals.
E. Warranty: Submit sample special warranty specified in this section.
1.6 QUALITY ASSURANCE
A. Manufacturer Qualifications: A qualified manufacturer that has a minimum of 10 years of documented experience manufacturing safety-and-security films similar to be used for this project.
B. Installer Qualifications: A firm that is authorized by safety-and-security film manufacturer to install film in accordance with guidelines set forth by the manufacturer.
C. Source Limitations: Obtain each type of safety-and-security film from same manufacturer.
1.7 DELIVERY, STORAGE AND HANDLING
A. Deliver, store and handle materials in manufacturer's protective packaging.
B. Store and protect materials according to manufacturer's written recommendations to prevent damage from condensation, temperature changes, direct exposure to sun, or other causes.
1.8 SITE CONDITIONS
A. Ambient Conditions: Maintain temperature, humidity, and ventilation within limits recommended by manufacturer.
1.9 LIMITED WARRANTY
A. Manufacturer's Limited Warranty: Certain restrictions apply. The Manufacturer’s Limited Warranty can be viewed in full by clicking here.
PART 2 - PRODUCTS
2.1 MANUFACTURERS
A. Basis-of-Design Product: The design for safety and security films is based on LLumar® Safety and Security films sold by an Eastman Performance Films, LLC, 575 Maryville Centre Drive, St.
Louis, Missouri 63141; Telephone: 800-851-7781 (Option 1);
https://northamerica.llumar.com/contact-llumar; Web Site: www.llumar.com.
B. Representative: Eastman Llumar Films - Contact Steve Debusk (276) 627-3234.
C. Substitutions will be considered, subject to compliance with requirements of this section, under provisions of Section 01 60 00.
2.2 SAFETY-AND-SECURITY FILMS
A. Safety-and-Security Film: LLumar® SCL SR PS13 Safety-and-Security Film with the following performance characteristics when applied to the interior surface of single-pane, 1/8-inch clear glass:
% Total Solar Transmittance 80 % Total Solar Reflectance 9 % Total Solar Absorptance 11 % Visible Light Transmission 88 % Visible Light Reflection - Exterior 10 % Visible Light Reflection - Interior 10 Winter U-Value 1.06 Shading Coefficient 0.96 % Ultraviolet Ray Protection (300nm-380nm) >99 Emissivity 0.90 Solar Heat Gain Coefficient 0.83 % Total Solar Energy Rejected 17 Light-to-Solar Heat Gain Ratio 1.06 % Summer Solar Heat Reduction 3 % Winter Heat Loss Reduction -2 % Glare Reduction 2 Thickness without Liner 0.013 inches Film Color Clear
2.3 SAFETY-AND-SECURITY FILM ACCESSORIES
A. General: Provide accessories either manufactured by or acceptable to safety-and-security film manufacturer for application indicated, and with a proven record of compatibility with surfaces contacted in installation.
B. Adhesive: Pressure sensitive adhesive which is activated by pressure and water. It is characterized by its permanently tacky nature and its installation ease. Protect adhesive from contamination by applying a release liner that will be removed and discarded at installation.
https://llumar.com/content/dam/eastman/performance-films/llumar/nar/documents/english/arch/llumar-arch-warranty.pdf https://northamerica.llumar.com/contact-llumar http://www.llumar.com
C. Cleaners, Primers, and Sealers: Types recommended by safety-and-security film manufacturer.
PART 3 - EXECUTION
3.1 EXAMINATION
A. Examine substrates for compliance with requirements and for conditions affecting performance of safety-and-security film including glass that is broken, chipped, cracked, abraded, or damaged in any way.
B. Proceed with installation only after unsatisfactory conditions have been corrected.
3.2 PREPARATION
A. Comply with manufacturer’s written instructions for surface preparation.
B. Clean substrates thoroughly prior to installation.
C. Prepare substrates using methods recommended by film manufacturer to achieve the best results for the substrate under project conditions.
D. Protect window frames and surrounding surfaces to prevent damage during installation.
3.3 INSTALLATION
A. Install in accordance with manufacturer’s written instructions.
B. Install with no gaps or overlaps.
C. If seamed, make seams non-overlapping.
D. Do not remove release liner from film until just before each piece of film is cut and ready for installation.
E. Custom cut to the glass with neat, square corners and edges to within 1/8-inch of the window frame.
F. Remove air bubbles, blisters, and other defects. Be careful to remove “fingers” to eliminate any contamination or excess water pockets. It is crucial to remove as much water as possible during installation.
3.4 FIELD QUALITY CONTROL
A. After installation, view film from a distance of 10 feet against a bright uniform sky or background. Film shall appear uniform in appearance with no visible streaks, wrinkles, banding, thin spots or pinholes.
B. If installed film does not meet these criteria, remove and replace with new film.
3.5 CLEANING AND PROTECTION
A. Remove excess mounting solution at finished seams, perimeter edges, and adjacent surfaces.
B. Use cleaning methods recommended by safety-and-security film manufacturer.
C. Replace films that cannot be cleaned.
D. Protect installed products until completion of project.
E. Touch-up, repair or replace damaged products before Substantial Completion.
END OF SECTION
D1.1
ARCHITECTURE
CONSTRUCTION MANAGEMENT
DEVELOPMENT
1104 S. MITCHELL ST.
CADILLAC, MICHIGAN 49601
(231) 779-4002
(231) 779-4022 FAX
ARCHITECT OF RECORD:
DRAWN BY:
PROJECT NUMBER:
SHEET NUMBER:
DATE ISSUED:
S. Kleinsorge
K. Taylor
Nov. 20, 2023 Bidding & Construction
Dec. 1, 2023 Addendum #1
Dec. 11, 2023 Addendum #2
23125
P r o p o s e d
O f f i c
S c u r
E n t r a n c e s f o r
M c B a i
R u r a l
A g r i c u l t u r a l
S c h o o l
E a s t
M a p l e
S t r e e t
M c B a i n
M
I
E l e m e n t a r y
M i d d l
H g h
S c h o o l
AutoCAD SHX Text
AutoCAD SHX Text D1.1
AutoCAD SHX Text %%uPARTIAL PLAN - ELEMENTARY
AutoCAD SHX Text 1/4" = 1'-0"
AutoCAD SHX Text
NORTH
AutoCAD SHX Text REMOVE EXISTING MASONRY AS REQ'D TO INSTALL NEW DOOR, FRAME, & HEADER, SEE PLANS AND DOOR SCHEDULE FOR SIZE. NEW OPENING SHALL FALL ON EX. MASONRY COURSING.
AutoCAD SHX Text
EX. LOUNGE
AutoCAD SHX Text
EX. CORR.
AutoCAD SHX Text
EX. VEST
AutoCAD SHX Text
EX. CONFERENCE
AutoCAD SHX Text
EX. HEALTH
AutoCAD SHX Text
EX. OFFICE
AutoCAD SHX Text
EX. OFFICE
AutoCAD SHX Text
EX. STORAGE
AutoCAD SHX Text
EX. RECEPT. OFFICE
AutoCAD SHX Text
EX. CL.
AutoCAD SHX Text
EX. CL.
AutoCAD SHX Text
DEMOLITION
AutoCAD SHX Text REMOVE / REWORK EX. BASE HEAT COVER AS REQ'D TO INSTALL NEW MILLWORK, SEE NEW WORK PLANS.
AutoCAD SHX Text
EX. HALL
AutoCAD SHX Text BASE BID: ALL EXISTING FLOORING, BASE TRIM, DROP CEILINGS, LIGHTING, & MECH. DIFFUSERS SHALL REMAIN IN MIDDLE SCHOOL & ELEMENTARY OFFICE AREAS. PROTECT DURING DEMOLITION & NEW WORK. ALTERNATE #2: AT MIDDLE SCHOOL & ELEMENTARY OFFICE AREAS, REMOVE EXISTING FLOORING, BASE TRIM, DROP CEILINGS, LIGHTING, & MECH. DIFFUSERS IN EX. VESTIBULE, EX. RECEPTION OFFICE, EX. HALL, EX. STORAGE ROOM, EX. OFFICES, EX. CLOSETS, EX. HEALTH & EX. CONFERENCE, SEE ROOM FINISH SCHEDULE, REFLECTED CEILING PLANS, & ME PLANS.
