Master File - Attachments 1-8.pdf

h4ecnmjo Text Box Attachment 1 - Reference Drawings

DASHIELDS LOCKS AND DAM

PICTURES MIDDLE WALL BUILDING ROOF

Figure M1- Middle Wall Building from River Wall

Figure M2- Middle Wall Building Roof Lip

Attachment 3 - Photos h4ecnmjo Callout Main Roof h4ecnmjo Callout Small Roof

H4TDSTOX

Figure M3- Middle Wall Building rip

Figure M4- Middle Wall Building patches

Figure M5- Middle Wall Building patching

Figure M6- Middle Wall Building drain and ventilator

Figure M7- Middle Wall Building pipe vent and lip

Figure M8- Middle Wall Building layout

Figure M9- Middle Wall Building edge up-close

Figure M10- Middle Wall Building pipe vent

Figure M11- Middle Wall Building pipe vent, antennas, bubble

DASHIELDS LOCKS AND DAM

PICTURES RIVER WALL BUILDING ROOF

Figure R1- River Wall Building from Middle Wall part 1

Figure R2- River Wall Building from Middle Wall part 2

Figure R3- River Wall Building lip around roof from wall

Figure R4- River Wall Building expanse

Figure R5- River Wall Building expanse with lip around roof

Figure R6- River Wall Building close-up of lip

Figure R7- River Wall Building raised wooden area with ventilators

Figure R8- River Wall Building raised wooden area with ventilator, from inside

Figure R9- River Wall Building raised wooden area with second ventilator, from inside

Attachment 3

ACCIDENT PREVENTION PLAN

Dashields Locks and Dam

Replace Middle and River Wall Buildings’ EPDM Sheet Roofs Contract Number Contractor Name

1. SIGNATURE SHEET.

This Accident Prevention Plan was

Prepared By:

Name Title of corporate safety staff person

Approved By:

President

2. BACKGROUND INFORMATION

a. Contractor: Name Address City, State Zip

b. Contract Number W911WN-##-#-####

c. Project Name: Enter Name of Project

d. Project Description: Enter description of work

e. Name of Company’s recent accident history is included as Attachment # to this Accident Prevention Plan. Information included includes EMR, OSHA 200 Forms, and corporate safety trend analyses.

f. The Major definable features of work are: ______________________________. An Activity Hazard Analysis (AHA) will be prepared for each Major Definable Feature of Work. AHAs will be prepared in accordance with the format shown on page 4 of EM 385-1-1 and will be presented and discussed at the Preparatory Phase Inspection for the applicable feature of work.

3. STATEMENT OF SAFETY AND HEALTH POLICY

Enter statement which describes the company‘s commitment to safety.

4. RESPONSIBILITIES AND LINES OF AUTHORITIES

a. Name - Describe responsibility and accountability of personnel responsible for safety at corporate level.

b. Name - Describe responsibility and accountability of personnel responsible for safety at project level.

c. Lines of authority - Describe lines of authority (as related to safety) for this project.

5. SUBCONTRACTORS AND SUPPLIERS.

a. The following subcontractors will be working on this project:

1. List

b. The CQC System Manger (if someone else, identify) will be responsible for controlling and coordinating subcontractors and suppliers.

c. All subcontractors and suppliers performing work on site will be expected to conform to the requirements of this Accident Prevention Plan and to the requirements of EM 385-1-1.

6. TRAINING.

a. Each employee will receive a safety indoctrination consisting of a thorough review of applicable AHA’s.

b. The following is a list of mandatory training and certifications which are applicable to this project:

1. Vehicle Operator

2. Personal Protective Equipment)

3. Other

c. The following identifies requirements for periodic retraining or recertification relating to items a and b above.

1. List

d. The following individuals shall be trained in the contents of the Emergency Response Plan discussed in Section 12 of this Accident Prevention Plan:

1. List

e. Weekly toolbox safety meeting will be conducted at TIME every ENTER DAY OF WEEK.

Each on site worker will be required to attend. Attendance will be documented. Name will be responsible for conducting these meetings.

