M6700422Q1025 Amendment 0001.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83)

Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of this amendment is to update the requirement as follow s:

1) CLIN 0002 is updated. These updates are also included in the CLIN 0002 description in the Performance Work Statement (PWS).

2) CLIN 0003 is removed.

All other terms and conditions remain unchanged.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 14

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 30-Aug-2022

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X M6700422Q1025

X 9B. DATED (SEE ITEM 11)

19-Aug-2022

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE

RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

30-Aug-2022

CODE

BLOUNT ISLAND COMMAND

5880 CHANNEL VIEW BLVD.

JACKSONVILLE FL 32226

M67004 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

M6700422Q1025

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 1449 - CONTINUATION SHEET

SUPPLIES OR SERVICES AND PRICES

CLIN 0002

The CLIN extended description has changed from:

The contractor shall provide all labor, materials and parts to accomplish work contained in the attached PWS using standard commercial industry practices and IAW the terms and conditions of this contract.CLIN 0002 - Building 360 Closet to Readera. Run 3 single mode fiber 4 strands from closet to inbound 3 readers.b. Provide lite guides and bulk heads.c. Provide SM converter (SigmaMax 065-11965FPDR) at reader end.d. Terminates all 12 strands on each in with LC connectors.e. Cables and fibers tagged and labeled.

To:

The contractor shall provide all labor, materials and parts to accomplish work contained in the attached PWS using standard commercial industry practices and IAW the terms and conditions of this contract.CLIN 0002 - Building 360 Closet to Readera. Run 4 single mode fiber 4 strands from closet to inbound 3 readers and 1 outbound center reader.b. Provide lite guides and bulk heads.c. Provide SM converter (SigmaMax 065-11965FPDR) at reader end.d.

Terminates all 12 strands on each in with LC connectors.e. Cables and fibers tagged and labeled.

CLIN 0003

The pricing detail quantity has decreased by 1.00 from 1.00 to 0.00.

DELIVERIES AND PERFORMANCE

The following Delivery Schedule item for CLIN 0003 has been changed from:

DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

POP 26-SEP-2022 TO

25-MAR-2023

N/A MCSF BLOUNT ISLAND

CHARLES STICHBERRY

5880 CHANNEL VIEW BLVD.

JACKSONVILLE FL 32226

(904) 696-5641 FOB: Destination

M54026

To:

DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

POP 26-SEP-2022 TO

25-MAR-2023

N/A MCSF BLOUNT ISLAND

CHARLES STICHBERRY

5880 CHANNEL VIEW BLVD.

JACKSONVILLE FL 32226

(904) 696-5641 FOB: Destination

M54026

The following have been modified:

PERFORMANCE WORK STATEMENT

PERFORMANCE WORK STATEMENT (PWS)

Telecommunication Sustainment and Maintenance Services

Blount Island Command

Part 1

General Information

1. GENERAL: This is a non-personal services contract. The Government shall not exercise any supervision or control over the contract service providers performing the services herein. Such contract service providers shall be accountable solely to the Contractor who, in turn is responsible to the

Government. The contractor is responsible for providing all personnel, materials, transportation, supervision, and other resources necessary to provide compliant services as stated herein.

1.1 Description of Services/Introduction: The contractor shall provide all necessary labor and material to properly complete the sustainment and maintenance repair aboard Marine Corps Support Facility, Blount Island (MCSF-BI).

1.2 Background: MCSF-BI does not have the expertise or the manpower to perform this magnitude of telecommunication support services. Work should be concluded no later than six months from date of execution of contract.

1.3 Objectives: Contractor will provide walk through with Government Subject Matter Expert (SME) during the requested sustainment and maintenance repair project and after the project to ensure that all projects have reached the required goals.

1.4 Scope: The contractor’s responsibilities and tasks are as follows:

1.4.1 Coordinate with government Telecommunication Officer and plan and design:

a. Coordinate with Telecommunication Officer on building availability and scheduled areas.

Assists in coordinating with technical teams to ensure required infrastructure is available to support project execution.

b. Coordinate with Telecommunication Officer in collaborating closure activities including knowledge transfer, lessons learned, client satisfaction and release of all resources / infrastructure.

c. Furnish and provide all necessary labor and material to properly ground and bond newly installed equipment.

d. Contractors must be BICSI-Certified and all required regulation.

e. Contractor will abide by MCSF-BI Environmental Regulations and Policies.

f. Coordinate in tracking and providing guidance to Telecommunication Officer Status of start planned schedules (and milestones).

g. Provide weekly progress reports to include:

a. Daily updated on project progress plans.

b. Daily update and status of problems or foresee able problems.

1.4.2 Coordinate with contractor all deliverables for plans through:

CLIN 0001

Bldg. 551 to DBP06

a. One 2in underground conduit pathway via directional bore from HH092 to/enter Bldg

b. Run single mode fiber 6 strands from Bldg to DBP

c. Run cooper 6 pair from Bldg to DBP

d. Provide lite guides and bulk head

e. Terminates all 6 strands on each end with LC connectors.

f. Cables and Fibers tagged and labeled.

CLIN 0002

Bldg. 360 Closet to Reader

a. Run 3 4 single mode fiber 4 strands from closet to inbound 3 readers and 1 outbound center reader.

b. Provide lite guides and bulk heads.

c. Provide SM converter (SigmaMax 065-11965FPDR) at reader end.

d. Terminates all 12 strands on each in with LC connectors.

e. Cables and Fibers tagged and labeled.

CLIN 0003

Bldg. 450 PM Closet to Reader in CLIX

a. Run single mode fiber 6 strands from closet to reader

b. Provide lite guides and bulk heads.

c. Provide SM converter (SigmaMax 065-11965FPDR) at reader end

d. Terminates all 6 strands on each in with LC connectors.

e. Cables and Fibers tagged and labeled.

CLIN 0004

Bldg. 450 PM Closet to Reader in North East Door

a. Run single mode fiber 6 strands from closet to reader

b. Provide lite guides and bulk heads.

c. Provide SM converter (SigmaMax 065-11965FPDR) at reader end

d. Terminates all 6 strands on each in with LC connectors.

e. Cables and Fibers tagged and labeled.

1.5 Period of Performance: The period of performance shall be for a base period from 26 September

2022 – 25 March 2023.

1.6 General Information:

1.6.1 Quality Control. The applicable contract quality requirements are for commercial standards. The contractor shall maintain an effective quality control program to ensure services are performed in accordance with this PWS and commercial industry standards. The contractor shall develop and implement procedures to identify, prevent, and ensure non-recurrence of defective services. The contractor’s quality control program is the means by which he assures himself that his work complies with the requirement of the contract. IAW FAR 46.202-1, the Government shall rely on the contractor’s existing quality assurance systems as a substitute for Government inspection and testing before tendering for acceptance unless customary market practices for the commercial services being acquired include in-process inspection. Any in-process inspection by the Government shall be conducted in a manner consistent with commercial practice. In the event that there are nonconforming services, the Government shall request a copy of the written Quality Control Plan (QCP).

1.6.2 Quality Assurance. The government shall evaluate the contractor’s performance under this contract in accordance with the Quality Assurance Surveillance Plan. This plan is primarily focused on what the

Government must do to ensure that the contractor has performed in accordance with the performance standards. It defines how the performance standards will be applied, the frequency of surveillance, and the minimum acceptable defect rate(s).

1.6.3 Recognized Holidays.

New Year’s Day Labor Day

Martin Luther King Jr.’s Birthday Columbus Day

President’s Day Veteran’s Day

Memorial Day Thanksgiving Day

Juneteenth National Independence Day Christmas Day

Independence Day

1.6.4 Hours of Operation. The contractor is responsible for conducting business, between the hours of

0630 - 1700 Monday thru Friday except Federal holidays or when the Government facility is closed due to local or national emergencies, administrative closings, or similar Government directed facility closings.

For other than firm fixed price contracts, the contractor will not be reimbursed when the government facility is closed for the above reasons. The Contractor must at all times maintain an adequate workforce for the uninterrupted performance of all tasks defined within this PWS when the Government facility is not closed for the above reasons. When hiring personnel, the Contractor shall keep in mind that the stability and continuity of the workforce are essential.

1.6.5 Place of Performance. The work to be performed under this contract will be performed at Blount

Island Command, Jacksonville, FL. Blount Island Command is a United States Marine Corps installation.

1.6.6 Type of Contract. The Government will award a Firm Fixed Price Contract.

1.6.7 Security Requirements. There are no known organizational conflicts of interest. The resultant contractor employees will be required to sign a non-disclosure statement before beginning work as there may be access to classified or sensitive information. A DD 254 is applicable to this contract. The applicable

DD Form 254 is an attachment to the contract and provides the contractor with the security requirements needed to undertake a particular task(s). As applicable, the DD 254 also provides the classification guidance that is necessary to perform on a classified contract.

1.6.7.1 Physical Security. The contractor shall be responsible for safeguarding all government equipment, information and property provided for contractor use. At the close of each work period, government facilities, equipment, and materials shall be secured.

1.6.7.2 Security Procedures. The contractor shall adhere to and participate in the execution of all security instructions, Command Orders, and directives of Blount Island Command.

1.6.7.3 CONUS Anti-Terrorism (AT) Considerations. The contractor shall comply with monthly scheduled

Random Access measures (RAM). These RAM, at a minimum, shall consist of the random implementation of higher Force Protection Conditions (FPCONS) measures in consideration of the local terrorist capabilities. Random use of other physical security measures will be used to supplement FPCON measures.

The contractor shall comply with all requirements associated with FPCON measures.

1.6.7.4 Background Checks for Contractors Performing Services On-Site. The contractor shall perform background checks and make suitability determinations for all employees performing services on-site. The contractor and its subcontractors shall complete background checks and make suitability determinations on all employees before beginning performance on site. The contractor shall notify the Contracting Officer that the background checks and suitability determinations have been completed for all affected individuals.

Contractor personnel shall also be subject to additional background checks by the Government before and during their performance at Blount Island Command. Contractors shall insert terms that conform substantially to the language herein for background checks in all subcontracts under the contract.

1.6.7.4.1 Compliance with the requirements for performing a background check and making a suitability determination shall not be construed as providing the contractor employee clearance to have access to classified information or confidential business information.

1.6.7.4.2 Removal of Contractor Employees. Removal of contractor employees will be made by the

Contracting Officer for any employee whose continued employment under this contract is inconsistent with the interest of military security. The Contracting Officer may require the immediate removal of any contractor employee that is objectionable, incompetent, or endanger persons (including themselves) or property, or whose physical or mental condition is such that it would impair the employee’s ability to satisfactorily perform the work. Notification for removal will be in writing. However, notification may be made by telephone, and later confirmed in writing if time and circumstances warrant. The contractor shall take immediate action to replace any dismissed employee. Personnel changes, regardless of cause, will not reduce the contractor’s obligation to perform work in accordance with the contract terms and conditions.

1.6.7.5 Key Control. As applicable, the Contractor shall establish and implement methods of making sure all keys/key cards issued to the Contractor by the Government are not lost or misplaced and are not used by unauthorized persons. NOTE: All references to keys include key cards. No keys issued to the Contractor by the Government shall be duplicated. The Contractor shall develop procedures covering key control that shall be included in the Quality Control Plan. Such procedures shall include turn-in of any issued keys by personnel who no longer require access to locked areas. The Contractor shall immediately report any occurrences of lost or duplicate keys/key cards to the Contracting Officer.

1.6.7.5.1 In the event keys, other than master keys, are lost or duplicated, the Contractor shall, upon direction of the Contracting Officer, re-key or replace the affected lock or locks; however, the Government, at its option, may replace the affected lock or locks or perform re-keying. When the replacement of locks or re-keying is performed by the Government, the total cost of re-keying or the replacement of the lock or locks shall be deducted from the monthly payment due the Contractor. In the event a master key is lost or duplicated, all locks and keys for that system shall be replaced by the Government and the total cost deducted from the monthly payment due the Contractor.

1.6.7.5.2 The Contractor shall prohibit the use of Government issued keys/key cards by any persons other than the Contractor’s employees. The Contractor shall prohibit the opening of locked areas by Contractor employees to permit entrance of persons other than Contractor employees engaged in the performance of assigned work in those areas, or personnel authorized entrance by the Contracting Officer.

1.6.7.5.3 Lock Combinations. The Contractor shall establish and implement methods of ensuring that all lock combinations are not revealed to unauthorized persons. The Contractor shall ensure that lock combinations are changed when personnel having access to the combinations no longer have a need to know such combinations. These procedures shall be included in the Contractor’s Quality Control Plan.

1.6.8 Special Qualifications. All contractor personnel working on this contract shall have or qualify for a Secret Clearance.

1.6.8.1 Base Access. In order to gain access to the Installation, the contractor shall comply with requirements for documentation and criminal background check per CmdO 5560.1.

1.6.8.2 The contractor shall obtain appropriate Blount Island badges, vehicle passes and vehicle registration/decals prior to entering the facility. The Blount Island Police Department pass & ID Office issues badges, vehicle passes and decals based upon the duration of the contract.

1.6.8.3 Common Access Cards (CACs). The CAC is a DOD-mandated program affecting Military, DOD

Civilians and eligible contractors. In addition to its use as an ID card, the CAC is expected to provide a variety of functional capabilities such as access to buildings and facilities, and secure access to Government computer systems and networks.

1.6.8.4 The contractor shall comply with all security requirements enforced by the applicable sponsoring

Government agency. Contractor personnel shall have as a minimum a favorable National Agency Check with Inquiries completed before being permitted access to Government automated information technology systems.

1.6.9 Post Award Conference/Periodic Progress Meetings. The Contractor agrees to attend any post award conference convened by the contracting activity or contract administration office in accordance with Federal Acquisition Regulation Subpart 42.5. The Contracting Officer, Contracting Officer’s

Representative (COR), and other Government personnel, as appropriate, may meet periodically with the contractor to review the contractor's performance. At these meetings the contracting officer will apprise the contractor of how the government views the contractor's performance and the contractor will apprise the Government of problems, if any, being experienced. Appropriate action shall be taken to resolve outstanding issues. These meetings shall be at no additional cost to the government.

1.6.10 Contracting Officer Representative (COR). The COR monitors all technical aspects of the contract and assists in contract administration The COR is authorized to perform the following functions:

assure that the Contractor performs the technical requirements of the contract: perform inspections necessary in connection with contract performance: maintain written and oral communications with the

Contractor concerning technical aspects of the contract: issue written interpretations of technical requirements, including Government drawings, designs, specifications: monitor Contractor's performance and notifies both the Contracting Officer and Contractor of any deficiencies; coordinate availability of government furnished property, and provide site entry of Contractor personnel. A letter of designation issued to the COR, a copy of which is sent to the Contractor, states the responsibilities and limitations of the COR, especially with regard to changes in cost or price, estimates or changes in delivery dates. The

COR is not authorized to change any of the terms and conditions of the resulting contract.

1.6.11 Key Personnel. The follow personnel are considered key personnel by the government: Contract

Manager. The contractor shall provide a Contract Manager (either on-site or virtually) who shall be responsible for the performance of the work. The name of this person and an alternate who shall act for the contractor when the manager is absent shall be designated in writing to the contracting officer. The contract manager or alternate shall have full authority to act for the contractor on all contract matters relating to daily operation of this contract. The contract manager or alternate shall be available between

8:00 a.m. to 4:30p.m. Monday thru Friday except Federal holidays or when the government facility is closed for administrative reasons.

1.6.12 Identification of Contractor Employees. In accordance with DFARS 211.106, all contract personnel attending meetings, answering Government telephones, and working in other situations where their contractor status is not obvious to third parties are required to identify themselves as such to avoid creating an impression in the minds of members of the public that they are Government officials. They must also ensure that all documents or reports produced by contractors are suitably marked as contractor products or that contractor participation is appropriately disclosed. All contractor personnel working at Blount Island will be required to obtain and wear badges in the performance of this service.

1.6.13 Organizational Conflict of Interest. Contractor and subcontractor personnel performing work under this contract may receive, have access to or participate in the development of proprietary or source selection information (e.g., cost or pricing information, budget information or analyses, specifications or work statements, etc.) or perform evaluation services which may create a current or subsequent Organizationa l

Conflict of Interests (OCI) as defined in FAR Subpart 9.5. The Contractor shall notify the Contracting

Officer immediately whenever it becomes aware that such access or participation may result in any actual or potential OCI and shall promptly submit a plan to the Contracting Officer to avoid or mitigate any such

OCI. The Contractor’s mitigation plan will be determined to be acceptable solely at the discretion of the

Contracting Officer and in the event the Contracting Officer unilaterally determines that any such OCI cannot be satisfactorily avoided or mitigated, the Contracting Officer may affect other remedies as he or she deems necessary, including prohibiting the Contractor from participation in subsequent contracted requirements which may be affected by the OCI.

1.6.14 SAFETY

1.6.14.1 Marine Corps Logistics Command (LOGCOM) is in the process of pursuing OSHA Voluntary

Protection Programs (VPP) recognition, or has already received VPP recognition from OSHA. VPP affects all applicable contractors operating on site. It is the contractor's responsibility to ensure its employees and managers are in full compliance with OSHA requirements and have a general understanding of VPP. All contractors, whether regularly involved in routine site operations or engaged in temporary projects such as construction or repair, must follow the safety and health rules of LOGCOM. Detailed information on VPP is available on the OSHA website at http://www.osha.gov/dcsp/vpp/index.html. The contractor shall comply with commercial safety standards as identified by the Occupational Safety and Health

Administration. The contractor shall comply with all Federal, State, Department of Defense (DoD), Navy, Marine Corps (MC), and local rules and regulations to include but not limited to Occupational Safety and

Health Administration (OSHA) Standards, National Fire Protection Association (NFPA) Standards, Navy

Marine Corps Directive (NAVMC DIR) 5100.8, Marine Corps Order (MCO) 5100.8, and

MARCORLOGCOMO (LCO) 5100.8. The contractor must have a written Safety Plan and submit it to the contracting officer representative (COR) for review and approval by the Contracting Officer within ten (10) calendar days after contract award. In addition to the requirements listed above, the contractor’s written

Safety Plan shall, as a minimum, address the following:

1. Mishap reporting procedures

2. Weekly safety meetings

3. Employee training requirements

4. Monthly safety inspections

5. Requirements for subcontractors to comply with the safety provisions of this contract

1.6.14.2 Additional Safety requirements:

1.6.14.2.1 Applicable Contractors: These requirements apply to contractors, subcontractors, and their employees or agents.

1.6.14.2.2 Days Away, Restricted, and or Transfer Case Incident Rate (DART): Number of recordable injuries and illness cases per 100 full-time employees resulting in days away from work, restricted work activity, and/or job transfer that a site has experienced in a given period.

1.6.14.2.3 Total Case Incidence Rate (TCIR): Total number of recordable injuries and illness cases per 100 full-time employees that a site has experienced in a given period.

1.6.14.2.4 Contractors must submit their 3-yr TCIR and DART rates as part of their proposal in order for the proposal to be considered technically acceptable.

1.6.14.2.5 As soon as reasonably possible but no later than 24 hours of any mishap or incident resulting in personal injury (OSHA recordable) and/or significant property damage while performing work authorized by this contract, the contractor shall notify the following:

1. The activity’s Safety Representative –Jeff Churchill, Jeff.Churchill@.usmc.mil, (904) 696-5623

2. The COR (if applicable); Charles Stichberry, Charles.Stichberry2@usmc.mil, (904) 696 5641

3. The Contracting Officer: Stanley Sanders, Stanley.Sanders@usmc.mil, ( 904) 696-5170

4. A written report of the mishap/incident shall be sent within 24 hours to the designated Safety

Representative, COR, and Contracting Officer stated herein.

http://www.osha.gov/dcsp/vpp/index.html mailto:Jeff.Churchill@.usmc.mil mailto:Charles.Stichberry2@usmc.mil mailto:Stanley.Sanders@usmc.mil

1.6.14.2.6 Mishap notifications shall contain, as a minimum, the following information:

1. Contract Number, Name of Company, and Name and Title of Person(s) Reporting

2. Date, Time, and exact location of accident/incident

3. Brief narrative of accident/incident (Events leading to accident/incident)

4. Cause of accident/incident, if known

5. Estimated cost of accident/incident (material and labor to repair/replace)

6. Nomenclature of equipment and personnel involved in accident/incident

7. Corrective actions (taken or proposed)

8. Other pertinent information

1.6.14.2.7 Contractor must fully cooperate with LOGCOM safety personnel during safety inspections of the workplace and inspections of required documentation.

1.6.14.2.8 Safety requirements listed in this package that do not relate to the contractor’s operations or services may be waived by the Contracting Officer. Objections made by the contractor must be reported to the Contracting Officer within 10 days of contract award. Objections will be considered on a case-by-case basis.

1.6.14.2.9 Smoking and the use of tobacco products is allowed in designated areas only.

1.6.14.2.10 All vehicle operators and passengers of contractor and privately owned vehicles are required to wear seatbelts while their vehicle is in operation on the installation and/or performing work under this contract. The use of seatbelts is also required on all mobile construction equipment operating on the installation and/or performing work under this contract.

1.6.14.2.11 All vehicle operators and passengers are prohibited from using a cell phone, personal digital assistant (PDA), or Blackberry™, unless the vehicle is safely parked or the operator is using a hands-free device. The use of portable headphones, earphones, or other listening devices (except for hand-free cell phones) while operating a motor vehicle is also prohibited.

1.6.14.2.12 Should an accident occur and in the event the US government investigates the mishap, the contractor and subcontractors shall cooperate fully and assist government personnel during the investigation period. Instructions pertaining to the assistance required from the contractor in support of an investigation and the point of contact of the LOGCOM safety personnel involved in an investigation will be provided by the COR or the Contracting Officer.

1.7.

Service Contract Reporting (SCR): Services Contract Reporting (SCR) requirements apply to this contract. The contractor shall report required SCR data fields using the SCR section of the System for

Award Management (SAM) at following web address: https://sam.gov/SAM/.

1.8. MISSION ESSENTIAL CONTRACT REQUIREMENTS.

In the event that the services provided hereunder are determined to be mission essential, the contractor shall comply with DFARS 252.237-7023 and 252.237-7024.

https://sam.gov/SAM/

Part 2

DEFINITIONS & ACRONYMS

2. DEFINITIONS AND ACRONYMS:

2.1. DEFINITIONS:

2.1.1. CONTRACTOR. A supplier or vendor awarded a contract to provide specific supplies or service to the government. The term used in this contract refers to the prime.

2.1.2. CONTRACTING OFFICER. A person with authority to enter into, administer, and or terminate contracts, and make related determinations and findings on behalf of the government. Note: The only individual who can legally bind the government.

2.1.3. CONTRACTING OFFICER'S REPRESENTATIVE (COR). An employee of the U.S. Government appointed by the contracting officer to administer the contract. Such appointment shall be in writing and shall state the scope of authority and limitations. This individual has authority to provide technical direction to the Contractor as long as that direction is within the scope of the contract, does not constitute a change, and has no funding implications. This individual does NOT have authority to change the terms and conditions of the contract.

2.1.4. DEFECTIVE SERVICE. A service output that does not meet the standard of performance associated with the Performance Work Statement.

2.1.5. DELIVERABLE. Anything that can be physically delivered, but may include non-manufactured things such as meeting minutes or reports.

2.1.6. KEY PERSONNEL. Contractor personnel that are required to be used in the performance of a contract by the Key Personnel listed in the PWS.

2.1.7. PHYSICAL SECURITY. Actions that prevent the loss or damage of Government property.

2.1.8. QUALITY ASSURANCE. The government procedures to verify that services being performed by the Contractor are performed according to acceptable standards.

2.1.9. QUALITY ASSURANCE SURVEILLANCE PLAN (QASP). An organized written document specifying the surveillance methodology to be used for surveillance of contractor performance.

2.1.10. QUALITY CONTROL. All necessary measures taken by the Contractor to assure that the quality of an end product or service shall meet contract requirements.

2.1.11. SUBCONTRACTOR. One that enters into a contract with a prime contractor. The Government does not have privity of contract with the subcontractor.

2.1.12. WORK DAY. The number of hours per day the Contractor provides services in accordance with the contract.

2.1.12. WORK WEEK. Monday through Friday, unless specified otherwise.

2.2. ACRONYMS: The following are common acronyms used in contract documents and/or Government meetings:

CFR Code of Federal Regulations CONUS Continental United States (excludes Alaska and Hawaii)

COR Contracting Officer Representative COTR Contracting Officer's Technical Representative COTS Commercial-Off-the-Shelf DD254 Department of Defense Contract Security Requirement List DFARS Defense Federal Acquisition Regulation Supplement DOD Department of Defense

FAR Federal Acquisition Regulation KO Contracting Officer OCI Organizational Conflict of Interest OCONUS Outside Continental United States (includes Alaska and Hawaii) ODC Other Direct Costs POC Point of Contact

PRS Performance Requirements Summary PWS Performance Work Statement QA Quality Assurance QAP Quality Assurance Program QAR Quality Assurance Representative QASP Quality Assurance Surveillance Plan

QC Quality Control QCP Quality Control Program

Part 3

Government Furnished Property, Equipment and Services

3. GOVERNMENT FURNISHED ITEMS AND SERVICES:

3.1 Services: The Government will not provide services to the contractor.

3.2 Facilities: The Government will not provide facilities to the contractor.

3.3 Utilities: All utilities in the facility will be available for the contractor’s use in performance of tasks outlined in this PWS. The contractor shall instruct employees in utilities conservation practices. The contractor shall be responsible for operating under conditions that preclude the waste of utilities, which include turning off the water faucets or valves after using the required amount, proper waste disposable and recycling.

3.4 Equipment: The contractor will have access to lighting and sound.

3.5 Materials: The Government will provide Standard Operating Procedures and Policies and Command Orders

(CMDO).

Part 4

Contractor Furnished Items and Services

4. CONTRACTOR FURNISHED ITEMS AND RESPONSIBILITIES:

4.1 General: The contractor shall furnish all supplies and services required to perform work under this contract that are not listed under Section 1.4 of this PWS.

4.2 Materials: The contractor shall furnish materials and supplies necessary to meet the requirements under this PWS. Refer to Section 1.4 and Part 3 of this PWS.

4.3 Equipment: The contractor shall furnish the equipment necessary to meet the requirements under this PWS.

Refer to Section 1.4 and Part 3 of this PWS.

4.4 Technical Data: This requirement does not include the acquisition of technical data as defined under FAR

2.101.

Part 5

Applicable Publications

5. APPLICABLE PUBLICATIONS

5.1 The contractor must abide by all applicable regulations, publications, manuals, and local policies and procedures.

5220.22-M National Industrial Security Program Operating Manual (NISPOM)

SECNAV M-5510.36 Department of the Navy Information Security Program

SECNAVINST 5510.30C Department of the Navy Personnel Security Program

MCO 5510.18B United States Marine Corps Information and Personnel Security Program

CMDO 5560.1 Entry Control Procedures for MCSF-BI badges and vehicle registration

CMDO 3302.1 Marine Corps Support Facility Blount Island Mission Assurance Plan

EM 385-1-1, U.S. Army Corps of Engineers Safety and Health Requirements Manual

OPNAVINST 5100.23 (series) Navy Occupational Safety and Health Program Manual

MCO 5100.29 (series) Marine Corps Safety Program

MCO 5100.8, Marine Corps Occupational Safety and Health (OSH) Policy

NAVMC DIR 5100.8, MARCOR OSH Program Manual

(End of Summary of Changes)