AutoCAD SHX Text
ALT. #2
AutoCAD SHX Text
AutoCAD SHX Text D2.0
AutoCAD SHX Text
SIM.
AutoCAD SHX Text NOTE: EXISTING ARCHITECTURAL PLANS DERIVED FROM EXISTING CONSTRUCTION DOCUMENTS FROM JAYE R MILLER ARCHITECT, JOB# 9702, DATED 2-12-98. FIELD VERIFY ALL EXISTING CONDITION(S).
AutoCAD SHX Text
REMOVE EXISTING DOORS & FRAME, COMPLETE
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text D1.1
AutoCAD SHX Text %%uPARTIAL PLAN - MIDDLE SCHOOL
AutoCAD SHX Text 1/4" = 1'-0"
AutoCAD SHX Text
NORTH
AutoCAD SHX Text REMOVE EXISTING WINDOW, HEADER, & MASONRY AS REQ'D TO INSTALL NEW DOOR, FRAME, & HEADER, SEE PLANS AND DOOR SCHEDULE FOR SIZE.
AutoCAD SHX Text
EX. STORAGE
AutoCAD SHX Text
EX. VEST
AutoCAD SHX Text
EX. BOYS
AutoCAD SHX Text
EX. GIRLS
AutoCAD SHX Text
EX. RECEPT. OFFICE
AutoCAD SHX Text
EX. CONFERENCE
AutoCAD SHX Text
EX. HEALTH
AutoCAD SHX Text
EX. OFFICE
AutoCAD SHX Text
EX. OFFICE
AutoCAD SHX Text
EX. CLASS ROOM
AutoCAD SHX Text
EX. CORR.
AutoCAD SHX Text
EX. CL.
AutoCAD SHX Text
DEMOLITION
AutoCAD SHX Text REMOVE / REWORK EX. BASE HEAT COVER AS REQ'D TO INSTALL NEW MILLWORK, SEE NEW WORK PLANS.
AutoCAD SHX Text
EX. HALL
AutoCAD SHX Text
AutoCAD SHX Text D2.0
AutoCAD SHX Text NOTE: EXISTING ARCHITECTURAL PLANS DERIVED FROM EXISTING CONSTRUCTION DOCUMENTS FROM GMB ARCHITECTS & ENGINEERS, JOB# 4682, DATED 4-30-01. FIELD VERIFY ALL EXISTING CONDITION(S).
AutoCAD SHX Text GENERAL DEMOLITION NOTES: 1. CONTRACTOR TO VERIFY ALL EXISTING CONDITIONS PRIOR TO THE START OF DEMOLITION ACTIVITIES. CONTRACTOR TO VERIFY ALL EXISTING CONDITIONS PRIOR TO THE START OF DEMOLITION ACTIVITIES. 2. PROVIDE ALL SHORING AND BRACING AS REQ'D DURING DEMOLITION. PROVIDE ALL SHORING AND BRACING AS REQ'D DURING DEMOLITION. 3. PROVIDE PROTECTION FOR EXISTING CONSTRUCTION TO REMAIN. PATCH AND REPAIR ALL AREAS DAMAGED DURING DEMOLITION / PROVIDE PROTECTION FOR EXISTING CONSTRUCTION TO REMAIN. PATCH AND REPAIR ALL AREAS DAMAGED DURING DEMOLITION / CONSTRUCTION. MATCH EXISTING CONSTRUCTION, MATERIALS AND FINISHES. TYPICAL AT ALL LOCATIONS. 4. EACH CONTRACTOR INVOLVED IN DEMOLITION SHALL REMOVE AND PROPERLY DISPOSE OF ALL REFUSE AND MATERIALS FROM EACH CONTRACTOR INVOLVED IN DEMOLITION SHALL REMOVE AND PROPERLY DISPOSE OF ALL REFUSE AND MATERIALS FROM DEMOLITION OPERATION. 5. DEMOLITION FOR INSTALLATION OF MECHANICAL, ELECTRICAL, AND PLUMBING ITEMS SHALL BE PROVIDED BY THE TRADE INSTALLING DEMOLITION FOR INSTALLATION OF MECHANICAL, ELECTRICAL, AND PLUMBING ITEMS SHALL BE PROVIDED BY THE TRADE INSTALLING THOSE ITEMS OR AS DIRECTED BY THE GENERAL CONTRACTOR. SEE MECHANICAL, ELECTRICAL, AND PLUMBING FOR ADDITIONAL DEMOLITION INFORMATION. TRADE PROVIDING DEMOLITION SHALL PATCH EXISTING TO REMAIN AS REQ'D.
AutoCAD SHX Text
A1.0
ARCHITECTURE
CONSTRUCTION MANAGEMENT
DEVELOPMENT
1104 S. MITCHELL ST.
CADILLAC, MICHIGAN 49601
(231) 779-4002
(231) 779-4022 FAX
ARCHITECT OF RECORD:
DRAWN BY:
PROJECT NUMBER:
SHEET NUMBER:
DATE ISSUED:
S. Kleinsorge
K. Taylor
Nov. 20, 2023 Bidding & Construction
Dec. 1, 2023 Addendum #1
Dec. 11, 2023 Addendum #2
23125
P r o p o s f i c c u r t r a n c e s f o r
M c B a r a l
A g r i c u l t u r a l
S c h o o l
E a s t
M a p l e
S t r e e t
M c B a i n
M
I
E l e m e n t a r y
M i d d l g h
S c h o o l
AutoCAD SHX Text
EX. STAIR
AutoCAD SHX Text
EX. LIBR.
AutoCAD SHX Text
EX. LIBR.
AutoCAD SHX Text
EX. SHOP STORAGE
AutoCAD SHX Text
EX. STORAGE
AutoCAD SHX Text
EX. CORR.
AutoCAD SHX Text
EX. SHOP
AutoCAD SHX Text
EX. CORR.
AutoCAD SHX Text
ALTERNATE #1
AutoCAD SHX Text
NEW
AutoCAD SHX Text
%%UCONFERENCE
AutoCAD SHX Text
AutoCAD SHX Text INFILL EX. DOOR & WINDOW OPENINGS w/ CMU TO MATCH EX.
AutoCAD SHX Text INFILL EX. DOOR OPENING w/ CMU TO MATCH EX.
AutoCAD SHX Text
NEW ELEC SUB. PANEL
AutoCAD SHX Text
AutoCAD SHX Text 101A
AutoCAD SHX Text 101B
AutoCAD SHX Text 101D
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
ETR
AutoCAD SHX Text
ETR
AutoCAD SHX Text 101C
AutoCAD SHX Text B4
AutoCAD SHX Text B4.1
AutoCAD SHX Text
ALIGN EDGE OF NEW WALL WITH DOOR OPENING
AutoCAD SHX Text
NORTH
AutoCAD SHX Text
PARTIAL PLAN - HIGH SCHOOL
AutoCAD SHX Text
SCALE 1/4" = 1'-0"
AutoCAD SHX Text
NEW WORK
AutoCAD SHX Text
NEW
AutoCAD SHX Text
%%UBREAK ROOM
AutoCAD SHX Text
AutoCAD SHX Text
PRINCIPAL'S
AutoCAD SHX Text
%%UOFFICE
AutoCAD SHX Text
AutoCAD SHX Text
SOCIAL
AutoCAD SHX Text
%%UOFFICE
AutoCAD SHX Text
AutoCAD SHX Text
36" FRIDGE
AutoCAD SHX Text
NEW
AutoCAD SHX Text
%%UVEST.
AutoCAD SHX Text
AutoCAD SHX Text
NEW RECEPT.
AutoCAD SHX Text
%%UOFFICE
AutoCAD SHX Text
AutoCAD SHX Text
DEAD
AutoCAD SHX Text
%%UFILE STORAGE
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text A3.0
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text A3.0
AutoCAD SHX Text
COUNSELOR'S
AutoCAD SHX Text
%%UOFFICE
AutoCAD SHX Text
AutoCAD SHX Text
NEW B.F.
