Lawn Mower Specification-19UK5626Q0055.pdf
PDF 146 KB Posted
- Solicitation number
- 19UK5626Q0055
- Issued by
-
Department of State US Embassy London
About this file
This is a Statement of Work for the procurement of a professional hydrostatic front-deck mower for the U.S. Embassy London. The equipment must feature a permanent four-wheel drive with a front-mounted cutting deck, spacious grass catcher with raised discharge height, and meet specific performance requirements.
The mower engine must have a minimum displacement of 2,190 cc with four cylinders, produce minimum 34.3 kW (47 hp), and include liquid cooling via hydraulic fan with automatic self-cleaning radiator, electronic fuel injection, and a DPF particulate filter with replaceable cartridge. The drivetrain requires permanent 4WD hydraulic transmission with four hydraulic motors on the wheels, continuously variable speed of 0–20 km/h, 60 cm steering radius, and minimum 25 L hydraulic oil tank capacity. The cutting deck must be 180 cm wide with collection capability, 20 mm solid steel edge protection, contra-rotating disc-mounted blades with anti-shock retractable tips, hydraulic continuous cutting height adjustment (20–120 mm range), and hydraulically tilted mechanism with approximately 50° maximum tilt angle. The grass catcher requires minimum 1,400 liter capacity, 250 cm discharge height, 50 cm rear overhang, Ø 400 mm turbine with two pre-selectable speeds, motorized baffle, and automatic disengagement when full. The operator station must include pneumatic suspension seat, LCD dashboard with RPM indicator and diagnostic analysis, height- and side-adjustable steering column, foldable roll-bar, and road-approved light kit. The mower must achieve minimum hourly mowing capacity of 16,500 m²/h and comply with maximum dimensions of 3,700 mm length, 1,700 mm width, and 2,000 mm height. The equipment must accept scarifier blade kit, hydraulic port for attachments, and orientable snow blade (±30°). Vendors must deliver to a London address, provide comprehensive operational instruction, offer service/repair through manufacturer's accredited engineers, and use only manufacturer's spare parts. The reference model is Grillo FD 2200 TS with 1800 mm cutting deck. Quotations must be submitted no later than 17:00 British Summer Time on September 18, 2026, with late submissions not considered.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Overseas CI FAR Feb 2025 Deviation.pdf | ||
| SF-18- Mower Spes 19UK5626Q0055.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Statement of Work – Professional Hydrostatic Front-Deck Mower
Overview
The U.S. Embassy London requires a professional hydrostatic front-deck mower with permanent four-wheel drive (4WD), a front-mounted cutting deck, and a spacious grass catcher with raised discharge height, meeting the performance requirements set out below.
Specification
1. Engine
• Displacement: minimum 2,190 cc, four cylinders
• Power: minimum 34.3 kW (47 hp)
• Cooling: Liquid-cooled via hydraulic fan, with automatic self-cleaning radiator system
• Air filtration: minimum 150 mm (6 in) double safety cartridge
• Fuel tank capacity: minimum 50 L
• Electronic fuel injection
• Emissions control: DPF particulate filter with replaceable cartridge (no DEF/AdBlue required)
2. Drivetrain & Transmission
Drive: Permanent 4WD hydraulic transmission
Transmission:
• Hydraulic, with four hydraulic motors on the wheels
• Steering: Steering wheel plus hydraulic steering with hydraulic control of the forward pump
• Steering radius: 60 cm
• Speed: Continuously variable, approximately 0–20 km/h
• Automatic and manual (via button); automatic stability control system engages/disengages as needed
• Clutch - PTO hydraulic clutch
• Hydraulic oil tank: minimum 25 L
3. Cutting Deck
• 180 cm cutting deck with collection (twin front wheels);
• Edge protection: 20 mm solid steel around cutting deck edge
• Blades: Contra-rotating, disc-mounted, with anti-shock retractable blade tips
• Cutting height adjustment: Hydraulic and continuous, range approximately 20–120 mm
• Tilt mechanism - Hydraulically tilted; max tilt angle approximately 50°
• Cutting widths 1,800 mm
• Mulching kit.
4. Grass Catcher & Collection System
• Capacity: minimum 1,400 liters
• Discharge height: 250 cm
• Rear overhang: 50 cm
• Turbine - Ø 400 mm, two pre-selectable working speeds; engaged independently from the cutting deck.
• Baffle – Motorized.
• Blades and turbine disengage automatically when grass-catcher is full.
• Automatic Door lock.
• Removable internal grid for cleaning
5. Operator Station & Controls
• Seat with pneumatic suspension.
• Dashboard: LCD display with RPM indicator, diagnostic analysis of engine and micro-switch functions; automatic RPM reduction when PTO engaged.
• All hydraulic services activated via electric push-buttons.
• Steering column: Height- and side-adjustable
• Roll-bar: Foldable.
• Light kit approved for public road use
• Diagnostic software: Monitors machine functions, warns of unsafe operations, and logs engine parameters/failures for maintenance analysis
6. Braking
• Hydraulic service brake and parking drum brake
Dimensions
• Length: maximum 3,700 mm
• Width: maximum 1,700 mm
• Height: maximum 2,000 mm
7. Performance
• Hourly mowing capacity: minimum 16,500 m²/h
Should accept following attachments
• Scarifier blades kit for flail
• Hydraulic port for attachments
• orientable snow blade (+/-30°)
Vendor requirements:
To deliver to a London address and provide comprehensive instruction on the operation of the supplied equipment
To be able to service/repair the supplied equipment with manufacture’s accredited service engineers, To use only the manufacture’s spare parts when servicing/repairing the equipment.
The following make and model are provided for reference purposes only and are representative of the Government's minimum requirements:
Grillo FD 2200 TS with a1800mm cutting deck
Quotations must be received no later than 17:00 British Summer Time (BST) on September 18, 2026.
Late quotations may not be considered.
File details come from the government source that posted it. Updated .