Market Survey_7012190975.docx

CUI

09/15/2025 Market Research Questionnaire

DLA Land and Maritime has a requirement for NSN 4810-014814004 and is considering a fixed-price solicitation and subsequent award. See below for additional details.

REQUIREMENTS:

· Quantity: 22 EA

· Item Description: actuator, hydraulic-

· The approved manufacturer and part number:

· Metrex Valve Corp. (21013) P/N EA2000 ASSY EA2000

· NAICS: 332911 (750 employees)

· Additional Technical Requirements (FAT, PVT, etc.): None

As a potential supplier of this item, we are asking that you complete this market survey to the best of your knowledge so that we can generate a realistic and beneficial solicitation.

Please complete and return the survey by Close of Business 09/22/2025. Thank you for taking the time to complete this survey.

If you have any questions, contact Mandy Phipps-Kuhlman at mandy.phipps-kuhlman@dla.mil (preferred) or 614-692-8675.

Name and Title of Person Completing this Form:

Email Address:

Company Name:

Company Cage Code:

Company Phone:

I. General Questions:

1. Please check your company’s size and status:

a. |_| Manufacturer or |_| Distributor / Dealer / Reseller

b. Do you deal through Dealers / Distributors, or do you prefer to deal with the Government?

|_| Dealer |_| Gov’t

c. |_| Large or |_| Small Business If you are a Small Business, how are you currently classified by the Small Business Administration (SBA)?

NOTE: This information will be used in determining if the solicitation should be set aside. Do NOT check any of the categories UNLESS it applies to your business.

1. 8(a) Program |_|

2. Small Disadvantaged Business (SDB) |_|

3. Woman Owned Small Business (WOSB) |_|

4. Economically disadvantaged women-owned small business (EDWOSB) |_|

5. Veteran Owned Small Business (VOSB) |_|

6. Service-Disabled Veteran Owned Small Business (SDVOSB) |_|

7. HUBZone Small Business |_|

a. HUBZone, Small Disadvantaged, Other Veteran Owned Business |_|

b. HUBZone, Woman Owned, Other Veteran Owned Business |_|

2. Approximately how many employees do you currently have?

3. Do you have a parent company? |_| Yes |_| No

a. Name of your parent company?

b. Approximately how many employees does your parent company have?

4. If you are a dealer for the actual manufacturer of these items, please provide the following information:

a. Manufacturer

b. CAGE code

c. Approximately how many employees does the manufacturer have?

5. If you are an approved source for this NSN, are you the actual manufacturer or are these items made for you (a pass thru item)?

6. Where this the item manufactured?

7. Is your company registered in the “System for Award Management” (SAM)? Yes |_| No |_| If not, are you willing to obtain this registration? Yes |_| No |_|

NOTE: SAM registration is required for all awards and must contain the above NAICS code to be eligible for an award for this item. Offerors are strongly encouraged to complete/update their SAM registrations as soon as possible. Link: https://www.sam.gov or https://www.fsd.gov

8. Did you complete the FAR and DFARS certifications and representations in SAM?

Yes |_| No |_|

II. Price Breaks & Quantity Option Questions:

1. Is the unit price quantity sensitive? Yes |_| No |_|

a. If yes, please indicate the optimal quantity ranges

NOTE: Current requirement is for 22 each. Please cover quantities of 1-25.

Range 1:

Range 2:

Range 3:

Range 4:

Range 5:

Range 6:

2. Can you estimate the unit price for the base quantity of 22? $

3. What components/raw materials are the primary drivers in the pricing of these items (i.e. steel, rubber, oil, plastics, etc.)?

III. Cost or Pricing Data or Other than Cost or Pricing Data:

Solicitations with an estimated maximum value over $2,000,000.00 may require the submission of Certified Cost or Pricing Data (CCPD). Solicitations under this threshold may require other than CCPD. Information on CCPD is in the Federal Acquisition Regulation (FAR) Subpart 15.4 -- Contract Pricing. Questions regarding CCPD can be addressed to the contract specialist, the Defense Contract Audit Agency office or Defense Contract Management Agency office for your area, or the DLA Land & Maritime Business Counseling Center via an email to DSCC.BCC@dla.mil or by calling 1-800-262-3272.

NOTE: The value of the contract is based on the total estimated dollar value, which includes the base quantity and maximum option quantity.

NOTE: Certified Cost or Pricing Data is not required for commercial items. However, it is the contracting officer’s authority to determine if an item is commercial or not.

1. Do you fully understand the CCPD requirements?

|_| Yes |_| No

2. If CCPD is required, will you be able to provide such data:

|_| Yes |_| No

a. Have you provided CCPD to DLA before? |_| Yes |_| No

i. If yes, please provide the most recent contract number or audit number for which your company provided the CCPD: Contract Number , Audit Number

3. If you are a dealer, you will be required to obtain CCPD from the actual manufacturer. Will you be able to provide CCPD from the manufacturer? |_| Yes |_| No

IV. Commercial Questions:

1. Do you consider this item commercial per FAR 2.101(b)? |_| Yes |_| No

2. The Government, and the Government only, must determine if an item is commercial AND if the commercial prices are fair and reasonable. This is usually accomplished through proof that commercial market forces have driven the setting of the commercial price. Such proof would describe the commercial market acceptance of the price or, more plainly, invoices proving that the item has been sold commercially at like prices, for like quantities.

a. Is your company willing and able to provide such proof, if the government determines it is needed to verify price reasonableness: |_| Yes |_| No

b. If yes, are these items published catalogs / price listed? |_| Yes |_| No Please indicate how we can obtain a copy of this published price list:

c. If not, are these items modified items of a type available in the commercial marketplace (Meaning these items do not have to be identical, but are closely related)? |_|Yes |_| No

d. If yes, can you provide:

i. Un-redacted commercial sales history which is the Government’s preferred documentation; |_| Yes |_| No

ii. A complete set of drawings for this item for review so that the Government can do an Independent Government Cost Estimate (IGCE); |_| Yes |_| No

iii. Listing in catalogs or brochures; |_| Yes |_| No

iv. Known established price list to commercial marketplace; |_| Yes |_| No

v. Availability or announcement to the general public; |_| Yes |_| No

NOTE: Your un-redacted invoices and / or your drawings can be marked Proprietary and Confidential as we will only use them for determination for Price reasonableness. They will also be marked Source Selection Information per FAR 2.101 and 3.104 and will only be used for the solicitation which will be the result of this market research and will not be published or made public.

NOTE: Without proof of commerciality the solicitation will not be processed using commercial procedures (FAR Part 12) but will rather be processed using non-commercial procurement procedures (FAR Part 15).

VI. FOB Point and Packing Questions:

1. The solicitation requires FOB Origin IAW the First Destination Transportation Program (FDT), which means your price would include transportation charges to any location in the United States. Is FOB Origin IAW FDT acceptable? |_| Yes |_| No

2. Can you provide MIL-STD-2073-1E with MIL-STD-129 Markings? |_| Yes |_| No

VII. Delivery Questions:

1. What is the estimated standard delivery for this item?

2. What is your production lead time for this item?

3. What is your maximum capacity for this item?

4. Could you ship a partial quantity earlier than the estimated standard delivery? |_| Yes |_| No

a. If yes, what is the quantity and what would the shorter lead-time be?

5. Is there a Maximum monthly Quantity that you could deliver for the item(s)? |_| Yes |_| No

a. If yes, please annotate the maximum monthly quantity:

6. Would a minimum delivery order quantity and/or dollar value apply to this NSN? |_| Yes |_| No

a. If yes, please list the applicable minimum for this item.

VIII. Miscellaneous Questions:

1. Depending on the technical requirements of the item, First Article Testing (FAT) or Production Lot Testing (PLT) may be required. If required, is your company willing to perform the tests or submit units for testing? |_| Yes |_| No

2. Is Inspection and Acceptance at Destination acceptable? |_| Yes |_| No

3. Is Inspection and Acceptance at Origin acceptable? |_| Yes |_| No

4. Does this item contain hazardous material? |_| Yes |_| No

5. Does the item contain precious metals? |_| Yes |_| No If yes, please indicate the specific metals:

6. Do you require Government Furnished Property (GFP) or Government Furnished Material (GFM) to make this item? |_| Yes |_| No

a. If yes, list the GFP and / or GFM required?

7. Is the item listed on a GSA Schedule? |_| Yes |_| No

a. If yes, on which GSA schedule are they listed:

IX. Comments:

1.

CUI

Source Selection Sensitive Information -- FAR 2.101 AND 3.104