AutoCAD SHX Text
%%UTOILET
AutoCAD SHX Text
AutoCAD SHX Text
%%UHALL
AutoCAD SHX Text
AutoCAD SHX Text 2840-A
AutoCAD SHX Text
PRINTER
AutoCAD SHX Text
AutoCAD SHX Text BASE BID: NO WORK SHALL BE DONE IN NEW CONFERENCE 109 ALTERNATE #1: ALL WORK SHOWN IN NEW CONFERENCE 109 SHALL BE BID AS ALTERNATE #1.
AutoCAD SHX Text THESE (2) WALLS MUST EXTEND FROM CONC. SLAB TO B.O. ROOF DECK. PROVIDE FIRE SEALANT @ TOP & BOTTOM OF WALL AND @ ALL PENETRATIONS.
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text A3.0
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text A3.0
AutoCAD SHX Text
ETR
AutoCAD SHX Text
ETR
AutoCAD SHX Text THESE (2) WALLS MUST EXTEND FROM CONC. SLAB TO B.O. ROOF DECK. PROVIDE ACOUSTIC SEALANT @ TOP & BOTTOM OF WALL AND @ ALL PENETRATIONS.
AutoCAD SHX Text
PATCH MASONRY WALLS AS REQ'D FOR SMOOTH FINISH SURFACE @ REMOVED WALL
AutoCAD SHX Text
PATCH MASONRY AS REQ'D FOR SMOOTH FINISH SURFACE @ REMOVED DOOR
AutoCAD SHX Text
TOOTH IN NEW CMU & BRICK AS REQ'D FOR SMOOTH FINISH AT JAMBS OF NEW DOOR OPENING
AutoCAD SHX Text C4
AutoCAD SHX Text C4
AutoCAD SHX Text A6
AutoCAD SHX Text A4
AutoCAD SHX Text A4.1
AutoCAD SHX Text A4.1
AutoCAD SHX Text A4.1
AutoCAD SHX Text
ALIGN EDGE OF NEW WALL WITH EX. DOOR OPENING
AutoCAD SHX Text C4
AutoCAD SHX Text C4
AutoCAD SHX Text B1
AutoCAD SHX Text B1
AutoCAD SHX Text B1
AutoCAD SHX Text B1
AutoCAD SHX Text B1
AutoCAD SHX Text B1
AutoCAD SHX Text B1
AutoCAD SHX Text
ALT. #1
AutoCAD SHX Text
AutoCAD SHX Text A2.0
AutoCAD SHX Text
AutoCAD SHX Text A2.0
AutoCAD SHX Text
AutoCAD SHX Text A2.0
AutoCAD SHX Text
AutoCAD SHX Text A2.0
AutoCAD SHX Text
AutoCAD SHX Text A2.0
AutoCAD SHX Text 2840-B
AutoCAD SHX Text 2656-A
AutoCAD SHX Text 2656-B
AutoCAD SHX Text
TOOTH IN NEW CMU & BRICK AS REQ'D FOR SMOOTH FINISH AT JAMBS OF NEW DOOR OPENING
AutoCAD SHX Text TOOTH IN NEW CMU & BRICK AS REQ'D FOR SMOOTH FINISH AT JAMBS OF NEW WINDOW OPENING
AutoCAD SHX Text NOTE: REMOVE EXISTING ROOF MOUNTED EXHAUST FAN, SEE MECH. DRAWING FOR MORE INFORMATION. PATCH ROOF AS REQ'D TO BE WATER TIGHT @ REMOVED FAN / CURB.
AutoCAD SHX Text B1
AutoCAD SHX Text
TOOTH IN NEW BRICK AS REQ'D FOR SMOOTH FINISH AT JAMBS OF NEW WINDOW OPENING
AutoCAD SHX Text B1
AutoCAD SHX Text
NEW STEEL POST WALL SUPPORT, SEE STRUCTURAL
AutoCAD SHX Text A4.2
AutoCAD SHX Text A4.2
AutoCAD SHX Text
SEMI-RECESSED F.E.C. @ HALL SIDE
AutoCAD SHX Text NOTE: NEW ELECTRICAL WORK SHALL BE CONCEALED WITH-IN EXISTING WALLS (CMU or METAL STUD/ GYP. BD.) OR NEW WALLS (METAL STUD/ GYP. BD.). PATCH / REPAIR EX. WALLS AS REQ'D.
AutoCAD SHX Text
PROVIDE SECURITY FILM ON EXISTING DOOR GLAZING
AutoCAD SHX Text
AutoCAD SHX Text INTERIOR 1 HOUR FIRE SEPARATION WALL - UL U419 }" TYPE "X" GYPSUM BOARD 3}" METAL STUDS @ 16" O.C. }" TYPE "X" GYPSUM BOARD
AutoCAD SHX Text INTERIOR METAL STUD SOUND WALL }" SOUND BREAK XP GYPSUM BOARD 3}" METAL STUDS @ 16" O.C. ACOUSTICAL SEALANT @ SILL PLATE SOUND BATT INSULATION }" SOUND BREAK XP GYPSUM BOARD
AutoCAD SHX Text
WALL TYPES LEGEND
AutoCAD SHX Text INTERIOR METAL STUD SOUND WALL }" SOUND BREAK XP GYPSUM BOARD 3}" METAL STUDS @ 16" O.C. ACOUSTICAL SEALANT @ SILL PLATE SOUND BATT INSULATION 1" AIR GAP EX. CMU WALL
AutoCAD SHX Text INTERIOR METAL STUD CHASE WALL }" GYPSUM BOARD 3}" METAL STUDS @ 16" O.C. EX. CMU WALL
AutoCAD SHX Text A4
AutoCAD SHX Text B4
AutoCAD SHX Text B4.1
AutoCAD SHX Text A6
AutoCAD SHX Text A4.2
AutoCAD SHX Text A4.1
AutoCAD SHX Text B1
AutoCAD SHX Text C4
AutoCAD SHX Text NOTE: ALL COMPONENTS OF NEW INTERIOR WALLS SHALL EXTEND FROM CONC. FLOOR SLAB TO UNDERSIDE OF ROOF DECK ABOVE, U.N.O. ON PLAN. PROVIDE DIAGONAL BRACING @ 32" O.C. ABOVE CEILING TO ROOF STRUCTURE ABOVE.
AutoCAD SHX Text INTERIOR STUD SOUND WALL }" GYPSUM BOARD 6" METAL STUDS @ 16" O.C. ACOUSTICAL SEALANT @ SILL PLATE SOUND BATT INSULATION }" GYPSUM BOARD
AutoCAD SHX Text INTERIOR 2 HOUR FIRE SEPARATION WALL - UL U419 (2) LAYERS }" TYPE "X" GYPSUM BOARD 3}" 25 GA. METAL STUDS @ 24" O.C. 25 GA. METAL STUDS @ 24" O.C. 3\" UNFACED FIBERGLASS BATT INSULATION (2) LAYERS }" TYPE "X" GYPSUM BOARD
AutoCAD SHX Text INTERIOR METAL STUD CHASE WALL }" GYPSUM BOARD ]" METAL HAT CHANNEL @ 16" O.C. EX. CMU WALL
AutoCAD SHX Text INTERIOR METAL STUD WALL - REINFORCED }" GYPSUM BOARD \" FIRE TREATED PLYWOOD SHEATHING 3}" METAL STUDS @ 16" O.C. }" GYPSUM BOARD
AutoCAD SHX Text
NAME
AutoCAD SHX Text
FLOOR
AutoCAD SHX Text
ROOM FINISH SCHEDULE
AutoCAD SHX Text
WALL
AutoCAD SHX Text
NO.
AutoCAD SHX Text
ROOMS
AutoCAD SHX Text
FIN.
AutoCAD SHX Text
BASE
AutoCAD SHX Text
MAT'L
AutoCAD SHX Text
FIN.
AutoCAD SHX Text
CEILING
AutoCAD SHX Text
HT.
AutoCAD SHX Text
MAT'L
AutoCAD SHX Text
FIN.
