Lumber Catalog Nov 2024.pdf

LUMBER & OTHER RELATED

WOOD PRODUCTS

MOST USED WOOD PRODUCTS SPECIFICATIONS

SPEC SPEC AMENDMENTS/

NUMBER SPECIFICATION TITLE DATE DATE OF REVISION

ANSI O5.1 American National Std for Wood Poles 23 Jan 92 Active

- Specifications and Dimensions

MM-T-371E Ties, Railroad, Wood, Cross and Switch 31 Jul 75 Cancelled // Suggested A.R.EA. Chapter 3

ASTM D 25 Standard Specification for Round 22 Feb 91 Active Timber Piles

A-A-55057A Panels, Wood/Wood Based; 30 Dec 94 Active Construction and Decorative

A-A-1975A Dowels, Wood 3 Apr 86 Active

(AWPA)

Book of Standards Wood Preservation: Treating Practices 22 Aug 97

A-A-2202 Stakes, Wood 07 Jun 90 02 Oct 97 / A

ASTM D6199 Quality of Wood Members for 5 Dec 95 29-Jul-1998 Containers and Pallets

MM-L-736D Lumber: Hardwood 9 Mar 73 29 Jul 2021

MM-L-751H Lumber: Softwood 13 Aug 70 28 Apr 1997 Replaced by PS-20

MIL-L-2037E Lumber, Oak, White and Red, for Ship 21 Aug 90 20-Oct-2020 / NOT 1 and Boat Construction

MIL-L-2594D Lumber, Ship and Boat Construction; 14 Mar 88 20-Oct-2020 Cedar, Mahogany, and Douglas Fir

A-A-60057 Hardwood, Floorboards and Platforms: 27 Nov 23 For Military Vehicles

M1L-P-6070B Plywood and Veneer, Aircraft, Flat Panel 24 Feb 86 24-JAN-2018 MIL-DTL-6070C

MIL-C-12436C Crossarms, Wood 8 Apr 71 20 May 95 Replaced by A-A-58207

MIL-L-14362G Lumber: Unitizing and Loading of 15 Dec 92 09-May-2022 MIL-DTL-14362 H

MIL-L-19140E(2) Lumber and Plywood, Fire Retardant 24 Dec 20 29-Jan-1997 / AMN 2 Treated (QPL)

M1L-C-28628A Camel, Wood, Marine: Single Log 8 Jul 91 23-Aug-2024 / MIL-DTL-28628 Configuration (Untreated & Treated)

ORDER FROM:

Defense Printing Service Detachment Office Building 4D (Customer Service) 700 Robbins Ave.

Philadelphia, PA 19111-5094

PHONE: (215) 697-2179/2667

FAX: (215) 697-2978

Or Use DD Form 1425

CROSSARMS

FSC 5510

General Description: The crossarms listed herein shall be in accordance with ANSI 05.3 (Letter O) and will prove satisfactory for most power, telephone, and telegraph distribution requirements. Since crossarms are not in direct contact with the soil, the retention of preservative need not be as high as poles.

The acceptable preservatives are:

a. Creosote in accordance with Std P l/P13 of the American Wood Preservers Association.

b. Pentachlorophenol (Penta) in accordance with Std P8 and P9, requiring the treating solution to contain a minimum of 5% solution of Penta by weight.

TYPICAL USE: Line Construction

PRESERVATIVE TREATED: Creosote or Pentachlorophenol preservatives only

MIL SPEC:AA-58207, July 5, 1994, and Amendment 1, 21 February 1973

CENTER BOLT HOLE DIAMETER: 11/16 Inches

TYPE I: 3-1/4 x 4-1/4

PIN HOLE DATA BRACE

ITEM LENGTH SPACING/INCHES BOLT

NO. NIIN FEET INCHES NUMBER CTR SIDE END DIA. SPACING

0001 00-819-2063 3 0 2 28 N/A 4 9/16 25 0002 00-255-9486 4 0 4 16 12 4 1-17/32 28 0003 00-816-2766 5 0 4 18 17 4 9/16 28 0004 00-816-2761 6 0 4 22 21 4 9/16 32 0005 00-816-2765 6 0 6 16 12 4 9/16 32 0006 00-816-2763 8 0 6 18 17 1/2 4 9/16 32 0007 00-274-4109 8 0 8 16 12 4 1-17/32 32 0008 00-816-2762 8 6 10 16 9 3/4 4 9/16 32 0009 00-816-3283 8 6 10 16 9 3/4 4 9/16 28 0010 00-243-9145 10 0 4 9 1/2 N/A 3 1/2 11/16 N/A 0011 00-988-5235 10 0 8 17 1/2 15 3/4 4 * 42 0012 00-274-4106 10 0 10 16 12 4 1-17/16 42 0013 00-816-2769 10 0 10 32 10 4 9/16 42 0014 00-988-5236 10 0 12 16 9 5/8 3 7/8 * 42 0015 00-171-9129 10 0 0016 00-243-9146 10 0 18 16 8,4,4,8 4 1-17/32 43 0017 00-243-9144 10 0 18 16 8,4,4,8 4 1-9/32 43

TYPE II: 2-3/4 x 3-3/4

ITEM LENGTH SPACING/INCHES BOLT

NO. NIIN FEET INCHES NUMBER CTR SIDE END DIA. SPACING

0018 00-813-2939 3 6 4 16 9-1/2 3-1/2 9/16 28 0019 00-274-4107 3 6 4 16 9-1/2 3-1/2 1-9/32 28 0020 00-813-2940 5 2 6 16 9-3/4 3-1/2 1-9/32 28 0021 00-813-2941 6 10 8 16 9-3/4 3-3/4 9/16 28 0022 00-813-2943 10 0 12 16 9-5/8 3-7/8 9/16 28

TYPE III:3-1/4 x 4-1/4

ITEM LENGTH SPACING/INCHES BOLT

NO. NIIN FEET INCHES NUMBER CTR SIDE END DIA. SPACING

0023 00-816-2768 3 2 2 30 N/A 4 9/16 28 0024 00-988-5237 5 7 4 30 14-1/2 4 * 38 0025 00-068-0392 8 0 6 30 14-1/2 4 1-17/32 38 0026 00-988-5238 9 2 8 30 12 4 * 38

TYPE IV: 3-1/4 x 4-1/4

ITEM LENGTH SPACING/INCHES BOLT

NO. NIIN FEET INCHES NUMBER CTR SIDE END DIA. SPACING

0027 00-816-2767 3 0 2 30 N/A 3 9/16 33 0028 00-988-5239 5 6 4 30 13-1/2 4-1/2 * 36 0029 00-988-5240 7 9 6 30 13-1/2 4-1/2 * 36 0030 00-988-5241 10 0 8 30 13-1/2 4-1/2 * 36

TYPE VI: 4-3/4 x 4-1/4

ITEM LENGTH SPACING/INCHES BOLT

NO. NIIN FEET INCHES NUMBER CTR SIDE END DIA. SPACING

0033 00-988-5244 1 6 2 12 N/A 3 * 16 0034 00-988-5245 6 0 6 16 12 4 * 25 0035 00-988-5246 6 8 6 32 10 4 * 25

TYPE VII CLASS I: 3-1/2 x 4-1/2

ITEM LENGTH SPACING/INCHES BOLT

NO. NIIN FEET INCHES NUMBER CTR SIDE END DIA. SPACING

0034 00-813-2937 5 7 4 30 14-1/2 4 9/16 38 0035 00-255-9485 5 7 4 30 14-1/2 4 1-17/32 42 0036 00-813-2938 8 0 6 30 14-1/2 4 9/16 38 0037 00-291-7929 8 0 8 16 12 4 1-17/32 32

TYPE VII CLASS 2:3-3/4 x 4-3/4

ITEM LENGTH SPACING/INCHES BOLT

NO. NIIN FEET INCHES NUMBER CTR SIDE END DIA. SPACING

0038 00-988-5250 8 0 4 30 N/A 3 * N/A 0039 00-988-5251 10 0 6 38 18-1/2 4 * N/A

* Pin hole diameter must be specified when ordered.