7. SAFETY AND HEALTH INSPECTIONS.

a. Name will conduct site safety inspections on a daily basis. Any noted deficiencies will be identified on that day’s CQC Report. Deficiencies will be tracked using the table included as Attachment # to this Accident Prevention Plan.

b. The following external inspections/certifications are required for this project:

List or enter “None Required”.

8. SAFETY AND HEALTH EXPECTATIONS, INCENTIVE PROGRAMS, AND

COMPLIANCE

a. Provide a statement or statements describing the company's written safety program goals, objectives, and accident experience goals for this contract.

b. Provide a brief description of the company's safety incentive programs (if any). If none, so state.

c. Provide a discussion of the company’s policies and procedures regarding noncompliance with safety requirements (to include disciplinary actions for violation of safety requirements).

d. Provide written company procedures for holding managers and supervisors accountable for safety.

9. ACCIDENT REPORTING

a. Name will submit Monthly Man-hour Exposure Reports to the Contracting Officer no later than the 5th work day of each month. The report encompasses on-site work including all hourly and salaried employees. The report will include all subcontractors working on this project.

b. Name will complete the report and submit it to the Contracting Officer within five (5) workdays.

c. Name will immediately notify the Contracting Officer and District Safety Officer of any incidents involving a fatality or permanent total disability, accidents in which three or more persons are hospitalized, accidents that result in property damage in excess of $100,000 or any accident regardless of the consequences, if it is suspected that it will result in unfavorable criticism of the Corps of Engineers.

10. MEDICAL SUPPORT

Prior to the start of work by a contractor, arrangements shall be made with medical treatment facilities and emergency response personnel to provide prompt attention to injured employees.

The Government has no responsibility to provide emergency medical treatment.

The Contractor is responsible for notifying applicable agencies of intended activities, where required, prior to commencement of such activities.

An effective means of communication shall be established with 911 access, or other emergency response, and transportation to a medical treatment facility as a means to effectively care for injured workers shall be provided.

Telephone numbers of physicians, hospitals, ambulances, or other emergency contract information and a map delineating the best route to the nearest medical treatment facility shall be conspicuously posted, at a minimum, on the Safety Bulletin Board.

When emergency medical services are not accessible within five (5) minutes of the work location and there are two (2) or more workers at the location, at least two (2) employees on each shift shall be qualified to administer first aid and CPR. First aid and CPR certificates shall be provided to the Contracting Officer for review and provided as part of the applicable AHAs and appendices of the APP.

Communication Employees working alone in remote locations or away from other workers shall be provided an effective means of communication. The selected communication shall be readily available (easily within immediate reach) of the employee, and must be tested prior to the start of work to verify that it effectively operates in the area/environment. An employee check-in/out procedure shall also be developed to ensure employee safety.

11. PERSONAL PROTECTIVE EQUIPMENT.

a. Outline procedures (who, when, how) for conducting hazard assessments and written certifications for use of personal protective equipment.

12. PLANS (PROGRAMS, PROCEDURES) REQUIRED BY THE SAFETY MANUAL (as applicable)

a. Hazard Communication (HAZCOM) Program (01.B.04)

Included as Attachment # to this Accident Prevention Plan is a written hazard communication program addressing as a minimum, the following: training (to include potential safety and health effects from exposure), labeling, current inventory of hazardous chemicals on site, and the location and use of Material Safety Data Sheets (MSDSs).

b. Emergency Response Plans (01.E.01, 01.E.05, 06.A.02, 19.A.04, 09.K.01, and 09.K.02)

An Emergency Response Plan is included as Attachment # to this Accident Prevention Plan. This Emergency Response Plan includes:

An Emergency Response Plan to ensure employee safety in case of fire or other emergency.

Emergency telephone numbers and reporting instructions for ambulance, physician, hospital, fire, and police. Also included is a map of directions to the nearest hospital(s). This list and map shall be conspicuously posted at the work site.