AutoCAD SHX Text
REMARKS
AutoCAD SHX Text NOTES: 1. VERIFY & COORDINATE ALL FINISHES W/ OWNER PRIOR VERIFY & COORDINATE ALL FINISHES W/ OWNER PRIOR TO THE START OF CONSTRUCTION. 2. SEE INTERIOR ELEVATIONS & REFLECTED CEILING PLANS SEE INTERIOR ELEVATIONS & REFLECTED CEILING PLANS FOR ADDITIONAL INFORMATION. 3. SEE SPECIFICATIONS FOR MATERIAL DETAILS & FINISHES.SEE SPECIFICATIONS FOR MATERIAL DETAILS & FINISHES.
AutoCAD SHX Text LEGEND: ACT ACOUSTICAL CEILING TILE ACOUSTICAL CEILING TILE CPT CARPET CARPET WO CPT WALK-OFF CARPET TILE WALK-OFF CARPET TILE ETR EXISTING TO REMAIN EXISTING TO REMAIN EX. CMU EXISTING CMU EXISTING CMU FF FACTORY FINISH FACTORY FINISH GYP GYPSUM DRYWALL GYPSUM DRYWALL S CONC SEALED CONCRETE SEALED CONCRETE MATCH EX. MATCHED EXISTING REMOVED VB VINYL BASEVINYL BASE
AutoCAD SHX Text
EX. VESTIBULE
AutoCAD SHX Text
EX. RECEPT. OFFICE
AutoCAD SHX Text
EX. CONFERENCE
AutoCAD SHX Text
EX. VESTIBULE
AutoCAD SHX Text
EX. RECEPT. OFFICE
AutoCAD SHX Text
NEW VESTIBULE
AutoCAD SHX Text
NEW RECEPT. OFFICE
AutoCAD SHX Text
PRINCIPAL'S OFFICE
AutoCAD SHX Text
COUNSELOR'S OFFICE
AutoCAD SHX Text
NEW B.F. TOILET
AutoCAD SHX Text
DEAD FILE STORAGE
AutoCAD SHX Text
NEW CONFERENCE
AutoCAD SHX Text
HALL
AutoCAD SHX Text
NEW BREAK ROOM
AutoCAD SHX Text
SOCIAL OFFICE
AutoCAD SHX Text
EX. HALL
AutoCAD SHX Text
EX. STORAGE
AutoCAD SHX Text
EX. OFFICE
AutoCAD SHX Text
EX. CLOSET
AutoCAD SHX Text
EX. OFFICE
AutoCAD SHX Text
EX. HEALTH
AutoCAD SHX Text
EX. CONFERENCE
AutoCAD SHX Text
EX. STORAGE
AutoCAD SHX Text
EX. OFFICE
AutoCAD SHX Text
EX. HALL
AutoCAD SHX Text
EX. CLOSET
AutoCAD SHX Text
EX. CLOSET
AutoCAD SHX Text
EX. OFFICE
AutoCAD SHX Text
EX. HEALTH
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 111A
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
WO CPT
AutoCAD SHX Text
ACT
AutoCAD SHX Text
ACT
AutoCAD SHX Text
ACT
AutoCAD SHX Text
ACT
AutoCAD SHX Text
ACT
AutoCAD SHX Text
ACT
AutoCAD SHX Text
ACT
AutoCAD SHX Text
ACT
AutoCAD SHX Text
ACT
AutoCAD SHX Text
ACT
AutoCAD SHX Text
ACT
AutoCAD SHX Text
ACT
AutoCAD SHX Text
ACT
AutoCAD SHX Text
ACT
AutoCAD SHX Text
ACT
AutoCAD SHX Text
ACT
AutoCAD SHX Text
ACT
AutoCAD SHX Text
ACT
AutoCAD SHX Text
ACT
AutoCAD SHX Text
ACT
AutoCAD SHX Text
ACT
AutoCAD SHX Text
ACT
AutoCAD SHX Text
ACT
AutoCAD SHX Text
ACT
AutoCAD SHX Text
ACT
AutoCAD SHX Text
ACT
AutoCAD SHX Text
ACT
AutoCAD SHX Text
ACT
AutoCAD SHX Text
ACT
AutoCAD SHX Text
FF
AutoCAD SHX Text
FF
AutoCAD SHX Text
FF
AutoCAD SHX Text
FF
AutoCAD SHX Text
FF
AutoCAD SHX Text
FF
AutoCAD SHX Text
FF
AutoCAD SHX Text
FF
AutoCAD SHX Text
FF
AutoCAD SHX Text
FF
AutoCAD SHX Text
FF
AutoCAD SHX Text
FF
AutoCAD SHX Text
FF
AutoCAD SHX Text
FF
AutoCAD SHX Text
FF
AutoCAD SHX Text
FF
AutoCAD SHX Text
FF
AutoCAD SHX Text
FF
AutoCAD SHX Text
FF
AutoCAD SHX Text
FF
AutoCAD SHX Text
FF
AutoCAD SHX Text
FF
AutoCAD SHX Text
FF
AutoCAD SHX Text
FF
AutoCAD SHX Text
FF
AutoCAD SHX Text
FF
AutoCAD SHX Text
FF
AutoCAD SHX Text
FF
AutoCAD SHX Text
FF
AutoCAD SHX Text 9'-0"
AutoCAD SHX Text
VINYL/CPT
AutoCAD SHX Text 10'-0"
AutoCAD SHX Text 10'-0"
AutoCAD SHX Text 10'-0"
AutoCAD SHX Text 9'-0"
AutoCAD SHX Text 9'-0"
AutoCAD SHX Text 9'-0"
AutoCAD SHX Text 9'-0"
AutoCAD SHX Text 9'-0"
AutoCAD SHX Text 9'-0"
AutoCAD SHX Text
CPT
AutoCAD SHX Text
CPT
AutoCAD SHX Text
CPT
AutoCAD SHX Text
VINYL
AutoCAD SHX Text
S CONC
AutoCAD SHX Text
VINYL
AutoCAD SHX Text
CPT
AutoCAD SHX Text
PAINT
AutoCAD SHX Text
PAINT
AutoCAD SHX Text
CPT
AutoCAD SHX Text
PAINT
AutoCAD SHX Text
PAINT
AutoCAD SHX Text
PAINT
AutoCAD SHX Text
PAINT
AutoCAD SHX Text
PAINT
AutoCAD SHX Text
PAINT
AutoCAD SHX Text
PAINT
AutoCAD SHX Text
EX. CMU/GYP
AutoCAD SHX Text
PAINT
AutoCAD SHX Text
WO CPT
AutoCAD SHX Text
VINYL
AutoCAD SHX Text
CPT
AutoCAD SHX Text
VINYL
AutoCAD SHX Text
CPT
AutoCAD SHX Text
CPT
AutoCAD SHX Text
CPT
AutoCAD SHX Text
VINYL/CPT
AutoCAD SHX Text
CPT
AutoCAD SHX Text
ETR
AutoCAD SHX Text
CPT
AutoCAD SHX Text
CPT
AutoCAD SHX Text
CPT
AutoCAD SHX Text
CPT
AutoCAD SHX Text
CPT
AutoCAD SHX Text
CPT
AutoCAD SHX Text
WO CPT
AutoCAD SHX Text
VINYL/CPT
AutoCAD SHX Text
VINYL
AutoCAD SHX Text
VINYL
AutoCAD SHX Text
MATCH EX.
AutoCAD SHX Text
WINDOW SCHEDULE
AutoCAD SHX Text 2656-A
AutoCAD SHX Text 2840-A
AutoCAD SHX Text 2656-B
AutoCAD SHX Text
ALUMINUM CASEMENT WINDOW
AutoCAD SHX Text
ALUMINUM CASEMENT WINDOW
AutoCAD SHX Text
STOREFRONT ALUMINUM FRAME FIXED WINDOW
AutoCAD SHX Text 2840-B
AutoCAD SHX Text
HM FRAME FIXED WINDOW 20 MIN. RATED
AutoCAD SHX Text
PROVIDE ONE WAY GLASS OR FILM
AutoCAD SHX Text
NOTE: PROVIDE SAFETY FILM ON ALL GLAZING. PROVIDE SAFETY FILM ON ALL GLAZING.