CENTER BOLT HOLE DIAMETER: 13/16 Inches

TYPE V: 3-3/4 x 4-3/4

ITEM LENGTH SPACING/INCHES BOLT

NO. NIIN FEET INCHES NUMBER CTR SIDE END DIA. SPACING

0040 00-988-5243 10 0 8 30 13-5/8 4-1/8 * 44 0041 00-989-2341 10 0 4 38 36 5 * 60

* Pin hole diameter must be specified when ordered

DOWELS, WOOD

(Ash, Beech, Birch, Hickory, Maple, Oak, Sycamore, Sweetgum, and Tupelo Gum)

TYPICAL USE: General Purpose Wood Rod Use

UNIT OF ISSUE: Each

SPECIFICATION: Commercial Item Description, A-A-1975A, 3 Apr 1986, Type I

ITEM DIAMETER LENGTH

NO. NIIN INCHES FEET

0042 00-237-8254 1/8 3 0043 00-223-7182 3/16 3 0044 00-223-0952 5/16 3 0045 00-497-5463 7/16 3 0046 00-978-6858 7/8 3 0047 00-223-0953 1 3 0048 00-223-0954 1-1/8 3 0049 00-223-0955 1-1/4 3 0050 00-223-0956 1-1/2 3

HARDWOOD LUMBER

Hardwood "Standard Grades" MM-L-736 Type I Cutting grades based on the percentage of clear cuttings available.

This lumber is intended for the manufacture of furniture and other fabricated products where a high quality appearance is essential.

Hardwood Construction Lumber - Including Boards, Dimension, and Timbers, MM-L-736 Type II. This lumber is intended for use in construction and related applications where it will be used essentially in the size procured.

Hardwood Lumber for Special Use - Including the following: Bending Oak, Mahogany Planking (Ship), Oak Planking (Ship), Vehicle Lumber, Maple Flooring-MM-L-736 Type Ill, Oak Flooring-MM-L-736 Type Ill.

Lumber, Hardwood (WHITE ASH)

TYPICAL USE: Cutting grade for remanufacture

GRADE GRADING RULE SPECIES

No. 1 Common NHLA White Ash

MOISTURE CONTENT: 12 percent maximum.

SURFACING: Rough

LENGTH: 4 feet and longer—permitting a maximum of 10% to be furnished in 4 through 7 foot lengths, of which ½ may be 4 and 5 foot lengths, and requiring a minimum of 30% to be 14 feet or longer.

WIDTH: 3 inches and wider—permitting a maximum of 5% to be furnished in 3 inch widths, and requiring a minimum of 60% to be 6 inches and wider.

FED SPEC: MM-L-736C, 9 March 1973, and Amendment 1, 11 March 1983.

ITEM NOMINAL

NO. NIIN THK INCHES

0051 00-267-2161 1 0052 00-267-2162 1-1/4 0053 00-267-2163 1-1/2

0054 00-267-2164 2

TYPICAL USE: Cutting grade for remanufacture.

No. 1 Common NHLA White Ash

SURFACING: Rough

LENGTH: 6 through 16 feet—permitting a maximum of 40% to be in 6 through 11 foot lengths, and requiring a minimum of 25% to be 14 feet through 16 feet.

WIDTH: 4 inches and wider—requiring a minimum of 35% to be 7 inches and wider.

FED SPEC: MM-L-736C, 9 March 1973, and Amendment 1, 11 March 1983.

ITEM NOMINAL MOISTURE

NO. NIIN THK INCHES CONTENT/PERCENT

0055 00-267-2155 1 12 0056 00-267-2156 1-1/4 12 0057 00-267-2157 1-1/2 12 0058 00-267-2158 2 12 0059 00-267-2159 2-1/2 15 0060 00-267-2551 3 15 0061 00-267-2548 4 15

Lumber, Hardwood (BIRCH)

GRADE GRADING RULE SPECIES

Selects NHLA Birch

SURFACING: S2S

LENGTH: 6 feet and longer—permitting a maximum of 30% to be in 6 through 11 foot lengths, of which 1-6 may be 6 and 7 foot lengths and requiring a minimum of 25% to be 7 inches and wider.

WIDTH: 4 inches and wider—requiring a minimum of 35% to be 7 inches and wider.

FED SPEC: MM-L-736C, 9 March 1973, and Amendment 1, 11 March 1983.

ITEM NOMINAL MOISTURE

NO. NIIN THK INCHES CONTENT/PERCENT

0062 00-274-5004 1 12 0063 00-274-5003 1-1/4 12 0064 00-274-5002 1-1/2 12 0065 00-274-5001 2 12 0066 00-274-4999 2-1/2 15 0067 00-274-4998 3 15 0068 00-274-4997 4 15

TYPICAL USE: Cutting grade for remanufacture. Highest quality, most expensive.

FAS (Firsts and Seconds) NHLA Birch

MOISTURE CONTENT: 12 percent maximum. SURFACING: S2S

LENGTH: 8 through 16 feet—permitting a maximum of 30% to be 8 through 11 feet, of which ½ may be 8 and 9 feet.

WIDTH: 6 inches and wide—requiring a minimum of 35% of the line item quantity to be 9 inches and wider.

FED SPEC: MM-L-736C, 9 March 1973, and Amendment 1, 11 March 1983.

ITEM NOMINAL

NO. NIIN THK INCHES

0069 00-050-0611 1

Lumber, Hardwood (HARD MAPLE)

No. 1 Common NHLA Hard Maple

SURFACING: Rough

LENGTH: 4 feet and longer—permitting a maximum of 10% to be in 4 through 7 foot lengths, and of which ½ may be 4 and 5 foot lengths, and requiring a minimum of 30% to be 14 feet and longer.

WIDTH: 3 inches and wider—permitting a maximum of 5% to be in 3 inch widths and requiring a minimum of 60% to be 6 inches and wider

FED SPEC: MM-L-736D, 6 MAY 2008, SUPERSEDING, MM-L-736C, March 9, 1973

ITEM NOMINAL MOISTURE

NO. NIIN THK INCHES CONTENT/PERCENT

0070 00-267-2280 1 12 0071 00-267-2281 1-1/4 12 0072 00-267-2278 1-1/2 12 0073 00-267-2279 2 12 0074 00-267-2276 2-1/2 15 0075 00-267-2125 3 15 0076 00-267-2126 4 15

GRADE GRADING SPECIES

Selects NHLA Hard Maple

SURFACING: Rough

LENGTH: 6 feet and longer—permitting a maximum of 30% to be in 6 through 11 foot lengths, of which 1/6 may be 6 and 7 foot lengths, and requiring a minimum of 25% to be 14 feet and longer.

WIDTH: 4 inches and wider—requiring a minimum of 35% to be 7 inches and wider

ITEM NOMINAL MOISTURE

NO. NIIN THK INCHES CONTENT/PERCENT

0077 00-267-2296 1 12

0078 00-267-2297 1-1/4 12 0079 00-267-2282 1-1/2 12 0080 00-267-2283 2 12 0081 00-267-2295 2-1/2 15 0082 00-267-2081 3 15 0083 00-267-2082 4 15

FAS (Firsts and Seconds) NHLA Hard Maple

MOISTURE CONTENT: 12 percent maximum

SURFACING: Rough

LENGTH: 8 feet and longer—permitting a maximum of 30% to be in 8 through 11 foot lengths, of which ½ may be 8 and 9 foot lengths and requiring a minimum of 40% to be 14 feet or longer.

WIDTH: 6 inches and wider—requiring a minimum of 50% to be 8 inches and wider.

FED SPEC: MM-L-736D, 6 MAY 2008, SUPERSEDING, MM-L-736C, March 9, 1973

ITEM NOMINAL

0084 00-267-2293 2

Lumber, Hardwood (MAHOGANY)

TYPICAL USE: Cutting grade for remanufacture

No. 1 Common NHLA Mahogany (African, Tropical American or Dark Red Philippine)

SURFACING: Rough

LENGTH: 6 feet and longer—permitting a maximum of 15% to be in 6 or 7 foot lengths, and requiring a minimum of 30% to be 14 feet and longer.

WIDTH: 4 inches and wider—requiring a minimum of 60% to be 6 inches and wider.

FED SPEC: MM-L-736D, 6 MAY 2008, SUPERSEDING, MM-L-736C, March 9, 1973

ITEM NOMINAL MOISTURE

NO. NIIN THK INCHES CONTENT/PERCENT

0085 00-267-2322 1 12 0086 00-267-2323 1-1/4 12 0087 00-267-2413 2 12 0088 00-267-2429 3 15

Selects NHLA Mahogany (African, Tropical American, or Dark Red Philippine)

SURFACING: Rough

LENGTH: 8 feet and longer—permitting a maximum of 25% to be in 8 through 11 foot lengths, of which ½ may be 8 and 9 foot lengths, and requiring a minimum of 30% to be 14 feet and longer.

WIDTH: 6 inches and wider—requiring a minimum of 60% to be in 8 inches and wider.

FED SPEC: MM-L-736C, 9 March 1973, and Amendment 1, 11 March 1983.

ITEM NOMINAL MOISTURE

NO. NIIN THK INCHES CONTENT/PERCENT

0089 00-267-2416 1 12 0090 00-267-2417 1-1/4 12 0091 00-267-2418 1-1/2 12 0092 00-267-2419 2 12 0093 00-267-2431 3 15 0094 00-267-2432 4 15

FAS (Firsts and NHLA Mahogany (African, Tropical American, Philippine) or Dark Red Seconds)

MOISTURE CONTENT: 12 percent maximum.

