M6700419R00230002_NWAMS_Amendment.pdf

N0002519RCB0169

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83)

Prescribed by GSA

FAR (48 CFR) 53.243

This amendment 1) changes the proposal submission date back to the original date of 25 September 2019 at 3:00 PM local time, 2) adds the questions and answ ers submitted by vendors, 3) adds Wage Determination 15-5693 Revision 9, 4) Changes Section L-5 Paragraph 10.3.3 to WD 15-5693 Revision 9 dated 08/02/2019, 5) Adds the Performance Requirements Summary to Section E, and 6) changes Section L paragraph 4.2.8.3 Electronic Copies.

1. CONTRACT ID CODE PAGE OF PAGES

J 1 50

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 12-Sep-2019

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X M6700419R0023

X 9B. DATED (SEE ITEM 11)

15-Aug-2019

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer X is extended, is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE

RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

12-Sep-2019

CODE

USMC BLOUNT ISLAND COMMAND

ATTN: STANLEY SANDERS

5880 CHANNEL VIEW BLVD

JACKSONVILLE FL 32226

M67004 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

M6700419R0023

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 30 - BLOCK 14 CONTINUATION PAGE

The following have been added by full text:

ATTACHMENT 2 WAGE DETEMINATION

"REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-5693

Daniel W. Simms Division of | Revision No.: 9

Director Wage Determinations| Date Of Last Revision: 08/02/2019

Note: Under Executive Order (EO) 13658 an hourly minimum wage of $10.60 for calendar year 2019 applies to all contracts subject to the Service Contract

Act for which the contract is awarded (and any solicitation was issued) on or after January 1 2015. If this contract is covered by the EO the contractor must pay all workers in any classification listed on this wage determination at least $10.60 per hour (or the applicable wage rate listed on this wage determination if it is higher) for all hours spent performing on the contract in calendar year 2019. The EO minimum wage rate will be adjusted annually.

Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

States: Guam Northern Marianas Wake Island

Area: Guam Statewide

Northern Marianas Statewide

Wake Island Statewide

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations

01011 - Accounting Clerk I 13.57

01012 - Accounting Clerk II 15.23

01013 - Accounting Clerk III 17.04

01020 - Administrative Assistant 19.48

01035 - Court Reporter 17.40

01041 - Customer Service Representative I 10.89

01042 - Customer Service Representative II 12.25

01043 - Customer Service Representative III 13.37

01051 - Data Entry Operator I 12.15

01052 - Data Entry Operator II 13.25

01060 - Dispatcher Motor Vehicle 14.37

01070 - Document Preparation Clerk 13.85

01090 - Duplicating Machine Operator 13.85

01111 - General Clerk I 10.35

01112 - General Clerk II 11.29

01113 - General Clerk III 12.68

01120 - Housing Referral Assistant 19.39

01141 - Messenger Courier 11.37

01191 - Order Clerk I 12.57

01192 - Order Clerk II 13.71

01261 - Personnel Assistant (Employment) I 15.95

01262 - Personnel Assistant (Employment) II 17.85

01263 - Personnel Assistant (Employment) III 19.89

01270 - Production Control Clerk 21.78

01290 - Rental Clerk 11.10

01300 - Scheduler Maintenance 15.55

01311 - Secretary I 15.55

01312 - Secretary II 17.40

01313 - Secretary III 19.39

01320 - Service Order Dispatcher 12.73

01410 - Supply Technician 19.48

01420 - Survey Worker 15.26

01460 - Switchboard Operator/Receptionist 9.67

01531 - Travel Clerk I 12.77

01532 - Travel Clerk II 13.83

01533 - Travel Clerk III 14.78

01611 - Word Processor I 14.53

01612 - Word Processor II 16.31

01613 - Word Processor III 18.26

05000 - Automotive Service Occupations

05005 - Automobile Body Repairer Fiberglass 13.58

05010 - Automotive Electrician 13.06

05040 - Automotive Glass Installer 12.10

05070 - Automotive Worker 12.10

05110 - Mobile Equipment Servicer 10.27

05130 - Motor Equipment Metal Mechanic 13.71

05160 - Motor Equipment Metal Worker 12.10

05190 - Motor Vehicle Mechanic 13.71

05220 - Motor Vehicle Mechanic Helper 10.12

05250 - Motor Vehicle Upholstery Worker 12.10

05280 - Motor Vehicle Wrecker 12.10

05310 - Painter Automotive 12.87

05340 - Radiator Repair Specialist 12.10

05370 - Tire Repairer 11.44

05400 - Transmission Repair Specialist 13.61

07000 - Food Preparation And Service Occupations

07010 - Baker 10.47

07041 - Cook I 11.45

07042 - Cook II 13.33

07070 - Dishwasher 9.12

07130 - Food Service Worker 9.34

07210 - Meat Cutter 11.86

07260 - Waiter/Waitress 9.19

09000 - Furniture Maintenance And Repair Occupations

09010 - Electrostatic Spray Painter 16.40

09040 - Furniture Handler 9.95

09080 - Furniture Refinisher 16.40

09090 - Furniture Refinisher Helper 12.06

09110 - Furniture Repairer Minor 14.27

09130 - Upholsterer 16.40

11000 - General Services And Support Occupations

11030 - Cleaner Vehicles 9.35

11060 - Elevator Operator 9.29

11090 - Gardener 12.90

11122 - Housekeeping Aide 9.29

11150 - Janitor 9.29

11210 - Laborer Grounds Maintenance 9.74

11240 - Maid or Houseman 9.22

11260 - Pruner 8.72

11270 - Tractor Operator 11.80

11330 - Trail Maintenance Worker 9.74

11360 - Window Cleaner 10.37

12000 - Health Occupations

12010 - Ambulance Driver 17.77

12011 - Breath Alcohol Technician 17.77

12012 - Certified Occupational Therapist Assistant 24.38

12015 - Certified Physical Therapist Assistant 24.38

12020 - Dental Assistant 14.21

12025 - Dental Hygienist 32.84

12030 - EKG Technician 25.10

12035 - Electroneurodiagnostic Technologist 25.10

12040 - Emergency Medical Technician 17.77

12071 - Licensed Practical Nurse I 15.88

12072 - Licensed Practical Nurse II 17.77

12073 - Licensed Practical Nurse III 19.81

12100 - Medical Assistant 12.26

12130 - Medical Laboratory Technician 18.82

12160 - Medical Record Clerk 13.61

12190 - Medical Record Technician 17.77

12195 - Medical Transcriptionist 15.88

12210 - Nuclear Medicine Technologist 39.04

12221 - Nursing Assistant I 11.03

12222 - Nursing Assistant II 12.43

12223 - Nursing Assistant III 13.54

12224 - Nursing Assistant IV 15.22

12235 - Optical Dispenser 17.77

12236 - Optical Technician 15.88

12250 - Pharmacy Technician 15.49

12280 - Phlebotomist 15.22

12305 - Radiologic Technologist 22.69

12311 - Registered Nurse I 22.53

12312 - Registered Nurse II 27.56

12313 - Registered Nurse II Specialist 27.56

12314 - Registered Nurse III 33.34

12315 - Registered Nurse III Anesthetist 33.34

12316 - Registered Nurse IV 39.96

12317 - Scheduler (Drug and Alcohol Testing) 22.01

12320 - Substance Abuse Treatment Counselor 22.01

13000 - Information And Arts Occupations

13011 - Exhibits Specialist I 19.45

13012 - Exhibits Specialist II 24.09

13013 - Exhibits Specialist III 29.47

13041 - Illustrator I 19.45

13042 - Illustrator II 24.09

13043 - Illustrator III 29.47

13047 - Librarian 26.68

13050 - Library Aide/Clerk 15.48

13054 - Library Information Technology Systems 24.09

Administrator

13058 - Library Technician 16.64

13061 - Media Specialist I 17.38

13062 - Media Specialist II 19.45

13063 - Media Specialist III 21.67

13071 - Photographer I 17.38

13072 - Photographer II 19.45

13073 - Photographer III 24.09

13074 - Photographer IV 29.47

13075 - Photographer V 35.65

13090 - Technical Order Library Clerk 18.74

13110 - Video Teleconference Technician 17.38

14000 - Information Technology Occupations

14041 - Computer Operator I 15.71

14042 - Computer Operator II 17.22

14043 - Computer Operator III 19.19

14044 - Computer Operator IV 21.33

14045 - Computer Operator V 23.62

14071 - Computer Programmer I (see 1) 15.73

14072 - Computer Programmer II (see 1) 19.50

14073 - Computer Programmer III (see 1) 23.84

14074 - Computer Programmer IV (see 1)

14101 - Computer Systems Analyst I (see 1) 24.23

14102 - Computer Systems Analyst II (see 1)

14103 - Computer Systems Analyst III (see 1)