AutoCAD SHX Text
AutoCAD SHX Text
NOT USED
AutoCAD SHX Text
MATCH EX.
AutoCAD SHX Text
MATCH EX.
AutoCAD SHX Text
MATCH EX.
AutoCAD SHX Text
MATCH EX.
AutoCAD SHX Text
MATCH EX.
AutoCAD SHX Text
MATCH EX.
AutoCAD SHX Text
MATCH EX.
AutoCAD SHX Text
MATCH EX.
AutoCAD SHX Text
MATCH EX.
AutoCAD SHX Text
MATCH EX.
AutoCAD SHX Text
MATCH EX.
AutoCAD SHX Text
MATCH EX.
AutoCAD SHX Text
MATCH EX.
AutoCAD SHX Text
MATCH EX.
AutoCAD SHX Text
MATCH EX.
AutoCAD SHX Text
MATCH EX.
AutoCAD SHX Text
MATCH EX.
AutoCAD SHX Text
MATCH EX.
AutoCAD SHX Text
PAINT
AutoCAD SHX Text
PAINT
AutoCAD SHX Text
PAINT
AutoCAD SHX Text
PAINT
AutoCAD SHX Text
PAINT
AutoCAD SHX Text
PAINT
AutoCAD SHX Text
PAINT
AutoCAD SHX Text
PAINT
AutoCAD SHX Text
PAINT
AutoCAD SHX Text
PAINT
AutoCAD SHX Text
PAINT
AutoCAD SHX Text
PAINT
AutoCAD SHX Text
EX. BRICK
AutoCAD SHX Text
PAINT
AutoCAD SHX Text
PAINT
AutoCAD SHX Text
PAINT
AutoCAD SHX Text
PAINT
AutoCAD SHX Text
PAINT
AutoCAD SHX Text
PAINT
AutoCAD SHX Text
ETR
AutoCAD SHX Text
ETR
AutoCAD SHX Text
ETR
AutoCAD SHX Text
ETR
AutoCAD SHX Text
ETR
AutoCAD SHX Text
ETR
AutoCAD SHX Text
ETR
AutoCAD SHX Text
ETR
AutoCAD SHX Text
ETR
AutoCAD SHX Text
ETR
AutoCAD SHX Text
ETR
AutoCAD SHX Text
ETR
AutoCAD SHX Text
ETR
AutoCAD SHX Text
ETR
AutoCAD SHX Text
ETR
AutoCAD SHX Text
ETR
AutoCAD SHX Text
ETR
AutoCAD SHX Text
ETR
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
SEE FLOOR PLANS FOR FLOORING TRANSISTION
AutoCAD SHX Text
SEE FLOOR PLANS FOR FLOORING TRANSISTION
AutoCAD SHX Text
SEE FLOOR PLANS FOR FLOORING TRANSISTION
AutoCAD SHX Text
4" VB
AutoCAD SHX Text
4" VB
AutoCAD SHX Text
4" VB
AutoCAD SHX Text
4" VB
AutoCAD SHX Text
4" VB
AutoCAD SHX Text
4" VB
AutoCAD SHX Text
4" VB
AutoCAD SHX Text
4" VB
AutoCAD SHX Text
4" VB
AutoCAD SHX Text
4" VB
AutoCAD SHX Text
EX. CMU/GYP
AutoCAD SHX Text
EX. CMU/GYP
AutoCAD SHX Text
EX. CMU/GYP
AutoCAD SHX Text
EX. CMU/GYP
AutoCAD SHX Text
EX. CMU/GYP
AutoCAD SHX Text
4" VB
AutoCAD SHX Text
4" VB
AutoCAD SHX Text
4" VB
AutoCAD SHX Text
4" VB
AutoCAD SHX Text
4" VB
AutoCAD SHX Text
4" VB
AutoCAD SHX Text
4" VB
AutoCAD SHX Text
4" VB
AutoCAD SHX Text
4" VB
AutoCAD SHX Text
4" VB
AutoCAD SHX Text
4" VB
AutoCAD SHX Text
4" VB
AutoCAD SHX Text
4" VB
AutoCAD SHX Text
4" VB
AutoCAD SHX Text
4" VB
AutoCAD SHX Text
4" VB
AutoCAD SHX Text
4" VB
AutoCAD SHX Text
4" VB
AutoCAD SHX Text
4" VB
AutoCAD SHX Text
DON'T PAINT EXISTING RED BRICK WALLS
AutoCAD SHX Text BASE BID: NO WORK SHALL BE DONE IN NEW CONFERENCE 109 ALTERNATE #1: ALL WORK SHOWN IN NEW CONFERENCE 109 SHALL BE BID AS ALTERNATE #1.
AutoCAD SHX Text
4" HEAD
AutoCAD SHX Text |" TEMP. SAFETY GLAZING w/ SECURITY FILM
AutoCAD SHX Text
GYP
AutoCAD SHX Text
GYP
AutoCAD SHX Text
EX. CMU/GYP
AutoCAD SHX Text
EX. CMU/GYP
AutoCAD SHX Text
ALTERNATE #1 & #2 SEE NOTES BELOW
AutoCAD SHX Text
ALT. #1 & #2
AutoCAD SHX Text BASE BID: ALL EXISTING FLOORING, BASE TRIM, DROP CEILINGS, LIGHTING, & MECH. DIFFUSERS SHALL REMAIN IN MIDDLE SCHOOL & ELEMENTARY OFFICE AREAS. PROTECT DURING DEMOLITION & NEW WORK. ALTERNATE #2: AT MIDDLE SCHOOL & ELEMENTARY OFFICE AREAS, PROVIDE NEW FLOORING, BASE TRIM, DROP CEILINGS, LIGHTING, & MECH. DIFFUSERS IN EX. VESTIBULE, EX. RECEPTION OFFICE, EX. HALL, EX. STORAGE ROOM, EX. OFFICES, EX. CLOSETS, EX. HEALTH & EX. CONFERENCE, SEE ROOM FINISH SCHEDULE, REFLECTED CEILING PLANS, & ME PLANS.
AutoCAD SHX Text |" FIRE LITE GLAZING w/ SECURITY FILM
AutoCAD SHX Text
AutoCAD SHX Text
General notes:
1. Contractor shall verify all existing field conditions and notify architect immediately if that which exists differs from that which is shown on drawings.
2. All work to comply with current Federal, State and Local codes, laws and ordinances.The requirements of ICC/ANSI A117.1 and the Americans with disabilities act (ADA) are to be fully satisfied. All work shall meet the most stringent requirements of both including, but not limited to clearances, limitations, accessories, etc.
3. These drawings are prepared in accordance with the limited services for which the architect was contracted. The architect makes no representation that the interpretation of these documents will result in complete compliance with the ADA.
4. All doors required to be labeled shall be set in labeled frames and identified with UL label and be provided with approved self-closing devices and positive latching hardware.
5. All designated exit doors shall be equipped with the required egress hardware.
6. Furnish hardware as scheduled without substitution, alternates may be approved by owner.
7. Furnish a keyed cylinder and two cut keys for each locking device specified; keyed to the Owners' Master Key System. Include key conference and key system schedule.
8. Furnish and provide all necessary reinforcements, brackets, fasteners, spacers and fillers to provide a complete functioning opening.
9. Provide complete shop drawings, submittals and cut sheets complying with DHI prescribed methods and vertical format double spaced hardware schedule.
10. All access control modules, fobs and readers, to be furnished by Security Vender under a separate section. Line voltage, circuits, cable and installation of power supplies for controllers and access control peripherals to be furnished and installed by electrical contractor.