SURFACING: S2S

LENGTH: 8 feet and longer—permitting a maximum of 25% to be in 8 through 11 foot lengths, and requiring a minimum of 25% to be in lengths of 14 through 16 feet or longer.

WIDTH: 6 inches and wider—requiring a minimum of 35% to be in 10 inches and wider

FED SPEC: MM-L-736C, 9 March 1973, and Amendment 1, 11 March 1983.

ITEM NOMINAL

NO. NIIN THK INCHES

0095 00-275-2544 1 0096 00-275-2547 1-1/4 0097 00-275-2546 1-1/2 0098 00-275-2549 2 0099 00-275-2548 3

Lumber, Hardwood (POPLAR)

Selects NHLA Poplar

SURFACING: S2S

LENGTH: 8 feet and longer—permitting a maximum of 30% to be in 8 through 11 foot lengths, of which ½ may be 8 and 9 foot lengths, and requiring a 20% to be in lengths 14 feet and longer.

WIDTH: 6 inches and wider—requiring a minimum of 35 to be 7 inches and wider.

0100 00-275-2557 1 12 0101 00-275-2556 1-1/4 12 0102 00-275-2559 1-1/2 12 0103 00-275-2558 2 12 0104 00-275-2561 3 15

Lumber, Hardware (WALNUT)

Selects NHLA Walnut (steamed walnut permitted)

MOISTURE CONTENT: 12 percent maximum

SURFACING: S2S

LENGTH: 6 feet and longer—requiring a minimum for 70% to be furnished in lengths 8 foots and longer, of which 20% must be 10 feet and longer.

WIDTH: 4 inches and wider—requiring a minimum of 35% to be 7 inches and wider.

FED SPEC: MM-L-736D, 6 MAY 2008, SUPERSEDING, MM-L-736C, March 9, 1973

ITEM NOMINAL

NO. NIIN THK INCHES

0105 00-275-2551 1 0106 00-275-2550 1-1/4 0107 00-275-2553 1-1/2 0108 00-275-2552 2

FAS (Firsts NHLA Walnut (steamed walnut permitted) and Seconds)

MOISTURE CONTENT: 12 percent maximum

SURFACING: Rough

LENGTH: 6 feet and longer—requiring a minimum of 60% to be furnished in lengths 8 foots and longer, of which 20% must be 10 feet and longer.

WIDTH: 5 inches and wider—requiring a minimum of 35% to be 8 inches and wider.

FED SPEC: MM-L-736C, 9 March 1973, and Amendment 1, 11 March 1983.

ITEM NOMINAL

NO. . NIIN THK INCHES

0109 00-068-1113 1 0110 00-086-2229 2

Lumber, Hardwood (WHITE OAK)

FAS NHLA White Oak

MOISTURE CONTENT: 12 percent maximum

LENGTH: 8 feet and longer—permitting a maximum of 30% to be in 8 through 11 foot length, of which ½ may be 8 and 9 foot lengths, and requiring a minimum of 40% to be 14 feet or longer.

WIDTH: 6 inches and wider—requiring a minimum of 60% to be 8 inches and wider.

FED SPEC: MM-L-736C, 9 March 1973, and Amendment 1, 11 March 1983.

ITEM NOMINAL

NO. NIIN THK INCHES SURFACING

0111 00-267-2392 1-1/4 Rough 0112 00-267-2398 2 S2S

No. 1 Common NHLA White Oak

SURFACING: Rough

LENGTH: 4 feet and longer—permitting a maximum of 10% to be in 4 through 7 foot lengths, of which ½ may be 4 and 5 foot lengths, and requiring a minimum of 30% to be 14 feet and longer.

WIDTH: 3 inches and wider—permitting a maximum of 5% to be in 3 inch widths, and requiring a minimum of 60% to be in 6 inches and wider.

0113 00-267-2385 1 12 0114 00-267-2386 1-1/4 12 0115 00-267-2288 1-1/2 12 0116 00-267-2289 2 12 0117 00-267-2286 2-1/2 15 0118 00-267-2284 3 15 0119 00-267-2285 4 15

TYPICAL USE: Cutting grade for remanufacture.

GRADE GRADING RULE SPECIES

Selects NHLA White Oak

SURFACING: Rough

LENGTH: 6 feet and longer—permitting a maximum of 30% to be in 6 through 11 foot lengths, of which 1/6 may be 6 and 7 foot lengths, and requiring a minimum of 30% to be 14 feet or longer.

WIDTH: 4 inches and wider—requiring a minimum of 605 to be 6 inches and wider.

FED SPEC: MM-L 736C, 9 March 1973, and Amendment 1, 11 March 1983.

0120 00-267-2394 1 12 0121 00-267-2401 1-1/4 12 0122 00-267-2402 1-1/2 12 0123 00-267-2403 2 12 0124 00-267-2404 2-1/2 15 0125 00-267-2405 3 15 0126 00-267-2406 4 15

Lumber, Hardwood (ALL HARDWOOD SPECIES)

TYPICAL USE: Dunnage

No. 3 Const. Bd NHLA All hardwood species No. 3A/3B Common NHLA

MOISTURE CONTENT: Any stage of seasoning

SURFACING: Rough

LENGTH: 6 feet through 16 feet.

WIDTH: 4 inches and wider.

THICKNESS: 3/4 to 1-l/4 inches.

ITEM

NO. NIIN

0127 00-267-2379

TYPICAL USE: Pallets, blocking, and bracing.

No. 2 Const. Bd NHLA All hardwood species

SURFACING: S2S

LENGTH: 6 feet and longer—permitting a maximum of 10% to be furnished in 6 through 9 foot lengths and requiring a minimum of 40% to be 14 feet and longer.

WIDTH: 4 inches and wider—requiring a minimum of 40% to be 8 inches and wider.

FED SPEC: MM-L-736C, 9 March 1973, and Amendment 1, 11 March 1983.

ITEM NOMINAL MOISTURE

NO. NIIN THK INCHES CONTENT/PERCENT

0128 00-274-5374 l 19 0129 00-274-5375 1-1/4 22 0130 00-274-5376 1-1/2 24

TYPICAL USE: Blocking, bracing, heavy equipment pile support, etc.

GRADE GRADING RULE SPECIES

No. 2 Dimension NHLA All hardwood species

SURFACING: S2S

LENGTH: 8 feet and longer—permitting a maximum of 5% to be in 8 and 9 foot lengths and requiring a minimum of 40% to be in lengths 14 feet and longer.

WIDTH: 4 inches and wider—requiring a minimum of 40 to be in widths 8 inches and wider.

FED SPEC: MM-L-736D, 6 MAY 2008, SUPERSEDING, MM-L-736C, March 9, 1973

ITEM NOMINAL MOISTURE

NO. NIIN THK INCHES CONTENT/PERCENT

0131 00-274-5377 2 24 0132 00-274-5378 2-1/2 24 0133 00-274-5379 3 Any stage of seasoning

Lumber, Hardwood (RED/WHITE OAK)

TYPICAL USE: Wedges and general construction.

Common Dimension NHLA Red or White Oak

MOISTURE CONTENT: Any stage of seasoning

SURFACING: Rough

LENGTH: 10 feet and longer—requiring a minimum of 60% to be 14 feet and longer.

FED SPEC: MM-L-736D, 6 MAY 2008, SUPERSEDING, MM-L-736C, March 9, 1973

FULL SAWN SIZE

ITEM THK WIDTH

NO. NIIN INCHES INCHES

0134 00-267-2068 3 4 0135 00-267-2069 3 6 0136 00-267-2070 3 8 0137 00-267-2071 3 10 0138 00-267-2072 3 12 0139 00-267-2073 3-1/2 4 0140 00-267-2074 3-1/2 6 0141 00-267-2075 3-1/2 8 0142 00-267-2076 3-1/2 10 0143 00-267-2133 3-1/2 12 0144 00-267-2134 4 4 0145 00-267-2135 4 6 0146 00-267-2136 4 8 0147 00-267-2043 4 10 0148 00-267-2044 4 12

TYPICAL USE: Wedges and general construction

Common Dimension NHLA Red or White Oak

MOISTURE CONTENT: Any stage of seasoning.

LENGTH: 10 feet and longer—requiring a minimum of 60% to be 14 feet and longer.

FED SPEC: MM-L-736D, 6 MAY 2008, SUPERSEDING, MM-L-736C, March 9, 1973

FULL SAWN SIZE

ITEM THK WIDTH

NO. NIIN INCHES INCHES

0149 00-267-2045 5 6 0150 00-267-2046 5 8 0151 00-267-2047 5 10 0152 00-267-2048 5 12 0153 00-267-2049 6 6 0154 00-267-2050 6 8 0155 00-267-2051 6 10 0156 00-267-2052 6 12 0157 00-267-2053 6 16 0158 00-267-2054 8 8 0159 00-267-2101 8 10 0160 00-267-2102 8 12 0161 00-267-2137 10 10 0162 00-267-2138 10 12 0163 00-267-2139 12 12 0164 00-267-2140 12 16 0165 00-267-2097 14 14 0166 00-267-2098 16 16

TYPICAL USE: Blocking, wedges, heavy equipment pile supports, etc.

Sound Square Edge NHLA Red or White Oak

MOISTURE CONTENT: Any stage of seasoning

SURFACING: Rough

LENGTH: 8 feet and longer—permitting a maximum of 5% to be furnished in 8 and 9 foot lengths, and requiring a minimum of 40% to be furnished in lengths 14 feet and longer

WIDTH: requiring a minimum of 40% to be a minimum of 4 inches wider than the width specified for each item

FED SPEC: MM-L-736C, 9 March 1973, and Amendment 1, 11 March 1983.

Random:

FULL SAWN SIZE

NO. THK WIDTH LENGTH

ITEM NIIN INCHES INCHES FEET

0167 00-274-5380 4 4 and wider Random 0168 00-274-5381 6 6 and wider Random 0169 00-274-5382 8 8 and wider Random

Specific:

FULL SAWN SIZE

NO. THK WIDTH LENGTH

ITEM NIIN INCHES INCHES FEET

0000 00-479-0029 3 4 and wider 4

TYPICAL USE: Dry docks and blocking

Select Car Stock NHLA White Oak

MOISTURE CONTENT. Any stage of seasoning

SURFACING: Rough

LENGTH: 8 feet and longer in 4 ft. increments, 60% to be 12’ and longer in 4 increments.

FED SPEC: MM-L-736C, 9 March 1973, and Amendment 1, 11 March 1983.

FULL SAWN SIZE

ITEM THK WIDTH

NO. NIIN INCHES INCHES

0000 01-582-7710 2 14 0000 01-570-7198 6 14 0000 01-570-7273 8 14 0152 01-591-7509 9 14 0153 00-267-2055 10 12 0154 00-267-2063 12 14 0155 01-570-7138 13 15 0156 01-573-0936 14 14

TYPICAL USE: Propeller shaft bearings.

UNIT OF ISSUE: LB

Logs may be supplied hexagonal in cross-section.

MIL SPEC: Lignum-vitae logs shall conform to Type A of MIL-2646A, 12 January 1953, and Interim Amendment 1 (SHIPS), 27 August 1962.

ITEM DIAMETER LENGTH

NO. NIIN INCHES FEET

0172 00-263-3221 10-18 3 to 5-1/2

TYPICAL USE: Bending Oak for ship and boat construction

PRESERVATIVE TREATMENT: Waterborne preservatives.

MOISTURE CONTENT: 15% minimum

SURFACING: Rough

SIDE COATING: Not required

LENGTH: 8 feet and longer—requiring a minimum of 50% to be 12 feet and longer

MIL SPEC: Shall conform to Class 5 of MIL-L-2037E, 21 August 1990.

ITEM NOMINAL

NO. NIIN GRADE THK INCHES WIDTH INCHES

0173 00-267-2604 A 1-1/4 6 and Wider 0174 00-267-2605 A 1-1/2 6 and Wider 0175 00-267-2606 B 2 6 and Wider 0176 00-267-2607 B 2-1/2 6 and Wider

0177 00-267-2608 B 4 6 Nominal 0178 00-267-2610 B 4-1/2 4-1/2 Nominal

TYPICAL USE: Mahogany planking for boat and ship construction

SURFACING: Rough

LENGTH: 8 feet and longer—requiring a minimum of 60% to be 16 feet and longer

WIDTH: 6 inches and wider—requiring a minimum of 60% to be 10 inches and wider.

MIL SPEC: Shall conform to Type lI Grade B of MIL-L-2594D, 14 March 1988

ITEM NOMINAL

NO. NIIN THK INCHES

0179 00-267-2337 1 0180 00-267-2338 1-1/4 0181 00-267-2339 1-1/2 0182 00-267-2340 2

TYPICAL USE: Oak planking for ships

PRESERVATIVE TREATMENT: Waterborne preservatives.

MOISTURE CONTENT: 17% (+ or - 3%)

SURFACING: Rough

SIDE COATING: Not required

LENGTH: 8 feet and longer—requiring a minimum of 50% to be 16 feet and longer

MIL SPEC: Shall conform to Class 1, (Planking), Grade A of MIL-L-2037E, 21 August 1990.

ITEM NOMINAL SIZE INCHES

NO. NIIN THK WIDTH

0183 00-255-9262 1 8 and wider 0184 00-255-9264 1-1/4 8 and wider 0185 00-255-9265 1-1/4 8 only 0186 00-255-9268 1-1/2 8 and wider 0187 00-255-9269 2 8 and wider 0188 00-255-9273 3 8 and wider

TYPICAL USE: Construction and repair of vehicle bodies, trailer bed, etc.

Vehicle Lumber NHLA Ash, Red or White Oak

SURFACING: S2S

LENGTH: 8 feet through 16 feet—permitting a maximum of 25% to be furnished in 8 through 11 foot lengths, of which ½ may be 8 and 9 foot lengths.

WIDTH: 4 inches and wider—permitting a maximum of 10% to be furnished in 4 and 5 widths, and requiring a minimum of 25% to be 10 inches and wider.

FED SPEC: MM-L736C, 9 March 1973, and Amendment 1, 11 March 1983.

ITEM NOMINAL THK MAXIMUM MOISTURE

NO. NIIN INCHES CONTENT PERCENT

0189 00-274 4995 1 20 0190 00-274 4994 2 25 0191 00-274 4993 3 27 0192 00-274 4992 4 30

LUMBER, HARDWOOD, FLOORING

Lumber, Hardwood, Flooring (HARD MAPLE)

TYPICAL USE: Gymnasiums, offices, residences, etc.

GRADE GRADING RULE SPECIES

Second and Better MFMA Hard Maple (Standard)

MOISTURE CONTENT: 9 percent maximum

SURFACING: T and G, End-match

LENGTH: 15 inches through 8 feet, to be specified by the ordering activity.

FED SPEC: MM-L-736C, 9 March 1973, and Amendment 1, 11 March 1983

ITEM ACTUAL SIZE INCHES

NO. NIIN THK WIDTH

0193 00-266-7006 25/32 2-1/4

Lumber, Hardwood, Flooring (RED/WHITE OAK)

TYPICAL USE: Excellent appearance oak flooring

Select NOFMA Red or White Oak (Plain or Quarter Sawn)

MOISTURE CONTENT: 9 percent maximum

SURFACING: T and G, End-matched

LENGTH: 1-1/4 foot and up. Average length 3 1/4 feet

FED SPEC: MM-L-736C, 9 March 1973, and Amendment 1, 11 March 1983

ITEM ACTUAL SIZE INCHES

0194 00-266-7010 3/4 2-1/4

TYPICAL USE: Highest quality oak flooring

Clear NOFMA Red or White Oak (Plan or Quarter Sawn)

MOISTURE CONTENT: 9 percent maximum

SURFACING: T and G, End-matched

LENGTH: 1-1/4 foot and up. Average length 3-3/4 feet

FED SPEC: MM-I-736C, 9 March 1973, and Amendment 1, 11 March 1983

ITEM ACTUAL SIZE INCHES

0195 00-266-7008 3/4 2-1/4

TYPICAL USE: Residential flooring

No. 1 Common NOFMA Red or White Oak (Plain sawn)

MOISTURE CONTENT: 9 percent maximum

SURFACING: T and G, End-matched

LENGTH: 1-1/4 foot and up. Average length 2-3/4 feet.

FED SPEC: MM-L-736C, 9 March 1973, and Amendment 1, 11 March 1983

ITEM ACTUAL SIZE INCHES

0196 00-266-7012 3/4 2-1/4

WOOD, LAMINATED, DECKING

TYPICAL USE: Flooring for MILVAN Containers ONLY. (Preservative treated).

SPECIES: Oak

SURFACING: S2S & S/L

UNIT OF ISSUE: EA

ITEM THK WIDTH LENGTH

NO. NIIN INCHES INCHES INCHES MERADCOM DRAWING

0197 00-270-6022 1-1/8 11-1/2 228-7/8 97403-13219E0078 (RIGHT Side plank) 0198 00-270-6031 1-1/8 11-1/2 228-7/8 97403-13219E0079 (LEFT Side plank) 0199 00-270-6048 1-1/8 11-1/2 228-7/8 97403-13219E0080 (CENTER planks)

SOFTWOOD LUMBER

LUMBER, SOFTWOOD, BOARD

Select and Finish Lumber: Including Boards and Dimension. This lumber is intended for use where good appearance and finishing qualities are desired. It is not graded or rated for its strength properties.

Common Lumber: Including Boards and Dimension. This lumber is suitable for general building, construction, and utility purposes (See Typical Use)

Structural lumber2” or more in thickness, graded under the National Grading Rule (NGR) for Softwood

Dimension Lumber is rated for its strength properties. Stress rated grades include: Select Structural, No.1, No.2, No.3, Construction, Standard, Utility, and Stud.

Note:

a. Species within the same grade and size are considered interchangeable for all normal requirements.

b. Dimension lumber graded under the NGR will be similar in appearance regardless of species or grading agency.

Softwood Lumber for Special Uses: Including the following: Lath, Tank Stock, Cedar planking (Ship), Decking, and Planking (Ship), Flooring, Scaffold Plank (untreated), Shop lumber, Siding, Planking.

Softwood Timbers: Strength Rated (5x5 and larger)

Note: Species within the same grade and size are considered interchangeable for all normal requirements

* NOTE: Specific lengths shall be ordered only when a true requirements exists. They shall not be requisitioned for the sole purpose of convenient tallying of storage.

Lumber, Softwood, Board

TYPICAL USE: Good quality finish for cornice trim, door and window casing, and cabinet work.

GRADE GRADING RULE SPECIES

D Select NELMA All species permitted unless otherwise specified by the ordering D Select NSLB activity.

Clear RIS D Finish SPIB *D Finish WCLIB *B Finish grade Western Cedars acceptable.

D Sel/Quality or WWPA Prime Fin.

MOISTURE CONTENT: 15 percent maximum.

SURFACING: S4S

LENGTH: 4 feet and longer, to be specified by the ordering activity.

FED SPEC: MM-L-751H, 13 August I970.

ITEM NOMINAL SIZE

NO. NIIN THK INCHES WIDTH INCHES

0200 00-551-8689 1 4 0201 00-551-8688 1 6 0202 00-551-8687 1 8

0203 00-551-8686 1 10 0204 00-551-8705 1 12 0205 00-978-6648 1-1/4 6 0206 00-978-6645 1-1/4 8 0207 00-978-6646 1-1/4 10 0208 00-978-6644 1-1/4 12

TYPICAL USE: High quality finish interior trim, cabinet work, casing, baseboard, door and window trim.

C Select NELMA All species permitted unless otherwise specified by the ordering C and Btr Sel NSLB activity.

Clear RIS C Finish SPIB *C and Btr Fin. WCLIB *A Finish grade Western Cedar acceptable C 8eVChoice or WWPA Superior Fin.

MOISTURE CONTENT: 15 percent maximum.

SURFACING: S4S

LENGTH: 4 feet and longer, to be specified by the ordering activity.

FED SPEC: MM-L-751H, 13 August 1970.

ITEM NOMINAL SIZE

NO. NIIN THK INCHES WIDTH INCHES

0209 00-550-6968 1 4 0210 00-550-6969 1 6 0211 00-550-6970 1 8 0212 00-550-6939 1 10 0213 00-550-6940 1 12 0214 00-555-9067 1-1/4 4 0215 00-555-9066 1-1/4 6 0216 00-555-9065 1-1/4 8 0217 00-555-9064 1-1/4 10 0218 00-555-9063 1-1/4 12 0219 00-555-9062 1-1/2 4 0220 00-555-9061 1-1/2 6 0221 00-555-9060 1-1/2 8 0222 00-555-9059 1-1/2 10 0223 00-555-9058 1-1/2 12

TYPICAL USE: Low quality sheathing, dunnage, boxing, and crating.

No. 5 Corn/Indus NELMA All species permitted unless otherwise specified by the ordering 5 Common NSLB activity.

Economy RIS No. 4 Boards SPIB Economy WCLIB 5 Com/Econ/Indus WWPA

MOISTURE CONTENT: 19 percent maximum.

SURFACING: Any degree of surfacing permitted.

LENGTH: 4 feet and longer—permitting a maximum of 20% to be furnished in 4 through 9 foot lengths, and requiring a minimum of 20% to be 14 feet and longer.

WIDTH: 6 inches and wider—requiring a minimum of 30% to be 8 inches and wider

FED SPEC: MM-L-751H, 13 August 1970.

ITEM NOMINAL

0224 00-272-7752 1

TYPICAL USE: Temporary sheathing, dunnage, boxing and crating.

No. 4 Com/Std NELMA All species permitted unless otherwise specified by the ordering 4 Common NSLB activity.

Merchantable RIS No. 3 Boards SPIB Utility WCLIB 4 Com/Util WWPA

MOISTURE CONTENT: 19 percent maximum.

SURFACING: S4S

LENGTH: 6 feet and longer,--permitting a maximum of 10% to be furnished in 6 through 9 foot lengths, and requiring a minimum of 30% to be 14 feet and longer.

FED SPEC: MM-L-751H, 13 August 1970.

ITEM NOMINAL SIZE

NO. NIIN THK INCHES WIDTH INCHES

0225 00-220-6110 1 4 0226 00-220-6112 1 6 0227 00-220-6114 1 8 0228 00-220-6118 1 12

TYPICAL USE: Light weight box and crate construction.

No. 3 Com/Std NELMA All species permitted unless otherwise specified by the ordering 3 Common NSLB activity.

No. 2 Boards SPIB Standard WCLIB 3 Com/Std WWPA

MOISTURE CONTENT: 19 percent maximum.

SURFACING & THICKNESS: S48 to 1/2 inch thick.

LENGTH: 6 feet and longer—permitting a maximum of 10% to be furnished in 6 through 9 foot length, and requiring a minimum of 30% to be 14 feet and longer.

FED SPEC: MM-L-751H, 13 August 1970.

ITEM NOMINAL

NO. NIIN WIDTH INCHES

0229 00-555-9080 6

TYPICAL USE: Cleat stock for boxes, flooring strips, and subflooring.

No. 3 Com/Std NELMA All species permitted unless otherwise specified by the ordering 3 Common NSLB activity.

No. 2 Boards SPIB Standard WCLIB 3 Com/Std WWPA

MOISTURE CONTENT: 19 percent maximum.

SURFACING: S4S or S2S1E.

LENGTH: 2 feet and longer—permitting a maximum of 5 % to be furnished in 2 through 4 foot lengths, and requiring a minimum of 70% to be 10 feet and longer.

NOTE: This item may be ripped from wider pieces which have been grade stamped.

ITEM NOMINAL SIZE

NO. NIIN THK INCHES WIDTH INCHES

0230 00-555-9081 1 2 0231 00-269-9484 1 3

TYPICAL USE: Roof and wall sheathing, subflooring, boxes, crates, and pallets.

No. 3 Com/Std NELMA All species permitted unless otherwise specified by the ordering 3 Common NSLB activity.

Const Corn RIS No. 2 Boards SPIB Standard WCLIB 3 Com/Std WWPA

MOISTURE CONTENT: 19 percent maximum.

SURFACING: S4S

LENGTH: 6 feet and longer permitting a maximum of 10% to br5e furnished in 6 through 9 foot lengths and requiring a minimum of 30% to be 14 feet and longer.

FED SPEC: MM-L-751H, 13 August 1970. Replaced by PS 20 1997.

Random:

ITEM NOMINAL SIZE

NO. NIIN THK INCHES WIDTH INCHES

0232 00-272-9060 1 3 0233 00-220-6078 1 4 0234 00-220-6080 1 6 0235 00-220-6082 1 8 0236 00-220-6084 1 10 0237 00-220-6086 1 12 0238 00-220-6090 1-1/4 4 0239 00-220-6092 1-1/4 6 0240 00-220-6094 1-1/4 8 0241 00-220-6096 1-1/4 10 0242 00-220-6098 1-1/4 12

0243 00-220-6102 1-1/2 6 0244 00-220-6104 1-1/2 8 0245 00-220-6106 1-1/2 10 0246 00-220-6108 1-1/2 12

Specific:

ITEM NOMINAL SIZE

NO. NIIN THK INCHES WIDTH INCHES HEIGHT FEET

0000 01-433-8579 1-1/2 4 8 0000 01-433-8589 1-1/2 4 12 0000 01-433-1145 1-1/2 4 16 0000 01-433-8595 1-1/2 6 8 0000 01-433-8603 1-1/2 6 12 0000 01-433-1165 1-1/2 6 14 0000 01-433-1173 1-1/2 6 16 0000 01-433-8509 1-1/2 8 8 0000 01-433-8612 1-1/2 8 12 0000 01-433-1183 1-1/2 8 16 0000 01-433-8619 1-1/2 10 8 0000 01-433-8623 1-1/2 10 12 0000 01-433-1193 1-1/2 10 16 0000 01-433-8626 1-1/2 12 8 0000 01-433-8629 1-1/2 12 12 0000 01-433-1199 1-1/2 12 16

TYPICAL USE: Roof and wall sheathing, subflooring, boxes, and crates.

No. 3 Com/Std NELMA All species permitted unless otherwise specified by the ordering 3 Common NSLB activity.

Const Cora RIS No. 2 Boards SP1B Standard WCLIB 3 Com/Std WWPA

MOISTURE CONTENT: 19 percent maximum.

SURFACING: S2S and CM

LENGTH: 6 feet and longer—permitting a maximum of 10% to be furnished in 6 through 9 foot lengths, and requiring a minimum of 30% to be 14 feet and longer.

0247 00-272-9052 1 4 0248 00-132-7106 1 6 0249 00-132-7107 1 8

TYPICAL USE: Roof and wall sheathing, subflooring.

No. 3 Com/Std NELMA All species permitted unless otherwise specified by the ordering 3 Common NSLB activity.

Const Cora RIS No. 2 Boards SPIB Standard WCLIB 3 Com/Std WWPA

MOISTURE CONTENT: 19 percent maximum.

SURFACING: S2S and S/L

LENGTH: 6 feet and longer—permitting a maximum of 10% to be furnished in 6 through 9 foot lengths, and requiring a minimum of 30% to be 14 feet and longer.

FED SPEC: MM-L-751H, 13 August 1970.

ITEM NOMINALSIZE

NO. NIIN THK INCHES WIDTH INCHES

0250 00-132-7098 1 6 0251 00-197-3006 1 8

TYPICAL USE: High quality construction, sheathing, and blocking.

No. 2 Com/Prem NELMA All species permitted unless otherwise specified by the ordering 2 Common NSLB activity.

Select RIS No. 1 Boards SPIB Construction WCLIB 2 Com/Const/Ster WWPA

MOISTURE CONTENT: 19 percent maximum.

SURFACING: S48

LENGTH: 6 feet and longer—permitting a maximum of 10% to be furnished in 6 through 9 foot lengths, and requiring a minimum of 30% to be 14 feet and longer.

FED SPEC: MM-L-751H, 13 August 1970.

Random:

ITEM NOMINAL SIZE

NO. NIIN THK INCHES WIDTH INCHES

0252 00-152-0404 1 4 0253 00-167-6851 1 6 0254 00-167-6852 1 8 0255 00-167-6853 1 10 0256 00-167-6854 1 12

Specific:

ITEM NOMINAL SIZE

NO. NIIN THK INCHES WIDTH INCHES HEIGHT FEET

0000 01-586-2484 1 4 16 0000 01-586-2612 1 6 10 0000 01-586-2448 1 6 12 0000 01-586-2473 1 8 10 0000 01-586-2620 1 8 12 0000 01-586-2462 1 10 10 0000 01-586-2349 1 10 12 0000 01-586-2362 1 12 10 0000 01-586-6304 1 12 12

TYPICAL USE: Tank (container) and boat construction.

Tank Stock RIS Redwood Under Four Inch WCLIB Douglas-Fir, Western Red Cedar Tank Stock

MOISTURE CONTENT: 12 percent maximum.

SURFACING: S4S

LENGTH: 8 feet and longer—permitting a maximum of 10% to be furnished in 8 foot lengths, and requiring a minimum of 40% to be 14 feet and longer.

WIDTH: 6 inches and wider.

FED SPEC: MM-L-751H, 13 August 1970.

ITEM NET SURFACED

NO. NIIN THK INCHES

0257 00-I97-3003 1

TYPICAL USE: CEDAR planking for boats and ships.

SURFACING: Rough

LENGTH: 12 feet and longer—requiring a minimum of 50% to be 16 feet or longer

WIDTH: 6 inches and wider—requiring a minimum of 60% to be 8 inches and wider, of which 15% must be 10 inches and wider

MIL SPEC: Shall conform to Type I, Grade A; of MIL-L-2594D, 14 March 1988. (Port Orford or Alaska yellow cedar only.).

ITEM

NO. NIIN NOMINAL THK (INCHES)

0258 00-220-4702 1 0259 00-220-4706 1-1/4 0260 00-220-4711 1-1/2

LUMBER, SOFTWOOD, DIMENSION

TYPICAL USE: Good quality finish, interior trim, door and window trim, stairwell framing, cabinets.

GRADE GRADING RULE SPECIES

D Select NELMA All species permitted unless otherwise specified by the ordering D Select NSLB activity.

Clear RIS D Finish SPIB *D Finish WCLIB *B Finish grade Western Cedars acceptable.

D Sel/Quality or WWPA Prime Fin.

MOISTURE CONTENT: 15 percent maximum.

SURFACING: S4S

LENGTH: 4 feet and longer—permitting a maximum of 5% to be furnished in 4 through 7 foot lengths, and requiring a minimum of 50% to be 12 feet and longer.

FED SPEC: MM-L-751H, 13 August 1970.

ITEM NOMINAL SIZE

NO. NIIN THK INCHES WIDTH INCHES

0261 00-551-8699 2 4 0262 00-167-6856 2 6 0263 00-978-6649 2 8 0264 00-551-8696 2 10 0265 00-551-8695 2 12

TYPICAL USE: Expensive high quality finish lumber for interior trim, door and window trim, cabinets.

GRADE GRADING RULE SPACIES

C Select NELMA All species permitted unless otherwise specified by the ordering C and Btr Select NSLB activity.

Clear RIS C Finish SPIBl *C and Btr Finish WCLIB *A Finish grade Western Cedars acceptable.

C Sel/Choice or WWPA Superior Fin.

MOISTURE CONTENT: 15 percent maximum.

SURFACING: S4S

LENGTH: 4 feet and longer—permitting a maximum of 5% to be furnished in 4 through 7 foot lengths, and requiring a minimum of 50% to be 12 feet and longer.

FED SPEC: MM-L-751H, 13 August 1970.

ITEM NOMINAL SIZE

NO. NIIN THK INCHES WIDTH INCHES

0266 00-551-9651 2 4 0267 00-551-9650 2 6 0268 00-551-9673 2 8 0269 00-551-9672 2 10 0270 00-551-9671 2 12

TYPICAL USE: Highest quality, most expensive finish lumber where very high appearance qualities needed.

(Anticipated end-use should be furnished) Not generally available.

GRADE GRADING RULE SPECIES

Clear All Heart RIS All species permitted unless otherwise specified by the ordering B and B Finish SPIB activity.

*B and Btr Indus WCLIB B and Btr/1 And WWPA *B and Btr Indus Clear grade for Western Cedars acceptable.

2 Clear/Supreme

MOISTURE CONTENT: 15 percent maximum.

LENGTH: 4 feet and longer—permitting a maximum of 5% to be furnished in 4 through 7 foot length, and requiring a minimum of 50% to be 12 feet and longer.

FED SPEC: MM-L-751H, 13 August 1970.

ITEM NOMINAL SIZE

NO. NIIN THK INCHES WIDTH INCHES

0271 00-551-9727 2 4 0272 00-551-9728 2 6 0273 00-551-9729 2 8 0274 00-551-9730 2 10 0275 00-551-9731 2 12

TYPICAL USE: High quality, very expensive finish lumber for high appearance qualities with structural requirements. (Anticipated end-use should be furnished)

GRADE GRADING RULE SPECIES

C Select NELMA All species permitted unless otherwise specified by the ordering C and Btr. Select NSLB activity.

Clear RIS C Finish SPIB C Industrial WCLIB C Select/Choice or WWPA Superior Fin.

MOISTURE CONTENT: 19 percent maximum.

SURFACING: S4S

LENGTH: 4 feet and longer—permitting a maximum of 5% to be furnished in 4 through 7 foot length, and requiring a minimum of 50% to be 12 feet and longer.

FED SPEC: MM-L-751H, 13 August 1970.

ITEM NOMINAL SIZE

NO. NIIN THK INCHES WIDTH INCHES

0276 00-555-9113 3 6 0277 00-555-9114 3 8 0278 00-555-9115 3 10 0279 00-555-9116 4 12 0280 00-555-9117 4 4 0281 00-555-9118 4 6 0282 00-555-9119 4 8 0283 00-555-9120 4 10 0284 00-555-9121 4 12

TYPICAL USE: Stud use including use in load-bearing walls.

NGR GRADE GRADING RULE SPECIES

Stud NELMA All species permitted unless otherwise specified by the ordering NSLB activity.

RIS

SPIB

WCLIB

MOISTURE CONTENT: 19 percent maximum.

LENGTH: 8 feet. NOTE: May he ordered in longer lengths with exception data.

FED SPEC: MM L-751H, 13 August 1970.

ITEM NOMINAL SIZE

NO. NIIN THK INCHES WlDTH INCHES 0285 00-167-6855 2 4

TYPICAL USE: Temporary construction, low grade bracing, crating, and dunnage.

NGR Utility NELlVIA All species permitted unless otherwise specified by the ordering NGR Utility NSLB activity.

Economy RIS Economy SPIB Economy WCLIB Economy WWPA

MOISTURE CONTENT: 19 percent maximum.

SURFACING: Any degree of surfacing permitted.

LENGTH: 4 feet and longer—permitting a maximum of 20% to be furnished in 4 through 9 foot lengths, and requiring a minimum of 20% to be 14 feet and longer.

WIDTH: 4 inches and wider

FED SPEC: MM-L-751H, 13 August 1970.

ITEM NOMINAL

0286 00-272~7753 2

TYPICAL USE: Low cost construction, blocking, concrete forms, crates, and dunnage.

Utility or No. 3 NELMA All species permitted unless otherwise specified by the ordering NSLB activity.

RIS

SPIB

WCLIB

WWPA

MOISTURE CONTENT: 19 percent maximum.

SURFACING: 84S

LENGTH: 6 feet and longer—permitting a maximum of 10% to be furnished in 6 through 9 foot lengths, and requiring a minimum of 40% to be 14 feet and longer.

FED SPEC: MM-L-751H, 13 August 1970.

ITEM NOMINAL SIZE

0287 00-220-6242 2 4

TYPICAL USE: Light framing; ordinary construction, boxes, crates, rafters, studs, etc.

Standard or No. 2 NELMA All species permitted unless otherwise specified by the ordering NSLB activity.

RIS

SPIB

WCLIB

WWPA

MOISTURE CONTENT: 19 percent maximum.

SURFACING: S4S

LENGTH: 6 feet and longer—permitting a maximum of 10% to be furnished in 6 through 9 foot lengths, and requiring a minimum of 40% to be 16 feet.

FED SPEC: MM-L-751H Cancelled and replace by PS-20, 28April 1997.

Random:

ITEM NOMINAL SIZE

NO. NIIN THK INCHES WIDTH INCHES

0288 00-720-0567 2 2 0289 00-220-6192 2 3 0290 00-220-6194 2 4

Specific:

ITEM NOMINAL SIZE

NO. NIIN THK INCHES WIDTH INCHES HEIGHT FEET

0000 01-433-1216 2 4 8 0000 01-433-1221 2 4 10 0000 01-433-1238 2 4 12 0000 01-433-1244 2 4 16

TYPICAL USE: Light framing; high quality construction, boxes, studs, roof trusses, etc.

Construction NELMA All species permitted unless otherwise specified by the ordering or No. 1 NSLB activity.

RIS

SPIB

WCLIB

WWPA

MOISTURE CONTENT: 19 percent maximum.

SURFACING: S4S

LENGTH: 6 feet and longer—permitting a maximum of 10% to be furnished in 6 through 9 foot lengths, and requiring a minimum of 40% to be 14 feet and longer.

FED SPEC: MM-L-751H, 13 August 1970.

ITEM NOMINAL SIZE

NO. NIIN THK INCHES WIDTH INCHES

0291 00-220-6144 2 3

0292 00-220-6146 2 4

TYPICAL USE: Low cost construction, blocking, concrete forms, crates, dunnage.

No. 3 NELMA All species permitted unless otherwise specified by the ordering NSLB activity.

RIS

SPIB

WCLIB

WWPA

MOISTURE CONTENT: 19 percent maximum.

SURFACING: S4S

LENGTH: 6 feet and longer—permitting a maximum of 10% to be furnished in 6 through 9 foot lengths, and requiring a minimum of 40% to be 14 feet and longer.

FED SPEC: MM-L-751H, 13 August 1970.

ITEM NOMINAL SIZE

NO. NIIN THK INCHES WIDTH INCHES

0293 00-220-6244 2 6 0294 00-220-6246 2 8 0295 00-220-6248 2 10 0296 00-220-6250 2 12

TYPICAL USE: High quality construction, boxes, rafters, decking, stringers, etc.

No. 1 NELMA All species permitted unless otherwise specified by the ordering NSLB activity.

RIS

SPIB

WCLIB

WWPA

MOISTURE CONTENT: 19 percent maximum.

SURFACING: S48

LENGTH: 6 feet and longer—permitting a maximum of 10% to be furnished in 6 through 9 foot lengths, and requiring a minimum of 40% to be 14 foot and longer.

FED SPEC: MM-L-751H, canceled 28 April 1997 and replaced by PS-20.

ITEM NOMINAL SIZE

NO. NIIN THK INCHES WIDTH INCHES

0297 00-220-6148 2 6 0298 00-220-6150 2 8 0299 00-220-6152 2 10 0300 00-220-6154 2 12

TYPICAL USE: Structural light framing and joists and planks for highest quality construction.

Select Struc. NELMA All species permitted unless otherwise specified by the ordering NSLB activity.

RIS

SPIB

WCLIB

WWPA

MOISTURE CONTENT: 19 percent maximum.

SURFACING: S4S

LENGTH: 6 feet and longer—permitting a maximum of 10% to be furnished in 6 through 9 foot lengths, and requiring a minimum of 40% to be 14 feet and longer.

FED SPEC: MM-L-751H, 13 August 1970.

ITEM NOMINAL SIZE

NO. NIIN THK INCHES WIDTH INCHES

0301 00-551-9669 2 12 0302 00-551-9670 2 6 0303 00-551-9667 2 8 0304 00-551-9668 2 10 0305 00-551-9666 2 12

TYPICAL USE: Low cost construction, blocking, concrete forms, crates, dunnage.

Utility or No. 3 NELMA All species permitted unless otherwise specified by the ordering NSLB activity.

RIS

SPIB

WCLIB

WWPA

MOISTURE CONTENT: Any stage of seasoning.

SURFACING: Any degree of surfacing permitted.

LENGTH: 8 feet and longer—permitting a maximum of 5% to be furnished in 8 and 9 foot lengths, and requiring a minimum of 50% to be 14 feet and longer.

FED SPEC: MM-L-751H, canceled 28 April 1997 and replaced by PS-20

ITEM NOMINAL SIZE

0306 00-220-6274 4 4

TYPICAL USE: General construction, boxes, crates, dunnage, blocking.

Standard or No. 2 NELMA All species permitted unless otherwise specified by the ordering NSLB activity.

RIS

SPIB

WCLIB

WWPA

MOISTURE CONTENT: 19%

SURFACING: S4S

LENGTH: 8 feet and longer—permitting a maximum of 5% to be furnished in 8 and 9 fooot lengths, and requiring a minimum of 50% to be 14 feet and longer.

FED SPEC: MM-L-751H, canceled 28 April 1997 and replaced by PS-20.

Random:

ITEM NOMINAL SIZE

NO. NIIN THK INCHES WIDTH INCHES

0307 00-555-9105 3 3 0308 00-220-6214 3 4 0309 00-220-6226 4 4

Specific:

ITEM NOMINAL SIZE

NO. NIIN THK INCHES WIDTH INCHES HEIGHT FEET

0000 01-433-4200 4 4 8 0000 01-433-4208 4 4 10 0000 01-433-4215 4 4 12 0000 01-433-4221 4 4 16

TYPICAL USE: Ordinary construction, boxes, crates, rafters, blocking, etc.

No. 2 NELMA All species permitted unless otherwise specified by the ordering NSLB activity.

RIS

SPIB

WCLIB

WWPA

MOISTURE CONTENT: 19 percent maximum.

SURFACING: S4S

LENGTH: 6 feet and longer—permitting a maximum of 10$ to be furnished in 6 through 9 foot lengths, and requiring a minimum of 40% to be 14 feet and longer.

FED SPEC: MM-L-751H, canceled 28 April 1997 and replaced by PS-20.

Random:

ITEM NOMINAL SIZE

NO. NIIN THK INCHES WIDTH INCHES

0310 00-220-6196 2 6 0311 00-220-6198 2 8 0312 00-220-6200 2 I0 0313 00-220-6202 2 12

Specific:

ITEM NOMINAL SIZE

NO. NIIN THK INCHES WIDTH INCHES HEIGHT FEET

0000 01-433-1317 2 6 8

0000 01-433-1322 2 6 10 0000 01-433-1365 2 6 12 0000 01-433-4269 2 6 14 0000 01-433-1371 2 6 16 0000 01-433-4270 2 8 12 0000 01-433-1377 2 8 16 0000 01-433-4275 2 10 10 0000 01-433-4277 2 10 12 0000 01-433-4331 2 10 14 0000 01-433-1510 2 10 16 0000 01-433-1511 2 12 8 0000 01-433-3871 2 12 10 0000 01-433-3906 2 12 12 0000 01-433-8573 2 12 14 0000 01-433-3930 2 12 16

TYPICAL USE: Subflooring, decking, heavy sheathing.

No. 2 NELMA All species permitted unless otherwise specified by the ordering NSLB activity.

RIS

SPIB

WCLIB

WWPA

MOISTURE CONTENT: 19 percent maximum.

SURFACING: S2S and CM

LENGTH: 6 feet and longer—permitting a maximum of 5% to be furnished in 6 through 9 foot lengths, and requiring a minimum of 40% to be 14 feet and longer.

FED SPEC: MM-L-751H, canceled 28 April 1997 and replaced by PS-20.

ITEM NOMINAL SIZE

NO. NI1N THK INCHES WIDTH INCHES

0314 00-132-7108 2 6

TYPICAL USE: High quality construction and industrial uses.

Construction or No. 1 NELMA All species permitted unless otherwise specified by the ordering NSLB activity.

RIS

SPIB

WCLIB

WWPA

MOISTURE CONTENT: 19%

SURFACING: S4S

LENGTH: 8 feet and longer, to be specified by the ordering activity.

FED SPEC: MM-L-751H, canceled 28 April 1997 and replaced by PS-20.

Random:

NOMINAL SIZE

NO. NIIN THK INCHES WIDTH INCHES

0315 00-220-6166 3 4 0316 00-220-6178 4 4

Specific:

NOMINAL SIZE

NO. NIIN THK INCHES WIDTH INCHES HEIGHT FEET

0000 01-433-8661 4 4 8 0000 01-433-8663 4 4 10 0000 01-433-8674 4 4 16

TYPICAL USE: Low cost construction, boxes, crates, dunnage, blocking.

No. 3 NELMA All species permitted unless otherwise specified by the ordering NSLB activity.

RIS

SPIB

WCLIB

WWPA

MOISTURE CONTENT: Maximum 19%

SURFACING: Any degree of surfacing permitted.

LENGTH: 8 feet and longer—permitting a maximum of 5% to be furnished in 8 and 9 foot lengths, and requiring a minimum of 505% to be 14 feet and longer.

FED SPEC: MM-L-751H, canceled 28 April 1997 and replaced by PS-20.

ITEM NOMINAL SIZE

NO. NIIN THK INCHES WIDTH INCHES

0317 00-167-6857 4 6 0318 00-167-6858 4 8 0319 00-167-6859 4 10 0320 00-167-6860 4 12

TYPICAL USE: General construction, skids, heavy crating.

No.2 NELMA All species permitted unless otherwise specified by the ordering NSLB activity.

RIS

SPIB

WCLLIB

WWPA

MOISTURE CONTENT: Any stage of seasoning.

SURFACING: S4S

LENGTH: 8 feet and longer—permitting a maximum of 5% to be furnished in 8 and 9 foot length and requiring a minimum of 50% to be 14 feet and longer.

FED SPEC MM-L-751H, canceled 28 April 1997 and replaced by PS-20.

ITEM NOMINAL SIZE

NO. NIIN THK INCHES WIDTH INCHES

0321 00-220-6216 3 6 0322 00-220-6218 3 8 0323 00-220-6220 3 10 0324 00-220-6222 3 12 0325 00-220-6228 4 6 0326 00-220-6230 4 8 0327 00-220-6232 4 10 0328 00-220-6234 4 12

Specific:

ITEM NOMINAL SIZE

NO. NIIN THK INCHES WIDTH INCHES HEIGHT FEET

0000 01-433-4231 4 6 8 0000 01-477-3335 4 6 9 0000 01-433-4237 4 6 10 0000 01-433-4239 4 6 12 0000 01-433-4245 4 6 16 0000 01-477-3285 4 10 14

TYPICAL USE: High quality construction and industrial uses, heavy flaming, decking.

No. 1 NELMA All species permitted unless otherwise specified by the ordering NSLB activity.

RIS

SPIB

WCLIB

WWPA

MOISTURE CONTENT: Any stage of seasoning.

SURFACING: S4S

LENGTH: 8 feet and longer—permitting a maximum of 5% to be furnished in 8 and 9 foot lengths, and requiring a minimum of 50% to be 14 feet and longer.

FED SPEC: MM-L-751H, canceled 28 April 1997 and replaced by PS-20.

ITEM NOMINAL SIZE

NO. NIIN THK INCHES WIDTH INCHES

0329 00-220-6168 3 6 0330 00-220-6170 3 8 0331 00-220-6172 3 10 0332 00-220-6174 3 12 0333 00-220-6180 4 6 0334 00-220-6182 4 8 0335 00-220-6184 4 10 0336 00-220-6186 4 12 0337 00~274-5296 3 14

TYPICAL USE: Highest quality construction where good appearance and high strength are necessary.

Select Struc. NELMA All species permitted unless otherwise specified by the ordering NSLB activity.

RIS

SPIB

WCLIB

WWPA

MOISTURE CONTENT: Any stage of seasoning.

SURFACING: Rough

LENGTH: 8 feet and longer—permitting a maximum of 5% to be furnished in 8 and 9 foot lengths and requiring a minimum of 50% to be 14 feet and longer.

FED SPEC: MM-L-751H, canceled 28 April 1997 and replaced by PS-20.

ITEM NOMINAL SIZE

NO. NIIN THK INCHES WIDTH INCHES

0338 00-551-9664 3 4 0339 00-551-9663 3 6 0340 00-551-9662 3 8 0341 00-551-9661 3 10 0342 00-551-9660 3 12 0343 00-551-9659 4 4 0344 00-551-9658 4 6 0345 00-551-9657 4 8 0346 00-551-9716 4 10 0347 00-551-9717 4 12

TYPICAL USE: Tank (container) and boat construction.

Tank Stock RIS Redwood Under Four Inch WCLIB Douglas-Fir, Western Red Cedar Tank Stock

SURFACING: S4S

LENGTH: 8 feet and longer—permitting a maximum of 10% to be furnished in 8 foot lengths and requiring a minimum of 40% to be 14 feet land longer.

WIDTH: 6 inches and wider

FED SPEC: MM-L-751H, canceled 28 April 1997 and replaced by PS-20.

ITEM NET SURFACED

NO. NIIN THK INCHES MOISTURE CONTENT

0348 00-197-3004 2 15 Percent

TYPICAL USE: CEDAR planking for boats and ships.

LENGTH: 12 feet and longer—requiring a minimum of 50% to be 16 feet or longer.

WIDTH: 6 inches and wider—requiring a minimum of 60% to be 8 inches and wider, of which 15% must be 10 inches and wider.

MIL SPEC: Shall conform to Type I, Grade B; of MIL-L-2594D, 14 March 1988. (Port Orford or Alaska yellow cedar only.)

ITEM

NO. NIIN NOMINAL THK (INCHES)

0349 00-2204716 2

LATH, WOOD

TYPICAL USE: Lath ground work for plastering.

UNIT OF ISSUE: Bundle (50 pieces per BD)

MOISTURE CONTENT: Any stage of seasoning.

THICKNESS: 3/8 inch.

WIDTH: 1-1/4 to 1-5/8 inch.

LENGTH: 4 feet.

GRADE GRADING RULE SPECIES

Lath Grade RIS All species permitted unless otherwise specified by the ordering No. 2 Lath SPIB activity.

No. 2 Lath WCLIB No. 2 Lath WWPA

ITEM

NO. NIIN

0350 00-183-8173

Lath Grade RIS All species permitted unless otherwise specified by the ordering No. 1 Lath SPIB activity.

No. 1 Lath WCLIB No. 1 Lath WWPA

ITEM

NO. NI1N

0351 00-132-8148

LUMBER, SOFTWOOD, DECKING

TYPICAL USE: Decking and manufacture of laminated ship decking.

GRADE GRADING RULE SPECIES

C Ship Decking WCLIB Douglas-Fir All material shall be V.G. all sound Ship Decking WCLIB Douglas-Fir heartwood. No cutouts are permitted.

C and Btr VG Fin. WCLIB Douglas-Fir (V.G. = Vertical Grain)

SLOPE OF GRAIN: Not to exceed 1 in 12

MOISTURE CONTENT: 15 percent maximum

SURFACING: Rough

LENGTH: 16 feet and longer,--requiring a minimum of 50% to be 20 feet or longer.

FED SPEC: MM-L-751H, 13 August 1970

ITEM FULL SAWN SIZE (INCHES)

NO. NIIN THK WIDTH

0352 00-551-5191 1 5

NOTE: "DENSE" decking must be specified when ordering.

TYPICAL USE: Decking and planking for ships and barges.

Ship Decking WCLIB Douglas-Fir "DENSE" decking must be specified when ordering.

MOISTURE CONTENT: 19% maximum

SURF…