A wildfire prevention plan and a wildfire control plan for work at all facilities and areas with potential exposure to wildfire

c. Respiratory Protection Plan (05.E.01)

Name of Company‘s Respiratory Protection Plan is included as Attachment # to this Accident Prevention Plan.

d. Health Hazard Control Program (06.A.02)

Activity Hazard Analyses (AHA’s) shall consider all substances, agents, and environments that present a hazard and will recommend hazard control measures. Engineering and administrative controls shall be used to control hazards. In cases where engineering or administrative controls are not feasible, PPE may be used. The AHA shall serve as certification that a hazard assessment has been conducted.

e. Plan for Prevention of Alcohol and Drug Abuse (Defense Federal Acquisition Regulation Supplement Subpart 252.223-7004, Drug-Free Work Force)

Name of Company‘s plan for prevention of Alcohol and Drug Abuse is included as Attachment # to the Accident Prevention Plan. This plan meets the minimum requirements of

DFAR 252.223-7004.

13. Detailed site specific hazards and controls will be provided in the activity hazard analysis (AHA) for each phase of the operation (each Major Definable Feature of Work as defined by the Contractor Quality Control Plan). The AHA’s will provide information on how the requirements of major sections of EM 385-1-1 will be met. Particular attention shall be paid to excavations, scaffolding, medical and first aid requirements, sanitation, personal protective equipment, fire prevention, machinery and mechanized equipment, electrical safety, public safety requirements, and chemical, physical agent, and biological occupational exposure prevention requirements.

AHA’s will be prepared utilizing the format shown on page 4 of EM 385-1-1.

Drinking water and toilets PFDs

Attachments Attachment # - Accident History Attachment # - Safety Deficiency Tracking Table Attachment # - Emergency Response Plan Attachment # - Respiratory Protection Plan Attachment # - First Aid and CPR certificates Attachment # - Hazard Communication (HAZCOM) Program Attachment # - Emergency Response Plan Attachment # - Plan for Prevention of Alcohol and Drug Abuse

Attachment 4

ABBREVIATED QUALITY CONTROL PLAN

Contract Number

Dashields Locks and Dam Roof Replacements EPDM MW-RW-Dashields

Contractor Name Contractor Address

1. SIGNATURE SHEET.

This QUALITY CONTROL PLAN was

Prepared By:

Title of Preparer

Approved By:

President/Owner

2. BACKGROUND INFORMATION

a. Contractor : Name Address City, State Zip

b. Contract Number W911WN-##-#-####

c. Project Name: Enter Name of Project

d. Project Description: Enter description of work

3. Organization

a. Name of the (QCSM) Person will perform the duties and responsibilities of the Quality Control System Manager (QCSM) for this contract.

b. It is acknowledged that Name of the (QCSM) Person shall conduct 3-phase inspections for all of the definable features of work.

c. The Name of the (QCSM) Person and the Quality Control staff reports to the project manager or someone higher (President or Owner of the Company) in the organization. List the name of the Individual that CQC reports too.

d. The Project Superintendent is Name the Superintendent. (if specs permit, the Superintendent may be the

QCSM)

4. Personnel and Assignments Name of the (QCSM) Person

a. Name of the (QCSM) Person and name the staff all work for the Name of the Contractor.

b. Provide the qualification of QCSM and any staff in a Resume format.

c. Name of the (QCSM) Person has the authority to stop work which is not in compliance with the contract.

(See copy of letter) In addition to the above experience and/or education requirements the CQC System Manager must have completed the course entitled "Construction Quality Management for Contractors".

This course is periodically offered by the Pittsburgh District and sponsored by the Contractors Association of Western Pennsylvania. Completion of the course offered by other Corps of Engineers Districts will be accepted upon presentation of a valid certificate. Submit a copy of the Certificate.

d. Name of Superintendent

e. The Major definable features of work for this contract List the Major definable features of work for this contract. Also list any test that may be required to be performed for each definable feature of work.

A definable feature of work is a task which is separate and distinct from other tasks, has separate control requirements, and may be identified by different trades or disciplines, or it may be work by the same trade in a different environment. Although each section of the specifications may generally be considered as a definable feature of work, there are frequently more than one definable features under a particular section. This list will be agreed upon during the coordination meeting.