Hardware Set 1 - Deadlatch x Push + Push Pull x EL Strike [Access Control & Timed] + Closer
3 ea. Butt Hinge 4B51 4 ½” x 4 ½” NRP 32D PBB
1 ea. Deadlatch 4510 x 4591 Push Paddle AL Adams Rite
1 ea. LSDA Mortise Cylinder (DL) 26D LSDA
1 set Push / Pull 1157147 x 4 134 Mount at loose ends 32D Don Jo
1 ea. Closer 7101 BC SCS Stop x DPPA-BS-NFB 689 PDQ
1 ea. Threshold S205A AL Reese
1 ea. Sweep 353A AL Reese
1 set Weatherstrip by Aluminum Door & Frame Supplier AL ADFS
1 ea. Electric Strike 7100/1 -510 (24VDC Continuous -Fail Secure)32D A Rite
1 ea. Power Supply 602RF x UR-1 Control Module ---- SDC
1 ea. Access Control Module, Timmer & Card Reader by Security Vender
Note: Access Control Module, Timmer & Card Reader and peripherals furnished by Security Vender, Coordinated by GC/CM.
Hardware Set 2 - Storeroom Lock x Electric Strike [Access Control & Video] + Closer
1 ea. Butt Hinge BB81 4 ½” x 4 ½” NRP 26D PBB
2 ea. Butt Hinge Stop BB81 x HPSC45 4 ½” x 4 ½” NRP 26D PBB
1 ea. Storeroom Lockset GT 115 MIA 26D PDQ
1 ea. LSDA KIL Cylinder 26D LSDA
1 ea. Closer 7101 BC RA Regular Arm x DB (pull side mount) 689 PDQ
1 ea. Kickplate 90 10 x 2” LDW B4E 32D Don Jo
1 ea. Electric Strike 55-ABC 24V Fail Secure 32D SDC
1 ea. Power Supply 602RF x UR-1 Control Module ---- SDC
1 ea. Access Control Module & Card Reader by Security Vender
1 ea. Video Entry System with remote release switch, by Security Vender
Note: Access control module, card reader and peripherals & Video Entry System with remote release switch furnished by Security Vender, Coordinated by GC/CM.
Rated doors require fire alarm termination for electric strike.
Hardware Set 3 - Storeroom Lock x Electric Strike [Access Control] + Spring Hinge
1 ea. Butt Hinge BB81 4 ½” x 4 ½” NRP 26D PBB
1 ea. Spring Hinge SP81 4 ½” x 4 ½” NRP 26D PBB
1 ea. Storeroom Lockset GT 115 MIA 26D PDQ
1 ea. LSDA KIL Cylinder 26D LSDA
1 ea. Wall Stop 1407 26D Don Jo
1 ea. Electric Strike 55-ABC 24V Fail Secure 32D SDC
1 ea. Power Supply 602RF x UR-1 Control Module ---- SDC
1 ea. Access Control Module & Card Reader by Security Vender
Note: Access control module, card reader and peripherals furnished by Security Vender, Coordinated by GC/CM.
Hardware Set 4 - Existing Door & Frame; Replace Hardware and add Access Control.
Survey existing opening and verify that existing door, hardware and frame are in working order. Remove existing lock, patch and repair preps.
Prepare and install the following required items to the existing opening:
1 ea. Storeroom Lockset GT 115 MIA 26D PDQ
1 ea. LSDA KIL Cylinder 26D LSDA
1 ea. Electric Strike 55-ABC 24V Fail Secure 32D SDC
1 ea. Power Supply 602RF x UR-1 Control Module ---- SDC
1 ea. Access Control Module & Card Reader by Security Vender
Note: Access control module, card reader and peripherals furnished by Security Vender, Coordinated by
GC/CM. Rated doors require fire alarm termination for electric strike.
Balance of Existing Hardware to Remain.
Hardware Set 5 - Office Lock [Lock / Unlock]
3 ea. Butt Hinge BB81 4 ½” x 4 ½” NRP 26D PBB
1 ea. Office Lockset GT 116 MIA 26D PDQ
1 ea. LSDA KIL Cylinder 26D LSDA
1 ea. Wall Stop 1407 26D Don Jo
Hardware Set 6 - Privacy Set [Lock / Unlock]
3 ea. Butt Hinge BB81 4 ½” x 4 ½” NRP 26D PBB
1 ea. Privacy Set GT 176 BSN 26D PDQ
1 ea. Wall Stop 1407 26D Don Jo
Hardware Set 7 - Existing Door & Frame; Replace Lock.
Survey existing opening and verify that existing door, hardware and frame are in working order. Remove existing lock, patch and repair preps. Prepare and install the following required items to the existing opening:
1 ea. Classroom Lockset GT 148 MIA 26D PDQ
1 ea. LSDA KIL Cylinder 26D LSDA
Note: Balance of Existing Hardware to Remain.
Hardware Set 8 - New Door in Existing Frame; New Hardware. Survey existing opening and verify that existing door, hardware and frame are in working order. Patch and repair preps on frame. Prepare and install the following required items to the existing opening:
3 ea. Butt Hinge BB81 4 ½” x 4 ½” NRP 26D PBB
1 ea. Office Lockset GT 116 MIA 26D PDQ
1 ea. LSDA KIL Cylinder 26D LSDA
1 ea. Wall Stop 1407 26D Don Jo
Hardware Set 9 - New Door in Existing Frame; New Hardware & Access Control. Survey existing opening and verify that existing frame is in working order. Patch and repair preps on frame.Prepare and install the following required items to the existing opening:
3 ea. Butt Hinge BB81 4 ½” x 4 ½” NRP 26D PBB
1 ea. Storeroom Lockset GT 115 MIA 26D PDQ
1 ea. LSDA KIL Cylinder 26D LSDA
1 ea. Closer 7101 BC EDA (push side mount) 689 PDQ
1 ea. Kickplate 90 10 x 2” LDW B4E 32D Don Jo
1 ea. Wall Stop 1407 26D Don Jo
1 ea. Electric Strike 55-ABC 24V Fail Secure 32D SDC
1 ea. Power Supply 602RF x UR-1 Control Module ---- SDC
1 ea. Access Control Module & Card Reader by Security Vender
Note: Access control module, card reader and peripherals furnished by Security Vender, Coordinated by
GC/CM. Rated doors require fire alarm termination for electric strike.
Hardware Set 10 - Existing Door & Frame; Add Panics and add RFID & Timed Access Survey existing opening and verify that existing door, hardware and frame are in working order. Remove existing push / pull, patch and repair preps. Prepare and install the following required items to the existing opening:
1 ea. Rim Panic 6400R CD (03) 613E PDQ
1 ea. Night latch Trim 6G 03 613E PDQ
1 ea. LSDA Rim Cylinder (03) 10B LSDA
1 ea. LSDA Mortise Cylinder (CD) 10B LSDA
1 ea. Electric Strike 9910 24V Fail Secure 630 PDQ
1 ea. Power Supply 602RF x UR-1 Control Module ---- SDC
1 ea. Access Control Module, Timmer & Card Reader by Security Vender
Note: Access Control Module, Timmer & Card Reader and peripherals furnished by Security Vender, Coordinated by GC/CM.
Hardware Set 11 - Rim Panics x Mullion w/ Pull Trim + Electric Strike [Access Control] + Closers
6 ea. Butt Hinge 4B81 4 ½” x 4 ½” NRP 10B PBB
2 ea. Rim Panic 6300R CD (03) (01) 613E PDQ
1 ea. Dummy Trim 6G 01 613E PDQ
1 ea. Night latch Trim 6G 03 613E PDQ
2 ea. LSDA Rim Cylinder (03) (KM) 10B LSDA
2 ea. LSDA Mortise Cylinder (CD) 10B LSDA
1 ea. Keyed Electric Mullion 9300 EM (paint to match surrounding)600 PDQ
2 ea. Closer 7101 BC SCS Stop (push side mount) 695 PDQ
2 ea. Electric Strike 9910 24V Fail Secure 630 PDQ
1 ea. Power Supply 632RF x UR-1 Control Module ---- SDC
1 ea. Access Control Module, Timmer & Card Reader by Security Vender
Note: Access Control Module, Timmer & Card Reader and peripherals furnished by
Security Vender, Coordinated by GC/CM.
