LTC PID Packaging Consolidated Text.docx

48 KB Posted

Attached to
CL24218003
Solicitation number
SPE7LX25R0080
Issued by

About this file

Written by GovTribe AI ·

This document is a detailed packaging and procurement file for a Defense Logistics Agency (DLA) Long-Term Contract (LTC) for critical gun parts and weapon system components. The solicitation covers thirteen (13) National Stock Numbers (NSNs) including items such as shafts, levers, control assemblies, pumps, carriages, slides, triggers, ammunition feeders, leg sections, and locks, with a maximum contract value of $3,052,882.31 over five years. The procurement is a total small business set-aside using full and open competition, structured as a firm fixed-price, indefinite delivery indefinite quantity (IDIQ) contract with a base three-year period and two one-year option periods.

The solicitation involves complex technical requirements, including strict packaging specifications, export control regulations, and quality control measures. Each item is classified as a "defense article" subject to International Traffic in Arms Regulations, requiring manufacturers to register with the Directorate of Defense Trade Controls. Vendors must meet extensive technical documentation requirements, including potential Product Verification Testing, qualified products list compliance, and specific manufacturing process certifications. The DLA Weapons Support division in Columbus, Ohio will manage the procurement, with the solicitation expected to be available on http://www.dibbs.bsm.dla.mil/ on or about 1/30/2026, and interested parties have 15 days from the notice to identify their capabilities to satisfy the government's requirements.

View the file

Other files

File Type Posted
Consolidation Memo CL24218003 Redact_Redacted.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

*** LTC PID Packaging Consolidated Text *** PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION

AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.

NSN:004350864

SHAFT, SHOULDERED.

[SHAFT, INPUT]

REFERENCE NUMBER:CA070

REFERENCE NUMBER:CRE01

REFERENCE NUMBER:CS187

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RD002

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RQ032

REFERENCE NUMBER:RT001

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 98752 C5A27970

REVISION NR P DTD 04/23/2015

PART PIECE NUMBER: C5A27970

IAW REFERENCE DRAWING NR 98752 200415485

REVISION NR E DTD 01/30/2020

PART PIECE NUMBER:

IAW REFERENCE QAP 16236 SQAP004350864

REVISION NR DTD 12/09/2021

PART PIECE NUMBER:

PREP FOR DELIVERY

LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA-QUP:001

WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.

NSN:005564278

LEVER, LOCK-RELEASE

REFERENCE NUMBER:RA001

THIS ITEM IS A "DEFENSE ARTICLE" AS DEFINED IN

AND SUBJECT TO THE INTERNATIONAL TRAFFIC IN ARMS

REGULATIONS (22 C.F.R. 120-30) AND THE ARMS

EXPORT CONTROL ACT (22 U.S.C.A. 2778-2799).

ANY MANUFACTURER OR EXPORTER OF DEFENSE ARTICLES

IS REQUIRED TO REGISTER WITH THE DIRECTORATE OF

DEFENSE TRADE CONTROLS (DDTC), DEPARTMENT OF

STATE. DOCUMENTARY EVIDENCE OF REGISTRATION MAY

BE REQUIRED PRIOR TO AWARD. ADDITIONAL EXPORT

RESTRICTIONS APPLY AS INDICATED HEREIN. FAILURE

TO SUBMIT DDTC REGISTRATION WHEN REQUESTED WILL

MAKE A QUOTE/OFFER INELIGIBLE FOR AWARD.

_______________EXCEPTION DATA____________________

IF DRAWING NOTE GIVES OPTION FOR ZINC OR

MANGANESE COATING THEN MANGANESE IS REQUIRED.

______________END OF EXCEPTIONS__________________

__________SPECIAL PACKAGING INSTRUCTIONS_________

______END OF SPECIAL PACKAGING INSTRUCTIONS______

THE ITEM BEING PROCURED IS A CRITICAL GUN PART

ITEM WITH UNIQUE REQUIREMENTS.

CONTRACTOR FAT APPLIES.

AFTER RECEIPT OF QUOTES, OFFERORS MAY BE

CONTACTED TO PRICE THE FAT REQUIREMENT.

PROCESS PROCEDURES AND OR WORKMANSHIP SPECIMENS

REQUIRED BY MILITARY SPECIFICATION (S) APPLICABLE

TO THIS CONTRACT WILL BE APPROVED BY THE CONTRACT

POST AWARD CONTRACTING OFFICER (PCO).

PRODUCT INSPECTION WILL BE CONDUCTED BY THE DCMA

QAR AT THE ACTUAL MANUFACTURER'S FACILITY.

THE IDENTIFICATION OF THE ACTUAL

MANUFACTURER AND PHOSPHATE CONTRACTOR MUST BE

SUBMITTED TO THE CONTRACTING OFFICER FOR

INCLUSION IN THE AWARD. UPON AWARD, ANY CHANGES

TO THE ABOVE MUST BE APPROVED BY THE PCO VIA

FORMAL CONTRACT MODIFICATION.

PRODUCT VERIFICATION TESTING (PVT) IN ACCORDANCE

WITH PROCUREMENT NOTE E05, MAY BE INVOKED FOR THE

REFERENCED CONTRACT. IF INVOKED, PVT SAMPLES MUST

BE INSPECTED, PACKAGED AND MARKED AS REQUIRED IN

THE CONTRACT. ONE (1) SAMPLE MAY BE DESTROYED

DURING TESTING.

PRODUCT VERIFICATION TESTING, IF INVOKED<(>,<)>

WILL BE PERFORMED PRIOR TO ACCEPTANCE OF

EACH SHIPMENT. THE CONTRACTOR MUST PROVIDE

PVT SAMPLES FROM EACH (SUB)CONTRACTOR USED

IN THE PRODUCTION OF PARTS ON THIS CONTRACT.

FIVE (5) PVT SAMPLES, UNLESS OTHERWISE

SPECIFIED, WILL BE REQUIRED TO BE IDENTIFIED

TO THOSE (SUB)CONTRACTORS WHEN THEY ARE SENT

IN FOR TESTING.

CERTIFICATE OF CONFORMANCE IS NOT AUTHORIZED.

REFERENCE NUMBER:RD001

REFERENCE NUMBER:RD002

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RQ016

REFERENCE NUMBER:RT001

REFERENCE NUMBER:CS187

REFERENCE NUMBER:ZD004

REFERENCE NUMBER:ZD025

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:ZL006

REFERENCE NUMBER:RQ032

REFERENCE NUMBER:ES371

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 19205 5564278

REVISION NR AB DTD 05/05/2018

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12579607

REVISION NR C DTD 08/04/2009

PART PIECE NUMBER:

IAW REFERENCE SPEC NR MIL-DTL-16232H(1)

REVISION NR 1 DTD 03/26/2021

PART PIECE NUMBER:

IAW REFERENCE UNK DI-NDTI-80809B NOT 3

REVISION NR B DTD 09/24/2024

PART PIECE NUMBER:

IAW REFERENCE UNK QPL-3150-34 NOT 1

REVISION NR 34 DTD 03/15/2007

PART PIECE NUMBER:

IAW REFERENCE UNK QPL-16173-84 NOT 1

REVISION NR 84 DTD 10/29/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 5564278

REVISION NR DTD 07/26/2023

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19205 5564278

REVISION NR AA DTD 05/15/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12993884

REVISION NR K DTD 04/23/2020

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19205 5564278

REVISION NR H DTD 06/30/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 13027484

REVISION NR C DTD 03/31/2020

LINE ITEM 00002 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:D3 OPI:A

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

Packaging shall be in accordance with Special Packaging Instruction - SPI - 5564278, Revision H, dated 30 June 2015.

NSN:008949563

PUMP, FUEL TRANSFER.

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RD002

REFERENCE NUMBER:CS187

REFERENCE NUMBER:CS147

REFERENCE NUMBER:CA070

REFERENCE NUMBER:RQ016

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:RT001

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 19207 10885483

REVISION NR M DTD 06/01/2023

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12369004

REVISION NR G DTD 05/14/2007

PART PIECE NUMBER:

IAW REFERENCE SPEC NR MIL-PRF-16173E(2)

REVISION NR 2 DTD 10/19/2017

PART PIECE NUMBER:

IAW REFERENCE SPEC NR MIL-PRF-21260E NOT 1

REVISION NR E DTD 11/17/2008

PART PIECE NUMBER:

IAW REFERENCE SPEC NR MIL-PRF-22750G(1) NOT 1

REVISION NR 1 DTD 01/31/2019

PART PIECE NUMBER:

IAW REFERENCE SPEC NR MIL-DTL-53030D(1) NOT 2

REVISION NR 1 DTD 11/02/2022

PART PIECE NUMBER:

IAW REFERENCE SPEC NR MIL-DTL-83133L

REVISION NR L DTD 08/02/2024

PART PIECE NUMBER:

IAW REFERENCE UNK TT-C-490J

REVISION NR J DTD 09/06/2024

PART PIECE NUMBER:

IAW REFERENCE UNK QPL-16173-84 NOT 1

REVISION NR 84 DTD 10/29/2008

PART PIECE NUMBER:

IAW REFERENCE UNK QPL-21260-30 NOT 1

REVISION NR 30 DTD 09/24/2008

PART PIECE NUMBER:

IAW REFERENCE UNK QPL-22750-6 NOT 1

REVISION NR 6 DTD 09/27/2007

PART PIECE NUMBER:

IAW REFERENCE UNK QPL-53022-14 NOT 1

REVISION NR 14 DTD 01/25/2008

PART PIECE NUMBER:

IAW REFERENCE UNK QPL-53030-7 NOT 1

REVISION NR 7 DTD 02/07/2008

PART PIECE NUMBER:

IAW REFERENCE UNK QPL-53084-6 NOT 1

REVISION NR 6 DTD 06/16/2008

PART PIECE NUMBER:

IAW REFERENCE SPEC NR MIL-DTL-53022F(1)

REVISION NR 1 DTD 04/15/2021

PART PIECE NUMBER:

IAW REFERENCE SPEC NR MIL-DTL-53084C

REVISION NR C DTD 09/18/2023

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 10885483

REVISION NR DTD 08/16/2024

PART PIECE NUMBER:

IAW REFERENCE QAP 16236 SQAPCARCLTPHOS81361

REVISION NR DTD 12/01/2017

PART PIECE NUMBER:

IAW REFERENCE QAP 16236 CDRL-81361CARPH-17272

REVISION NR DTD 12/01/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 10885483

REVISION NR DTD 04/13/2022

LINE ITEM 00003 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:A

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PRESERVATION, PACKAGING, AND PACKING SHALL BE IN

ACCORDANCE WITH SPECIAL PACKAGING INSTRUCTION

(SPI) AK08949563, REVISION , DATED 04-13-2022

REFERENCE NUMBER:CS253 OBJECT TEXT ID ST

REFERENCE NUMBER:IP025 OBJECT TEXT ID ST LANGUAGE E

NSN:011236074

SLIDE,FEED,INNER

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RD001

REFERENCE NUMBER:RD002

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RQ016

REFERENCE NUMBER:RQ032

REFERENCE NUMBER:RQ042

REFERENCE NUMBER:RT001

REFERENCE NUMBER:ZL006

REFERENCE NUMBER:CS187

REFERENCE NUMBER:ES371

REFERENCE NUMBER:ZD003

REFERENCE NUMBER:ZL006

THIS ITEM IS A "DEFENSE ARTICLE" AS DEFINED IN

AND SUBJECT TO THE INTERNATIONAL TRAFFIC IN ARMS

REGULATIONS (22 C.F.R. 120-30) AND THE ARMS

EXPORT CONTROL ACT (22 U.S.C.A. 2778-2799).

ANY MANUFACTURER OR EXPORTER OF DEFENSE ARTICLES

IS REQUIRED TO REGISTER WITH THE DIRECTORATE OF

DEFENSE TRADE CONTROLS (DDTC), DEPARTMENT OF

STATE. DOCUMENTARY EVIDENCE OF REGISTRATION MAY

BE REQUIRED PRIOR TO AWARD. ADDITIONAL EXPORT

RESTRICTIONS APPLY AS INDICATED HEREIN. FAILURE

TO SUBMIT DDTC REGISTRATION WHEN REQUESTED WILL

MAKE A QUOTE/OFFER INELIGIBLE FOR AWARD.

_______________EXCEPTION DATA____________________

IF DRAWING NOTE GIVES OPTION FOR ZINC OR MANGANESE

COATING THEN MANGANESE IS REQUIRED.

ADD SPI AM3269430 REVISION 'E' TO THE TDP.

ADD VCI BAG DRAWING 13027484 TO THE TDP.

______________END OF EXCEPTIONS__________________

THE ITEM BEING PROCURED IS A CRITICAL GUN PART

ITEM WITH UNIQUE REQUIREMENTS.

CONTRACTOR FAT APPLIES.

AFTER RECEIPT OF QUOTES, OFFERORS MAY BE

CONTACTED TO PRICE THE FAT REQUIREMENT.

PROCESS PROCEDURES AND OR WORKMANSHIP SPECIMENS

REQUIRED BY MILITARY SPECIFICATION (S) APPLICABLE

TO THIS CONTRACT WILL BE APPROVED BY THE CONTRACT

POST AWARD CONTRACTING OFFICER (PCO).

PRODUCT INSPECTION WILL BE CONDUCTED BY THE DCMA

QAR AT THE ACTUAL MANUFACTURER'S FACILITY.

THE IDENTIFICATION OF THE ACTUAL

MANUFACTURER AND PHOSPHATE CONTRACTOR MUST BE

SUBMITTED TO THE CONTRACTING OFFICER FOR

INCLUSION IN THE AWARD. UPON AWARD, ANY CHANGES

TO THE ABOVE MUST BE APPROVED BY THE PCO VIA

FORMAL CONTRACT MODIFICATION.

PRODUCT VERIFICATION TESTING (PVT) IN ACCORDANCE

WITH PROCUREMENT NOTE E05, MAY BE INVOKED FOR THE

REFERENCED CONTRACT. IF INVOKED, PVT SAMPLES MUST BE

INSPECTED, PACKAGED AND MARKED AS REQUIRED IN THE

CONTRACT. ONE (1) SAMPLE MAY BE DESTROYED DURING

TESTING.

THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH

MUST MEET QPL/QML SPECIFICATIONS AS IDENTIFIED IN

THE TECHNICAL DATA PACKAGE. (FAR CLAUSE 52.209-1)

QUALIFICATION REQUIREMENTS IS APPLICABLE. THE

AWARDEE SHALL PROVIDE QPL/QML COMPONENTS ONLY FROM

SOURCES QUALIFIED ON THE APPLICABLE QPL(S)/QML(S).

THE IDENTIFICATION OF ALL APPLICABLE QPL/QML SOURCES

MUST BE SUBMITTED TO THE CONTRACTING OFFICER FOR

EVALUATION PRIOR TO CONTRACT AWARD.

PRODUCT VERIFICATION TESTING, IF INVOKED,

WILL BE PERFORMED PRIOR TO ACCEPTANCE OF

EACH SHIPMENT. THE CONTRACTOR MUST PROVIDE

PVT SAMPLES FROM EACH (SUB)CONTRACTOR USED

IN THE PRODUCTION OF PARTS ON THIS CONTRACT.

FIVE (5) PVT SAMPLES, UNLESS OTHERWISE

SPECIFIED, WILL BE REQUIRED TO BE IDENTIFIED

TO THOSE (SUB)CONTRACTORS WHEN THEY ARE SENT

IN FOR TESTING.

CERTIFICATE OF CONFORMANCE IS NOT AUTHORIZED.

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 10001 3269430

REVISION NR J DTD 08/12/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12579607

REVISION NR C DTD 08/04/2009

PART PIECE NUMBER:

IAW REFERENCE UNK QPL-3150-34 NOT 1

REVISION NR 34 DTD 03/15/2007

PART PIECE NUMBER:

IAW REFERENCE UNK QPL-16173-84 NOT 1

REVISION NR 84 DTD 10/29/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12993884

REVISION NR K DTD 04/23/2020

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 10001 3269430

REVISION NR J DTD 08/12/2013

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 13027484

REVISION NR C DTD 03/31/2020

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 10001 3269430

REVISION NR E DTD 03/09/2020

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 3269430

REVISION NR DTD 03/03/2020

LINE ITEM 00004 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C

UNIT CONT:D3 OPI:A

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PACKAGE IAW SPI AM3269430 REV E DATED MAR 20 2020

CONTRACT C CHANGES: VCI BAG DRAWING 13027484 ADDED TO THE TDP.

NSN:011285468

SLIDE,PISTOL

REFERENCE NUMBER:RA001

REFERENCE NUMBER:ZL006

THIS ITEM IS A "DEFENSE ARTICLE" AS DEFINED IN

AND SUBJECT TO THE INTERNATIONAL TRAFFIC IN ARMS

REGULATIONS (22 C.F.R. 120-30) AND THE ARMS

EXPORT CONTROL ACT (22 U.S.C.A. 2778-2799).

ANY MANUFACTURER OR EXPORTER OF DEFENSE ARTICLES

IS REQUIRED TO REGISTER WITH THE DIRECTORATE OF

DEFENSE TRADE CONTROLS (DDTC), DEPARTMENT OF

STATE. DOCUMENTARY EVIDENCE OF REGISTRATION MAY

BE REQUIRED PRIOR TO AWARD. ADDITIONAL EXPORT

RESTRICTIONS APPLY AS INDICATED HEREIN. FAILURE

TO SUBMIT DDTC REGISTRATION WHEN REQUESTED WILL

MAKE A QUOTE/OFFER INELIGIBLE FOR AWARD.

_______________EXCEPTION DATA____________________

IF DRAWING NOTE GIVES OPTION FOR ZINC OR

MANGANESE COATING THEN MANGANESE IS REQUIRED.

DR 9348392:

THE REVISIONS OF THE SPECIFICATIONS LISTED IN NOTE 1 REGARDING DRAWING

INTERPRETATION ARE REQUIRED TO PROPERLY INTERPRET THE DRAWING

REQUIREMENTS. THE USE OF OTHER OR MORE CURRENT REVISIONS FOR THESE IS

NOT AUTHORIZED.

IN TDPL 9348392:

IN SPECIFICATIONS AND STANDARDS:

DOCUMENT: DELETE: SUBSTITUTE/ADD:

MIL-DTL-13924 X - - -

MIL-DTL-53072 X - - -

ASTM-B633 X - - -

ASTM-E1444/E1444 M X - - -

SAE-AMS-QQ-P-416 X - - -

SAE-AMS2175 X - - -

SAE-AMS2460 X - - -

______________END OF EXCEPTIONS__________________

THE ITEM BEING PROCURED IS A CRITICAL GUN PART

ITEM WITH UNIQUE REQUIREMENTS.

CONTRACTOR FAT APPLIES.

AFTER RECEIPT OF QUOTES, OFFERORS MAY BE

CONTACTED TO PRICE THE FAT REQUIREMENT.

PROCESS PROCEDURES AND OR WORKMANSHIP SPECIMENS

REQUIRED BY MILITARY SPECIFICATION (S) APPLICABLE

TO THIS CONTRACT WILL BE APPROVED BY THE CONTRACT

POST AWARD CONTRACTING OFFICER (PCO).

PRODUCT INSPECTION WILL BE CONDUCTED BY THE DCMA

QAR AT THE ACTUAL MANUFACTURER'S FACILITY.

THE IDENTIFICATION OF THE ACTUAL

MANUFACTURER AND PHOSPHATE CONTRACTOR MUST BE

SUBMITTED TO THE CONTRACTING OFFICER FOR

INCLUSION IN THE AWARD. UPON AWARD, ANY CHANGES

TO THE ABOVE MUST BE APPROVED BY THE PCO VIA

FORMAL CONTRACT MODIFICATION.

PRODUCT VERIFICATION TESTING (PVT) IN ACCORDANCE

WITH PROCUREMENT NOTE E05, MAY BE INVOKED FOR THE

REFERENCED CONTRACT. IF INVOKED, PVT SAMPLES MUST BE

INSPECTED, PACKAGED AND MARKED AS REQUIRED IN THE

CONTRACT. ONE (1) SAMPLE MAY BE DESTROYED DURING

TESTING.

THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH

MUST MEET QPL/QML SPECIFICATIONS AS IDENTIFIED IN

THE TECHNICAL DATA PACKAGE. (FAR CLAUSE 52.209-1)

QUALIFICATION REQUIREMENTS IS APPLICABLE. THE

AWARDEE SHALL PROVIDE QPL/QML COMPONENTS ONLY FROM

SOURCES QUALIFIED ON THE APPLICABLE QPL(S)/QML(S).

THE IDENTIFICATION OF ALL APPLICABLE QPL/QML SOURCES

MUST BE SUBMITTED TO THE CONTRACTING OFFICER FOR

EVALUATION PRIOR TO CONTRACT AWARD.

PRODUCT VERIFICATION TESTING, IF INVOKED<(>,<)>

WILL BE PERFORMED PRIOR TO ACCEPTANCE OF

EACH SHIPMENT. THE CONTRACTOR MUST PROVIDE

PVT SAMPLES FROM EACH (SUB)CONTRACTOR USED

IN THE PRODUCTION OF PARTS ON THIS CONTRACT.

FIVE (5) PVT SAMPLES, UNLESS OTHERWISE

SPECIFIED, WILL BE REQUIRED TO BE IDENTIFIED

TO THOSE (SUB)CONTRACTORS WHEN THEY ARE SENT

IN FOR TESTING.

CERTIFICATE OF CONFORMANCE IS NOT AUTHORIZED.

REFERENCE NUMBER:RD001

REFERENCE NUMBER:RD002

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RQ016

REFERENCE NUMBER:RT001

REFERENCE NUMBER:CS187

REFERENCE NUMBER:ZL006

REFERENCE NUMBER:RQ032

REFERENCE NUMBER:ZDL45

REFERENCE NUMBER:ES371

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 19200 9348392

REVISION NR H DTD 06/27/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12579607

REVISION NR C DTD 08/04/2009

PART PIECE NUMBER:

IAW REFERENCE QAP 19200 12993884

REVISION NR K DTD 04/23/2020

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12993884

REVISION NR K DTD 04/23/2020

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 9348392

REVISION NR DTD 11/10/2022

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 9348392

REVISION NR B DTD 11/15/2022

LINE ITEM 00005 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:D3 OPI:A

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

Packaging shall be in accordance with Special Packaging Instruction - (AM) P9348392, Revision B, dated 15NOV2022, with changes;

SEE SECTION C FOR CHANGES/UPDATES TO SPI.

REFERENCE NUMBER:ZD079 OBJECT TEXT ID ST

NSN:012460948

CONTROL ASSEMBLY, PUSH-PULL.

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ042

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ001

APPROVED VARIANCES DRAWING 12349737: 2.06 ILO 1.94 1.38 ILO 1.3 .260 ILO

.250 .390-.410 LOCAL SHOULDER HEX STAKED .355-.365 ACROSS FLATS

.385-.395 ACROSS POINTS ILO .375 INCHES. CFAT IAW w/ QAP & Drawing 12349737

REFERENCE NUMBER:CA070

REFERENCE NUMBER:CS187

#At this time we are not able to assist. Currently selective data is unavailable for download. We are aware of this issue. A resolution date is unavailable at this time. I apologize for the inconvenience.#

REFERENCE NUMBER:CQ044

IAW BASIC DRAWING NR 19207 12349737

REVISION NR E DTD 04/23/2020

PART PIECE NUMBER:

IAW REFERENCE QAP 19207 12349737

REVISION NR C DTD 09/12/1986

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12349737

REVISION NR DTD 05/06/2024

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12349737

REVISION NR C DTD 08/09/1993

LINE ITEM 00006 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

ZZ SHALL BE IAW SPI AK12460948

M-20, UNIT CONTAINER SHALL BE IAW MIL-DTL -117

NSN:012522820

UPPER CRADLE ASSEMBLY

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RD001

REFERENCE NUMBER:RD002

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RQ016

REFERENCE NUMBER:RQ017

REFERENCE NUMBER:RQ032

REFERENCE NUMBER:RQ036

REFERENCE NUMBER:RS001

REFERENCE NUMBER:RT001

REFERENCE NUMBER:CS187

REFERENCE NUMBER:ES371

REFERENCE NUMBER:ZDL06

REFERENCE NUMBER:ZD080

THIS ITEM IS A "DEFENSE ARTICLE" AS DEFINED IN AND SUBJECT TO THE

INTERNATIONAL TRAFFIC IN ARMS REGULATIONS (22 C.F.R. 120-30) AND THE

ARMS EXPORT CONTROL ACT (22 U.S.C.A. 2778-2799). ANY MANUFACTURER OR

EXPORTER OF DEFENSE ARTICLES IS REQUIRED TO REGISTER WITH THE

DIRECTORATE OF DEFENSE TRADE CONTROLS (DDTC), DEPARTMENT OF STATE.

DOCUMENTARY EVIDENCE OF REGISTRATION MAY BE REQUIRED PRIOR TO AWARD.

ADDITIONAL EXPORT RESTRICTIONS APPLY AS INDICATED HEREIN. FAILURE TO

SUBMIT DDTC REGISTRATION WHEN REQUESTED WILL MAKE A QUOTE/OFFER

INELIGIBLE FOR AWARD.

IF DRAWING NOTE GIVES OPTION FOR ZINC OR MANGANESE COATING THEN

MANGANESE IS REQUIRED.

INTERPRETATION OF DIMENSIONS AND TOLERANCES IS SUBJECT TO THE SPECIFIC

DATED REVISION OF ANSI/ASME Y14 (M) .5 CALLED OUT ON THE DWG.

SPECIAL LICENSE RIGHTS:

THE GOVERNMENTS RIHT TO USE, MODIFY, REPRODUCE, RELEASE, PERFORM,

DISPLAY, OR DISCLOSE SUCH TECHNICAL DATA ARE RESTRICTED BY CONTRACT NO.

DAAA07-77-C-2018. ANY REPRODUCTION OF TECHNICAL DATA OR PORTIONS THEREOF

MARKED WITH THIS LEGEND MUST ALSO REPRODUCE THE MARKINGS.

WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS

RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SECT 2751,

ET SEQ) OR THE EXPORT DISSEMINATE IN ACCORDANCE WITH PROVISIONS OF DOD

DIRECTIVE 5230.25. ADMINISTRATIVE ACT OF 1979, AS AMENDED, TITLE 50

U.S.C, APP. 2401 ET SEQ. VIOLATIONS OF THESE EXPORT LAWS ARE SUBJECT TO

SEVERE CRIMINAL PENALTIES.

______________END OF EXCEPTIONS__________________

__________SPECIAL PACKAGING INSTRUCTIONS_________

PD 12597091:

Block 12: DELETE METHOD 32 AND REPLACE WITH METHOD 33.

DELETE CURRENT PACKAGING STEPS AND REPLACE WITH THE FOLLOWING: 1. AR.

PRESERVATIVE: (SEE NOTE A).

2. AR. WRAP: MIL-PRF-121, TYPE I (SEE NOTE B).

3. AR. TAPE: ASTM D6123/D6123M (SEE NOTE B).

4. 1. BAG: MIL-DTL-117, TYPE II, CLASS C.

5. AR. CUSHIONING: PPP-C-795 OR PPP-C-1797 (SEE NOTE C).

6. 1. BOX: ASTM D5118/D5118M, STYLE RSC, GRADE W5c.

7. AR. CLOSURE: ASTM D1974/D1974M, SEALING METHOD B.

NOTE A: APPLY IN ACCORDAANCE WITH ITEM DRAWING.

NOTE B: FULLY ENCAPSULATE ITEM IN WRAP. SECURE WRAP IN PLACE WITH

SPECIFIED TAPE. DO NOT LET THE TAPE COME INTO CONTACT WITH THE ITEM.

NOTE C: USE SPECIFIED CUSHIONING AS VOID FILL WITHIN THE CONTAINER.

ENSURE SUFFIECIENT MATERIAL IS USED TO IMMBOBILIZE THE ITEM IN THE

CONTAINER.

______END OF SPECIAL PACKAGING INSTRUCTIONS______

CONTRACTOR FAT APPLIES.

AFTER RECEIPT OF QUOTES, OFFERORS MAY BE

CONTACTED TO PRICE THE FAT REQUIREMENT.

PROCESS PROCEDURES AND OR WORKMANSHIP SPECIMENS

REQUIRED BY MILITARY SPECIFICATION (S) APPLICABLE

TO THIS CONTRACT WILL BE APPROVED BY THE CONTRACT

POST AWARD CONTRACTING OFFICER (PCO).

PRODUCT INSPECTION WILL BE CONDUCTED BY THE DCMA

QAR AT THE ACTUAL MANUFACTURER'S FACILITY.

THE IDENTIFICATION OF THE ACTUAL

MANUFACTURER AND PHOSPHATE CONTRACTOR MUST BE

SUBMITTED TO THE CONTRACTING OFFICER FOR

INCLUSION IN THE AWARD. UPON AWARD, ANY CHANGES

TO THE ABOVE MUST BE APPROVED BY THE PCO VIA

FORMAL CONTRACT MODIFICATION.

PRODUCT VERIFICATION TESTING (PVT) IN ACCORDANCE

WITH PROCUREMENT NOTE E05, MAY BE INVOKED FOR THE

REFERENCED CONTRACT. IF INVOKED, PVT SAMPLES MUST BE

INSPECTED, PACKAGED AND MARKED AS REQUIRED IN THE

CONTRACT. ONE (1) SAMPLE MAY BE DESTROYED DURING

TESTING.

THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH

MUST MEET QPL/QML SPECIFICATIONS AS IDENTIFIED IN

THE TECHNICAL DATA PACKAGE. (FAR CLAUSE 52.209-1)

QUALIFICATION REQUIREMENTS IS APPLICABLE. THE

AWARDEE SHALL PROVIDE QPL/QML COMPONENTS ONLY FROM

SOURCES QUALIFIED ON THE APPLICABLE QPL(S)/QML(S).

THE IDENTIFICATION OF ALL APPLICABLE QPL/QML SOURCES

MUST BE SUBMITTED TO THE CONTRACTING OFFICER FOR

EVALUATION PRIOR TO CONTRACT AWARD.

PRODUCT VERIFICATION TESTING, IF INVOKED<(>,<)>

WILL BE PERFORMED PRIOR TO ACCEPTANCE OF

EACH SHIPMENT. THE CONTRACTOR MUST PROVIDE

PVT SAMPLES FROM EACH (SUB)CONTRACTOR USED

IN THE PRODUCTION OF PARTS ON THIS CONTRACT.

FIVE (5) PVT SAMPLES, UNLESS OTHERWISE

SPECIFIED, WILL BE REQUIRED TO BE IDENTIFIED

TO THOSE (SUB)CONTRACTORS WHEN THEY ARE SENT

IN FOR TESTING.

CERTIFICATE OF CONFORMANCE IS NOT AUTHORIZED.

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 19200 12597091

REVISION NR E DTD 08/17/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12579607

REVISION NR C DTD 08/04/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12597094

REVISION NR D DTD 08/17/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12597095

REVISION NR C DTD 08/17/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12597098

REVISION NR F DTD 08/17/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12993884

REVISION NR K DTD 04/23/2020

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12597092

REVISION NR N DTD 08/17/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12597093

REVISION NR J DTD 08/17/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12597096

REVISION NR C DTD 08/17/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12597097

REVISION NR D DTD 08/17/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12597091

REVISION NR B DTD 10/08/2024

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12597091

REVISION NR DTD 10/07/2024

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12597091-MODELS

REVISION NR DTD

LINE ITEM 00007 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:A

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

SPECIAL PACKAGING INSTRUCTIONS (SPI)

SPI NUMBER: AM12597091

DATE: 10-08-2024

REV: B

NSN:013941928

TRIGGER HOUSING ASSEMBLY.

REFERENCE NUMBER:ZL006

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RD001

REFERENCE NUMBER:RD002

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RQ016

REFERENCE NUMBER:RQ032

REFERENCE NUMBER:RT001

REFERENCE NUMBER:ES371

REFERENCE NUMBER:CS187

REFERENCE NUMBER:ZDL06

REFERENCE NUMBER:ZL006

THIS ITEM IS A "DEFENSE ARTICLE" AS DEFINED IN AND SUBJECT TO THE

INTERNATIONAL TRAFFIC IN ARMS REGULATIONS (22 C.F.R. 120-30) AND THE

ARMS EXPORT CONTROL ACT (22 U.S.C.A. 2778-2799). ANY MANUFACTURER OR

EXPORTER OF DEFENSE ARTICLES IS REQUIRED TO REGISTER WITH THE

DIRECTORATE OF DEFENSE TRADE CONTROLS (DDTC), DEPARTMENT OF STATE.

DOCUMENTARY EVIDENCE OF REGISTRATION MAY BE REQUIRED PRIOR TO AWARD.

ADDITIONAL EXPORT RESTRICTIONS APPLY AS INDICATED HEREIN. FAILURE TO

SUBMIT DDTC REGISTRATION WHEN REQUESTED WILL MAKE A QUOTE/OFFER

IF DRAWING NOTE GIVES OPTION FOR ZINC OR MANGANESE COATING THEN

MANGANESE IS REQUIRED. DWG 11826241, NOTE 2A: REPLACE "ASTM-B211/B211M"

WITH "ASTM-B211 AND ASTM-B211M".

______________END OF EXCEPTIONS__________________

THE ITEM BEING PROCURED IS A CRITICAL GUN PART

ITEM WITH UNIQUE REQUIREMENTS.

CONTRACTOR FAT APPLIES.

AFTER RECEIPT OF QUOTES, OFFERORS MAY BE

CONTACTED TO PRICE THE FAT REQUIREMENT.

PROCESS PROCEDURES AND OR WORKMANSHIP SPECIMENS

REQUIRED BY MILITARY SPECIFICATION (S) APPLICABLE

TO THIS CONTRACT WILL BE APPROVED BY THE CONTRACT

POST AWARD CONTRACTING OFFICER (PCO).

PRODUCT INSPECTION WILL BE CONDUCTED BY THE DCMA

QAR AT THE ACTUAL MANUFACTURER'S FACILITY.

THE IDENTIFICATION OF THE ACTUAL

MANUFACTURER AND PHOSPHATE CONTRACTOR MUST BE

SUBMITTED TO THE CONTRACTING OFFICER FOR

INCLUSION IN THE AWARD. UPON AWARD, ANY CHANGES

TO THE ABOVE MUST BE APPROVED BY THE PCO VIA

FORMAL CONTRACT MODIFICATION.

PRODUCT VERIFICATION TESTING (PVT) IN ACCORDANCE

WITH PROCUREMENT NOTE E05, MAY BE INVOKED FOR THE

REFERENCED CONTRACT. IF INVOKED, PVT SAMPLES MUST BE

INSPECTED, PACKAGED AND MARKED AS REQUIRED IN THE

CONTRACT. ONE (1) SAMPLE MAY BE DESTROYED DURING

TESTING.

THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH

MUST MEET QPL/QML SPECIFICATIONS AS IDENTIFIED IN

THE TECHNICAL DATA PACKAGE. (FAR CLAUSE 52.209-1)

QUALIFICATION REQUIREMENTS IS APPLICABLE. THE

AWARDEE SHALL PROVIDE QPL/QML COMPONENTS ONLY FROM

SOURCES QUALIFIED ON THE APPLICABLE QPL(S)/QML(S).

THE IDENTIFICATION OF ALL APPLICABLE QPL/QML SOURCES

MUST BE SUBMITTED TO THE CONTRACTING OFFICER FOR

EVALUATION PRIOR TO CONTRACT AWARD.

PRODUCT VERIFICATION TESTING, IF INVOKED,

WILL BE PERFORMED PRIOR TO ACCEPTANCE OF

EACH SHIPMENT. THE CONTRACTOR MUST PROVIDE

PVT SAMPLES FROM EACH (SUB)CONTRACTOR USED

IN THE PRODUCTION OF PARTS ON THIS CONTRACT.

FIVE (5) PVT SAMPLES, UNLESS OTHERWISE

SPECIFIED, WILL BE REQUIRED TO BE IDENTIFIED

TO THOSE (SUB)CONTRACTORS WHEN THEY ARE SENT

IN FOR TESTING.

CERTIFICATE OF CONFORMANCE IS NOT AUTHORIZED.

IAW BASIC DRAWING NR 19200 12597070

REVISION NR G DTD 06/27/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 11826232

REVISION NR M DTD 05/14/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 11826241

REVISION NR T DTD 11/24/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 11826242

REVISION NR P DTD 04/27/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 11826243

REVISION NR N DTD 05/13/2021

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 11826253

REVISION NR AB DTD 11/17/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12579607

REVISION NR C DTD 08/04/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12597071

REVISION NR E DTD 11/24/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12597072

REVISION NR E DTD 09/19/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12597073

REVISION NR E DTD 11/12/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12597075

REVISION NR C DTD 04/07/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12597076

REVISION NR E DTD 11/10/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12597077

REVISION NR F DTD 09/19/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12597078

REVISION NR E DTD 11/26/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 11826254

REVISION NR P DTD 02/04/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 11826255

REVISION NR U DTD 05/13/2021

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12479550

REVISION NR C DTD 05/17/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 11826245

REVISION NR P DTD 05/13/2021

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 11826246

REVISION NR T DTD 05/13/2021

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 11826247

REVISION NR N DTD 09/10/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 11826248

REVISION NR U DTD 05/13/2021

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 11826258

REVISION NR J DTD 04/24/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 11826259

REVISION NR R DTD 04/06/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 11826260

REVISION NR J DTD 04/24/2008

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 11826261

REVISION NR J DTD 01/30/2012

PART PIECE NUMBER:

IAW REFERENCE NON GOVT STD NASM16562 (R 2019)

REVISION NR 2 DTD 09/19/2014

PART PIECE NUMBER:

IAW REFERENCE NON GOVT STD NASM21083

REVISION NR 2 DTD 11/22/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 11826240

REVISION NR F DTD 08/21/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 11826231

REVISION NR U DTD 04/07/2009

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 11826244

REVISION NR R DTD 05/13/2021

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12993884

REVISION NR J DTD 01/07/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 MIL-STD-3040

REVISION NR DTD 06/29/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12597070

REVISION NR DTD 03/05/2020

LINE ITEM 00008 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:20 CLNG/DRY:1 PRESV MAT:49

WRAP MAT:GB CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0

UNIT CONT:D3 OPI:M

INTRMDTE CONT:E5 INTRMDTE CONT QTY:020

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:40 -40 Omission of mark for sensit

NSN:014831640

LOCK, TRAVEL, SMALL ARMS (STOW LOCK ASSEMBLY).

REFERENCE NUMBER:RQ032

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RD001

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RT001

REFERENCE NUMBER:RD002

THIS ITEM IS A "DEFENSE ARTICLE" AS DEFINED IN

AND SUBJECT TO THE INTERNATIONAL TRAFFIC IN ARMS

REGULATIONS (22 C.F.R. 120-30) AND THE ARMS EXPORT

CONTROL ACT (22 U.S.C.A. 2778-2799). ANY

MANUFACTURER OR EXPORTER OF DEFENSE ARTICLES IS

REQUIRED TO REGISTER WITH THE DIRECTORATE OF DEFENSE

TRADE CONTROLS (DDTC), DEPARTMENT OF STATE.

DOCUMENTARY EVIDENCE OF REGISTRATION MAY BE REQUIRED

PRIOR TO AWARD. ADDITIONAL EXPORT RESTRICTIONS

APPLY AS INDICATED HEREIN. FAILURE TO SUBMIT DDTC

REGISTRATION WHEN REQUESTED WILL MAKE A QUOTE/OFFER

INELIGIBLE FOR AWARD.

REFERENCE NUMBER:ES371

THE ITEM BEING PROCURED IS A CRITICAL GUN PART

ITEM WITH UNIQUE REQUIREMENTS.

PRODUCT INSPECTION WILL BE CONDUCTED BY THE QAR

AT THE ACTUAL MANUFACTURER'S FACILITY IDENTIFIED

ON THIS CONTRACT. THE IDENTIFICATION OF THE

ACTUAL MANUFACTURER MUST BE SUBMITTED TO THE

CONTRACTING OFFICER FOR INCLUSION IN THE AWARD.

UPON AWARD, ANY CHANGES TO THE ABOVE MUST BE

APPROVED BY THE PCO VIA FORMAL CONTRACT

MODIFICATION.

PRODUCT VERIFICATION TESTING (PVT) IN ACCORDANCE

WITH PROCUREMENT NOTE E05, MAY BE INVOKED FOR THE

REFERENCED CONTRACT. IF INVOKED, PVT SAMPLES MUST

BE INSPECTED, PACKAGED AND MARKED AS REQUIRED IN

THE CONTRACT. ONE (1) SAMPLE MAY BE DESTROYED

DURING TESTING.

PRODUCT VERIFICATION TESTING, IF INVOKED<(>,<)>

WILL BE PERFORMED PRIOR TO ACCEPTANCE OF

EACH SHIPMENT. THE CONTRACTOR MUST PROVIDE

PVT SAMPLES FROM EACH (SUB)CONTRACTOR USED

IN THE PRODUCTION OF PARTS ON THIS CONTRACT.

FIVE (5) PVT SAMPLES, UNLESS OTHERWISE

SPECIFIED, WILL BE REQUIRED TO BE IDENTIFIED

TO THOSE (SUB)CONTRACTORS WHEN THEY ARE SENT

IN FOR TESTING.

REFERENCE NUMBER:CS187

REFERENCE NUMBER:ZD025

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 53711 7103287

REVISION NR E DTD 04/03/2019

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 53711 7103288

REVISION NR D DTD 04/18/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 53711 7103289

REVISION NR D DTD 01/28/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 53711 7103290

REVISION NR E DTD 10/07/2010

PART PIECE NUMBER:

IAW REFERENCE SPEC NR MIL-DTL-13924F

REVISION NR F DTD 05/10/2023

PART PIECE NUMBER:

IAW REFERENCE UNK QPL-24712-3 NOT 4

REVISION NR 3 DTD 10/06/2008

LINE ITEM 00009 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:20 CLNG/DRY:1 PRESV MAT:49

WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C

UNIT CONT:E5 OPI:O

INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

NSN:014850127

CARRIAGE,GUN

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RD001

REFERENCE NUMBER:RD002

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RS002

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RQ032

REFERENCE NUMBER:RT001

REFERENCE NUMBER:CQ006

REFERENCE NUMBER:CS072

REFERENCE NUMBER:CS187

REFERENCE NUMBER:ES371

REFERENCE NUMBER:ZD025

REFERENCE NUMBER:CS147

THIS ITEM IS A "DEFENSE ARTICLE" AS DEFINED IN

AND SUBJECT TO THE INTERNATIONAL TRAFFIC IN ARMS

REGULATIONS (22 C.F.R. 120-30) AND THE ARMS EXPORT

CONTROL ACT (22 U.S.C.A. 2778-2799). ANY

MANUFACTURER OR EXPORTER OF DEFENSE ARTICLES IS

REQUIRED TO REGISTER WITH THE DIRECTORATE OF DEFENSE

TRADE CONTROLS (DDTC), DEPARTMENT OF STATE.

DOCUMENTARY EVIDENCE OF REGISTRATION MAY BE REQUIRED

PRIOR TO AWARD. ADDITIONAL EXPORT RESTRICTIONS

APPLY AS INDICATED HEREIN. FAILURE TO SUBMIT DDTC

REGISTRATION WHEN REQUESTED WILL MAKE A QUOTE/OFFER

PRODUCT INSPECTION WILL BE CONDUCTED BY THE QAR

AT THE ACTUAL MANUFACTURER'S FACILITY IDENTIFIED

ON THIS CONTRACT. THE IDENTIFICATION OF THE

ACTUAL MANUFACTURER MUST BE SUBMITTED TO THE

CONTRACTING OFFICER FOR INCLUSION IN THE AWARD.

UPON AWARD, ANY CHANGES TO THE ABOVE MUST BE

APPROVED BY THE PCO VIA FORMAL CONTRACT

MODIFICATION.

PRODUCT VERIFICATION TESTING (PVT) IN ACCORDANCE

WITH PROCUREMENT NOTE E05, MAY BE INVOKED FOR THE

REFERENCED CONTRACT. IF INVOKED, PVT SAMPLES MUST BE

INSPECTED, PACKAGED AND MARKED AS REQUIRED IN THE

CONTRACT. ONE (1) SAMPLE MAY BE DESTROYED

DURING TESTING.

PRODUCT VERIFICATION TESTING, IF INVOKED<(>,<)>

WILL BE PERFORMED PRIOR TO ACCEPTANCE OF

EACH SHIPMENT. THE CONTRACTOR MUST PROVIDE

PVT SAMPLES FROM EACH (SUB)CONTRACTOR USED

IN THE PRODUCTION OF PARTS ON THIS CONTRACT.

FIVE (5) PVT SAMPLES, UNLESS OTHERWISE

SPECIFIED, WILL BE REQUIRED TO BE IDENTIFIED

TO THOSE (SUB)CONTRACTORS WHEN THEY ARE SENT

IN FOR TESTING.

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 53711 7103280

REVISION NR F DTD 11/30/2010

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 53711 7614463

REVISION NR A DTD 07/01/2005

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 53711 7614464

REVISION NR A DTD 07/01/2005

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 53711 7103284

REVISION NR E DTD 04/03/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 53711 7103286

REVISION NR C DTD 07/01/2005

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 53711 6650749

REVISION NR P DTD 09/13/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 53711 7103283

REVISION NR B DTD 07/01/2005

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 53711 7614449

REVISION NR D DTD 09/09/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 53711 5793976

REVISION NR N DTD 05/23/2014

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 53711 7520870

REVISION NR B DTD 09/13/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 53711 7520871

REVISION NR B DTD 09/13/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 53711 7103281

REVISION NR F DTD 05/22/2006

LINE ITEM 00010 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:EA CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0

UNIT CONT:10 OPI:M

INTRMDTE CONT:E5 INTRMDTE CONT QTY:020

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

NSN:015931259

ADAPTER, AMMUNITION CHUTE

REFERENCE NUMBER:RQ032

REFERENCE NUMBER:RD002

REFERENCE NUMBER:RA001

THIS ITEM IS A "DEFENSE ARTICLE" AS DEFINED IN AND SUBJECT TO THE

INTERNATIONAL TRAFFIC IN ARMS REGULATIONS (22 C.F.R. 120-30) AND THE

ARMS EXPORT CONTROL ACT (22 U.S.C.A. 2778-2799). ANY MANUFACTURER OR

EXPORTER OF DEFENSE ARTICLES IS REQUIRED TO REGISTER WITH THE

DIRECTORATE OF DEFENSE TRADE CONTROLS (DDTC), DEPARTMENT OF STATE.

DOCUMENTARY EVIDENCE OF REGISTRATION MAY BE REQUIRED PRIOR TO AWARD.

ADDITIONAL EXPORT RESTRICTIONS APPLY AS INDICATED HEREIN. FAILURE TO

SUBMIT DDTC REGISTRATION WHEN REQUESTED WILL MAKE A QUOTE/OFFER

INELIGIBLE FOR AWARD.

THE ITEM BEING PROCURED IS A CRITICAL GUN PART ITEM WITH UNIQUE

REQUIREMENTS.

PRODUCT INSPECTION WILL BE CONDUCTED BY THE QAR AT THE ACTUAL

MANUFACTURER'S FACILITY IDENTIFIED ON THIS CONTRACT. THE IDENTIFICATION

OF THE ACTUAL MANUFACTURER MUST BE SUBMITTED TO THE CONTRACTING OFFICER

FOR INCLUSION IN THE AWARD. UPON AWARD, ANY CHANGES TO THE ABOVE MUST BE

APPROVED BY THE PCO VIA FORMAL CONTRACT MODIFICATION. ,,

PRODUCT VERIFICATION TESTING (PVT) IN ACCORDANCE WITH PROCUREMENT NOTE

E05, MAY BE INVOKED FOR THE REFERENCED CONTRACT. IF INVOKED, PVT SAMPLES

MUST BE INSPECTED, PACKAGED AND MARKED AS REQUIRED IN THE CONTRACT. ONE

(1) SAMPLE MAY BE DESTROYED DURING TESTING.

PRODUCT VERIFICATION TESTING, IF INVOKED, WILL BE PERFORMED PRIOR TO

ACCEPTANCE OF EACH SHIPMENT. THE CONTRACTOR MUST PROVIDE PVT SAMPLES

FROM EACH (SUB)CONTRACTOR USED IN THE PRODUCTION OF PARTS ON THIS

CONTRACT. FIVE (5) PVT SAMPLES, UNLESS OTHERWISE SPECIFIED, WILL BE

REQUIRED TO BE IDENTIFIED TO THOSE (SUB)CONTRACTORS WHEN THEY ARE SENT

IN FOR TESTING.

REFERENCE NUMBER:RD001

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RT001

REFERENCE NUMBER:CS187

REFERENCE NUMBER:ES371

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 30003 3392AS1457

REVISION NR G DTD 09/23/2020

LINE ITEM 00011 TYPE OF COVERAGE: DLA DIRECT, CONUS

NSN:016194171

FEEDER,AMMUNITION,M

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RD001

REFERENCE NUMBER:RD002

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RT001

REFERENCE NUMBER:RQ032

REFERENCE NUMBER:CS072

REFERENCE NUMBER:CS187

REFERENCE NUMBER:ES371

THIS ITEM IS A "DEFENSE ARTICLE" AS DEFINED IN AND SUBJECT TO THE

INTERNATIONAL TRAFFIC IN ARMS REGULATIONS (22 C.F.R. 120-30) AND THE

ARMS EXPORT CONTROL ACT (22 U.S.C.A. 2778-2799). ANY MANUFACTURER OR

EXPORTER OF DEFENSE ARTICLES IS REQUIRED TO REGISTER WITH THE

DIRECTORATE OF DEFENSE TRADE CONTROLS (DDTC), DEPARTMENT OF STATE.

DOCUMENTARY EVIDENCE OF REGISTRATION MAY BE REQUIRED PRIOR TO AWARD.

ADDITIONAL EXPORT RESTRICTIONS APPLY AS INDICATED HEREIN. FAILURE TO

SUBMIT DDTC REGISTRATION WHEN REQUESTED WILL MAKE A QUOTE/OFFER

INELIGIBLE FOR AWARD.

THE ITEM BEING PROCURED IS A CRITICAL GUN PART ITEM WITH UNIQUE

REQUIREMENTS.

PRODUCT INSPECTION WILL BE CONDUCTED BY THE QAR AT THE ACTUAL

MANUFACTURER'S FACILITY IDENTIFIED ON THIS CONTRACT.

THE IDENTIFICATION OF THE ACTUAL MANUFACTURER MUST BE SUBMITTED TO THE

CONTRACTING OFFICER FOR INCLUSION IN THE AWARD. UPON AWARD, ANY CHANGES

TO THE ABOVE MUST BE APPROVED BY THE PCO VIA FORMAL CONTRACT

MODIFICATION. ,,

PRODUCT VERIFICATION TESTING (PVT) IN ACCORDANCE WITH PROCUREMENT NOTE

E05, MAY BE INVOKED FOR THE REFERENCED CONTRACT. IF INVOKED, PVT SAMPLES

MUST BE INSPECTED, PACKAGED AND MARKED AS REQUIRED IN THE CONTRACT. ONE

(1) SAMPLE MAY BE DESTROYED DURING TESTING.

PRODUCT VERIFICATION TESTING, IF INVOKED, WILL BE PERFORMED PRIOR TO

ACCEPTANCE OF EACH SHIPMENT. THE CONTRACTOR MUST PROVIDE PVT SAMPLES

FROM EACH (SUB)CONTRACTOR USED IN THE PRODUCTION OF PARTS ON THIS

CONTRACT. FIVE (5) PVT SAMPLES, UNLESS OTHERWISE SPECIFIED, WILL BE

REQUIRED TO BE IDENTIFIED TO THOSE (SUB)CONTRACTORS WHEN THEY ARE SENT

IN FOR TESTING.

IAW BASIC DRAWING NR 30003 3392AS1452

REVISION NR B DTD 04/01/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 3392AS1436

REVISION NR A DTD 04/01/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 3392AS1437

REVISION NR A DTD 04/01/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 3392AS1438

REVISION NR A DTD 04/01/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 3392AS1439

REVISION NR A DTD 04/01/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 3392AS1440

REVISION NR B DTD 04/01/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 3392AS1441

REVISION NR B DTD 04/01/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 3392AS1442

REVISION NR A DTD 04/01/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 3392AS1445

REVISION NR A DTD 04/01/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 3392AS1446

REVISION NR A DTD 04/01/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 3392AS1447

REVISION NR A DTD 04/01/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 3392AS1448

REVISION NR B DTD 04/01/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 3392AS1449

REVISION NR A DTD 04/01/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 3392AS1450

REVISION NR A DTD 04/01/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 3392AS1443

REVISION NR A DTD 04/01/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 3392AS1444

REVISION NR A DTD 04/01/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 3392AS1455

REVISION NR A DTD 04/01/2016

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 30003 3392AS2209

REVISION NR A DTD 04/01/2016

LINE ITEM 00012 TYPE OF COVERAGE: DLA DIRECT, CONUS

NSN:016662557

LEG SECTION,TRIPOD

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RD001

REFERENCE NUMBER:RD002

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RT001

REFERENCE NUMBER:RQ032

THIS ITEM IS A "DEFENSE ARTICLE" AS DEFINED IN

AND SUBJECT TO THE INTERNATIONAL TRAFFIC IN ARMS

REGULATIONS (22 C.F.R. 120-30) AND THE ARMS EXPORT

CONTROL ACT (22 U.S.C.A. 2778-2799). ANY

MANUFACTURER OR EXPORTER OF DEFENSE ARTICLES IS

REQUIRED TO REGISTER WITH THE DIRECTORATE OF DEFENSE

TRADE CONTROLS (DDTC), DEPARTMENT OF STATE.

DOCUMENTARY EVIDENCE OF REGISTRATION MAY BE REQUIRED

PRIOR TO AWARD. ADDITIONAL EXPORT RESTRICTIONS

APPLY AS INDICATED HEREIN. FAILURE TO SUBMIT DDTC

REGISTRATION WHEN REQUESTED WILL MAKE A QUOTE/OFFER

INELIGIBLE FOR AWARD.

REFERENCE NUMBER:ES371

THE ITEM BEING PROCURED IS A CRITICAL GUN PART

ITEM WITH UNIQUE REQUIREMENTS.

PRODUCT INSPECTION WILL BE CONDUCTED BY THE QAR

AT THE ACTUAL MANUFACTURER'S FACILITY IDENTIFIED

ON THIS CONTRACT. THE IDENTIFICATION OF THE

ACTUAL MANUFACTURER MUST BE SUBMITTED TO THE

CONTRACTING OFFICER FOR INCLUSION IN THE AWARD.

UPON AWARD, ANY CHANGES TO THE ABOVE MUST BE

APPROVED BY THE PCO VIA FORMAL CONTRACT

MODIFICATION.

PRODUCT VERIFICATION TESTING (PVT) IN ACCORDANCE

WITH PROCUREMENT NOTE E05, MAY BE INVOKED FOR THE

REFERENCED CONTRACT. IF INVOKED, PVT SAMPLES MUST

BE INSPECTED, PACKAGED AND MARKED AS REQUIRED IN

THE CONTRACT. ONE (1) SAMPLE MAY BE DESTROYED

DURING TESTING.

PRODUCT VERIFICATION TESTING, IF INVOKED<(>,<)>

WILL BE PERFORMED PRIOR TO ACCEPTANCE OF

EACH SHIPMENT. THE CONTRACTOR MUST PROVIDE

PVT SAMPLES FROM EACH (SUB)CONTRACTOR USED

IN THE PRODUCTION OF PARTS ON THIS CONTRACT.

FIVE (5) PVT SAMPLES, UNLESS OTHERWISE

SPECIFIED, WILL BE REQUIRED TO BE IDENTIFIED

TO THOSE (SUB)CONTRACTORS WHEN THEY ARE SENT

IN FOR TESTING.

REFERENCE NUMBER:CS187

REFERENCE NUMBER:ZD025

IAW BASIC DRAWING NR 53711 8628485

REVISION NR DTD 04/04/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 53711 6650729

REVISION NR B DTD 04/04/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 53711 6650738

REVISION NR B DTD 04/04/2017

LINE ITEM 00013 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C

UNIT CONT:E5 OPI:M

INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

GLOSSARY

PACKAGING TEXT

THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:

All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.

Mark and label all packaging and packing in accordance with MIL-STD-129.

The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

ITEM DESCRIPTION TEXT

REFERENCE NUMBER CA070

FULL AND OPEN COMPETITION APPLY

REFERENCE NUMBER CRE01

"REFERENCE MATERIAL-INCLUDES HANDBOOKS,

MANUALS, PRICE LISTS, REGISTRIES, DIRECTORIES,

BOOKS, ETC."

REFERENCE NUMBER CS187

CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE

USED NOR INCORPORATED IN ANY ITEMS TO BE

DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION

SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT

DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.

SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR

APPROVAL UNLESS THEY ARE AUTHORIZED BY THE

SPECIFICATION REQUIREMENTS.

REFERENCE NUMBER RA001

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

REFERENCE NUMBER RD002

RD002, COVERED DEFENSE INFORMATION APPLIES

REFERENCE NUMBER RP001

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER RQ001

RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS

(MANUFACTURERS AND NON-MANUFACTURERS)

REFERENCE NUMBER RQ002

RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL

REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

REFERENCE NUMBER RQ009

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

REFERENCE NUMBER RQ011

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

REFERENCE NUMBER RQ032

RQ032: EXPORT CONTROL OF TECHNICAL DATA

This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.

The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at:

https://www.dla.mil/Logistics-Operations/Enhanced-Validation/

To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data.

REFERENCE NUMBER RT001

RT001: MEASURING AND TEST EQUIPMENT

REFERENCE NUMBER RD001

RD001: DEMILITARIZATION: SMALL ARMS WEAPONS AND PARTS AND ACCESSORIES

(CATEGORY I - MUNITIONS LIST ITEMS, CATEGORY I-DODM 4160.28-VOL.3)

REFERENCE NUMBER RQ016

RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS

LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A

SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR

QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN

PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED

MANUFACTURERS LIST (QML)" APPLY.

REFERENCE NUMBER ZD004

A forging process was identified as a means to manufacture this item.

Tooling is required to produce a forging. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C<(>&<)>E Supply Chains) https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/;

(Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil.

REFERENCE NUMBER ZD025

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT

CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR

MERCURY COMPOUND. (IAW NAVSEA 5100-003D).

REFERENCE NUMBER ZD080

SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

REFERENCE NUMBER ZL006

This item contains a phosphate coating requirement IAW MIL-STD-171, MIL-DTL-16232, and TT-C-490 Types I, II, and V.

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .