MATERIAL ORDERING DATA.docx
DOCX document 64 KB Posted
- Attached to
- CASTING Federal contract opportunity
- Solicitation number
- SPMYM2-25-Q-0816
About this file
This is a Material Ordering Data sheet specifying requirements for copper-nickel alloy castings under solicitation SPMYM2-25-Q-0816 for DLA Maritime Puget Sound. The document details requirements for ASTM B369/B369M castings, with a quantity of 1 EA to be manufactured according to drawing 120-4326543 Rev. Z pc. 76A in machined condition. The casting must meet Category 3-I soundness requirements per S9074-AR-GIB-010/278, with specific marking requirements including heat number documentation using vibro tool or round bottom low stress stamps per MIL-STD-792.
The associated solicitation is unrestricted and will result in a firm-fixed-price commercial purchase order using FAR Parts 12 and 13 procedures. Quotes are due by 10 AM Pacific Time on February 18, 2025, and must be submitted via email to kim.vo@dla.mil. The delivery location is FOB Destination Bremerton, WA. Vendors must provide completed solicitation documents, CAGE/DUNS numbers, business size status, lead time, manufacturer information, part numbers, and specification sheets. The procurement falls under NAICS code 331529 and will be evaluated using low price technically acceptable criteria.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| 5 CDRLs.pdf | ||
| SOLICITATION SPMYM2-25-Q-0816.pdf | ||
| DRAWING.docx | DOCX document | |
| Additional information.docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
MATERIAL ORDERING DATA
ASTM-B-369
Any specification that is referenced in this Material Order Data sheet is required to be to the latest revision at time of award.
IDN: N4523A 4325-1240
| ICN: 38RNO52404 | KO: S01 | KOI: 001 |
| Paragraph 5 | Ordering Data |
A. ASTM B369/B369M, STANDARD SPECIFICATION FOR COPPER-NICKEL ALLOY CASTINGS, dated 01 JULY 2024.
ASTM B824, STANDARD SPECIFICATION FOR GENERAL REQUIREMENTS FOR COPPER ALLOY CASTINGS, dated 01 APRIL 2017 B. Quantity of castings:1 EA.
C. Copper Alloy UNS number (Table 2):
D. Pattern or drawing number: 120-4326543 Rev. Z pc. 76A Condition (as-cast, machined, and so forth): Machined E. ASME Boiler and Pressure Vessel Code Requirements:
F. When material is purchased for agencies of the U.S. Government, the Supplementary Requirements of this specification may be specified.
G. The following are optional and should be specified in the purchase order when required:
|_| Pressure test or soundness requirements (Specification B 824) |_| Witness inspection (Specification B824) |_| Certification (Specification B824) |_| Foundry test report (Specification B824) |_| Product marking (Specification B824) |_| Weldability test |_| Approval of weld procedure and records of repairs
H. Supplementary Requirements:
|_| S1 – Referenced documents |_| S2 – Soundness |_| S3 – Pressure test |_| S4 – Weld repair |_| S5 – Quality Assurance |_| S6 – Product marking I. Preparation for delivery:
S7.1 – Level of preservation, packaging, and packing if other than commercial:
Level - C S7.2 – In addition to any special marking required by the contract, marking for shipment shall be in accordance with MIL-STD-129.
Additional Data Requirements:
CERTIFICATION: Limited to chemical and mechanical results only.
Provide a report of NDT results per section 12.2.6 of S9074-AR-GIB-010/278, excluding item (d).
S2 - Soundness - Each casting is Category 3-I per S9074-AR-GIB-010/278.
Product Markings - Mark castings per Note 5 of DWG 120-4326543. Upon acceptable pressure test and visual inspection each casting shall have its heat number marked on the raised pad. To record the heat number the casting may be marked by vibro tool, or round bottom low stress stamps, per MIL-STD-792.
See additional Information attachment for testing clarification and requirements.
All unit, intermediate, and shipping containers must be marked in accordance with MIL-STD-129. Refer to DLA Procurement Note C20 for further instructions.
Prepared By: Zachary Koscielniak Code: 260.9 image1.png image2.png
File details come from the government source that posted it. Updated .