14150 - Peripheral Equipment Operator 15.71

14160 - Personal Computer Support Technician 21.33

14170 - System Support Specialist 21.24

15000 - Instructional Occupations

15010 - Aircrew Training Devices Instructor (Non-Rated) 24.23

15020 - Aircrew Training Devices Instructor (Rated) 29.32

15030 - Air Crew Training Devices Instructor (Pilot) 34.91

15050 - Computer Based Training Specialist / Instructor 24.23

15060 - Educational Technologist 27.61

15070 - Flight Instructor (Pilot) 34.91

15080 - Graphic Artist 20.47

15085 - Maintenance Test Pilot Fixed Jet/Prop 34.91

15086 - Maintenance Test Pilot Rotary Wing 34.91

15088 - Non-Maintenance Test/Co-Pilot 34.91

15090 - Technical Instructor 17.65

15095 - Technical Instructor/Course Developer 21.58

15110 - Test Proctor 13.87

15120 - Tutor 13.87

16000 - Laundry Dry-Cleaning Pressing And Related Occupations

16010 - Assembler 9.78

16030 - Counter Attendant 9.78

16040 - Dry Cleaner 11.30

16070 - Finisher Flatwork Machine 9.78

16090 - Presser Hand 9.78

16110 - Presser Machine Drycleaning 9.78

16130 - Presser Machine Shirts 9.78

16160 - Presser Machine Wearing Apparel Laundry 9.78

16190 - Sewing Machine Operator 11.94

16220 - Tailor 12.44

16250 - Washer Machine 10.24

19000 - Machine Tool Operation And Repair Occupations

19010 - Machine-Tool Operator (Tool Room) 16.40

19040 - Tool And Die Maker 20.61

21000 - Materials Handling And Packing Occupations

21020 - Forklift Operator 13.96

21030 - Material Coordinator 21.78

21040 - Material Expediter 21.78

21050 - Material Handling Laborer 11.37

21071 - Order Filler 9.66

21080 - Production Line Worker (Food Processing) 13.96

21110 - Shipping Packer 14.47

21130 - Shipping/Receiving Clerk 14.47

21140 - Store Worker I 14.48

21150 - Stock Clerk 20.34

21210 - Tools And Parts Attendant 13.96

21410 - Warehouse Specialist 13.96

23000 - Mechanics And Maintenance And Repair Occupations

23010 - Aerospace Structural Welder 20.69

23019 - Aircraft Logs and Records Technician 16.09

23021 - Aircraft Mechanic I 19.70

23022 - Aircraft Mechanic II 20.69

23023 - Aircraft Mechanic III 21.74

23040 - Aircraft Mechanic Helper 13.70

23050 - Aircraft Painter 18.50

23060 - Aircraft Servicer 16.09

23070 - Aircraft Survival Flight Equipment Technician 18.50

23080 - Aircraft Worker 17.38

23091 - Aircrew Life Support Equipment (ALSE) Mechanic 17.38

23092 - Aircrew Life Support Equipment (ALSE) Mechanic 19.70

II

23110 - Appliance Mechanic 16.40

23120 - Bicycle Repairer 13.17

23125 - Cable Splicer 19.59

23130 - Carpenter Maintenance 15.10

23140 - Carpet Layer 15.33

23160 - Electrician Maintenance 18.05

23181 - Electronics Technician Maintenance I 15.33

23182 - Electronics Technician Maintenance II 16.40

23183 - Electronics Technician Maintenance III 18.31

23260 - Fabric Worker 14.27

23290 - Fire Alarm System Mechanic 15.43

23310 - Fire Extinguisher Repairer 13.17

23311 - Fuel Distribution System Mechanic 17.46

23312 - Fuel Distribution System Operator 13.17

23370 - General Maintenance Worker 11.96

23380 - Ground Support Equipment Mechanic 19.70

23381 - Ground Support Equipment Servicer 16.09

23382 - Ground Support Equipment Worker 17.38

23391 - Gunsmith I 13.17

23392 - Gunsmith II 15.33

23393 - Gunsmith III 17.46

23410 - Heating Ventilation And Air-Conditioning 17.16

Mechanic

23411 - Heating Ventilation And Air Contidioning 18.25

Mechanic (Research Facility)

