Item Description for AV Equipment.pdf
PDF 366 KB Posted
- Solicitation number
- 1-FA8125-25-Q-0024
About this file
This is a Statement of Work (SOW) detailing audio-visual equipment requirements for three conference rooms (230, 223, and 130) and four offices (216, 218, 232, 233) in Building 9504 for the AMXS/568th Air Force unit. The document specifies comprehensive AV system installations including video cameras, microphones, speakers, display mounts, HDMI connectivity, and equipment racks for each conference room, with specific requirements for room sizes ranging from 273 to 1,227 square feet.
The technical specifications require all equipment to be TAA compliant with no wireless components, supporting 4K video at 60Hz, PoE compatibility, and integration with existing displays. Key components include 18-20 unit AV racks, networking switches with minimum 12 PoE ports, ceiling-mounted microphones and speakers, PTZ cameras, HDMI transmitters/receivers, and USB 3.0 extension kits. The contractor must provide cable management solutions, equipment diagrams, and a minimum 3-year warranty including parts, labor and on-site training. For the offices, single gang HDMI wall plates must be installed near CAT5 plates with direct TV connectivity through in-wall cable routing.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Questions and Answers.pdf | ||
| Amendment 0001 FA812525Q0024.pdf | ||
| SOW for AV Equipment.pdf | ||
| B9504 Conference Rooms.pdf | ||
| Solicitation - FA812525Q0024.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Item Description
The AMXS / 568th is requesting utilization of funds for the purchase of Audio and Video Equipment needed for Conference Rooms and Offices in Building 9504. Contractor shall provide detailed quotations on how the requirements will be met that are listed within this SOW and the item description.
The requested equipment item descriptions/specifications are outlined below.
Requirements for Conference Room 230
Conference room shall be able to telecommunicate with participants outside of office.
Conference room shall be able to present without much delay to online participants.
Equipment shall be properly connected, installed, and fully operational without any defects or malfunctions.
New equipment installed shall be integrated with existing displays to ensure compatibility and functionality.
Contractor shall designate the admin table located in the northside corner the main location for functionality and displaying content on the conference room system computer, provided by the government, while having the center table hub the ability to take control of the display and presentation of video content.
The contractor shall be responsible for supplying and installing all necessary interconnecting wiring, including HDMI adapters, cables, and USB cabling, to ensure proper connectivity and functionality.
Wiring shall be routed through cable wells underneath conference room table where feasible.
Any wiring not routed through the cable wells shall be routed through the ceiling or walls. Any wires exposed shall be adequately covered to prevent potential tripping hazard.
The contractor shall carefully plan the routing of the wiring to minimize potential tripping hazards. Proper cable management shall be employed to prevent tangling or interference with other equipment.
Contractor shall label wires and provide a diagram of cable routing with legend table referencing labeled wires.
Wires routed in the ceiling shall be suspended above the ceiling tiles and shall be organized neatly.
Room 230 shall be wired to provide complete connection between the AV system and the presenter’s laptop for seamless presentations and conferencing capabilities.
Contractor shall install the adequate number of microphones needed to capture speech from any location and transmit to remote participants during teleworking meetings within the 273 square foot room. Drop down microphone styles are allowed.
The microphone(s) and speaker shall be installed in the ceiling of the conference room.
The microphone(s) and speakers shall be positioned to ensure uniform audio coverage throughout the room for all participants. Participants are marked at “X” in the document labeled “B9504 Conference rooms”.
The equipment shall be securely mounted and properly connected to the audio system.
The microphone(s) shall have noise cancellation and echo reduction to enhance audio clarity.
Camera shall be installed securely, facing the conference table ensuring proper alignment and stability to provide clear and unobstructed view.
The camera shall not obstruct the display or impede the functionality of the TV.
The camera shall have clear video in dimly lit environments and have a minimum resolution of 1080p.
The camera shall capture the entire conference room and participants.
The contractor shall install the portable equipment rack capable of securely housing the necessary AV equipment positioned along the north side wall.
The rack shall feature a lockable mechanism to ensure the security of the equipment.
The rack shall be of size suitable for the intended space and capable of accommodating all required AV components. The equipment shall be securely mounted and properly connected to the audio system, with functionality tested and confirmed before finalizing the installation.
A designated location on the table shall serve as the main hub for connections. All wiring required from the equipment location shall be routed along the ground and then up to the table in a concealed manner to ensure a neat and organized appearance.