Hardware Set 12 - Storeroom Lock x Electric Strike [Access Control & Release] + Closer
1 ea. Butt Hinge BB81 4 ½” x 4 ½” NRP 26D PBB
2 ea. Butt Hinge Stop BB81 x HPSC45 4 ½” x 4 ½” NRP 26D PBB
1 ea. Storeroom Lockset GT 115 MIA 26D PDQ
1 ea. LSDA KIL Cylinder 26D LSDA
1 ea. Closer 7101 BC RA Regular Arm x DB (pull side mount) 689 PDQ
1 ea. Kickplate 90 10 x 2” LDW B4E 32D Don Jo
1 ea. Electric Strike 55-ABC 24V Fail Secure 32D SDC
1 ea. Power Supply 602RF x UR-1 Control Module ---- SDC
1 ea. Remote Release Switch D15-2-3 ---- SDC
1 ea. Access Control Module & Card Reader by Security Vender
Note: Access control module, card reader and peripherals furnished by Security Vender, Coordinated by
GC/CM. Rated doors require fire alarm termination for electric strike.
Hardware Set 13 - Existing Door & Frame; Replace Hardware and add Access Control Release. Survey existing opening and verify that existing door, hardware and frame are in working order. Remove existing lock, patch and repair preps.Prepare and install the following required items to the existing opening:
1 ea. Storeroom Lockset GT 115 MIA 26D PDQ
1 ea. LSDA KIL Cylinder 26D LSDA
1 ea. Electric Strike 55-ABC 24V Fail Secure 32D SDC
1 ea. Power Supply 602RF x UR-1 Control Module ---- SDC
1 ea. Remote Release Switch D15-2-3 ---- SDC
1 ea. Access Control Module & Card Reader by Security Vender
Note: Access control module, card reader and peripherals furnished by Security Vender, Coordinated by
GC/CM. Rated doors require fire alarm termination for electric strike.
Balance of Existing Hardware to Remain.
Hardware Set 14 - Office Lock [Lock / Unlock] + Closer
3 ea. Butt Hinge BB81 4 ½” x 4 ½” NRP 26D PBB
1 ea. Office Lockset GT 116 MIA 26D PDQ
1 ea. LSDA KIL Cylinder 26D LSDA
1 ea. Closer 7101 BC RA Regular Arm (pull side mount) 689 PDQ
1 ea. Kickplate 90 10 x 2” LDW B4E 32D Don Jo
1 ea. Wall Stop 1407 26D Don Jo
A1.1
ARCHITECTURE
CONSTRUCTION MANAGEMENT
DEVELOPMENT
1104 S. MITCHELL ST.
CADILLAC, MICHIGAN 49601
(231) 779-4002
(231) 779-4022 FAX
ARCHITECT OF RECORD:
DRAWN BY:
PROJECT NUMBER:
SHEET NUMBER:
DATE ISSUED:
S. Kleinsorge
K. Taylor
Nov. 20, 2023 Bidding & Construction
Dec. 1, 2023 Addendum #1
Dec. 11, 2023 Addendum #2
23125
P r o p o s f i c c u r t r a n c e s f o r
M c B a r a l
A g r i c u l t u r a l
S c h o o l
E a s t
M a p l e
S t r e e t
M c B a i n
M
I
E l e m e n t a r y
M i d d l g h
S c h o o l
AutoCAD SHX Text BASE BID: PROVIDE A NEW STRIP OF CARPET @ THRESHOLD OF NEW DOOR 121A, CARPET AS SELECTED BY OWNER
AutoCAD SHX Text
EX. LOUNGE
AutoCAD SHX Text
EX. CORR.
AutoCAD SHX Text
EX.
AutoCAD SHX Text
%%UVEST.
AutoCAD SHX Text
AutoCAD SHX Text
EX. RECEPT.
AutoCAD SHX Text
%%UOFFICE
AutoCAD SHX Text
AutoCAD SHX Text 120A
AutoCAD SHX Text 120B
AutoCAD SHX Text 121B
AutoCAD SHX Text 121A
AutoCAD SHX Text 129B
AutoCAD SHX Text 121C
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
%%UEX. CONFERENCE
AutoCAD SHX Text
AutoCAD SHX Text 129A
AutoCAD SHX Text
NORTH
AutoCAD SHX Text
PARTIAL PLAN - ELEMENTARY
AutoCAD SHX Text
SCALE 1/4" = 1'-0"
AutoCAD SHX Text
%%UEX. HALL
AutoCAD SHX Text
AutoCAD SHX Text
%%UEX. STORAGE
AutoCAD SHX Text
AutoCAD SHX Text
%%UEX. OFFICE
AutoCAD SHX Text
AutoCAD SHX Text
%%UEX. CL.
AutoCAD SHX Text
AutoCAD SHX Text
%%UEX. CL.
AutoCAD SHX Text
AutoCAD SHX Text
%%UEX. OFFICE
AutoCAD SHX Text
AutoCAD SHX Text
%%UEX. HEALTH
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
PRINTER
AutoCAD SHX Text PROVIDE SECURITY FILM ON ALL SECURITY FILM ON ALL FILM ON ALL EXISTING DOOR AND SIDELITE GLAZING @ DOOR 121B
AutoCAD SHX Text
TOOTH IN NEW CMU & BRICK AS REQ'D FOR SMOOTH FINISH AT JAMBS OF NEW DOOR OPENING
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text A3.1
AutoCAD SHX Text
AutoCAD SHX Text A3.1
AutoCAD SHX Text BASE BID: ALL EXISTING FLOORING, BASE TRIM, DROP CEILINGS, LIGHTING, & MECH. DIFFUSERS SHALL REMAIN IN MIDDLE SCHOOL & ELEMENTARY OFFICE AREAS. PROTECT DURING DEMOLITION & NEW WORK. ALTERNATE #2: AT MIDDLE SCHOOL & ELEMENTARY OFFICE AREAS, PROVIDE NEW FLOORING, BASE TRIM, DROP CEILINGS, LIGHTING, & MECH. DIFFUSERS IN EX. VESTIBULE, EX. RECEPTION OFFICE, EX. HALL, EX. STORAGE ROOM, EX. OFFICES, EX. CLOSETS, EX. HEALTH & EX. CONFERENCE, SEE ROOM FINISH SCHEDULE, REFLECTED CEILING PLANS, & ME PLANS.
AutoCAD SHX Text
ALT. #2
AutoCAD SHX Text
AutoCAD SHX Text A2.0
AutoCAD SHX Text
SIM.
AutoCAD SHX Text
NEW WORK
AutoCAD SHX Text PROVIDE SECURITY FILM ON ALL SECURITY FILM ON ALL FILM ON ALL DOOR, TRANSOM AND SIDELITE GLAZING. TYP. @ DOORS 120B
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
EX. BOYS
AutoCAD SHX Text
EX. GIRLS
AutoCAD SHX Text
EX. CLASS ROOM
AutoCAD SHX Text
EX. CORR.
AutoCAD SHX Text PROVIDE & INSTALL NEW ICE MAKER WATER SUPPLY KIT. HIDE NEW PIPING IN CABINETS, WALLS AND ABOVE CEILING TILES. SEE PLUMBING PLANS.
AutoCAD SHX Text
EX.
AutoCAD SHX Text
%%UVEST.
AutoCAD SHX Text
AutoCAD SHX Text
EX. RECEPT.
AutoCAD SHX Text
%%UOFFICE
AutoCAD SHX Text
AutoCAD SHX Text 110A
AutoCAD SHX Text 110C
AutoCAD SHX Text 110B
AutoCAD SHX Text 110D
AutoCAD SHX Text 111A
AutoCAD SHX Text 111B
AutoCAD SHX Text 111C
AutoCAD SHX Text 118B
AutoCAD SHX Text
AutoCAD SHX Text
ETR
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
ETR
AutoCAD SHX Text
%%UEX. CONFERENCE
AutoCAD SHX Text
AutoCAD SHX Text PROVIDE SECURITY FILM ON ALL SECURITY FILM ON ALL FILM ON ALL EXISTING DOOR, TRANSOM AND SIDELITE GLAZING. TYP. @ DOORS 110C & D
AutoCAD SHX Text
STUDENT PRINT.
