M6700122Q10570002.pdf

M95430231288

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

Amendment issued to answ er vendor questions and make the highlighted corrections to the parts list. See summary of changes for details.

POC: Stephanie Larabee stephanie.larabee@usmc.mil 910-451-7845

1. CONTRACT ID CODE PAGE OF PAGES

J 1 8

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 27-Jul-2022

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street , County, State and Zip Code) X M6700122Q1057

X 9B. DATED (SEE ITEM 11)

07-Jul-2022

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

27-Jul-2022

CODE

M67001MARINE CORPS FIELD CONTRACTING SYS

STEPHAINE LARABEE

PO BOX 8368

CAMP LEJEUNE NC 28542

M67001 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

M6700122Q1057

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

SUMMARY OF CHANGES

SECTION SF 30 - BLOCK 14 CONTINUATION PAGE

The following have been added by full text:

QUESTIONS AND ANSWERS

RFQ M6700122Q1057

Questions and Answers

Question 1

Answer 1

On the list of equipment below the following part number and quantity are listed on two separate lines:

Part Number Extron 60-883-12 Qty: 3 Description: Audio Amplifier Is the requirement for a total of 3 of these amps or 6 of these amps?

A total of 3.

Question 2

Answer 2

On the list of equipment below the following part number doesn’t match the requirements:

Part number: Chief XTM1U-G Qty: 1 Description: x-large tilting TV wall mount.

Requirement states it must be fully articulating. Is there a requirement for this mount to be articulating?

The mount only needs tilt adjustable to allow for the best viewing; it does not need to have full articulation.

Question 3

Answer 3

On the list of equipment below the following part number is listed 2 times with different descriptions:

a. Part number: Chief XTM1U-G Qty: 1 Description: X-Large tilting TV wall mount

b. Part number: Chief XTM1U-G Qty: 2 Description: Projector Ceiling Mounts Description for item a. above is correct. Does the customer have a preferred part number to the Projector Ceiling Mounts in item b. above?

The 2 mounts will support the installed projectors.

Question 4

Answer 4

In the Conference room, can the power receptacle at 18” Above Fixed Floor (AFF) be used to power the large TV being installed or would you like a receptacle box mounted higher on the wall for the TV?

The power receptacle already installed can be used.

Question 5

Answer 5

Are there power receptacles near the A/V wall boxes to extend power to the podiums?

Yes

Question 6

Answer 6

Are there NIPR network connections already installed in the big A/V wall boxes for extending NIPR network to podium?

There is no requirement for vendors to address NIPR network connectivity.

Question 7

Answer 7

Are the AV CAT6 cables that go between the big A/V wall boxes and the wall boxes in the TV locations shielded CAT6 to pass video codecs?

Yes, they are shielded CAT6 cables with compression ends.

Question 8

Answer 8

What are the A/V sources?

A Government furnished laptop.

Question 9

Answer 9

Do you want the source to display multiple views on screens?

No, same view on all screens.

Question 10

Answer 10

In regards to the 4-hour response time, are we expected to make repairs during that time?

No, but you must troubleshoot and determine what is wrong with the A/V system.

Question 11

Answer 11

What are your expectations that we may not get replacement parts quickly?

It is understood that there is lead time.

Question 12

Answer 12

Can we manually repair the A/V equipment and make it functional until repair parts are received?

Yes

Question 13

Answer 13

Where will the A/V system be controlled?

At the podium.

QTY PART NUMBER ITEM DESCRIPTION

2 PT-MZ780WU7

PROJECTORS

Panasonic PT-MZ780WU7 LCD Projector “Brand Name or Equal”

- Support large venue space utilizing laser light source and LCD -technology

- Minimum 20,000 hours of maintenance-free operation

- Minimum lumens 7,000, 1920 x 1200 resolution

- Minimum 16:10 (WUXGA) aspect ration, lens shift

- Must be powered and controlled by the installed touch panel and remote in the event of touch panel failure

3 MM-V2

LECTERN/PODIUM

Spectrum Media Manager V2 Lectern “Brand Name or Equal”

- Durable, scratch resistant lectern to accommodate required A/V and computer components with front and rear access locking doors

- Minimum dimensions of 45”Wx30”Dx38.5”H (to the work surface

- Minimum work surface large enough to accommodate the computer monitor, A/V equipment touch controller, document camera, podium microphone and leave enough room for the instructor for administration use.

- Table top access ports to allow for USB, VGA, DVI, HDMI and audio connections into the system i.e. additional laptop use on the system.