Conference Room 230 Equipment Specifications
AV rack o 18–20-unit rack space that are fully adjustable by rack rails with rack unit spacing for threads o Size minimum of 20” x 20” x 34” and maximum of 26” x 26” x 38”, with load capacity minimum of 450 lb.
o Set of 4 casters with two locking casters 2 in. In diameter with load capacity minimum of 250 lb., installed on the av rack equipment.
o Front door shall have a handle and rear and side panels shall be removable and all panels shall have key locks.
o Cable access from top side with central hole.
o EIA/TIA compliant o Manual included
Networking switch o Minimum number of 12 PoE ports with minimum 2 SFP ports. Ports shall be compatible with equipment on list.
o Wattage needed to power all equipment on list.
o Mountable to av rack on list o Support audio video bridging with key provided.
o 110V power supply, power cord with plug included with minimum length 18” o Instructions manual included
Network video endpoint o HDMI video switcher minimum of 3 HDMI input and 2 HDMI output minimum of 1080p o Allow for users to mirror content and audio from their respective laptops/devices.
o 32 x 32 network audio channels o Dante channels that are 32 x 32 minimum and software-based o Minimum of 8 acoustic echo cancelation channels o Supports a minimum of 3 tabletop microphones o Minimum of one voice over internet protocol softphone o Audio i/o via HDMI, USB, and 3.5 mm o Size maximum of 12” x 12” x 3” and mountable to av rack on list o Power over ethernet (PoE) compatible with network switch on list o Instructions manual included
Video camera o Fixed focus lens, electronic pan, tilt, zoom features o Power over ethernet (PoE) compatible with network switch on list o Have a single connection port for multipurpose. (video, power, and control) o USB connection for video output to computed device.
o Manual included
Microphone(s) o Dante Primary and Secondary output ports o Have a working factory reset switch on device.
o Maximum 10 ms latency o Power over ethernet (PoE) compatible with network switch on list o Certified for Microsoft teams o Manual included
Ceiling speaker o Size of 2' x 2' for ceiling tile size matching with a weight maximum of 14 lb.
o The Volt system shall match Power amplifier on list.
o 8 ohms direct o Selectable power taps accessed via speaker wiring connections o Listed for use in airspaces o Manual included
Power amplifier o Size maximum of 2” x 6” x 12”.
o Rack mountable to av rack on list.
o Inputs: balanced and unbalanced stereo and mono on a captive screw connector o Remote volume and mute control port o The Voltage shall match ceiling speaker on list.
o 60-watt power amp o 110V power supply, power cord with plug included with minimum length 18” o Manual included
HDMI transmitter o mountable to av rack on list with size maximum of 2” x 6” x 6”.
o 1 single link female HDMI type A with a minimum of 1080p at 60 Hz over a shielded CATx cable.
o Have a minimum of 8 Gbps for video data transmission o 1 pc unbalanced level stereo for audio input o 1 stereo 2 channel, unbalanced and balanced for audio output with 3.5 mm screw connecter for audio connection and accepts additional analog stereo audio signals o JITC certified o 110V power supply, power cord with plug included with minimum length 18” o Compatible with CATx shielded twisted pair cable.
o Transmitter and receiver must be compatible with each other, connected by
CATx Cable.
o Manual included
HDMI receiver o mountable to av rack on list with size maximum of 2” x 6” x 6”.
o 1 single link female HDMI type A with a minimum of 1080p at 60 Hz over a shielded CATx cable o Have a minimum of 8 Gbps for video data transmission o 1 pc unbalanced level stereo for audio input o 1 stereo 2 channel, unbalanced and balanced for audio output with 3.5 mm screw connecter for audio connection and accepts additional analog stereo audio signals o JITC certified o 110V power supply, power cord with plug included with minimum length 18” o Compatible with CATx shielded twisted pair cable.
o Transmitter and receiver must be compatible with each other, connected by
CATx Cable.
o Manual included
USB 3.0 extension kit o Kit to include minimum of 1 transmitter, 1 receiver, mounting brackets for av rack listed on list, and power supply with 110v input. Kit mountable to av rack list.
o Transmitter size maximum of “2” x ”6” x ”6”. And compatible with USB 3.0, 3.1,3.2 gen-1 ports that support up to 5 Gbps o Receiver size maximum of “2” x ”6” x ”6”.
o Signal distance shall be able to cover entire area of conference room at minimum.
o Transmitter shall connect using USB type C connection and have a minimum of
1 female USB type C port.
o Receiver shall have a minimum of 2 USB ports, with at least one USB 1.0 and one USB 2.0.
o Receiver and Transmitter shall connect through 2-LC connector cables (fiber optic cables).
HDMI adapter o DisplayPort to HDMI adapter supporting 4k at 60 Hz HDMI cables o All HDMI cables to support 4k at 60 Hz USB 3.0 extension cable o Maximum 1 dB insertion loss
Requirements for Conference Room 223
Equipment shall be properly connected, installed, and fully operational without any defects or malfunctions.
New equipment installed shall be integrated with existing displays to ensure compatibility and functionality.
Contractor shall designate the admin table located in the northside corner the main location for functionality and displaying content on the conference room system computer, provided by the government, while having the center table hub the ability to take control of the display and presentation of video content.
The contractor shall be responsible for supplying and installing all necessary interconnecting wiring, including HDMI adapters, cables, and USB cabling, to ensure proper connectivity and functionality.
Wiring shall be routed through cable wells underneath conference room table where feasible.
Any wiring not routed through the cable wells shall be routed through the ceiling or walls. Any wires exposed shall be adequately covered to prevent potential tripping hazard.
The contractor shall carefully plan the routing of the wiring to minimize potential tripping hazards. Proper cable management shall be employed to prevent tangling or interference with other equipment.
Contractor shall label wires and provide a diagram of cable routing with legend table referencing labeled wires.
Wires routed in the ceiling shall be suspended above the ceiling tiles and shall be organized neatly.
Room 223 shall be wired to provide complete connection between the AV system and the presenter’s laptop for seamless presentations and conferencing capabilities.
Contractor shall install the adequate number of microphones needed to capture speech from any location and transmit to remote participants during teleworking meetings within the 537 square foot room. Drop down microphone styles are allowed.
The microphone(s) and speaker shall be installed in the ceiling of the conference room.
The microphone(s) and speakers shall be positioned to ensure uniform audio coverage throughout the room for all participants. Participants are marked at “X” in the document labeled “B9504 Conference rooms”.
The equipment shall be securely mounted and properly connected to the audio system.
The microphone(s) shall have noise cancellation and echo reduction to enhance audio clarity.
Camera shall be installed securely, facing the conference table ensuring proper alignment and stability to provide clear and unobstructed view.
The camera shall not obstruct the display or impede the functionality of the TV.
The camera shall have clear video in dimly lit environments and have a minimum resolution of 1080p.
The camera shall capture the entire conference room and participants.
The contractor shall install the portable equipment rack capable of securely housing the necessary AV equipment positioned along the north side wall.
The rack shall feature a lockable mechanism to ensure the security of the equipment.
The rack shall be of size suitable for the intended space and capable of accommodating all required AV components. The equipment shall be securely mounted and properly connected to the audio system, with functionality tested and confirmed before finalizing the installation.
A designated location on the table shall serve as the main hub for connections. All wiring required from the equipment location shall be routed along the ground and then up to the table in a concealed manner to ensure a neat and organized appearance.
Contractor shall install an additional display mount onto the adjacent west wall. The base of the TV mounted on this display mount shall be positioned at a height of 5.5’ above the ground level.
The TV mount shall be securely fastened and verified of its structural integrity before finalizing the installation.
The TV connections shall have a minimum height of 5.5’ and shall be behind the Display.
Conference Room 223 Equipment Specifications spacing for threads o Size minimum of 20” x 20” x 34” and maximum of 26” x 26” x 38”, with load capacity minimum of 450 lb.
o Set of 4 casters with two locking casters 2 in. In diameter with load capacity minimum of 250 lb., installed on the av rack equipment.
o Front door shall have a handle and rear and side panels shall be removable and all panels shall have key locks.
o Cable access from top side with central hole.
o EIA/TIA compliant o Manual included
Networking switch o Minimum number of 12 PoE ports with minimum 2 SFP ports.
o Minimum 660W total power budget.
o Mountable to av rack on list o Support audio video bridging with key provided.
o 110V power supply, power cord with plug included with minimum length 18” o Instructions manual included
Network video endpoint o HDMI video switcher minimum of 3 HDMI input and 2 HDMI output minimum of 1080p o Allow for users to mirror content and audio from their respective laptops/devices.
o 32 x 32 network audio channels o Dante channels that are 32 x 32 minimum and software-based o Minimum of 8 acoustic echo cancelation channels o Supports a minimum of 3 tabletop microphones o Minimum of one voice over internet protocol softphone o Audio i/o via HDMI, USB, and 3.5 mm o Size maximum of 12” x 12” x 3” and mountable to av rack on list o Power over ethernet (PoE) compatible with network switch on list o Instructions manual included
Video camera o Fixed focus lens, electronic pan, tilt, zoom features o Power over ethernet (PoE) compatible with network switch on list o Have a single connection port for multipurpose. (video, power, and control) o USB connection for video output to computed device.
o Manual included
Microphone(s) o Dante Primary and Secondary output ports o Have a working factory reset switch on device.
o Maximum 10 ms latency o Power over ethernet (PoE) compatible with network switch on list o Certified for Microsoft teams o Manual included
Ceiling speaker o Size of 2' x 2' for ceiling tile size matching with a weight maximum of 14 lb.
o The Volt system shall match Power amplifier on list.
o 8 ohms direct o Selectable power taps accessed via speaker wiring connections o Listed for use in airspaces o Manual included
Power amplifier o Size maximum of 2” x 6” x 12”.
o Rack mountable to av rack on list.
o Inputs: balanced and unbalanced stereo and mono on a captive screw connector o Remote volume and mute control port o The Voltage shall match ceiling speaker on list.
o 60-watt power amp o 110V power supply, power cord with plug included with minimum length 18” o Manual included
HDMI transmitter o mountable to av rack on list with size maximum of 2” x 6” x 6”.
o 1 single link female HDMI type A with a minimum of 1080p at 60 Hz over a shielded CATx cable.
o Have a minimum of 8 Gbps for video data transmission o 1 pc unbalanced level stereo for audio input o 1 stereo 2 channel, unbalanced and balanced for audio output with 3.5 mm screw connecter for audio connection and accepts additional analog stereo audio signals o JITC certified o 110V power supply, power cord with plug included with minimum length 18” o Compatible with CATx shielded twisted pair cable.
o Transmitter and receiver must be compatible with each other, connected by CATx Cable.
o Manual included HDMI receiver o mountable to av rack on list with size maximum of 2” x 6” x 6”.
o 1 single link female HDMI type A with a minimum of 1080p at 60 Hz over a shielded CATx cable o Have a minimum of 8 Gbps for video data transmission o 1 pc unbalanced level stereo for audio input o 1 stereo 2 channel, unbalanced and balanced for audio output with 3.5 mm screw connecter for audio connection and accepts additional analog stereo audio signals o JITC certified o 110V power supply, power cord with plug included with minimum length 18” o Compatible with CATx shielded twisted pair cable.
o Transmitter and receiver must be compatible with each other, connected by
CATx Cable.
o Manual included
USB 3.0 extension kit o Kit to include minimum of 1 transmitter, 1 receiver, mounting brackets for av rack listed on list, and power supply with 110v input. Kit mountable to av rack list.
o Transmitter size maximum of “2” x ”6” x ”6”. And compatible with USB 3.0, 3.1,3.2 gen-1 ports that support up to 5 Gbps o Receiver size maximum of “2” x ”6” x ”6”.
o Signal distance shall be able to cover entire area of conference room at minimum.
o Transmitter shall connect using USB type C connection and have a minimum of
1 female USB type C port.
o Receiver shall have a minimum of 2 USB ports, with at least one USB 1.0 and one USB 2.0.
Receiver and Transmitter shall connect through 2-LC connector cables (fiber optic cables).
HDMI adapter o DisplayPort to HDMI adapter supporting 4k at 60 Hz HDMI cables o All HDMI cables to support 4k at 60 Hz USB 3.0 extension cable o Maximum 1 dB insertion loss tilting wall mount o Wall mount for 85” display with weight capacity minimum of 225 lb.
o Tilt minimum of +4° / -10° o Certifications of OSHPD, TAA, and UL listed
Requirements for Conference Room 130
Equipment shall be properly connected, installed, and fully operational without any defects or malfunctions.
New equipment installed shall be integrated with existing displays to ensure compatibility and functionality.
Contractor shall designate the admin table located in the southwest corner the main location for functionality and displaying content on the conference room system computer, provided by the government, while having the center table hub the ability to take control of the display and presentation of video content.
The contractor shall be responsible for supplying and installing all necessary interconnecting wiring, including HDMI adapters, cables, and USB cabling, to ensure proper connectivity and functionality.
Wiring shall be routed through cable wells underneath conference room table where feasible.
Any wiring not routed through the cable wells shall be routed through the ceiling or walls. Any wires exposed shall be adequately covered to prevent potential tripping hazard.
The contractor shall carefully plan the routing of the wiring to minimize potential tripping hazards. Proper cable management shall be employed to prevent tangling or interference with other equipment.
Contractor shall label wires and provide a diagram of cable routing with legend table referencing labeled wires.
Wires routed in the ceiling shall be suspended above the ceiling tiles and shall be organized neatly.
Room 130 shall be wired to provide complete connection between the AV system and the presenter’s laptop for seamless presentations and conferencing capabilities.
Contractor shall install the adequate number of microphones needed to capture speech from any location and transmit to remote participants during teleworking meetings within the 1,227 square foot room. Drop down microphone styles are allowed.
The microphone(s) and speaker shall be installed in the ceiling of the conference room.
The microphone and speakers shall be positioned to ensure uniform audio coverage throughout the room for all participants. Participants are marked at “X” in the document labeled “B9504 Conference rooms”.
The equipment shall be securely mounted and properly connected to the audio system.
The microphone(s) shall have noise cancellation and echo reduction to enhance audio clarity.
Camera shall be installed securely, facing the conference table ensuring proper alignment and stability to provide clear and unobstructed view.
The camera shall not obstruct the display or impede the functionality of the TV.
The camera shall have clear video in dimly lit environments and have a minimum resolution of 1080p.
The camera shall capture the entire conference room and participants.
Contractor shall install a central hub positioned at the head of the table to facilitate presenter’s laptop connection. This hub shall utilize HDMI/Display port cables and USB-C cables for connectivity. All wiring required from the equipment location shall be routed along the ground and then up to the table in a concealed manner to ensure a neat and organized appearance.
Contractor shall install and program the touch panel next to the central hub to enable presenters to power on all displays, adjust projector screen heights, and control audio volume levels.
The AV rack shall be positioned behind the admin table in the southwest corner of the room.
The rack shall feature a lockable mechanism to ensure the security of the equipment.
The rack shall be of size suitable for the intended space and capable of accommodating all required AV components. The equipment shall be securely mounted and properly connected to the audio system, with functionality tested and confirmed before finalizing the installation.
The contractor shall install a 12x ePTZ camera between the two projector screens situated on the east wall. The camera shall be positioned 8’ feet from ground level box for optimal viewing angles of the conference table and functionality.
The contractor shall install ceiling speakers and a ceiling microphone, strategically positioned to ensure balanced audio output and input. The contractor shall configure the speaker layout and microphone placement to achieve uniform coverage and balanced audio levels across the room.
The contractor shall install a total of 4 TV wall mounts, with 2 mounts installed on the north side wall, with one TV mount towards the east side of the table and the other on towards the west side table. The south side wall shall mirror the north side wall. Each TV mount shall be position so that the base of the TV is 5.5’ above ground level.
The TV mounts shall be securely fastened and verified of its structural integrity before finalizing the installation.
The TV connections shall have a minimum height of 5.5’ and shall be behind the Display.
Conference Room 130 Equipment Specifications spacing for threads o Size minimum of 20” x 20” x 34” and maximum of 26” x 26” x 38”, with load capacity minimum of 450 lb.
o Set of 4 casters with two locking casters 2 in. In diameter with load capacity minimum of 250 lb., installed on the av rack equipment.
o Front door shall have a handle and rear and side panels shall be removable and all panels shall have key locks.
o Cable access from top side with central hole.
o EIA/TIA compliant o Manual included
Networking switch o Minimum number of 12 PoE ports with minimum 2 SFP ports.
o Minimum 660W total power budget.
o Mountable to av rack on list o Support audio video bridging with key provided.
o 110V power supply, power cord with plug included with minimum length 18” o Instructions manual included
Network video endpoint o HDMI video switcher minimum of 3 HDMI input and 2 HDMI output minimum of 1080p o Allow for users to mirror content and audio from their respective laptops/devices.
o 32 x 32 network audio channels o Dante channels that are 32 x 32 minimum and software-based o Minimum of 8 acoustic echo cancelation channels o Supports a minimum of 3 tabletop microphones o Minimum of one voice over internet protocol softphone o Audio i/o via HDMI, USB, and 3.5 mm o Size maximum of 12” x 12” x 3” and mountable to av rack on list o Power over ethernet (PoE) compatible with network switch on list o Instructions manual included
HDMI to HDMI output o Resolution minimum of 1080p at 60 Hz and analog audio at range up to 150’ over shielded CATx cable with DTP 230 signal type o Single link HDMI video input with 8 DTP video output - female connectors, and audio output with DTP output of 8 embedded digital audio on DTP signal o Size maximum of 4” x 18” x 12” and be mountable to av rack on list o Manual included
HDMI receiver o Compatible with HDMI-to-HDMI output on list with DTP 230 signal type o Mountable to av rack on list with size of 2” x 12” x 12”.
o 1 single link DisplayPort and 1 female display port with a minimum of 1080p at
60 Hz over a shielded CATx cable and have a minimum of 8 Gbps for video data o 1 CATx signal input-female connecter minimum.
o 1 pc unbalanced level stereo for audio input o 1 stereo 2 channel, unbalanced and balanced for audio output o JITC certified o 110V power supply, power cord with plug included with minimum length 18" o Compatible with CATx shielded twisted pair cable o Manual included
Video camera o 12x optical zoom 60-degree horizonal field of view minimum o Fixed focus lens, electronic pan, tilt, zoom o Power over ethernet compatible with PoE on network switch on list o Shall be able to mount on a wall.
o HDMI output 1080p at 30 fps minimum o Manual included
Touch control panel o Minimum 5” 1080p resolution with PCAP touch screen display o Power shall be run through ethernet port to allow for one cable to manage both power and data o Device shall have a fully customizable user control interface.
o Able to be mounted on tabletop with a horizontal panel orientation o Able to power the displays and projectors on or off, manage room audio control, and able to change the projectors screen height.
o Manual included.
Microphone(s) o Dante Primary and Secondary output ports RJ 45 sockets o Have a working factory reset switch on device.
o Power over ethernet (PoE) compatible with network switch on list o Certified for Microsoft teams o Manual included
In-ceiling loudspeaker o Size between 5” to 10” diameter speaker, weight maximum of 10 lb. and shall be capable of being installed in ceiling tile size of 2’ x 2’.
o Ul2043 - safe for use in air handling space o Coverage angle minimum of 100 degrees o 8-ohm bypass o Include 30-watt with 70V/100V low-saturation/low-loss transformer having selectable taps o Manual included
Audio amplifier o Size maximum of 3” x 12” x 12” and mountable to av rack listed o 2 channels minimum consisting of least one of 4ω and 8ω modes at 200w with bridged outputs of 400w o Each channel shall provide a minimum of 70V/100V per connection into
70V/100V outputs.
o 110V power supply, power cord with plug included with minimum length 18" o FCC class b approval o Manual included
USB 3.0 extension kit o Kit to include minimum of 1 transmitter, 1 receiver, mounting brackets for av rack listed on list, and power supply with 110v input. Kit mountable to av rack list.
o Transmitter size maximum of “2” x ”6” x ”6”. And compatible with USB 3.0, 3.1,3.2 gen-1 ports that support up to 5 Gbps o Receiver size maximum of “2” x ”6” x ”6”.
o Transmitter shall connect using USB type C connection and have a minimum of
1 female USB type C port.
o Receiver shall have a minimum of 2 USB ports, with at least one USB 1.0 and one USB 2.0.
o Receiver and Transmitter shall connect through 2-LC connector cables (fiber optic cables).
HDMI adapter o DisplayPort to HDMI adapter between 4” to 10” and support 4k at 60 Hz
HDMI cables o All HDMI cables to support 4k at 60 Hz
USB 3.0 extension cable o Maximum 1 dB insertion loss
Tilting wall mount o Wall mount for 85” display with weight capacity minimum of 225 lb.
o Tilt minimum of +4° / -10° o Certifications of OSHPD, TAA, and UL listed
Power strips o Power strip with 9 outlets minimum o Cord length between 4’ - 10’ o Etl listed
Office video connections for office: 216, 218, 232, 233
The contractor shall install single gang HDMI wall plates into offices.
HMDI Wall-plate shall be installed to the left or right side of the CAT5 wall plate around the office desk.
The Wall-plate shall be connected to the TV in the office room by an HDMI cable being routed inside the walls and ceiling to then be connect to the back of the TV.
Each Office Equipment Requirements
HDMI cables supporting 4k at 60 Hz single gang HDMI with pigtail o gang wall plate with HDMI female pigtail connector
Contractor shall provide a minimum 3-year extended warranty, including parts, labor and on-site training.
All equipment shall be TAA compliant and shall be wired connection only and shall not have any wireless components.
File details come from the government source that posted it. Updated .