Market Research Survey Blue Utility Coverall.docx

Market Survey for Clothing and Textiles Directorate Market Survey for Clothing and Textiles Directorate

DLA Troop Support

700 ROBBINS AVENUE

PHILADELPHIA, PENNSYLVANIA 19111-5092

Source Selection Info See FAR 2.101 and 3.104

Source Selection Info See FAR 2.101 and 3.104

IN REPLY

REFER TO

DLA Troop Support- FQBC (Tiffany Savage 215-737-8650; Email: Tiffany.Savage@dla.mil)

August 26, 2022

SUBJECT: Market Research Survey ITEMS: Coveralls, Utility, Blue (Shipboard) – NSN 8405-01-057-3482(s)

SPECIFICATION: NCTRF CID 55095

QUANTITIES: Minimum: Base and option years: 7,650EA / AOLQ: 38,250EA

The DLA Troop Support is conducting market research on the above items to determine an acquisition strategy that will enhance our support of military customers worldwide as well as to determine what your industry will be capable of providing with respect to the required item(s). For this reason, DLA Troop Support would appreciate your firm sharing your expertise and insight into how these items can be most efficiently procured.

DLA Troop Support anticipates issuing a solicitation for the referenced item(s) under an Indefinite Quantity Contract. The contract may be for a term of one year. Further, it may contain an option to extend the term of the contract. If an option to extend the term of the contract provision is included in the solicitation, each option term would be one year. However, the total contract term will not exceed four years. Your firm’s response to the questionnaire will help the Government determine an appropriate term for the contract based on the current capabilities of the coverall industry.

It should be noted that this inquiry, in no way, should be interpreted as a solicitation for offers. No information provided in response to this inquiry will be considered binding between the vendor and the Government. With these facts in mind, it is requested that you review the item(s) listed above and answer the questions on the attached pages. The answers you provide will remain confidential. Please return this survey to Tiffany Savage by September 2, 2022 at 3:00 PM Eastern Time via email at Tiffany.Savage@dla.mil.

NOTE: This is a MARKET RESEARCH SURVEY, NOT A REQUEST FOR A BID/PROPOSAL. Please review the following pages and provide a current market price.

Thank you for your time and consideration.

1. Commerciality:

(a) Is the item(s) commercial or modified commercial in accordance with Federal Acquisition Regulation (FAR) 2.101? For example: is the item of a type used by the general public; sold or offered for sale to the general public? Is the modification of a type available in the commercial market place?

(b) If the answer to (a) is no, does your firm deal in commercial products that would be comparable to the item(s) required and/or can they be used in lieu of these items? If so, could you provide examples?

(c) Are you aware of a commercial item available in the market place that you could manufacture with minor modification to meet government requirements?

2. Item(s) Required:

(a) Is the item(s) made of any type of material that is a major cost driver? For example, is the item made of {list major materials, ie, leather, nylon, etc.}

(b) Does any part of the item(s) consist of foreign material?

If yes, what material and where is it manufactured.

(c) Does your firm normally stock this item(s)?

(1) If yes, how many are on hand at any given time?

(2) If no, would your firm be willing to stock this item(s)?

(3) If your firm is willing to stock this item(s), would you need a stocking-up period?

If so, how many days would be required to stock-up?

(d) If you are a manufacturer, what is the monthly production rate for these item(s)?

How many item(s) can be produced at a time?

Is the manufacturing process a batch process or a continuous process?

(e) What is the minimum monthly production quantity required to be economically producible?

(f) What is the maximum monthly production quantity without incurring additional costs?

3. Delivery:

(a) Can you deliver item(s) to military customers throughout the US (direct vendor delivery) as well as to stock points (generally Pendergrass, GA; Austin, TX, Lansing, MI)?

(b) Are there any pricing differences based on delivery locations? For example, delivery to an east coast location would cost less than delivery to a west coast location due to bulk nature of the product.

(c) Can you deliver item(s) on a FOB Destination basis?

(d) The production lead time with this item is 120 days. Is this realistic? If not, please provide realistic terms, but no longer than 150 days for initial and 120 days for follow on deliveries. We are currently in production on this item and the lead time is realistic.

The Government anticipates an annual demand quantity of:

Coveralls, Utility, Blue (Shipboard) – NSN 8405-01-057-3482(s) 7,650EA

Can you meet this demand?

(e) Would your firm be able to ship item(s) in two (2) days for an urgent requirement? Please provide additional information, such as quickest delivery possible, extra costs associated with 2-day shipping, etc.

Please provide additional information, such as quickest delivery possible, extra costs associated with two-day shipping, etc. Yes, additional price would depend on shipping destination.

4. Pricing

(a) The Government anticipates an annual demand quantity of:

Coveralls, Utility, Blue (Shipboard) – NSN 8405-01-057-3482(s) – 7,650EA

Can you provide a “ballpark” price?

(b) What is the material/labor ratio (as it is related to costs) for manufacturing this item?

(c) Is pricing on item(s) stable or volatile? If volatile, please state material and evidence of volatility. All raw materials are on long term contract.

(d) If the Government wishes to use an option to extend the term of the contract, a pricing mechanism for the option year(s) needs to be included in any resultant contract.

(1) Would you be able to provide pricing on the item(s) for the base contract year (1 year) and any option year(s)? That is, could you price items out 2 years, 3 years, 4 years or 5 years? If no, please state why. Yes

(2) If the answer to (c) (1) above is no and your firm can only provide pricing for one year, would you be willing to accept an Economic Price Adjustment (EPA), which would allow the Government to adjust the base contract price to achieve a revised contract unit price for an option year(s)? The EPA is based on a formula that is generally tied to the Producer Price Index and is limited to a 10% annual increase.

(e) The Government anticipates a guaranteed minimum quantity of:

Coveralls, Utility, Blue (Shipboard) – NSN 8405-01-057-3482(s) – 7,650EA

Do you have a minimum ordering quantity and/or dollar value that you require for an individual order and if so what would that quantity and/or dollar value be?

(f) The Government anticipates a maximum quantity of:

Coveralls, Utility, Blue (Shipboard) – NSN 8405-01-057-3482(s) – 38,250

Do you have a maximum ordering quantity and/or dollar value that you require for an individual order, and if so what would that quantity and/or dollar value be?

(g) Are there price breaks for this item(s)? If so, what are the quantity break points?

(h) How do you set prices for your customers? Do you have volume discounts or valued customer discounts? How would pricing be set for this item(s)? Prices are set per option terms based on raw material cost variations.

5. Quality/Warranty/Returns:

(a) Do you have any commercial warranties? If not, please explain what your standard warranty plan is for the items that you sell. All items are warranted for a period of 24 months from the original purchase date.

(b) What is your commercial practice for returns (items damaged upon delivery, incorrect orders, etc.)?

Notification to FPI customer service and/or program manager, inquiry, disposition and subsequent resolution/replacement

(c) Do you use/have industry standards for product quality or safety? If yes, please list. BOP & FPI standard operation procedures

(d) Do you inspect products for resale at time of receipt? If yes, who performs the inspections (i.e, individual, department)?

6. Company Description:

(a) Are you a large or small business? (Small business being defined as a firm that employs less than 500 people)

(b) Are you a manufacturer? If so, would you be willing to provide an offer? If not, do you have an authorized dealer/distributor?

(c) If you are a dealer/distributor, would you be willing to provide an offer? If not, do you have an authorized dealer/distributor?

(d) If you are a dealer/distributor, is your supplier a small or large business

(e) Who are your major customers, e.g. retailers, industrial accounts, commercial accounts?

(f) Do you have any long-term contracts (up to 5 years) with your customers and/or suppliers for the same or similar items?

(g) Are you familiar with LTC Procedures: If yes, please describe. If no, please explain why, e.g., pricing too volatile, no interest.

7. First Article Requirements (if applicable):

a. The Government typically requires 30 days for the manufacture and delivery of the first article for this item. Is this an adequate amount of time for this item given the ordering and receipt of components?

b. If not, please provide a more appropriate amount of time and provide the reasons why you need the additional time.

c. The production lead time (PLT) for this item is 120 days. Given the 30-day delivery time and additional 30 days for government testing, would delivery of the initial order be affected or is 120 days a sufficient PLT?

8. Miscellaneous:

(a) Can your company accommodate a Surge Requirement in which your company would be required to satisfy requirements for emergency situations (i.e., ramp up to meet early requirements (surge) and/or requirements that may exceed estimated annual quantities)?

(b) Delivery orders issued under any resultant contract will be communicated to your company by Electronic Data Interchange (EDI). Does your firm have EDI capabilities? If not, do you plan on establishing EDI capabilities in the near future?

(c) Do you have access to and/or are you registered on Defense Logistics Agency’s DLA internet Bid Board System DIBBS (at https:www.dibbs.bsm.dla.mil)?

(d) If item is commercial, any anticipated Request for Proposal (RFP) may only allow 2 weeks between issue date and closing/due date. Can you respond to an RFP in this timeframe?

(e) Is your company registered in the System for Award Management (SAM)? (Registration is mandatory prior to receiving any award from DLA Troop Support)

9. Interest:

a. Would your company be interested in making this item?

b. Place of Performance:

FPI Safford

1529 HWY 366

FCI Safford, AZ 85546 Cage Code: 79452

c. Subcontracting? ___Y ___N

d. Subcontractor(s):

e. Percent Subcontracted:

Source Selection Info See FAR 2.101 and 3.104 image1.png