3 V12H757020

LECTERN/PODIUM DOCUMENT CAMERA

Epson DC-13 Document Camera “Brand Name or Equal”

- Minimum resolution SXGA/XGA/WXGA/HD/1080P resolution

- Minimum ability to rotate 90 degrees vertically and horizontally

- Minimum digital zoom capability of 16X

3 TS-1070-B-S

LECTERN/PODIUM A/V CONTROL TOUCH PANEL

“Brand Name or Equal”

- Minimum 10 inch wide screen

- Minimum 1280 x 800 WXGA resolution

- Touch screen

- Built in speakers and microphone

- Able to operate all projectors, projector screens, TV’s, audio speakers, microphones, and document camera as a whole system and individually.

- Capability to turn volume up or down

- Capability to mute speakers and microphones independently

- Must be mounted to podium

33 60-1881-03

PENDANT LOW PROFILE / 2-WAY FULL RANGE SPEAKERS Extron 60-1881-03

- Primary audio source to provide rich, theater type audio throughout the classrooms.

- Minimum frequency range 70 Hz to 20 kHz

- Minimum 92° conical dispersion – 1 kHz to 4 kHz

- Minimum 65 watts continuous pink noise and 130 watts continuous program

3 60-883-12

AUDIO AMPLIFIER

Extron 60-883-12 “Brand Name or Equal”

- Minimum 400 watts rms output power

- Minimum 200 watts per channel

- Minimum voltage gain 81x (38 dB)

- Minimum audio output and signal type: 2 unbalanced/balanced

- Minimum impedance: > 10k ohms unbalanced/balanced

- Input Nominal level: +4 dBu (1.23 Vrms), balanced

- Audio output number and signal type: 2 channels, 100 V

- Minimum Load impedance: 50 ohms

- Amplifier type: D

- Power output: 200 watts rms per channel, 100 V, 1 kHz, 0.1% THD

- Frequency response: 20 Hz to 20 kHz, ±1 dB

- Damping factor: >100 @ 50 ohms

- High pass filter: 80 Hz, 12 dB per octave roll off for 100 V line output

(switch selectable)

1 MX418-S/C

LECTERN/PODIUM MICROPHONE

SHURE MX418-S/C

“Brand Name or Equal”

- Must provide professional audio from a comfortable distance without personnel having to position microphone within close proximity of their face.

- Minimum 18 inch gooseneck

- Must have mute switch

2 SLXD124/85-G58

INSTRUCTOR WIRELESS MICROPHONE SYSTEM

SHURE SLXD124/85-G58

“Brand Name or Equal”

- The desired requirement for the wireless microphone system is to have a system in which give the instructor full range of the classroom while utilizing the microphone.

- The system shall include a wireless handheld microphone and a quality omnidirectional lavalier microphone.

- Minimum receiver RF Range: 470-952 MHz

- Minimum receiver working range: 300’

- Minimum body pack gain adjustment: 40 dB

- Minimum body pack power output 30mW maximum

- Minimum handheld microphone grain adjustment range 25dB

Minimum handheld microphone power output 30mW maximum

- (Wireless System with SLXD2/58 Handheld Transmitter, SLXD1 Body pack Transmitter and WL185 lavalier microphone)

2 DM-DA4-4K-C

1:4 4K HDMI to DM 8G+ & HDBaseT Splitter Crestron DM-DA4-4K-C “Brand Name or Equal”

- Unless otherwise specified, all measurements are performed with a 20 Hz to 22 kHz BW limit (no weighting).

- Minimum frequency response: 20Hz – 22kHz @ +4dBu, +/- 0.5dBu

- Minimum dynamic range: 20Hz – 20kHz @ 0dB, >105dB

- Equivalent Input Noise: 20kHz BW, max gain, Rs = 150Ω, -126dBu

- Crosstalk: Channel to Channel, stimulus at 20dBu to receptor at -56dBu, 1kHz, < -98dB

3 60-883-12

AUDIO AMPLIFIER

Extron 60-883-12 “Brand Name or Equal”

- Minimum 400 watts rms output power; 200 watts per channel

- Minimum voltage gain: 81x (38 dB)

- Audio input number and signal type: 2 balanced/unbalanced

- Impedance: >10k ohms unbalanced/balanced, DC coupled

- Input Nominal level: +4 dBu (1.23 Vrms), balanced

- Audio output number and signal type: 2 channels, 100 V

- Load impedance: 50 ohms minimum

- Amplifier type: D. Power output: 200 watts rms per channel, 100 V, 1 kHz, 0.1% THD

- Frequency response: 20 Hz to 20 kHz, ±1 Db

- Damping factor: >100 @ 50 ohms

- High pass filter: 80 Hz, 12 dB per octave roll off for 100 V line output

(switch selectable).

1 60-850-01

AUDIO AMPLIFIER

Extron 60-850-01 “Brand Name or Equal”

- Inputs: Balanced or unbalanced stereo or mono on a 3.5 mm, 5-pole captive screw connector

- Speaker Outputs: Screw-lock, 5 mm, 2-pole captive screw connector 200 watts rms output power

- ENERGY STAR qualified amplifier and energy efficient product that conserves energy and reduces costs

- Professional grade signal-to-noise and THD+N performance with 100 dB signal-to-noise ratio and THD+N of less than 0.1%

- Voltage gain: 81x (38 dB). Stereo channel separation: >75 dB @ 1 kHz

- Input Impedance >10k ohms unbalanced/balanced, DC coupled. Input nominal level +4 dBu (1.23 Vrms), balanced

- Output frequency response 20 Hz to 20 kHz, ±1 dB

3 DMPS3-4K-350-C

CONTROL SYSTEM

Crestron DMPS3-4K-350-C “Brand Name or Equal”

- Rack-mountable, high-performance control processor which will provides a complete 4K AV presentation control and signal routing solution for the classrooms

- Integrates the control system, matrix switcher, video scaler, streaming decoder, mic mixer, audio DSP, amplifier, and Digital Media distribution center all into a single 3-space rackmount package

- Must provide substantial signal routing flexibility and high-performance signal processing without the need for separate components

DM-RMC-4KZ-100-

C

Digital Media HDR Receiver & Room Controller Crestron DM-RMC-4KZ-100-C

- Controller and interface for an HD or 4K display device as part of a complete Digital Media System

- Supports 4K60 4:4:4 and HDR video signals

- Connects to switcher or transmitter via a single CATx cable

- Includes IR, RS-232, and Ethernet control ports

3 CEN-SW-POE=5

5 PORT PoE SWITCH Crestron CEN-SW-POE-5 “Brand Name or Equal”

- 5-port unmanaged Gigabit Ethernet switch that provides Power over Ethernet (PoE) from four of its ports

- Gigabit capable to ensure maximum bandwidth for multimedia and critical control data

2 PW-5430DUS

High-Efficiency Power Pack Crestron PW-5430DUS “Brand Name or Equal”

- Power pack for providing PoDM and PoDM+ to DMB-4K-I-C and DMB-4K-0-C blades and to DMPS3-4K-350-C and DMPS3-4K-250-C presentation systems

6 65UT347H0UB

65” 4K DISPLAY

LG 65UT347H0UB

“Brand Name or Equal”

- Type LED-backlit LCD TV designed for Commercial Use

- LED backlight, Direct-lit LED, Nano Cell Display

- Video Interface: Component, Composite, HDMI (X3)

- Minimum resolution: 3840 x 2160

- Minimum display format 4K UHD (2160p), HDR Capable, HDR

Format: HLG10, HDR technology: HDR 10 Pro, Hybrid Log-Gamma

(HLG)

- Image aspect ratio 16:9, Brightness 400 candela per square meter

- Minimum backlight life: 30,000 hour(s), picture enhancements

4K upscaling

6 SUA761PU

Articulating TV Wall Mount Peerless AV SUA761PU

- Must fully articulate and support installed 65” display

86UT640S0UA

86” 4K DISPLAY

LG 86UT640S0UA

“Brand Name or Equal”

- Type LED-backlit LCD TV designed for Commercial Use

- LED backlight, Direct-lit LED, Nano Cell Display

- Video Interface: Component, Composite, HDMI (X4), USB (X2)

- Minimum resolution: 3840 x 2160

- Minimum display format 4K UHD (2160p), HDR Capable, HDR

Format: HLG10, HDR Technology: HDR 10 Pro, Hybrid Log-Gamma

(HLG)

- Image Aspect Ratio 16:9, Brightness 350 candela per square meter, Backlight Life: 30,000 hour(s), Picture Enhancements 4K Upscaling

1 XTM1U-G

X-LARGE TILTING TV WALL MOUNT

CHIEF XTM1U-G

- Must fully articulate and support installed 86” display

- Must be tilt adjustable and support installed 86” display

XTM1U-G

RPAU

PROJECTOR CEILING MOUNTS

CHIEF RPAU

- Must be fully adjustable and support installed projectors

1 21918V

CLASSROOM PROJECTOR SCREEN

DA-LITE 21918V

“Brand Name or Equal”

- Fixed frame screen minimum 10 foot x 16 foot for maximum viewing

- Must be compatable with projector

(End of Summary of Changes)