AutoCAD SHX Text
NORTH
AutoCAD SHX Text
PARTIAL PLAN - MIDDLE SCHOOL
AutoCAD SHX Text
SCALE 1/4" = 1'-0"
AutoCAD SHX Text
%%UEX. HALL
AutoCAD SHX Text
AutoCAD SHX Text
%%UEX. STORAGE
AutoCAD SHX Text
AutoCAD SHX Text
%%UEX. OFFICE
AutoCAD SHX Text
AutoCAD SHX Text
%%UEX. CL.
AutoCAD SHX Text
AutoCAD SHX Text
%%UEX. OFFICE
AutoCAD SHX Text
AutoCAD SHX Text
%%UEX. HEALTH
AutoCAD SHX Text
AutoCAD SHX Text 118A
AutoCAD SHX Text
AutoCAD SHX Text BASE BID: PROVIDE A NEW STRIP OF CARPET @ THRESHOLD OF NEW DOOR 101A, CARPET AS SELECTED BY OWNER
AutoCAD SHX Text
PRINTER
AutoCAD SHX Text PROVIDE SECURITY FILM ON ALL SECURITY FILM ON ALL FILM ON ALL EXISTING DOOR AND SIDE LITE GLAZING @ DOOR 111B & BORROW LITE WINDOW
AutoCAD SHX Text
TOOTH IN NEW CMU AS REQ'D FOR SMOOTH FINISH AT JAMBS OF NEW DOOR OPENING
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text A3.1
AutoCAD SHX Text
AutoCAD SHX Text A3.1
AutoCAD SHX Text
AutoCAD SHX Text A2.0
AutoCAD SHX Text
NEW WORK
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
HARDWARE SETS
AutoCAD SHX Text
DOOR LOCATION
AutoCAD SHX Text
TYPE
AutoCAD SHX Text
GLAZING
AutoCAD SHX Text
FRAME
AutoCAD SHX Text
HDWR.
AutoCAD SHX Text
REMARKS
AutoCAD SHX Text
DOOR SCHEDULE
AutoCAD SHX Text
RATING
AutoCAD SHX Text W
AutoCAD SHX Text H
AutoCAD SHX Text
NO.
AutoCAD SHX Text
DOOR FRAME TYPES
AutoCAD SHX Text
EX. VESTIBULE
AutoCAD SHX Text 7'-2"
AutoCAD SHX Text
PR 3'-0"
AutoCAD SHX Text
EX. VESTIBULE
AutoCAD SHX Text 7'-0"
AutoCAD SHX Text
PR 3'-0"
AutoCAD SHX Text
EX. DOOR & FRAME, NEW HARDWARE
AutoCAD SHX Text
EX. TO REMAIN
AutoCAD SHX Text
EX. RECEPT. OFFICE
AutoCAD SHX Text
EX. RECEPT. OFFICE
AutoCAD SHX Text
EX. RECEPT. OFFICE
AutoCAD SHX Text
EX. DOOR & FRAME, NEW HARDWARE
AutoCAD SHX Text 7'-0"
AutoCAD SHX Text 3'-0"
AutoCAD SHX Text 7'-2"
AutoCAD SHX Text 3'-0"
AutoCAD SHX Text
AutoCAD SHX Text 3'-6"
AutoCAD SHX Text 3'-0"
AutoCAD SHX Text
DOOR & FRAME BY MILLWORK SUPPLIER
AutoCAD SHX Text
EX. CONFERENCE
AutoCAD SHX Text 7'-2"
AutoCAD SHX Text 3'-0"
AutoCAD SHX Text
EX. VESTIBULE
AutoCAD SHX Text 7'-2"
AutoCAD SHX Text
EX. VESTIBULE
AutoCAD SHX Text 7'-2"
AutoCAD SHX Text
EX. DOOR & FRAME
AutoCAD SHX Text
EX. DOOR & FRAME
AutoCAD SHX Text
EX. TO REMAIN
AutoCAD SHX Text
EX. RECEPT. OFFICE
AutoCAD SHX Text
EX. RECEPT. OFFICE
AutoCAD SHX Text
EX. RECEPT. OFFICE
AutoCAD SHX Text
EX. DOOR & FRAME, NEW HARDWARE
AutoCAD SHX Text 7'-0"
AutoCAD SHX Text 3'-0"
AutoCAD SHX Text 7'-2"
AutoCAD SHX Text 3'-0"
AutoCAD SHX Text
AutoCAD SHX Text 3'-6"
AutoCAD SHX Text 3'-0"
AutoCAD SHX Text
DOOR & FRAME BY MILLWORK SUPPLIER
AutoCAD SHX Text
EX. TO REMAIN
AutoCAD SHX Text 3'-0"
AutoCAD SHX Text 3'-0"
AutoCAD SHX Text
EX. VESTIBULE
AutoCAD SHX Text 7'-2"
AutoCAD SHX Text
EX. VESTIBULE
AutoCAD SHX Text 7'-2"
AutoCAD SHX Text
EX. DOOR & FRAME, NEW HARDWARE
AutoCAD SHX Text
EX. DOOR & FRAME, NEW HARDWARE
AutoCAD SHX Text 3'-0"
AutoCAD SHX Text 3'-0"
AutoCAD SHX Text A
AutoCAD SHX Text
HM WELDED
AutoCAD SHX Text D
AutoCAD SHX Text E
AutoCAD SHX Text
ALUMINUM
AutoCAD SHX Text |" TEMP. SAFETY GLAZING w/ SECURITY FILM FILM
AutoCAD SHX Text
NEW VESTIBULE
AutoCAD SHX Text
NEW RECEPT. OFFICE
AutoCAD SHX Text
NEW RECEPT. OFFICE
AutoCAD SHX Text
NEW RECEPT. OFFICE
AutoCAD SHX Text 7'-0"
AutoCAD SHX Text 3'-0"
AutoCAD SHX Text
AutoCAD SHX Text 7'-0"
AutoCAD SHX Text 3'-0"
AutoCAD SHX Text
AutoCAD SHX Text 3'-6"
AutoCAD SHX Text 3'-0"
AutoCAD SHX Text
DOOR & FRAME BY MILLWORK SUPPLIER
AutoCAD SHX Text
AutoCAD SHX Text 7'-0"
AutoCAD SHX Text 3'-0"
AutoCAD SHX Text
PRINCIPAL'S OFFICE
AutoCAD SHX Text
COUNSELOR'S OFFICE
AutoCAD SHX Text
NEW B.F. TOILET
AutoCAD SHX Text
DEAD FILE STORAGE
AutoCAD SHX Text
NEW CONFERENCE
AutoCAD SHX Text
NOT USED
AutoCAD SHX Text
NEW RECEPT. OFFICE
AutoCAD SHX Text 3'-0"
AutoCAD SHX Text
EX. DOOR & FRAME, NEW HARDWARE
AutoCAD SHX Text 7'-2"
AutoCAD SHX Text
NEW BREAK ROOM
AutoCAD SHX Text
SOCIAL OFFICE
AutoCAD SHX Text
NOT USED
AutoCAD SHX Text
EX. STORAGE
AutoCAD SHX Text
EX. OFFICE
AutoCAD SHX Text
EX. CLOSET
AutoCAD SHX Text
EX. OFFICE
AutoCAD SHX Text
EX. HEALTH
AutoCAD SHX Text
EX. CONFERENCE
AutoCAD SHX Text
EX. STORAGE
AutoCAD SHX Text
EX. OFFICE
AutoCAD SHX Text
NOT USED
AutoCAD SHX Text
EX. CLOSET
AutoCAD SHX Text
EX. CLOSET
AutoCAD SHX Text
EX. OFFICE
AutoCAD SHX Text
EX. HEALTH
AutoCAD SHX Text 129A
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 121C
AutoCAD SHX Text 121B
AutoCAD SHX Text 121A
AutoCAD SHX Text 120B
AutoCAD SHX Text 120A
AutoCAD SHX Text 118A
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text
AutoCAD SHX Text 111C
AutoCAD SHX Text 111B
AutoCAD SHX Text 111A
AutoCAD SHX Text 110D
AutoCAD SHX Text 110C
AutoCAD SHX Text 110B
AutoCAD SHX Text 110A
AutoCAD SHX Text
AutoCAD SHX…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .