Lead Test Results.pdf

SanAir ID#: 21016801

Project #: 62301 WA-14, Under

Project Name: Spring Creek Fish Hatchery-Incubator Building

Report Date: 4/12/2021

Analysis Report prepared for Atlas Labs, Inc.

Analyst: Oliver, Hannah

Test Method: SW846/M3050B/7000B

Lead Paint Analysis PAINT µg Pb Sample Size Calculated Sample Sample

Sample Description In Sample (grams) RL Results Results

21016801 - 1 Pb-1 10 0.1047 95.5 98.2 0.010 % Paint-Main Incubator Building Floor (Beginning) µg/g (ppm) By Weight

21016801 - 2 Pb-2 < 10 0.1039 96.2 <96.2 <0.010 % Paint-Main Incubator Building Floor (Middle) µg/g (ppm) By Weight

21016801 - 3 Pb-3 12 0.1021 97.9 119.1 0.012 % Paint-Main Incubator Building Floor (End) µg/g (ppm) By Weight

21016801 - 4 Pb-4 20 0.1237 80.8 162.8 0.016 % Paint-Annex Room Floor (Beginning) µg/g (ppm) By Weight

21016801 - 5 Pb-5 < 10 0.1157 86.4 <86.4 <0.009 % Paint-Annex Room Floor (Middle) µg/g (ppm) By Weight

21016801 - 6 Pb-6 12 0.1093 91.5 112.3 0.011 % Paint-Annex Room Floor (Beginning) µg/g (ppm) By Weight

Method Reporting Limit <10 µg/0.1 g paint

Signature:

Date: 4/12/2021 Date: 4/12/2021

Reviewed:

62301 WA-14, UnderProject Number:

P.O. Number:

Project Name: Spring Creek Fish Hatchery-Incubator Building 4/9/2021Collected Date:

4/12/2021 9:00:00 AMReceived Date:

4/12/2021 4:31:56 PM

21016801 SanAir ID Number

FINAL REPORT

Atlas Labs, Inc.Name:

Address: 14795 SW 72nd Ave. Suite B

Portland, OR 97224

360-852-8936Phone:

Revision Date 10/20/2020

Disclaimer

SanAir Technologies Laboratory, Inc. participates in the Environmental Lead Accreditation Program (ELAP) administered by AIHA-LAP, LLC (Lab ID162952). Refer to our accreditation certificate or www.aihaaccreditedlabs.org for an up to date list of the Fields of Testing for which we are accredited. SanAir also participates in the State of New York’s DOH-ELAP (Lab Id 11983), and has met the EPA's NLLAP program standards. This report does not constitute endorsement by AIHA-LAP, LLC and/or any other U.S. governmental agencies; and may not be accredited by every local, state or federal regulatory agency.

This report is the sole property of the client named on the SanAir Technologies Laboratory chain-of-custody (COC).

Neither results nor reports will be discussed with or released to any third party without our client’s written permission. Final reports cannot be reproduced, except in full, without written authorization from SanAir

Technologies Laboratory, Inc. The information provided in this report applies only to the samples submitted and is relevant only for the date, time, and location of sampling. SanAir is not responsible for sample collection or interpretation made by others. SanAir assumes no responsibility for information provided by the client on the COC such as project number, project name, collection dates, po number, special instructions, samples collected by, sample numbers, sample identifications, sample type, selected analysis type, flow rate, total volume or area, and start stop times that may affect the validity of the results in this report. SanAir Technologies Laboratory, Inc only assures the precision and accuracy of the data it generates and assumes no responsibility for errors or biasing that occur during collection prior to SanAir’s receipt of the sample(s). SanAir’s Method Detection Limits (MDL) and Reporting Limits

(RL) have been derived using various materials meeting each accrediting agencies’ standards. All quality control results are acceptable unless otherwise noted. Results are not corrected for blanks. For Lead Exposure Limits in

Paint, refer to HUD Guidelines for the Evaluation and Control of Lead-Based Paint Hazards and State and Federal

Regulations, where applicable.

http://www.aihaaccreditedlabs.org/