5. 3-Phase Control Inspections

The Contractor Quality Control System Manager (CQC-SM) Name of the (QCSM) Person, will conduct a minimum of three phases of control for each definable feature of work to ensure that the construction, including sub-contractors and suppliers complies with the requirements of the contract. The three phases of control are:

Preparatory Phase Initial Phase Follow Up Phase

Three Phase Control Inspections will be tracked by the CQC-SM on the Three Phase Inspection Checklist included in the Attachments Section of this Plan.

a. Preparatory Phase Inspection

i. After all required plans, documents and materials are approved and before work begins on each definable feature of work, a Preparatory Phase Inspection will be performed. The CQC-SM will conduct a meeting attended by the Contracting Officer, project superintendent, other QC personnel (as applicable), subcontractors, and the foreman responsible for the definable feature. The results of the preparatory phase actions will be documented by separate minutes prepared by the CQC-SM and attached to the Daily QC Report. The superintendent and/or foreman responsible for the work will instruct applicable workers as to the acceptable level of workmanship required in order to meet contract specifications.

ii. The CQC-SM will prepare a Preparatory Inspection Checklist (see sample in Attachments Section of this plan) and submit it for approval to the Contracting Officer before any Preparatory Inspection Meetings. At least 48-hour notice will be provided to the government for all Preparatory Inspection Meetings.

iii. Items covered-at- Preparatory Inspection Meetings will-be-as follows, - -

A review of each paragraph of applicable Specifications.

A review of the Contract Drawings.

A check to insure that all materials and/or equipment have been tested; submitted and approved.

A review of provisions that have been made to provide required control inspection and testing.

An examination of the work area to assure that all required preliminary work has been completed and is in compliance with the contract.

A physical examination of required materials, equipment and sample work to verify that all items are on hand, are properly stored and conform to the approved submittals.

A review of the appropriate Activity Hazard Analysis (AHA) to assure safety requirement is met.

A discussion of procedures for controlling quality of the work including repetitive deficiencies.

Document construction tolerances and workmanship standards.

b. Initial Phase Inspection

i. At the beginning of a definable feature of work, Initial Phase Inspections will be performed by the QC

Personnel assigned to the work. Initial Phase Inspections will be repeated for each new crew to work on site, or any time acceptable specified quality standards are not being met.

ii. The Contracting Officer will be notified by the CQC-SM at least 48 hours in advance of beginning the

Initial Phase Inspection. The CQC-SM will prepare an Initial Inspection Checklist (see sample in Attachments Section of this plan) to document the inspection and attach it to the Daily QC Report. The exact location of the Initial Inspection will be indicated for future reference and comparison with Follow- Up Inspections.

iii. Items covered at Initial Phase Inspections will be as follows.

A check of work to ensure that it is in full compliance with contract requirements. Review minutes of the preparatory meeting.

A verification of the adequacy of controls to ensure full contract compliance. Verify required control inspection and testing.

Establish the level of workmanship and verify that it meets minimum acceptable workmanship standards. Compare with required samples as appropriate.

Resolve all differences.

Check safety to include compliance with and upgrading of the Safety Plan and Activity Hazard

Analysis (AHA). Review the AHA with each worker.

c. Follow-up-Phase Inspection – Daily checks will be performed to assure control activities, including control testing are providing continued compliance with contract requirements until completion of the particular Feature of Work.

Those daily checks shall be documented on the Contractor's Daily Quality Control Report. Control testing reports shall be attached to the Daily Quality Control Report.

Final Follow-Up Inspections will be conducted and all deficiencies corrected prior to the start of additional features of work that may be affected by the deficient work. All deficiencies will be addressed before follow-on work is initiated.