23430 - Heavy Equipment Mechanic 17.64

23440 - Heavy Equipment Operator 16.26

23460 - Instrument Mechanic 17.46

23465 - Laboratory/Shelter Mechanic 16.40

23470 - Laborer 11.37

23510 - Locksmith 16.40

23530 - Machinery Maintenance Mechanic 23.13

23550 - Machinist Maintenance 17.46

23580 - Maintenance Trades Helper 10.67

23591 - Metrology Technician I 17.46

23592 - Metrology Technician II 18.56

23593 - Metrology Technician III 19.66

23640 - Millwright 17.46

23710 - Office Appliance Repairer 16.40

23760 - Painter Maintenance 13.95

23790 - Pipefitter Maintenance 17.64

23810 - Plumber Maintenance 16.57

23820 - Pneudraulic Systems Mechanic 17.46

23850 - Rigger 17.46

23870 - Scale Mechanic 15.33

23890 - Sheet-Metal Worker Maintenance 16.09

23910 - Small Engine Mechanic 15.33

23931 - Telecommunications Mechanic I 19.01

23932 - Telecommunications Mechanic II 19.76

23950 - Telephone Lineman 18.24

23960 - Welder Combination Maintenance 17.92

23965 - Well Driller 17.46

23970 - Woodcraft Worker 17.46

23980 - Woodworker 13.17

24000 - Personal Needs Occupations

24550 - Case Manager 14.54

24570 - Child Care Attendant 10.09

24580 - Child Care Center Clerk 12.58

24610 - Chore Aide 10.56

24620 - Family Readiness And Support Services 14.54

Coordinator

24630 - Homemaker 16.12

25000 - Plant And System Operations Occupations

25010 - Boiler Tender 17.46

25040 - Sewage Plant Operator 19.63

25070 - Stationary Engineer 17.46

25190 - Ventilation Equipment Tender 12.06

25210 - Water Treatment Plant Operator 19.63

27000 - Protective Service Occupations

27004 - Alarm Monitor 10.90

27007 - Baggage Inspector 9.40

27008 - Corrections Officer 12.05

27010 - Court Security Officer 12.05

27030 - Detection Dog Handler 10.90

27040 - Detention Officer 12.05

27070 - Firefighter 12.05

27101 - Guard I 9.40

27102 - Guard II 10.90

27131 - Police Officer I 12.05

27132 - Police Officer II 13.40

28000 - Recreation Occupations

28041 - Carnival Equipment Operator 12.79

28042 - Carnival Equipment Repairer 13.97

28043 - Carnival Worker 9.45

28210 - Gate Attendant/Gate Tender 13.18

28310 - Lifeguard 11.01

28350 - Park Attendant (Aide) 14.74

28510 - Recreation Aide/Health Facility Attendant 11.84

28515 - Recreation Specialist 18.26

28630 - Sports Official 11.74

28690 - Swimming Pool Operator 17.71

29000 - Stevedoring/Longshoremen Occupational Services

29010 - Blocker And Bracer 21.47

29020 - Hatch Tender 21.47

29030 - Line Handler 21.47

29041 - Stevedore I 19.98

29042 - Stevedore II 22.96

30000 - Technical Occupations

30010 - Air Traffic Control Specialist Center (HFO) (see 2) 38.78

30011 - Air Traffic Control Specialist Station (HFO) (see 2) 26.74

30012 - Air Traffic Control Specialist Terminal (HFO) (see 2) 29.45

30021 - Archeological Technician I 17.49

30022 - Archeological Technician II 19.56

30023 - Archeological Technician III 24.21

30030 - Cartographic Technician 23.18

30040 - Civil Engineering Technician 23.08

30051 - Cryogenic Technician I 25.57

30052 - Cryogenic Technician II 28.24

30061 - Drafter/CAD Operator I 17.49

30062 - Drafter/CAD Operator II 19.56

30063 - Drafter/CAD Operator III 20.77

30064 - Drafter/CAD Operator IV 25.57

30081 - Engineering Technician I 14.84

30082 - Engineering Technician II 16.66

30083 - Engineering Technician III 18.64

30084 - Engineering Technician IV 23.08

30085 - Engineering Technician V 28.24

30086 - Engineering Technician VI 34.16

30090 - Environmental Technician 23.08

30095 - Evidence Control Specialist 23.08

30210 - Laboratory Technician 20.77

30221 - Latent Fingerprint Technician I 25.57

30222 - Latent Fingerprint Technician II 28.24

30240 - Mathematical Technician 23.34

30361 - Paralegal/Legal Assistant I 19.44

30362 - Paralegal/Legal Assistant II 23.68

30363 - Paralegal/Legal Assistant III 28.99

30364 - Paralegal/Legal Assistant IV 33.88

30375 - Petroleum Supply Specialist 28.24

30390 - Photo-Optics Technician 21.93

30395 - Radiation Control Technician 28.24

30461 - Technical Writer I 23.08

30462 - Technical Writer II 28.24

30463 - Technical Writer III 34.16

30491 - Unexploded Ordnance (UXO) Technician I 24.65

30492 - Unexploded Ordnance (UXO) Technician II 29.82

30493 - Unexploded Ordnance (UXO) Technician III 35.74

30494 - Unexploded (UXO) Safety Escort 24.65

30495 - Unexploded (UXO) Sweep Personnel 24.65

30501 - Weather Forecaster I 25.57

30502 - Weather Forecaster II 31.09

30620 - Weather Observer Combined Upper Air Or (see 2) 20.77

Surface Programs

30621 - Weather Observer Senior (see 2) 23.08

31000 - Transportation/Mobile Equipment Operation Occupations

31010 - Airplane Pilot 29.82

31020 - Bus Aide 8.15

31030 - Bus Driver 9.69

31043 - Driver Courier 9.69

31260 - Parking and Lot Attendant 9.55

31290 - Shuttle Bus Driver 10.59

31310 - Taxi Driver 9.43

31361 - Truckdriver Light 10.59

31362 - Truckdriver Medium 11.61

31363 - Truckdriver Heavy 13.92

31364 - Truckdriver Tractor-Trailer 13.92

99000 - Miscellaneous Occupations

99020 - Cabin Safety Specialist 14.54

99030 - Cashier 9.33

99050 - Desk Clerk 9.70

99095 - Embalmer 24.65

99130 - Flight Follower 24.65

99251 - Laboratory Animal Caretaker I 22.25

99252 - Laboratory Animal Caretaker II 24.31

99260 - Marketing Analyst 21.54

99310 - Mortician 24.65

99410 - Pest Controller 14.61

99510 - Photofinishing Worker 12.95

99710 - Recycling Laborer 14.32

99711 - Recycling Specialist 21.66

99730 - Refuse Collector 13.63

99810 - Sales Clerk 9.66

99820 - School Crossing Guard 16.44

99830 - Survey Party Chief 22.02

99831 - Surveying Aide 12.52

99832 - Surveying Technician 16.27

99840 - Vending Machine Attendant 22.25

99841 - Vending Machine Repairer 28.30

99842 - Vending Machine Repairer Helper 22.25

Note: Executive Order (EO) 13706 Establishing Paid Sick Leave for Federal

Contractors applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1

2017. If this contract is covered by the EO the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness injury or other health-related needs including preventive care; to assist a family member (or person who is like family to the employee) who is ill injured or has other health-related needs including preventive care; or for reasons resulting from or to assist a family member (or person who is like family to the employee) who is the victim of domestic violence sexual assault or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $4.54 per hour up to 40 hours per week or $181.60 per week or

$786.93 per month

HEALTH & WELFARE EO 13706: $4.22 per hour up to 40 hours per week or $168.80 per week or $731.47 per month*

*This rate is to be used only when compensating employees for performance on an SCA-covered contract also covered by EO 13706 Establishing Paid Sick Leave for Federal

Contractors. A contractor may not receive credit toward its SCA obligations for any paid sick leave provided pursuant to EO 13706.

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor; and 4 weeks after 3 years. Length of service includes the whole span of continuous service with the present contractor or successor wherever employed and with the predecessor contractors in the performance of similar work at the same

Federal facility. (Reg. 29 CFR 4.173)

HOLIDAYS: A minimum of ten paid holidays per year: New Year's Day Martin Luther

King Jr.'s Birthday Washington's Birthday Memorial Day Independence Day

Labor Day Columbus Day Veterans' Day Thanksgiving Day and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:

1) COMPUTER EMPLOYEES: Under the SCA at section 8(b) this wage determination does not apply to any employee who individually qualifies as a bona fide executive administrative or professional employee as defined in 29 C.F.R. Part 541. Because most Computer System Analysts and Computer Programmers who are compensated at a rate not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals (29 C.F.R. 541.

400) wage rates may not be listed on this wage determination for all occupations within those job families. In addition because this wage determination may not list a wage rate for some or all occupations within those job families if the survey data indicates that the prevailing wage rate for the occupation equals or exceeds

$27.63 per hour conformances may be necessary for certain nonexempt employees. For example if an individual employee is nonexempt but nevertheless performs duties within the scope of one of the Computer Systems Analyst or Computer Programmer occupations for which this wage determination does not specify an SCA wage rate then the wage rate for that employee must be conformed in accordance with the conformance procedures described in the conformance note included on this wage determination.

Additionally because job titles vary widely and change quickly in the computer industry job titles are not determinative of the application of the computer professional exemption. Therefore the exemption applies only to computer employees who satisfy the compensation requirements and whose primary duty consists of:

(1) The application of systems analysis techniques and procedures including consulting with users to determine hardware software or system functional specifications;

(2) The design development documentation analysis creation testing or modification of computer systems or programs including prototypes based on and related to user or system design specifications;

(3) The design documentation testing creation or modification of computer programs related to machine operating systems; or

(4) A combination of the aforementioned duties the performance of which requires the same level of skills. (29 C.F.R. 541.400).

2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If you work at night as part of a regular tour of duty you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am.

If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime

(i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work).

** HAZARDOUS PAY DIFFERENTIAL **

An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordnance explosives and incendiary materials. This includes work such as screening blending dying mixing and pressing of sensitive ordnance explosives and pyrotechnic compositions such as lead azide black powder and photoflash powder.

All dry-house activities involving propellants or explosives. Demilitarization modification renovation demolition and maintenance operations on sensitive ordnance explosives and incendiary materials. All operations involving re-grading and cleaning of artillery ranges.

A 4 percent differential is applicable to employees employed in a position that represents a low degree of hazard when working with or in close proximity to ordnance (or employees possibly adjacent to) explosives and incendiary materials which involves potential injury such as laceration of hands face or arms of the employee engaged in the operation irritation of the skin minor burns and the like;

minimal damage to immediate or adjacent work area or equipment being used. All operations involving unloading storage and hauling of ordnance explosive and incendiary ordnance material other than small arms ammunition. These differentials are only applicable to work that has been specifically designated by the agency for ordnance explosives and incendiary material differential pay.

** UNIFORM ALLOWANCE **

If employees are required to wear uniforms in the performance of this contract

(either by the terms of the Government contract by the employer by the state or local law etc.) the cost of furnishing such uniforms and maintaining (by laundering or dry cleaning) such uniforms is an expense that may not be borne by an employee where such cost reduces the hourly rate below that required by the wage determination. The Department of Labor will accept payment in accordance with the following standards as compliance:

The contractor or subcontractor is required to furnish all employees with an adequate number of uniforms without cost or to reimburse employees for the actual cost of the uniforms. In addition where uniform cleaning and maintenance is made the responsibility of the employee all contractors and subcontractors subject to this wage determination shall (in the absence of a bona fide collective bargaining agreement providing for a different amount or the furnishing of contrary affirmative proof as to the actual cost) reimburse all employees for such cleaning and maintenance at a rate of $3.35 per week (or $.67 cents per day). However in those instances where the uniforms furnished are made of ""wash and wear"" materials may be routinely washed and dried with other personal garments and do not require any special treatment such as dry cleaning daily washing or commercial laundering in order to meet the cleanliness or appearance standards set by the terms of the Government contract by the contractor by law or by the nature of the work there is no requirement that employees be reimbursed for uniform maintenance costs.

** SERVICE CONTRACT ACT DIRECTORY OF OCCUPATIONS **

The duties of employees under job titles listed are those described in the

""Service Contract Act Directory of Occupations"" Fifth Edition (Revision 1) dated September 2015 unless otherwise indicated.

** REQUEST FOR AUTHORIZATION OF ADDITIONAL CLASSIFICATION AND WAGE RATE Standard

Form 1444 (SF-1444) **

Conformance Process:

The contracting officer shall require that any class of service employee which is not listed herein and which is to be employed under the contract (i.e. the work to be performed is not performed by any classification listed in the wage determination) be classified by the contractor so as to provide a reasonable relationship (i.e. appropriate level of skill comparison) between such unlisted classifications and the classifications listed in the wage determination (See 29 CFR

4.6(b)(2)(i)). Such conforming procedures shall be initiated by the contractor prior to the performance of contract work by such unlisted class(es) of employees

(See 29 CFR 4.6(b)(2)(ii)). The Wage and Hour Division shall make a final determination of conformed classification wage rate and/or fringe benefits which shall be paid to all employees performing in the classification from the first day of work on which contract work is performed by them in the classification. Failure to pay such unlisted employees the compensation agreed upon by the interested parties and/or fully determined by the Wage and Hour Division retroactive to the date such class of employees commenced contract work shall be a violation of the Act and this contract. (See 29 CFR 4.6(b)(2)(v)). When multiple wage determinations are included in a contract a separate SF-1444 should be prepared for each wage determination to which a class(es) is to be conformed.

The process for preparing a conformance request is as follows:

1) When preparing the bid the contractor identifies the need for a conformed occupation(s) and computes a proposed rate(s).

2) After contract award the contractor prepares a written report listing in order the proposed classification title(s) a Federal grade equivalency (FGE) for each proposed classification(s) job description(s) and rationale for proposed wage rate(s) including information regarding the agreement or disagreement of the authorized representative of the employees involved or where there is no authorized representative the employees themselves. This report should be submitted to the contracting officer no later than 30 days after such unlisted class(es) of employees performs any contract work.

3) The contracting officer reviews the proposed action and promptly submits a report of the action together with the agency's recommendations and pertinent information including the position of the contractor and the employees to the U.S.

Department of Labor Wage and Hour Division for review (See 29 CFR 4.6(b)(2)(ii)).

4) Within 30 days of receipt the Wage and Hour Division approves modifies or disapproves the action via transmittal to the agency contracting officer or notifies the contracting officer that additional time will be required to process the request.

5) The contracting officer transmits the Wage and Hour Division's decision to the contractor.

6) Each affected employee shall be furnished by the contractor with a written copy of such determination or it shall be posted as a part of the wage determination (See

29 CFR 4.6(b)(2)(iii)).

Information required by the Regulations must be submitted on SF-1444 or bond paper.

When preparing a conformance request the ""Service Contract Act Directory of

Occupations"" should be used to compare job definitions to ensure that duties requested are not performed by a classification already listed in the wage determination. Remember it is not the job title but the required tasks that determine whether a class is included in an established wage determination.

Conformances may not be used to artificially split combine or subdivide classifications listed in the wage determination (See 29 CFR 4.152(c)(1))."

SECTION E - INSPECTION AND ACCEPTANCE

The following have been added by full text:

PERFORMANCE REQUIRMENTS SUMMAR

SOW

Paragraph

Requirement/Task

Description

Standard

(Quality, Timeliness, Cost

Effectiveness)

Acceptable

Quality Level

(AQL)

Sureveillance

Method

Incentives/Disincentives for not meeting the

Performance Standards?

C.6.A Navy Staffing Staffing afloat

IAW C.6.A.2 and

C.6.A.3

100% accomplishment with vacancies resolved IAW the respective C.6 tasks.

Visual inspection of personnel roster and individual training credentials for positions being filled

Non-compliance shall be documented via Letter of

Non Conformance (LNC), refer to Section 6.A.10.

Performance may be documented in CPARS

C.6.B Planning and

Estimating

Assessments performed IAW

6.B.1; Reports submitted IAW

6.B.1.a-d; Repair log maintained

IAW 6.B.2

100% accomplishment of all SOW

Requirements.

Deviations will be considered with reasonable justification via

Reconsideration

Letter.

100% monitoring of worked planned, Periodic spot check of work performed, schedules, and repair logs

Non-compliance shall be documented via Letter of

Non Conformance (LNC), refer to Section 6.A.10.

Performance may be documented in CPARS

C.6.C Navy Supply

Support

Maintenance of

Navy

Materiel/Supplies

IAW 6.C.1-11

100% accomplishment and accuracy with identified errors corrected IAW the respective C.6 tasks.

Random monitoring and spots checks of shipboard inventories, and shortage reports

Non-compliance shall be documented via Letter of

Non Conformance (LNC), refer to Section 6.A.10.

Performance may be documented in CPARS

C.6.E Navy Maintenance and Supply

Adminstration

Navy Maintenance and Supply

Administration performed via

Naval Tactical

Command Support

System (NTCSS)

Organizational

Maintenance

Management

Systems-Next

Generation

(OMMS-NG) and

Relational Supply

(Rsupply) modules

IAW C.6.E

100% accomplishment and accuracy with identified errors corrected IAW the respective C.6 tasks.

Monitoring of

OMMS-NG and

R-Supply modules, Analysis of

SOW required reports

Non-compliance shall be documented via Letter of

Non Conformance (LNC), refer to Section 6.A.10.

Performance may be documented in CPARS

C.6.G Navy Preventive

Maintenance

Master schedule development and submission IAW

6.G.1; Preventive maintenance performed IAW

6.G.1-2;

100% accomplishment of all SOW

Requirements.

Deviations will be considered with reasonable justification via

Reconsideration

Letter.

100% monitoring of worked planned, Periodic spot check of work performed, schedules, CFRs, Notice of

Completion

(NOC)

Non-compliance shall be documented via Letter of

Non Conformance (LNC), refer to Section 6.A.10.

Performance may be documented in CPARS

C.6.G Navy Corrective

Mainteance

Corrective maintenance performed IAW

6.G.3. Management of sub contract work performed

IAW C.6.G.16 and

Repair Log submitted weekly

IAW C.6.G.6

100% accomplishment of all SOW requirements related to

Corrective

Maintenance.

Deviations will be considered with reasonable justification via

Reconsideration

Letter.

100% monitoring of worked planned, Periodic spot check of work performed, schedules, CFRs, Notice of

Completion

(NOC)

Non-compliance shall be documented via Letter of

Non Conformance (LNC), refer to Section 6.A.10.

Performance may be documented in CPARS

The following have been modified:

INSPECTION/MONITORING OF PERFO

E-1 INSPECTION/MONITORING OF PERFORMANCE

(a) Inspection and monitoring of services performed under this contract will be conducted to verify accomplishment of work in compliance with the Statement of Work and all applicable publications, adherence to established contractor processes, to determine timeliness of actions taken, and to ascertain quality of the efforts. The goal of contract performance and the inspections is to attain 100% of required supplies and equipment, maintain them at 100% fully mission capable status and to ensure 100% data accuracy is achieved at the levels described in the SOW. Technical standards for maintenance preservation and inspection will be those contained in the SOW and equipment technical manuals.

(b) In addition to inspection and monitoring by the Government, inspection and monitoring of services shall be performed by the contractor in accordance with his approved quality control plan. Documentation associated with

Contractor Quality Control shall be available to Government Quality Assurance (QA) personnel upon request. The contractor shall document all Contractor inspection and monitoring of services as identified in the approved quality control plan.

(c) Inspection and monitoring of services under this contract may be accomplished by any of the following

Government personnel:

(1) The Contracting Officer and/or assigned Contracting Officer's Representative (COR).

(2) Quality Assurance Representatives (QAR) personnel responsible for the inspection and monitoring of equipment, supplies, or processes.

(3) Personnel who inspect equipment as an adjunct to their primary task of employment (OPFOR).

(4) Blount Island Command Navy TAAT charged with the responsibility for the mission accomplishment

(d) Government personnel will inspect and monitor through:

(1) Examination and employment of equipment and supplies,

(2) Reviewing records of maintenance actions taken,

(3) Reviewing written reports from the contractor

(4) Reviewing the maintenance, supply or other Government approved records, and

(5) Monitoring established contractor processes.

(e) The extent of Government Verification inspection will be determined by the Government. Such inspections will normally not exceed the definitive quality assurance requirements established in the SOW, specifications, and/or contract; however, the Government reserves the right to perform any amount of inspection

(including 100% inspection), when it determines such inspection is warranted.

(f) At the option of the Government, Government inspection may be performed concurrently with the contractor, or independently on samples selected by the Government representative. When independent

Government inspection is performed, the contractor shall ensure that adequate test equipment is available to perform the inspection.

(g) Inspection or monitoring by the Government may be accomplished at any time convenient to the

Government.

(h) All contractor generated quality records shall be available for review by Government personnel at all times.

(i) Discrepancies noted by any of the above personnel will be brought to the attention of the contractor. All official notification of discrepancies shall be in writing from either the Contracting Officer, COR, or personnel duly assigned by the Contracting Officer. Any official notice of unsatisfactory performance shall be in writing from the

Contracting Officer.

(j) In addition to the foregoing inspections, inspection of the methods of performing the services under this contract may be performed by the Master or Officers of a prepositioning ship to assure conformance with applicable maritime laws, rules, and regulations relating to the performance of such activities on board ships and to ensure the general safety and sea-worthiness of the ship. Any shipboard NAVMC activity or condition found by the Master of a ship to be in violation of, or not in consonance with, any of the foregoing may be brought to the attention of the

COR by the Master of the vessel or one of her Officers on his behalf. If the activity or condition is not discontinued or corrected as directed by the Master within such time period and in such manner as shall be acceptable to the

Master, the Master may issue a written notice to the COR with a copy to the contractor; such notice may be the basis of removal from the vessel as expeditiously as possible of the employee(s) responsible for the failure to comply with the Master's instructions.

(k) Differences in interpretation of technical issues or the inspection reports will be brought to the attention of the COR for resolution. Issues not resolved at this level will be forwarded to the Contracting Officer for final determination.

E-2 ACCEPTANCE

Place of acceptance is Blount Island, Jacksonville, Florida unless other is designated on the individual task order.

No written acceptance document is required. Certification of invoices for payment shall be considered acceptance of services and supplies delivered unless a formal notice of unsatisfactory performance has been issued in accordance with paragraph E-l, (d)(1) and (5) above.

SECTION J - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS

ATTACHMENTS

J-1 LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS:

ATCH #1 Technical Library

ATCH #2 Department of Labor, Wage Determination WD-15-5693 Rev 9

ATCH #3 Collective Bargaining Agreement (CBA) United Steel Workers

ATCH #4 Past Performance Package

ATCH #5 DD Form 254, Department of Defense Contract Security Classification

ATCH #6 SOW Attachments/Samples

ATCH #7 Historical Data

ATCH #8 Non-Disclosure Agreement

ATCH #9 Government Furnished Property (GFP) List

ATCH #10 Seniority List

ATCH #11 CDRLs

ATCH #12 Question Format

SECTION L - INSTRUCTIONS, CONDITIONS AND NOTICES TO BIDDERS

INSTRUCTIONS TO OFFERORS

SECTION L INSTRUCTIONS, CONDITIONS AND NOTICES TO OFFERORS

I. SOLICITATION PROVISIONS INCORPORATED BY REFERENCE

52.204-7 SYSTEM FOR AWARD MANAGEMENT OCT 2016

52.204-16 COMMERCIAL AND GOVERNMENT ENTITY CODE REPORTING JUL 2016

52.204-18 COMMERCIAL AND GOVERNMENT ENTITY CODE MAINTENANCE JUL 2016

52.215-1 INSTRUCTIONS OF OFFERORS—COMPETITIVE ACQUISITION JAN 2017

52.215-16 FACILITIES CAPITAL COST OF MONEY JUN 2003

52.215-22 LIMITATIONS ON PASS-THROUGH CHARGES-IDENTIFICATION OF OCT 2009

SUBCONTRACT EFFORT

52.222-24 PREAWARD ON-SITE EQUAL OPPORTUNITY COMPLIANCE FEB 1999

EVALUATION

52.222-46 EVALUATION OF COMPENSATION FOR PROFESSIONAL EMPLOYEES FEB 1993

52.237-10 IDENTIFICATION OF UNCOMPENSATED OVERTIME OCT 1997

252.204-7004 ALTERNATE A, SYSTEM FOR AWARD MANAGEMENT FEB 2014

252.216-7002 ALTERNATE A, TIME-AND-MATERIALS/LABOR-HOUR PROPOSAL FEB 2007

REQUIREMENTS-NON-COMMERCIAL ITEM ACQUISITION WITH

ADEQUATE PRICE COMPETITION

252.227-7017 IDENTIFICATION AND ASSERTION OF USE, RELEASE, OR JUN 1995

DISCLOSURE RESTRICTIONS

II. SOLICITATION PROVISIONS INCORPORATED BY FULL TEXT

52.216-1 TYPE OF CONTRACT (APR 1984)

The Government contemplates award of a Firm Fixed Price Indefinite Delivery Indefinite Quantity contract with Cost

Reimbursable CLINS for Travel, Contractor Acquired Property (CAP) and Exercises Surge Support for resulting from this solicitation.

(End of provision)

52.233-2 SERVICE OF PROTEST (SEPT 2006)

(a) Protests, as defined in section 33.101 of the Federal Acquisition Regulation, that are filed directly with an agency, and copies of any protests that are filed with the Government Accountability Office (GAO), shall be served on the

Contracting Officer (addressed as follows) by obtaining written and dated acknowledgment of receipt from

United States Marine Corps

Blount Island Command

Attn: Patricia E. Solberg

5880 Channel View Blvd.

Jacksonville, FL 32226-3404

(b) The copy of any protest shall be received in the office designated above within one day of filing a protest with the GAO.

52.252-1 SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998)

This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es):

https://farsite.hill.af.mil

L-1 PREPROPOSAL INFORMATION

Offerors must submit a request to obtain an electronic copy of the Contract Reference Library. A completed Non-

Disclosure Agreement must be executed prior to issuance of the Contract Reference Library. Only one Contract

Reference Library is permitted per Offeror; offerors are responsible for forwarding Non-Disclosure Agreements for joint venture entities and/or subcontractors prior to disseminating the Contract Reference Library. Requests must be submitted via e-mail to stanley.sanders@usmc.mil. Offerors must ensure that Contract Reference Library information is requested in a timely manner to permit adequate proposal development. The Government intends to deliver Contract

Reference Library media to offerors by FEDEX overnight delivery, return receipt required. Please note information provided as “For Official Use Only”.

A preproposal conference and site visit will be held at the Blount Island Command, Jacksonville, Florida on 21 Aug

2019 at 1:00 PM EDT. Contractors are to assemble outside Building 104 at least 15 minutes prior to the start of the site-visit, where a Government representative will be available to escort participants to the appropriate location(s).

All vendors are required to submit:

(1) Contractors planning to attend the site visit must submit their request to attend the site visit, including names of company and individual’s attending, even if base access is not required. This is in order to ensure there are reasonable accommodations for all during the site visit.

(2) Contractors planning to attend the site visit must submit requests for access as follows:

(i) Access to Blount Island, Jacksonville FL: For security purposes, contractors wishing to visit the

BICmd facility are required to provide a letter requesting access. The letter should be on official company/activity letterhead and must be signed by an official of the requesting organization (other than the visitor). BICmd visit requests must include the following information:

• Name of Visitor (Last, First, MI)

• Date and Place of Birth

• Proof of Citizenship (requests from non-U.S. citizens must be accompanied by legible copies (front and back) of work card showing expiration date.

• BICmd point of contact and telephone number (Stanley Sanders, 904-696-4812)

• Date and duration of visit (21 August 2019, One (1) day)

• Company telephone

• RFP number M67004-19-R-0023

(3) Visit request must be submitted via e-mail to stanley.sanders@usmc.mil by 12:00 PM EDT on 20 August

2019.

(4) Although a security clearance is not required for the site visit, all contractor representatives must be U.S.

citizens and will be required to furnish a valid driver’s license or other generally acceptable form of picture identification for issuance of a visitors pass allowing for entrance into the facility. All vehicles entering the installation must have a valid registration and insurance documentation or current rental agreement.

Substitution of personnel is not allowed.

(5) Additional information regarding access to BICmd is available by phone at 904-636-3806/3809. Failure to submit the proper visit request information may result in denial of access to the facility. Additional site visits will not be scheduled as a result of such failure.

The Marine Corps Support Facility Blount Island main gate is located off Heckscher Drive to the immediate left just after crossing the causeway that accesses Blount Island. MCSF-BI occupies the eastern half of Blount Island and is collocated with the Jacksonville Port Authority (JaxPort) who owns the western half of the Island. Visitors without proper vehicle identification are required to check-in at the visitor’s center adjacent to the main gate. Once through the Main Gate, proceed to Building 104. Directions from the main gate to Building 104 are available upon request at the visitor’s center. Participants should allow at least one hour for check-in at the main gate and travel to the Blount

Island location. Site Visit will begin in Building 104 promptly at 1:00 PM EDT. Participants arriving late will NOT be included in the Site Visit.

The purpose of the site visit is to allow contractors the opportunity to receive a presentation/overview regarding Navy

Watercraft Afloat Maintenance Services (NWAMS) as well as inspection of ship living accommodations and review of available watercraft ; the preproposal conference WILL NOT provide a tour of a watercraft laden ship nor will the offerors have an opportunity to review actual watercraft (ship check) requiring afloat maintenance.

The site visit is not intended to be and will NOT be an open forum for questions. Contractors must submit questions concerning, or request clarification via e-mail to stanley.sanders@usmc.mil no later than 8:00 AM on 22 August 2019.

Offerors shall make every effort to mitigate proposal assumptions by requesting clarification(s) from the Government prior to 22 August 2019. Comments and questions must reference Request for Proposal M67004-19-R-0023.

Failure of a contractor to submit questions regarding this requirement or to attend the Site Visit will be construed to mean that the contractor fully understands all requirements of the statement of work and Request for Proposal. In no event will failure of a contractor to submit questions or inspect the site constitute grounds for a claim after contract award.

L-2 TECHNICAL LIBRARY

Use of Technical Library.

None of the regulations, manuals, technical orders, or other publications referenced in the Request for Proposal (RFP) will be issued with the solicitation. All documents referenced in the SOW, not otherwise available to the public, will be provided upon request.

If the offerors desire access to the library, please contact via e-mail to Stanley Sanders(Stanley.Sanders@usmc.mil).

Please direct any questions regarding the Technical Library to the aforementioned personnel.

L-3 NOTICE OF ORGANIZATIONAL CONFLICT OF INTEREST (OCI) AVOIDANCE FAR 9.5

The offeror’s attention is directed to Section H, Paragraph H-16 relating to OCI.

L-4 PRE-AWARD SURVEY OF PROSPECTIVE CONTRACTOR

If your response to this solicitation is favorably considered, a survey team may contact your organization to determine your ability to perform. Current financial statements and other pertinent data should be available for Government review at that time, if not already on file with the office having cognizance over your facility. Examples of the areas that may be investigated and evaluated are listed below:

1. Technical Capability 8. Transportation

2. Production…