Laser Cutter_Engraver SOW Final .pdf
PDF 85 KB Posted
- Attached to
- Laser Cutter/Engraver
- Solicitation number
- FA252125QB059
About this file
This Statement of Work (SOW) details the Air Force Technical Applications Center's (AFTAC) requirements for a CO2 Laser Cutter/Engraver. The equipment must have a minimum 24"x36"x6" work area with X & Y pass-through capability, hold a .010" repeatable cut tolerance, cut and mark up to 18ga stainless steel, mark and cut .500" thick polymers, include a rotary 4th axis with 3-jaw clamping, and be equipped with a fume extraction system. Additional specifications include software for layout and motion control, ability to run on 110v or 220v power, and a machine footprint not exceeding 90"x50"x50".
The contractor will deliver the laser cutter/engraver to 1020 South Patrick Drive, Patrick SFB, FL 32925 within 120 days of contract award. The equipment must be repaired or replaced by the contractor at their expense for the first year of ownership. Delivery personnel must be U.S. citizens with clean records, provide proof of vehicle registration, driver's license, and insurance. The contractor must comply with Patrick SFB safety standards and OSHA regulations, and adhere to the Air Force's no-smoking policy in government buildings and vehicles.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Questions and Answers.pdf | ||
| FA252125QB059 - CSSCOApproved.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
AIR FORCE TECHNICAL APPLICATIONS CENTER
(AFTAC)
Laser Cutter/Engraver
STATEMENT OF WORK (SOW)
10 Apr 2025
1.0 DESCRIPTION OF SERVICES
Vendor shall provide a CO2 Laser Cutter/engraver with the following characteristics:
• Work Area – minimum 24”x36”x6” with X & Y pass through capability
• Motion Control – Shall be capable of holding a .010” repeatable cut tolerance range
• Material Rating – Shall be rated and equipped to cut and mark up to 18ga stainless steel.
• Shall mark and cut polymers at .500” thick to include clear acrylics
• Extra axis – Must be capable and equipped with a rotary 4th axis with 3 jaw clamping
• Safety – Must be equipped with fume extraction system to allow indoor operation.
• System can be integrated or external
• Power – Can run on 110v or 220v power, 110v preferred
• Software – Must perform layout, path editing, motion control, power control, and provide license seats for multiple users
• Space Constraints – machine should not exceed a 90”x50”x50” footprint
1.2 Maintenance Requirements
Laser cutter/engraver shall be repaired or replaced by the Contractor for the first one (1) year of ownership, at Contractor’s expense.
1.3 Period of Performance
Laser cutter/engraver shall be delivered 120 days after contract is awarded.
1.4 Place of Performance
The contractor will have the equipment delivered to 1020 South Patrick Drive, Patrick SFB, FL
32925.
2.0 POINT OF CONTACT
The point of contact for delivery will be provided on the award.
3.0 WORK HOURS
Delivery may be completed between the hours of 8:00 AM and 3:00 PM, Monday through
Friday, excluding federal holidays. Any work performed outside of aforementioned work hours must be approved by the cognizant Contracting Officer.
4.0 GOVERNMENT FURNISHED PROPERTY (GFP) AND SERVICES
The Government will not provide any property or services for the contractor other than the address identified for delivery and unloading support. The laser cutter/engraver will remain under secure control by the Government during the period of performance identified in this
SOW.
5.0 BASE ACCESS
Delivery personnel are required to be a citizen of the United States and be free of any felony records. Proof of current vehicle registration, driver’s license and vehicle insurance must be made available prior to issuance of base access permits. The delivery contractor shall obtain base access for all personnel, subcontractors, vehicles and equipment.
6.0 REGULATIONS AND STANDARDS
The delivery contractor shall comply with all PSFB safety standards and all Occupational Safety, Health Act Safety and Health Standards (OSHA) standards. Resolution of citations for violations of OSHA is the contractor’s responsibility. The delivery contractor shall be responsible for supervision of all contract personnel and performance of all Contractor related functions.
7.0 NO SMOKING POLICY
There is an Air Force Policy of NO SMOKING in any Government building or vehicle in accordance with AFI 48-104 (11 Jul 2019) Tobacco Free Living.
File details come from the government source that posted it. Updated .