6. Completion Inspections

a. Punch-Out Inspection Near the completion of all work or any increment thereof established in the contract, the Contractor Quality Control System Manager (CQC-SM) will conduct an inspection of the work and develop a punch list of items which do not conform to the approved drawings and specifications. The punch list of deficiencies will be provided to the Project Superintendent for corrections. The CQC-SM will make a second inspection to insure that all deficiencies have been addressed. Once this is accomplished, the CQC-SM will notify the Contracting Officer that the work is ready for the Government

b. Pre-Final Inspection.

The government will perform this inspection to verify that the work is complete. A Government Pre-Final Punch List may be developed as a result of this inspection. The CQC-SM will insure that items on this list have been corrected before notifying the Contracting Officer that the work is ready for Final Inspection.

c. Final Acceptance Inspection The CQC-SM will provide 14 - days notice to the Contracting Officer that the work is ready for Final Inspection. The Contracting Officer will schedule the Final Inspection. The CQCSM, the Project Superintendent and the Contracting Officer will be in attendance.

7. Deficiency Tracking Procedures The CQC-SM will review inspections and tests conducted either by Name of the Contractor or subcontractors-for compliance with the contract-documents. Corrective-actions to repair unsatisfactory items will be monitored and documented using the following procedures. .

a. Discrepancies in Contract Documents The following procedures will be followed as soon as subcontractors, vendors or field personnel discover discrepancies in the contract documents or field layout.

CQC-SM will prepare a Request for Information (RFI) and submit it to the Contracting Officer for review and comment.

All RFl's and government responses will be submitted and tracked electronically in the Construction

b. Deficiencies in Workmanship All Quality Control Representatives will report deficiencies in the work they are inspecting to the CQC-SM immediately for corrective action. The CQC-SM will report to the Contracting Officer immediately upon receiving reports from his field staff.

c. Tracking The QCS/RMS system will be used to track deficiencies. Deficiencies identified by the QC staff will be numerically tracked using QC punch list items. QCS will be used to maintain a current log of all QC punch list items. The Contracting Officer will track deficiencies they have identified using its QA punch list item log. The CQC-SM will regularly update the correction status of QC punch list items.

8. Daily Quality Control Reports A Daily Quality Control Report will be prepared at the end of each shift, detailing activities performed on that particular day. At a minimum, this report will contain the following information.

• Date & Shift

• Description & Location of Work

• Weather (including delay time, if applicable)

• Subcontractors on Site

• Work Performed Today (location & description), listed by Contractor/Subcontractor

• Results of Surveillance (satisfactory work completed or deficiencies with action to be taken)

• Test Required by Plans & Specs with Results of Tests

• Verbal Instructions Received from Government Personnel

• Remarks (conflicts in plans, specifications or instructions)

• Accident Reports.

The CQC-SM will compile reports received from all QC Representatives and prepare the Daily QC Report for submission to the Contracting Officer within 24-hours of the period being recorded. The Daily QC Report will be compiled and submitted on-line within the QCS system and a written a copy.

Place on Company Letter Head

(Date) Reference: Contract Number

Contract Title

Subject: Contractor Quality Control System Manager (CQCSM) Appointment and Responsibilities

Name of the (QCSM) Person

Please be advised that you are appointed as the Contractor Quality Control Systems Manager (CQCSM) for the above referenced project. You are charged with establishing and maintaining an effective quality control system consisting of plans, procedures and organization necessary to produce an end product that complies with the contract requirements. The system shall cover all construction operations, both onsite and offsite, including work by subcontractors, fabricators, suppliers and purchasing agents. Your specific responsibilities are as follows.

Insure that your Contractor Quality Control staff maintains a presence at the site during all progress of the work.

Organize and maintain complete records of all letters, submittals, schedules and all other project documentation at the site.

Certify that all submittals are in compliance with the contract requirements.

Administer the Corps of Engineers' 3-Phase Control System, consisting of Preparatory Inspections, Initial Inspections and Follow-up Inspections for each definable feature of work.

Verify that all materials used in the project conform to the requirements of the contract by insuring that specified or required tests are performed.

Conduct Final Inspections and make sure deficiencies are corrected.

Prepare and submit to the Contracting Officer a Daily Contractor Quality Control Report that documents all required quality control activities and/or tests that have been performed.

As the CQCSM for the project, you have complete authority and responsibility to take any action necessary to ensure contract compliance, including the authority to stop work that is not in compliance with the contract, and shall report directly to me.

Regards, Signed by President/Owner of Company

SK-1.1 - Middle Wall Roof Plan

X

X

SK-1 Dashields Fall Protection Location

H4TSTJPP

Callout Location of Fall Protection Anchorage. 2 feet from the roof edge, 7 feet from northeast corner.

H4TSTJPP

Callout Location of Fall Protection Anchorage. 2 feet from the roof edge, 10 feet from the northwest corner.

H4TSTJPP

Line

H4TSTJPP

Underline

H4TSTJPP

Typewritten Text North

H4TDSTOX

Attachment 5

SK-1.2 - River Wall Roof Plan

X

X

H4TSTJPP

Line

H4TSTJPP

Underline

H4TSTJPP

Typewritten Text North

H4TSTJPP

Callout Location of Fall Protection Anchorage. 2 feet from the roof edge, 19' 6" feet from the nouthwest corner.

H4TSTJPP

Callout Location of Fall Protection Anchroage. 2 feet from the roof edge, 33 feet from the northwest corner.

H4TSTJPP

Polygon

H4TSTJPP

Callout Wooden elevated cover to be replaced.

River Wall Raised Wooden Cover – Overview

SK-2 - River Wall Raised Wooden Cover – Vertical Flashing

The purpose of this detail is to show an example of the current unacceptable details for membrane splicing and flashing. The contractor needs to submit proposed revised details for splicing and sealing as indicated in the Specification.

SK-2 Wooden Elevated Cover

H4TDSTOX

Attachment 6

E N

G F

O R

M

-R

J A

N

E D

IT

IO

N O

F M

A R

IS

O

B S

O

LE

T

P A

G

O F

G E

S (P ro po n en t:

C

E M

P -C

E

P E v 1.

S U

B M

IT

T

A L

R E

G

IS

T

R

(E

1-

C O

N T

R A

C T

N O

S P

E C

IF

IC

A T

IO

N

S E

C T

IO

N

T

IT

LE

A

N D

L O

C A

T

IO

C

N T

R A

C T

O R

A C T I V I T Y N O a.

T R

A N

S

M

IT

T A

L N

O b.

D A T A f.

O & M M A N U A L S o.

R E C O R D S n.

S A M P L E S m

C E R T I F I C A T E S l.

R E P O R T S k.

S T A T E M E N T S j.

S C H E D U L E S i.

I N S T R U C T I O N S h.

D R A W I N G S g.

G O V

M

V

T

D q

I N F O M A T

I

L

Y p.

E

S C

R

IP

T

IO

N

F

IT

M S

U B

M

IT

T c.

S P

E C

IF

IC

A T

IO

N

P A

R A

G R

A P

H N

U M

B E

R d

I T E M N O c.

T Y

P E

O F

S U

B M

IT

T

A L

C L

A S

S I-

F

IC

A T

IO

N

R E V I E W E R r.

C O

N T

R A

C T

O R

S C

H E

D U

L E

D A

T E

S C

O N

T R

A C

T O

R A

C T

IO

N

S U

B M

IT

s.

M A

T E

R

IA

L

N E

E D

E D

B Y u.

D A

T E w

S U

B M

IT

T

O G

O V

E R

N

M E

N T x.

C O D E v.

A P

P R

O V

A L

N E

E D

E D

B Y t.

G O

V E

R N

M E

N T

A C

T

IO

N

R E

M A

R K

S aa

C O D E y.

D A

T E z.

A pp

M et ho d

2.

A pp

In st r

2.

M nf tr C er t

2.

C re de nt ia ls

2.

D em o P la n

2.

Q C P

2.

S ch ed ul e

2.

In st ru ct io ns

2.

In fo

C ar d

2.

W ar ra nt y In fo

2.

F al lP ro te ct io

2.

Attachment 8: PA20200001 (02/07/2020) Wage Determination Schedule