ISEA_XHT_Test Tile_Drawing.pdf

ISEA XHT TEST TILE

-XXXXXXX05HX0

NAVAL SURFACE WARFARE CENTER

PHILADELPHIA DIVISION - CODE 332

PHILADELPHIA, PA 19112

2024/07/03

ISEA APPROVAL:

INITIAL RELEASE-

REV

WASHINGTON, D.C. 20376-0001

NAVAL SEA SYSTEMS COMMAND

DEPARTMENT OF THE NAVY

DRAWING NUMBERSIZE CAGE CODE

REVISIONS

REV DESCRIPTION DATE APPROVED

WARNING - THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE

EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT

(SECTION 2751 OF TITLE 22, UNITED STATES CODE) OR THE EXPORT

CONTROL REFORM ACT OF 2018 (CHAPTER 58 SECTIONS 4801-4852

OF TITLE 50, UNITED STATES CODE). VIOLATIONS OF THESE

EXPORT LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES.

DISSEMINATE IN ACCORDANCE WITH THE PROVISIONS OF DOD

DIRECTIVE 5230.25 AND DOD INSTRUCTION 2040.02.

ANGLES: ± 0.5°

PART TITLE

PREPARED BY:

TWH APPROVAL:

CONTROLLED BY: DON

CONTROLLED BY: NAVSEA

CUI CATEGORY: CTI

DISTRIBUTION STATEMENT: D

POC: JAMES.M.MCDONNELL.CIV@US.NAVY.MIL

CUI

CUI

UNLESS OTHERWISE SPECIFIED, ALL UNTOLERANCED

FEATURES SHALL HAVE A PROFILE TOLERANCE OF

DIMENSIONAL TOLERANCES REVIEWED BY:

DESIGN ACTIVITY

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED

TO THE DEPARTMENT OF DEFENSE AND U.S. DoD

CONTRACTORS ONLY CRITICAL TECHNOLOGY, 02/01/2024.

OTHER REQUESTS FOR THIS DOCUMENT MUST BE REFERRED

TO COMMANDING OFFICER, NAVSEA, WASHINGTON DC 20376.

CAD MAINTAINED, CHANGES SHALL BE INCORPORATED BY THE DESIGN ACTIVITY.

GENERAL NOTES:

UNLESS OTHERWISE SPECIFIED, ALL UNITS ARE IN INCHES1.

INTERPRETATION OF THIS DRAWING SHALL BE IAW MIL-STD-31000B, AS APPLICABLE. 2.

THIS DOCUMENT CONTAINS ATTACHMENT FILES AS FOLLOWS (ADDITIONAL DOCUMENTS MAY ALSO BE 3.

ATTACHED AND SHALL BE APPLICABLE AS DESCRIBED HEREIN):

c332-ISEA_XHT_TestTile.STEP -------------------- CAD MODEL OF FINISHED PART IN "STEP" FORMAT (INCHES)A.

A STANDARD FOR THE EXCHANGE OF PRODUCT MODEL DATA (STEP) FILE ATTACHED TO THIS DOCUMENT, 4.

REPRESENTS THE PART SPECIFIED IN THIS TECHNICAL DRAWING (SEE ATTACHMENT LIST FOR THE FILE NAME).

ALL UNDIMENSIONED FEATURES CAN BE OBTAINED FROM THE MODEL ATTACHED TO THIS DOCUMENT. ALL 5.

VALUES QUERIED OR DERIVED FROM THE MODEL SHALL BE BASIC.

VISUALLY INSPECT PART TO BE FREE OF CRACKS, LAYER SEPARATION, MISSING FEATURES, EXCESS MATERIAL, 6.

OR OTHER RELATED MANUFACTURING ISSUES. INDICATION OF ANY OF THESE OR OTHER MANUFACTURING

ANOMOLIES, SHALL BE CAUSE FOR REJECTION.

BREAK ALL SHARP EDGES, REMOVE ALL BURRS, BLOBS, AND EXCESS MATERIAL.7.

IN ADDITION TO ACCEPTING OVERALL PROFILE TOLERANCE AS SHOWN, AFTER PART REMOVAL, VERIFY 8.

DIMENSIONS AS SHOWN BY FLAG NOTE 8 IN THIS TECHNICAL DRAWING.

ALL AM PARTS SHALL BE MARKED IN ACCORDANCE WITH MIL-STD-130. MARKING CAN BE DONE USING 9.

INDELIBLE INK (BLACK, SILVER, ETC.) OR ANOTHER PERMANENT MARKING METHOD THAT DOES NOT AFFECT PART'S FORM, FIT, OR FUNCTION. MARKING SHALL INCLUDE THE MANUFACTURER CAGE CODE, DRAWING

NUMBER, FOLLOWED BY MATERIAL USED.

FOR EXAMPLE, IF THIS PART IS MANUFACTURED BY NSWCPD USING PETG MATERIAL, IT SHALL BE MARKED A.

AS: 05HX0 - XXXXXXX - PETG

3 DIMENSIONAL VIEW

FOR REFERENCE ONLY. SEE NOTE 5.

SHEET 1 OF 4SCALE: 1:2

BMATERIAL:

XHT WEIGHT:

16"

36"

44"

2X R22"

4 38 "

-XXXXXXX05HX0

PART NOTES:

P1: AN ADDITIONAL 3/8" SHALL BE ADDED TO THE

THICKNESS OF LAYER 3 (L3: THE BOTTOM WHITE LAYER).

THIS WILL MAKE THE TOTAL THICKNESS 4 3/8".

REVDRAWING NUMBERSIZE CAGE CODE

CUI

CUI

EXPORT CONTROLLED INFORMATION: USE OR DISCLOSURE OF THIS INFORMATION IS SUBJECT TO THE

RESTRICTIONS ON THE TITLE PAGE OF THIS DOCUMENT.

SCALE: 1:10 SHEET 2 OF 4

B

A

A

A

B

B

QUADRANT 1

QUADRANT 4

QUADRANT 2

QUADRANT 3

4X R1 1 8 " 1 1

2 " 4 "

3 1 2 " 3 7

16 "

R21 5 16 "

6X R20 1 4 "

9"

9 1 8 "

2 "

2 "

DETAIL A

SCALE 1 : 5

O-RING GROOVEVACUUM CHANNEL

VACUUM HOLE

-XXXXXXX05HX0

PART NOTES (CON'T):

P2: QUADRANTS 2, 3, & 4 ARE MIRRORS OF QUADRANT 1

REVDRAWING NUMBERSIZE CAGE CODE

CUI

CUI

EXPORT CONTROLLED INFORMATION: USE OR DISCLOSURE OF THIS INFORMATION IS SUBJECT TO THE

RESTRICTIONS ON THE TITLE PAGE OF THIS DOCUMENT.

SCALE: 1:10 SHEET 3 OF 4

16 " ± 1

32 "

16 " ± 1

32 "

4 " ± 1

32 "

4 " ± 1

32 "

SECTION A-A

VACUUM CHANNEL AND O-RING GROOVE

SCALE 1 : 1

O-RING GROOVE

VACUUM CHANNEL

4 " ± 1

32 "

SECTION B-B

VACUUM HOLE

SCALE 1 : 1

-XXXXXXX05HX0

REVDRAWING NUMBERSIZE CAGE CODE

CUI

CUI

EXPORT CONTROLLED INFORMATION: USE OR DISCLOSURE OF THIS INFORMATION IS SUBJECT TO THE

RESTRICTIONS ON THE TITLE PAGE OF THIS DOCUMENT.

SCALE: 1:10 SHEET 4 OF 4

ISO-10303-21;

HEADER;

FILE_DESCRIPTION (( 'STEP AP214' ),

'1' );

FILE_NAME ('c332-ISEA_XHT_Test Tile.STEP', '2024-07-03T19:09:27', 'SwSTEP 2.0', 'SolidWorks 2024', FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));

ENDSEC;

DATA;

#1 = VECTOR ( 'NONE', #4086, 39.37007874015748143 ) ;

#2 = ORIENTED_EDGE ( 'NONE', *, *, #9438, .T. ) ;

#3 = ORIENTED_EDGE ( 'NONE', *, *, #5628, .F. ) ;

#4 = CARTESIAN_POINT ( 'NONE', ( -16.75000000000000355, 5.437499999999989342, 4.125000000000000000 ) ) ;

#5 = AXIS2_PLACEMENT_3D ( 'NONE', #4383, #3292, #7712 ) ;

#6 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;

#7 = ORIENTED_EDGE ( 'NONE', *, *, #676, .F. ) ;

#8 = VECTOR ( 'NONE', #7241, 39.37007874015748143 ) ;

#9 = FACE_OUTER_BOUND ( 'NONE', #4436, .T. ) ;

#10 = EDGE_CURVE ( 'NONE', #11733, #4678, #9360, .T. ) ;

#11 = FACE_OUTER_BOUND ( 'NONE', #1163, .T. ) ;

#12 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;

#13 = ORIENTED_EDGE ( 'NONE', *, *, #28, .F. ) ;

#14 = ORIENTED_EDGE ( 'NONE', *, *, #9117, .T. ) ;

#15 = CIRCLE ( 'NONE', #256, 1.125000000000000000 ) ;

#16 = CARTESIAN_POINT ( 'NONE', ( 16.75000000000000355, 8.874999999999989342, 4.125000000000000000 ) ) ;

#17 = ORIENTED_EDGE ( 'NONE', *, *, #9143, .T. ) ;

#18 = AXIS2_PLACEMENT_3D ( 'NONE', #13954, #7431, #898 ) ;

#19 = EDGE_CURVE ( 'NONE', #11421, #14353, #3911, .T. ) ;

#20 = AXIS2_PLACEMENT_3D ( 'NONE', #11916, #9599, #5306 ) ;

#21 = CIRCLE ( 'NONE', #8121, 1.125000000000000666 ) ;

#22 = EDGE_LOOP ( 'NONE', ( #9769, #7836, #1189, #12150 ) ) ;

#23 = LINE ( 'NONE', #3366, #310 ) ;

#24 = AXIS2_PLACEMENT_3D ( 'NONE', #8192, #11604, #10594 ) ;

#25 = AXIS2_PLACEMENT_3D ( 'NONE', #11974, #1959, #14004 ) ;

#26 = EDGE_CURVE ( 'NONE', #5747, #12558, #657, .T. ) ;

#27 = ORIENTED_EDGE ( 'NONE', *, *, #9076, .T. ) ;

#28 = EDGE_CURVE ( 'NONE', #3850, #5810, #8059, .T. ) ;

#29 = PLANE ( 'NONE', #14182 ) ;

#30 = CARTESIAN_POINT ( 'NONE', ( 0.2500000000000003886, -16.18749999999999645, 4.062500000000000000 ) ) ;

#31 = ORIENTED_EDGE ( 'NONE', *, *, #7096, .T. ) ;

#32 = ORIENTED_EDGE ( 'NONE', *, *, #8705, .T. ) ;

#33 = CARTESIAN_POINT ( 'NONE', ( -20.17424100183201574, -1.749999999999990896, 4.125000000000000000 ) ) ;

#34 = ORIENTED_EDGE ( 'NONE', *, *, #1258, .F. ) ;

#35 = EDGE_CURVE ( 'NONE', #2385, #8119, #2498, .T. ) ;

#36 = CARTESIAN_POINT ( 'NONE', ( -9.250000000000001776, 12.56249999999999112, 4.375000000000000000 ) ) ;

#37 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #7634, .NOT_KNOWN. ) ;

#38 = PLANE ( 'NONE', #3842 ) ;

#39 = LINE ( 'NONE', #11065, #8333 ) ;

#40 = FACE_BOUND ( 'NONE', #6413, .T. ) ;

#41 = EDGE_CURVE ( 'NONE', #10266, #11783, #9508, .T. ) ;

#42 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.000000000000000000, -0.000000000000000000 ) ) ;

#43 = DIRECTION ( 'NONE', ( -0.000000000000000000, -0.000000000000000000, 1.000000000000000000 ) ) ;

#45 = ADVANCED_FACE ( 'NONE', ( #3847 ), #8199, .T. ) ;

#44 = EDGE_CURVE ( 'NONE', #1964, #1599, #2974, .T. ) ;

#46 = ORIENTED_EDGE ( 'NONE', *, *, #14148, .F. ) ;

#47 = CARTESIAN_POINT ( 'NONE', ( 12.42980289465605992, -17.31249999999999289, 4.375000000000000000 ) ) ;

#48 = ORIENTED_EDGE ( 'NONE', *, *, #12453, .F. ) ;

#49 = EDGE_CURVE ( 'NONE', #8724, #8723, #7181, .T. ) ;

#50 = ORIENTED_EDGE ( 'NONE', *, *, #7508, .T. ) ;

#51 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.516504769481407987E-15, 0.000000000000000000 ) ) ;

#52 = CARTESIAN_POINT ( 'NONE', ( -12.56980508997654233, 17.74999999999999289, 4.062500000000000000 ) ) ;

#53 = CARTESIAN_POINT ( 'NONE', ( 9.250000000000000000, -16.24999999999998934, 4.375000000000000000 ) ) ;

#54 = FACE_OUTER_BOUND ( 'NONE', #2897, .T. ) ;

#55 = VECTOR ( 'NONE', #11027, 39.37007874015748143 ) ;

#56 = CARTESIAN_POINT ( 'NONE', ( -13.00000000000000000, -12.81249999999998934, 4.375000000000000000 ) ) ;

#57 = DIRECTION ( 'NONE', ( 0.000000000000000000, 1.000000000000000000, 0.000000000000000000 ) ) ;

#58 = DIRECTION ( 'NONE', ( -0.000000000000000000, -0.000000000000000000, 1.000000000000000000 ) ) ;

#59 = LINE ( 'NONE', #1071, #6023 ) ;

#60 = ADVANCED_FACE ( 'NONE', ( #12773 ), #9215, .F. ) ;

#61 = ORIENTED_EDGE ( 'NONE', *, *, #11522, .T. ) ;

#62 = VERTEX_POINT ( 'NONE', #13640 ) ;

#63 = LINE ( 'NONE', #9860, #4031 ) ;

#64 = VECTOR ( 'NONE', #849, 39.37007874015748143 ) ;

#65 = ORIENTED_EDGE ( 'NONE', *, *, #2940, .F. ) ;

#66 = DIRECTION ( 'NONE', ( -0.000000000000000000, -0.000000000000000000, 1.000000000000000000 ) ) ;

#67 = CARTESIAN_POINT ( 'NONE', ( 20.10596926288309660, -1.812500000000000222, 4.062500000000000000 ) ) ;

#68 = CARTESIAN_POINT ( 'NONE', ( 13.00000000000000178, -5.437499999999989342, 4.125000000000000000 ) ) ;

#69 = ORIENTED_EDGE ( 'NONE', *, *, #6231, .F. ) ;

#70 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;

#71 = CARTESIAN_POINT ( 'NONE', ( -18.07752402847248874, 9.124999999999989342, 4.125000000000000000 ) ) ;

#72 = DIRECTION ( 'NONE', ( 0.000000000000000000, 1.000000000000000000, 0.000000000000000000 ) ) ;

#73 = ORIENTED_EDGE ( 'NONE', *, *, #4506, .T. ) ;

#74 = DIRECTION ( 'NONE', ( 0.000000000000000000, -1.000000000000000000, 0.000000000000000000 ) ) ;

#75 = CARTESIAN_POINT ( 'NONE', ( -9.250000000000000000, 16.24999999999998934, 4.375000000000000000 ) ) ;

#76 = PLANE ( 'NONE', #3785 ) ;

#77 = VECTOR ( 'NONE', #6769, 39.37007874015748143 ) ;

#78 = DIRECTION ( 'NONE', ( 0.000000000000000000, -1.000000000000000000, 0.000000000000000000 ) ) ;

#79 = AXIS2_PLACEMENT_3D ( 'NONE', #14319, #7802, #12513 ) ;

#80 = EDGE_CURVE ( 'NONE', #4458, #3716, #1657, .T. ) ;

#81 = VERTEX_POINT ( 'NONE', #2685 ) ;

#82 = EDGE_LOOP ( 'NONE', ( #1521, #3296, #8533, #1984 ) ) ;

#83 = LINE ( 'NONE', #8048, #3778 ) ;

#84 = CARTESIAN_POINT ( 'NONE', ( 16.74999999999999645, 11.37980667674104218, 4.125000000000000000 ) ) ;

#85 = ORIENTED_EDGE ( 'NONE', *, *, #13583, .T. ) ;

#86 = VECTOR ( 'NONE', #2257, 39.37007874015748143 ) ;

#87 = LINE ( 'NONE', #4515, #11155 ) ;

#88 = PLANE ( 'NONE', #2390 ) ;

#89 = CARTESIAN_POINT ( 'NONE', ( 12.75000000000000355, -5.437499999999990230, 4.125000000000000000 ) ) ;

#90 = ORIENTED_EDGE ( 'NONE', *, *, #218, .T. ) ;

#91 = AXIS2_PLACEMENT_3D ( 'NONE', #8272, #13859, #7339 ) ;

#92 = ADVANCED_FACE ( 'NONE', ( #9434 ), #1740, .F. ) ;

#93 = ORIENTED_EDGE ( 'NONE', *, *, #13678, .F. ) ;

#94 = AXIS2_PLACEMENT_3D ( 'NONE', #13353, #10092, #2244 ) ;

#95 = STYLED_ITEM ( 'NONE', ( #2207 ), #4558 ) ;

#96 = FACE_BOUND ( 'NONE', #1887, .T. ) ;

#97 = ORIENTED_EDGE ( 'NONE', *, *, #703, .F. ) ;

#98 = VERTEX_POINT ( 'NONE', #436 ) ;

#99 = VECTOR ( 'NONE', #4208, 39.37007874015748143 ) ;

#100 = VECTOR ( 'NONE', #2821, 39.37007874015748143 ) ;

#101 = VERTEX_POINT ( 'NONE', #4861 ) ;

#102 = LINE ( 'NONE', #4527, #3326 ) ;

#103 = EDGE_LOOP ( 'NONE', ( #4365, #5208, #5239, #1387 ) ) ;

#104 = LINE ( 'NONE', #3218, #77 ) ;

#105 = DIRECTION ( 'NONE', ( -0.000000000000000000, -0.000000000000000000, 1.000000000000000000 ) ) ;

#106 = EDGE_LOOP ( 'NONE', ( #4417, #13130, #4151, #13863 ) ) ;

#107 = ORIENTED_EDGE ( 'NONE', *, *, #13601, .F. ) ;

#108 = PLANE ( 'NONE', #8102 ) ;

#109 = EDGE_LOOP ( 'NONE', ( #10216, #10794, #6657, #9010 ) ) ;

#110 = FACE_OUTER_BOUND ( 'NONE', #13507, .T. ) ;

#111 = CYLINDRICAL_SURFACE ( 'NONE', #8714, 1.562500000000000000 ) ;

#112 = CARTESIAN_POINT ( 'NONE', ( -9.000000000000001776, -5.437499999999990230, 4.375000000000000000 ) ) ;

#113 = AXIS2_PLACEMENT_3D ( 'NONE', #11534, #3846, #13578 ) ;

#114 = FACE_OUTER_BOUND ( 'NONE', #5690, .T. ) ;

#115 = ADVANCED_FACE ( 'NONE', ( #9286 ), #14215, .T. ) ;

#116 = DIRECTION ( 'NONE', ( 2.536715994116816462E-17, 1.000000000000000000, 0.000000000000000000 ) ) ;

#117 = LINE ( 'NONE', #2060, #10497 ) ;

#118 = ADVANCED_FACE ( 'NONE', ( #12037 ), #2980, .F. ) ;

#119 = EDGE_LOOP ( 'NONE', ( #14138, #6105, #11730, #983 ) ) ;

#120 = LINE ( 'NONE', #13177, #1751 ) ;

#121 = VECTOR ( 'NONE', #6229, 39.37007874015748143 ) ;

#122 = EDGE_LOOP ( 'NONE', ( #4215, #8603, #12743, #4368 ) ) ;

#123 = ORIENTED_EDGE ( 'NONE', *, *, #13638, .F. ) ;

#124 = CARTESIAN_POINT ( 'NONE', ( 13.00000000000000178, -12.56249999999999112, 4.375000000000000000 ) ) ;

#125 = EDGE_CURVE ( 'NONE', #6129, #12249, #12994, .T. ) ;

#126 = FACE_OUTER_BOUND ( 'NONE', #10283, .T. ) ;

#127 = LINE ( 'NONE', #2363, #2872 ) ;

#128 = CARTESIAN_POINT ( 'NONE', ( 12.56980508997654233, -17.74999999999999289, 4.375000000000000000 ) ) ;

#129 = CARTESIAN_POINT ( 'NONE', ( 12.75000000000000355, 9.124999999999989342, 4.125000000000000000 ) ) ;

#130 = FACE_BOUND ( 'NONE', #2296, .T. ) ;

#131 = CARTESIAN_POINT ( 'NONE', ( 13.00000000000000178, 5.187499999999992006, 4.125000000000000000 ) ) ;

#132 = ADVANCED_FACE ( 'NONE', ( #3129 ), #5154, .T. ) ;

#133 = CARTESIAN_POINT ( 'NONE', ( 16.50000000000000000, -5.187499999999992006, 4.125000000000000000 ) ) ;

#134 = VECTOR ( 'NONE', #196, 39.37007874015748143 ) ;

#135 = ORIENTED_EDGE ( 'NONE', *, *, #11768, .T. ) ;

#136 = ORIENTED_EDGE ( 'NONE', *, *, #6483, .F. ) ;

#137 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;

#138 = ORIENTED_EDGE ( 'NONE', *, *, #904, .F. ) ;

#139 = CARTESIAN_POINT ( 'NONE', ( -13.00000000000000178, -5.187499999999992006, 4.375000000000000000 ) ) ;

#140 = LINE ( 'NONE', #11240, #9606 ) ;

#141 = CARTESIAN_POINT ( 'NONE', ( -9.250000000000000000, 12.81249999999998934, 4.125000000000000000 ) ) ;

#142 = VERTEX_POINT ( 'NONE', #7473 ) ;

#143 = VERTEX_POINT ( 'NONE', #4212 ) ;

#144 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000001776, -5.437499999999990230, 4.125000000000000000 ) ) ;

#145 = CARTESIAN_POINT ( 'NONE', ( -9.250000000000001776, 8.874999999999991118, 4.125000000000000000 ) ) ;

#146 = CARTESIAN_POINT ( 'NONE', ( -1.750000000000000222, -8.874999999999991118, 4.125000000000000000 ) ) ;

#147 = ORIENTED_EDGE ( 'NONE', *, *, #892, .T. ) ;

#148 = CIRCLE ( 'NONE', #8237, 21.31249999999999645 ) ;

#149 = CARTESIAN_POINT ( 'NONE', ( -12.06233808181482026, -16.18749999999999289, 4.375000000000000000 ) ) ;

#150 = CARTESIAN_POINT ( 'NONE', ( 0.000000000000000000, 0.000000000000000000, 4.375000000000000000 ) ) ;

#151 = DIRECTION ( 'NONE', ( 0.000000000000000000, 0.000000000000000000, 1.000000000000000000 ) ) ;

#152 = VECTOR ( 'NONE', #11935, 39.37007874015748143 ) ;

#153 = CARTESIAN_POINT ( 'NONE', ( -5.500000000000001776, 5.187499999999992006, 4.125000000000000000 ) ) ;

#154 = VECTOR ( 'NONE', #14192, 39.37007874015748143 ) ;

#155 = ORIENTED_EDGE ( 'NONE', *, *, #8455, .F. ) ;

#156 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.000000000000000000, -0.000000000000000000 ) ) ;

#157 = FACE_OUTER_BOUND ( 'NONE', #106, .T. ) ;

#158 = LINE ( 'NONE', #4583, #6278 ) ;

#159 = DIRECTION ( 'NONE', ( 0.000000000000000000, 0.000000000000000000, 1.000000000000000000 ) ) ;

#160 = CARTESIAN_POINT ( 'NONE', ( -1.749999999999999556, -16.24999999999998934, 4.125000000000000000 ) ) ;

#161 = ORIENTED_EDGE ( 'NONE', *, *, #13565, .F. ) ;

#162 = EDGE_CURVE ( 'NONE', #409, #1899, #6385, .T. ) ;

#163 = FACE_BOUND ( 'NONE', #10737, .T. ) ;

#164 = VERTEX_POINT ( 'NONE', #11756 ) ;

#165 = EDGE_CURVE ( 'NONE', #12127, #3716, #732, .T. ) ;

#166 = ORIENTED_EDGE ( 'NONE', *, *, #6922, .F. ) ;

#167 = ORIENTED_EDGE ( 'NONE', *, *, #11217, .T. ) ;

#168 = DIRECTION ( 'NONE', ( 0.000000000000000000, -0.000000000000000000, 1.000000000000000000 ) ) ;

#169 = ORIENTED_EDGE ( 'NONE', *, *, #12758, .T. ) ;

#170 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;

#171 = ADVANCED_FACE ( 'NONE', ( #11901 ), #10880, .T. ) ;

#172 = CARTESIAN_POINT ( 'NONE', ( 1.750000000000001110, -5.437499999999990230, 4.125000000000000000 ) ) ;

#173 = ORIENTED_EDGE ( 'NONE', *, *, #10998, .F. ) ;

#174 = ORIENTED_EDGE ( 'NONE', *, *, #12042, .F. ) ;

#175 = DIRECTION ( 'NONE', ( -0.000000000000000000, -0.000000000000000000, 1.000000000000000000 ) ) ;

#176 = ORIENTED_EDGE ( 'NONE', *, *, #4248, .F. ) ;

#177 = EDGE_CURVE ( 'NONE', #3117, #4399, #7613, .T. ) ;

#178 = FACE_BOUND ( 'NONE', #248, .T. ) ;

#179 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000000000, 12.81249999999998934, 4.375000000000000000 ) ) ;

#180 = ADVANCED_FACE ( 'NONE', ( #6455 ), #6525, .F. ) ;

#181 = FACE_BOUND ( 'NONE', #13066, .T. ) ;

#182 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;

#183 = VECTOR ( 'NONE', #2083, 39.37007874015748143 ) ;

#184 = ADVANCED_FACE ( 'NONE', ( #944 ), #5371, .T. ) ;

#185 = DIRECTION ( 'NONE', ( 1.000000000000000000, 2.384158249016083860E-16, 0.000000000000000000 ) ) ;

#186 = VERTEX_POINT ( 'NONE', #14069 ) ;

#187 = DIRECTION ( 'NONE', ( -0.000000000000000000, -0.000000000000000000, 1.000000000000000000 ) ) ;

#188 = ORIENTED_EDGE ( 'NONE', *, *, #10367, .T. ) ;

#189 = ORIENTED_EDGE ( 'NONE', *, *, #11502, .F. ) ;

#190 = CARTESIAN_POINT ( 'NONE', ( 0.000000000000000000, 0.000000000000000000, 4.375000000000000000 ) ) ;

#191 = DIRECTION ( 'NONE', ( 0.000000000000000000, -0.000000000000000000, 1.000000000000000000 ) ) ;

#192 = ADVANCED_FACE ( 'NONE', ( #1816 ), #10819, .T. ) ;

#193 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999999778, -1.500000000000000444, 4.375000000000000000 ) ) ;

#194 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999999112, 12.81249999999998934, 4.125000000000000000 ) ) ;

#195 = APPLICATION_CONTEXT ( 'automotive_design' ) ;

#196 = DIRECTION ( 'NONE', ( -0.000000000000000000, -0.000000000000000000, 1.000000000000000000 ) ) ;

#197 = FACE_BOUND ( 'NONE', #14163, .T. ) ;

#198 = DIRECTION ( 'NONE', ( -0.000000000000000000, -0.000000000000000000, 1.000000000000000000 ) ) ;

#199 = ADVANCED_FACE ( 'NONE', ( #9726 ), #8707, .T. ) ;

#200 = VECTOR ( 'NONE', #3319, 39.37007874015748143 ) ;

#201 = FACE_BOUND ( 'NONE', #3048, .T. ) ;

#202 = VERTEX_POINT ( 'NONE', #2910 ) ;

#203 = ORIENTED_EDGE ( 'NONE', *, *, #5116, .T. ) ;

#204 = CARTESIAN_POINT ( 'NONE', ( -12.75000000000000355, 1.749999999999990896, 4.125000000000000000 ) ) ;

#205 = VERTEX_POINT ( 'NONE', #5448 ) ;

#206 = LINE ( 'NONE', #8841, #10837 ) ;

#207 = CARTESIAN_POINT ( 'NONE', ( -18.20156243293416409, 8.874999999999989342, 4.375000000000000000 ) ) ;

#208 = CARTESIAN_POINT ( 'NONE', ( -5.250000000000000000, 8.874999999999991118, 4.125000000000000000 ) ) ;

#209 = VERTEX_POINT ( 'NONE', #7333 ) ;

#210 = ADVANCED_FACE ( 'NONE', ( #6233 ), #3055, .T. ) ;

#211 = CARTESIAN_POINT ( 'NONE', ( -13.00000000000000178, 9.124999999999989342, 4.375000000000000000 ) ) ;

#212 = CARTESIAN_POINT ( 'NONE', ( 21.66846926288309660, 1.812500000000000222, 4.062500000000000000 ) ) ;

#213 = CARTESIAN_POINT ( 'NONE', ( -1.750000000000000222, 5.187499999999992006, 4.125000000000000000 ) ) ;

#214 = ORIENTED_EDGE ( 'NONE', *, *, #6625, .T. ) ;

#215 = FACE_OUTER_BOUND ( 'NONE', #7554, .T. ) ;

#216 = CARTESIAN_POINT ( 'NONE', ( -5.500000000000000888, 8.874999999999991118, 4.125000000000000000 ) ) ;

#217 = PLANE ( 'NONE', #4731 ) ;

#218 = EDGE_CURVE ( 'NONE', #9815, #12745, #13298, .T. ) ;

#219 = CARTESIAN_POINT ( 'NONE', ( 0.000000000000000000, 0.000000000000000000, 4.375000000000000000 ) ) ;

#220 = ORIENTED_EDGE ( 'NONE', *, *, #368, .F. ) ;

#221 = EDGE_LOOP ( 'NONE', ( #10451, #9890, #3739, #13801 ) ) ;

#222 = CARTESIAN_POINT ( 'NONE', ( -9.250000000000001776, 12.56249999999999112, 4.375000000000000000 ) ) ;

#223 = LINE ( 'NONE', #9075, #2633 ) ;

#224 = EDGE_CURVE ( 'NONE', #6285, #4561, #1088, .T. ) ;

#225 = FACE_OUTER_BOUND ( 'NONE', #7690, .T. ) ;

#226 = DIRECTION ( 'NONE', ( 0.000000000000000000, -0.000000000000000000, 1.000000000000000000 ) ) ;

#227 = CARTESIAN_POINT ( 'NONE', ( -12.75000000000000355, -5.187499999999992006, 4.125000000000000000 ) ) ;

#228 = ORIENTED_EDGE ( 'NONE', *, *, #389, .T. ) ;

#229 = AXIS2_PLACEMENT_3D ( 'NONE', #13540, #2287, #11151 ) ;

#230 = ADVANCED_FACE ( 'NONE', ( #1309 ), #1157, .T. ) ;

#231 = FACE_BOUND ( 'NONE', #10455, .T. ) ;

#232 = ORIENTED_EDGE ( 'NONE', *, *, #6836, .F. ) ;

#233 = AXIS2_PLACEMENT_3D ( 'NONE', #5566, #6796, #11230 ) ;

#234 = ORIENTED_EDGE ( 'NONE', *, *, #3362, .F. ) ;

#235 = VECTOR ( 'NONE', #13491, 39.37007874015748143 ) ;

#236 = VECTOR ( 'NONE', #105, 39.37007874015748143 ) ;

#237 = EDGE_CURVE ( 'NONE', #12444, #7459, #6820, .T. ) ;

#238 = VECTOR ( 'NONE', #13882, 39.37007874015748143 ) ;

#239 = ORIENTED_EDGE ( 'NONE', *, *, #1419, .T. ) ;

#240 = ADVANCED_FACE ( 'NONE', ( #8851 ), #217, .T. ) ;

#241 = ORIENTED_EDGE ( 'NONE', *, *, #10111, .F. ) ;

#242 = ORIENTED_EDGE ( 'NONE', *, *, #1036, .T. ) ;

#243 = CARTESIAN_POINT ( 'NONE', ( 0.000000000000000000, 0.000000000000000000, 4.375000000000000000 ) ) ;

#244 = VECTOR ( 'NONE', #11385, 39.37007874015748143 ) ;

#245 = CARTESIAN_POINT ( 'NONE', ( 13.00000000000000178, 8.874999999999989342, 4.375000000000000000 ) ) ;

#246 = VECTOR ( 'NONE', #5248, 39.37007874015748143 ) ;

#247 = CARTESIAN_POINT ( 'NONE', ( 21.23096926288309660, 1.812499999999999778, 4.062500000000000000 ) ) ;

#248 = EDGE_LOOP ( 'NONE', ( #7585, #6940, #11324, #1242, #6617, #7716, #4293, #7018 ) ) ;

#249 = VERTEX_POINT ( 'NONE', #6890 ) ;

#250 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;

#251 = ORIENTED_EDGE ( 'NONE', *, *, #7280, .F. ) ;

#252 = AXIS2_PLACEMENT_3D ( 'NONE', #3356, #4517, #9952 ) ;

#253 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );

#254 = CARTESIAN_POINT ( 'NONE', ( -5.500000000000001776, 1.749999999999990896, 4.125000000000000000 ) ) ;

#255 = CYLINDRICAL_SURFACE ( 'NONE', #4405, 21.74999999999999645 ) ;

#256 = AXIS2_PLACEMENT_3D ( 'NONE', #6797, #12396, #10143 ) ;

#257 = ADVANCED_FACE ( 'NONE', ( #12341 ), #5665, .F. ) ;

#258 = DIRECTION ( 'NONE', ( -0.000000000000000000, -0.000000000000000000, 1.000000000000000000 ) ) ;

#259 = VERTEX_POINT ( 'NONE', #3343 ) ;

#260 = ADVANCED_FACE ( 'NONE', ( #3484 ), #76, .F. ) ;

#261 = CARTESIAN_POINT ( 'NONE', ( -9.250000000000001776, 5.187499999999992006, 4.125000000000000000 ) ) ;

#262 = ORIENTED_EDGE ( 'NONE', *, *, #10956, .T. ) ;

#263 = ORIENTED_EDGE ( 'NONE', *, *, #1513, .F. ) ;

#264 = DIRECTION ( 'NONE', ( 0.000000000000000000, 0.000000000000000000, -1.000000000000000000 ) ) ;

#265 = CARTESIAN_POINT ( 'NONE', ( -12.06233808181482381, -17.31249999999999289, 4.062500000000000000 ) ) ;

#266 = DIRECTION ( 'NONE', ( -0.000000000000000000, -0.000000000000000000, 1.000000000000000000 ) ) ;

#267 = ADVANCED_FACE ( 'NONE', ( #12264 ), #14351, .T. ) ;

#268 = CARTESIAN_POINT ( 'NONE', ( 0.6875000000000000000, 1.812499999999999778, 4.062500000000000000 ) ) ;

#269 = VECTOR ( 'NONE', #7265, 39.37007874015748143 ) ;

#270 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.000000000000000000, -0.000000000000000000 ) ) ;

#271 = CARTESIAN_POINT ( 'NONE', ( 1.750000000000000222, 8.874999999999991118, 4.125000000000000000 ) ) ;

#272 = FACE_OUTER_BOUND ( 'NONE', #12024, .T. ) ;

#273 = CARTESIAN_POINT ( 'NONE', ( 0.000000000000000000, 0.000000000000000000, 4.375000000000000000 ) ) ;

#274 = ORIENTED_EDGE ( 'NONE', *, *, #1144, .T. ) ;

#275 = VERTEX_POINT ( 'NONE', #5516 ) ;

#276 = CARTESIAN_POINT ( 'NONE', ( 16.75000000000000355, -5.437499999999989342, 4.375000000000000000 ) ) ;

#277 = VERTEX_POINT ( 'NONE', #11249 ) ;

#278 = CARTESIAN_POINT ( 'NONE', ( 9.000000000000003553, 1.749999999999990896, 4.125000000000000000 ) ) ;

#279 = ORIENTED_EDGE ( 'NONE', *, *, #3434, .F. ) ;

#280 = EDGE_CURVE ( 'NONE', #11200, #11394, #10162, .T. ) ;

#281 = CARTESIAN_POINT ( 'NONE', ( -9.125000000000003553, -8.999999999999989342, 0.000000000000000000 ) ) ;

#282 = DIRECTION ( 'NONE', ( -0.000000000000000000, 1.000000000000000000, -0.000000000000000000 ) ) ;

#283 = DIRECTION ( 'NONE', ( -2.384158249016083860E-16, -1.000000000000000000, 0.000000000000000000 ) ) ;

#284 = ORIENTED_EDGE ( 'NONE', *, *, #13706, .F. ) ;

#285 = FACE_OUTER_BOUND ( 'NONE', #9585, .T. ) ;

#286 = LINE ( 'NONE', #3623, #2429 ) ;

#287 = CARTESIAN_POINT ( 'NONE', ( -16.74999999999999645, -11.37980667674104218, 4.375000000000000000 ) ) ;

#288 = EDGE_CURVE ( 'NONE', #10899, #3311, #10315, .T. ) ;

#289 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;

#290 = AXIS2_PLACEMENT_3D ( 'NONE', #8405, #3694, #13779 ) ;

#291 = EDGE_CURVE ( 'NONE', #11288, #5301, #4431, .T. ) ;

#292 = VERTEX_POINT ( 'NONE', #4641 ) ;

#293 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;

#294 = CARTESIAN_POINT ( 'NONE', ( -5.500000000000000888, 8.874999999999991118, 4.375000000000000000 ) ) ;

#295 = EDGE_CURVE ( 'NONE', #438, #5097, #2313, .T. ) ;

#296 = DIRECTION ( 'NONE', ( -0.000000000000000000, -0.000000000000000000, 1.000000000000000000 ) ) ;

#297 = CARTESIAN_POINT ( 'NONE', ( 1.812500000000000222, 0.2500000000000000000, 4.375000000000000000 ) ) ;

#298 = LINE ( 'NONE', #1585, #11829 ) ;

#299 = EDGE_LOOP ( 'NONE', ( #2108, #13934, #682, #11085 ) ) ;

#300 = VECTOR ( 'NONE', #14242, 39.37007874015748143 ) ;

#301 = DIRECTION ( 'NONE', ( -0.000000000000000000, -0.000000000000000000, 1.000000000000000000 ) ) ;

#302 = EDGE_CURVE ( 'NONE', #9900, #164, #2465, .T. ) ;

#303 = ORIENTED_EDGE ( 'NONE', *, *, #1802, .F. ) ;

#304 = VECTOR ( 'NONE', #5627, 39.37007874015748143 ) ;

#305 = EDGE_LOOP ( 'NONE', ( #8477, #10462, #12937, #702 ) ) ;

#306 = EDGE_CURVE ( 'NONE', #12432, #3715, #4706, .T. ) ;

#307 = VECTOR ( 'NONE', #13575, 39.37007874015748143 ) ;

#308 = ORIENTED_EDGE ( 'NONE', *, *, #7994, .F. ) ;

#309 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;

#310 = VECTOR ( 'NONE', #891, 39.37007874015748143 ) ;

#311 = VECTOR ( 'NONE', #7451, 39.37007874015748143 ) ;

#312 = AXIS2_PLACEMENT_3D ( 'NONE', #11411, #6032, #2630 ) ;

#313 = DIRECTION ( 'NONE', ( -0.000000000000000000, -0.000000000000000000, 1.000000000000000000 ) ) ;

#314 = CARTESIAN_POINT ( 'NONE', ( -5.500000000000000000, 16.24999999999998934, 4.375000000000000000 ) ) ;

#315 = ORIENTED_EDGE ( 'NONE', *, *, #2284, .F. ) ;

#316 = EDGE_LOOP ( 'NONE', ( #13268, #3827, #8953, #13624 ) ) ;

#317 = DIRECTION ( 'NONE', ( 0.000000000000000000, -0.000000000000000000, 1.000000000000000000 ) ) ;

#318 = VERTEX_POINT ( 'NONE', #13275 ) ;

#319 = FACE_OUTER_BOUND ( 'NONE', #2111, .T. ) ;

#320 = AXIS2_PLACEMENT_3D ( 'NONE', #3967, #5990, #5130 ) ;

#321 = CARTESIAN_POINT ( 'NONE', ( -1.750000000000000666, 9.124999999999989342, 4.375000000000000000 ) ) ;

#322 = CIRCLE ( 'NONE', #10066, 0.1249999999999993477 ) ;

#323 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;

#324 = VECTOR ( 'NONE', #5720, 39.37007874015748143 ) ;

#325 = VECTOR ( 'NONE', #5841, 39.37007874015748143 ) ;

#326 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #7131 ) ;

#327 = EDGE_CURVE ( 'NONE', #8377, #9292, #10232, .T. ) ;

#328 = DIRECTION ( 'NONE', ( -0.000000000000000000, -0.000000000000000000, 1.000000000000000000 ) ) ;

#329 = ORIENTED_EDGE ( 'NONE', *, *, #340, .T. ) ;

#330 = ORIENTED_EDGE ( 'NONE', *, *, #2418, .T. ) ;

#331 = VECTOR ( 'NONE', #5723, 39.37007874015748143 ) ;

#332 = VERTEX_POINT ( 'NONE', #3268 ) ;

#333 = CARTESIAN_POINT ( 'NONE', ( 5.500000000000000888, -8.874999999999991118, 4.375000000000000000 ) ) ;

#334 = CYLINDRICAL_SURFACE ( 'NONE', #13204, 1.125000000000000222 ) ;

#335 = CARTESIAN_POINT ( 'NONE', ( 9.250000000000001776, -8.874999999999991118, 4.375000000000000000 ) ) ;

#336 = VECTOR ( 'NONE', #6454, 39.37007874015748143 ) ;

#337 = FACE_OUTER_BOUND ( 'NONE', #4237, .T. ) ;

#338 = LINE ( 'NONE', #9045, #1978 ) ;

#339 = CARTESIAN_POINT ( 'NONE', ( -12.64911064067351809, 17.99999999999999645, 4.375000000000000000 ) ) ;

#340 = EDGE_CURVE ( 'NONE', #6448, #14028, #12194, .T. ) ;

#341 = CARTESIAN_POINT ( 'NONE', ( 8.999999999999998224, 16.24999999999998934, 4.125000000000000000 ) ) ;

#342 = CARTESIAN_POINT ( 'NONE', ( -9.000000000000001776, 5.437499999999990230, 4.125000000000000000 ) ) ;

#343 = EDGE_CURVE ( 'NONE', #6958, #7273, #10016, .T. ) ;

#344 = AXIS2_PLACEMENT_3D ( 'NONE', #6125, #13672, #2716 ) ;

#345 = ORIENTED_EDGE ( 'NONE', *, *, #3058, .T. ) ;

#346 = VECTOR ( 'NONE', #1865, 39.37007874015748143 ) ;

#347 = VERTEX_POINT ( 'NONE', #424 ) ;

#348 = LINE ( 'NONE', #3741, #7962 ) ;

#349 = ORIENTED_EDGE ( 'NONE', *, *, #12045, .T. ) ;

#350 = EDGE_CURVE ( 'NONE', #3290, #8060, #10582, .T. ) ;

#351 = ORIENTED_EDGE ( 'NONE', *, *, #8620, .T. ) ;

#352 = PLANE ( 'NONE', #8509 ) ;

#353 = ORIENTED_EDGE ( 'NONE', *, *, #11103, .F. ) ;

#354 = VERTEX_POINT ( 'NONE', #5862 ) ;

#355 = PLANE ( 'NONE', #12344 ) ;

#356 = CARTESIAN_POINT ( 'NONE', ( 9.250000000000001776, -8.874999999999991118, 4.125000000000000000 ) ) ;

#357 = LINE ( 'NONE', #7090, #6841 ) ;

#358 = EDGE_LOOP ( 'NONE', ( #10714, #8589, #6134, #13162 ) ) ;

#359 = CARTESIAN_POINT ( 'NONE', ( -9.250000000000003553, 5.437499999999990230, 4.375000000000000000 ) ) ;

#360 = DIRECTION ( 'NONE', ( -0.000000000000000000, -0.000000000000000000, 1.000000000000000000 ) ) ;

#361 = LINE ( 'NONE', #10433, #5327 ) ;

#362 = CIRCLE ( 'NONE', #12637, 20.25000000000000000 ) ;

#363 = LINE ( 'NONE', #4922, #12523 ) ;

#364 = EDGE_CURVE ( 'NONE', #4669, #8112, #5995, .T. ) ;

#365 = VERTEX_POINT ( 'NONE', #9135 ) ;

#366 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.000000000000000000, -0.000000000000000000 ) ) ;

#367 = PLANE ( 'NONE', #1023 ) ;

#368 = EDGE_CURVE ( 'NONE', #5883, #8666, #2738, .T. ) ;

#369 = PLANE ( 'NONE', #9994 ) ;

#370 = VECTOR ( 'NONE', #6854, 39.37007874015748143 ) ;

#371 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999999334, -16.49999999999999289, 4.125000000000000000 ) ) ;

#372 = CARTESIAN_POINT ( 'NONE', ( 13.00000000000000000, 15.52618755522423655, 4.125000000000000000 ) ) ;

#373 = ORIENTED_EDGE ( 'NONE', *, *, #2770, .F. ) ;

#374 = DIRECTION ( 'NONE', ( -0.000000000000000000, -0.000000000000000000, 1.000000000000000000 ) ) ;

#375 = CARTESIAN_POINT ( 'NONE', ( 20.10596926288309660, -1.812500000000000222, 4.375000000000000000 ) ) ;

#376 = ADVANCED_FACE ( 'NONE', ( #10506 ), #12756, .T. ) ;

#377 = VECTOR ( 'NONE', #12744, 39.37007874015748143 ) ;

#378 = ORIENTED_EDGE ( 'NONE', *, *, #12774, .T. ) ;

#379 = EDGE_CURVE ( 'NONE', #860, #9330, #11520, .T. ) ;

#380 = CIRCLE ( 'NONE', #10583, 1.562500000000000000 ) ;

#381 = ORIENTED_EDGE ( 'NONE', *, *, #6952, .F. ) ;

#382 = VERTEX_POINT ( 'NONE', #13564 ) ;

#383 = PLANE ( 'NONE', #11902 ) ;

#384 = CARTESIAN_POINT ( 'NONE', ( -16.75000000000000355, -8.874999999999989342, 4.125000000000000000 ) ) ;

#385 = DIRECTION ( 'NONE', ( -0.000000000000000000, -0.000000000000000000, 1.000000000000000000 ) ) ;

#386 = EDGE_LOOP ( 'NONE', ( #7043, #3143, #11834, #10684 ) ) ;

#387 = ORIENTED_EDGE ( 'NONE', *, *, #2434, .T. ) ;

#388 = CARTESIAN_POINT ( 'NONE', ( 13.00000000000000178, 8.874999999999989342, 4.125000000000000000 ) ) ;

#389 = EDGE_CURVE ( 'NONE', #1305, #9301, #8043, .T. ) ;

#390 = ORIENTED_EDGE ( 'NONE', *, *, #13569, .F. ) ;

#391 = LINE ( 'NONE', #5829, #7027 ) ;

#392 = DIRECTION ( 'NONE', ( 0.000000000000000000, -0.000000000000000000, 1.000000000000000000 ) ) ;

#393 = CARTESIAN_POINT ( 'NONE', ( 9.250000000000001776, 12.56249999999999112, 4.125000000000000000 ) ) ;

#394 = FACE_OUTER_BOUND ( 'NONE', #10836, .T. ) ;

#395 = ORIENTED_EDGE ( 'NONE', *, *, #5297, .T. ) ;

#396 = ORIENTED_EDGE ( 'NONE', *, *, #12267, .T. ) ;

#397 = EDGE_LOOP ( 'NONE', ( #395, #8338, #10289 ) ) ;

#398 = LINE ( 'NONE', #1416, #11836 ) ;

#399 = CARTESIAN_POINT ( 'NONE', ( 15.88225719946633774, -12.56249999999998757, 4.125000000000000000 ) ) ;

#400 = CARTESIAN_POINT ( 'NONE', ( 12.16552506059644578, 16.49999999999999289, 4.375000000000000000 ) ) ;

#401 = EDGE_CURVE ( 'NONE', #9474, #4113, #12478, .T. ) ;

#402 = CARTESIAN_POINT ( 'NONE', ( -13.00000000000000000, 12.81249999999998934, 4.125000000000000000 ) ) ;

#403 = DIRECTION ( 'NONE', ( 0.000000000000000000, 1.000000000000000000, 0.000000000000000000 ) ) ;

#404 = PLANE ( 'NONE', #3443 ) ;

#405 = VECTOR ( 'NONE', #11443, 39.37007874015748143 ) ;

#406 = DIRECTION ( 'NONE', ( -9.692531149012535013E-16, -1.000000000000000000, 0.000000000000000000 ) ) ;

#407 = FACE_BOUND ( 'NONE', #9874, .T. ) ;

#408 = ORIENTED_EDGE ( 'NONE', *, *, #13706, .T. ) ;

#409 = VERTEX_POINT ( 'NONE', #10366 ) ;

#410 = DIRECTION ( 'NONE', ( -0.000000000000000000, -0.000000000000000000, 1.000000000000000000 ) ) ;

#411 = ADVANCED_FACE ( 'NONE', ( #12686 ), #2524, .F. ) ;

#412 = ORIENTED_EDGE ( 'NONE', *, *, #12834, .F. ) ;

#413 = EDGE_CURVE ( 'NONE', #5431, #5141, #11382, .T. ) ;

#414 = CARTESIAN_POINT ( 'NONE', ( -16.74999999999999645, -11.37980667674104218, 4.125000000000000000 ) ) ;

#415 = ORIENTED_EDGE ( 'NONE', *, *, #12083, .T. ) ;

#416 = ORIENTED_EDGE ( 'NONE', *, *, #13421, .T. ) ;

#417 = ORIENTED_EDGE ( 'NONE', *, *, #9068, .T. ) ;

#418 = CARTESIAN_POINT ( 'NONE', ( 16.75000000000000355, -8.874999999999989342, 4.125000000000000000 ) ) ;

#419 = CARTESIAN_POINT ( 'NONE', ( 9.250000000000001776, -5.187499999999992006, 4.125000000000000000 ) ) ;

#420 = FACE_OUTER_BOUND ( 'NONE', #8241, .T. ) ;

#421 = ORIENTED_EDGE ( 'NONE', *, *, #12055, .F. ) ;

#422 = FACE_OUTER_BOUND ( 'NONE', #1825, .T. ) ;

#423 = DIRECTION ( 'NONE', ( -3.178877665354778480E-16, -1.000000000000000000, 0.000000000000000000 ) ) ;

#424 = CARTESIAN_POINT ( 'NONE', ( 1.750000000000000222, -5.187499999999992006, 4.375000000000000000 ) ) ;

#425 = PLANE ( 'NONE', #3255 ) ;

#426 = ORIENTED_EDGE ( 'NONE', *, *, #6214, .T. ) ;

#427 = EDGE_CURVE ( 'NONE', #9967, #4533, #361, .T. ) ;

#428 = PLANE ( 'NONE', #8808 ) ;

#429 = LINE ( 'NONE', #1581, #1944 ) ;

#430 = ORIENTED_EDGE ( 'NONE', *, *, #1725, .F. ) ;

#431 = CARTESIAN_POINT ( 'NONE', ( -12.06233808181482026, 17.74999999999999289, 4.375000000000000000 ) ) ;

#432 = PLANE ( 'NONE', #10742 ) ;

#433 = CARTESIAN_POINT ( 'NONE', ( -5.500000000000000888, -12.56249999999999112, 4.125000000000000000 ) ) ;

#434 = EDGE_LOOP ( 'NONE', ( #6466, #11757, #8894, #14181 ) ) ;

#435 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;

#436 = CARTESIAN_POINT ( 'NONE', ( -9.250000000000001776, 8.999999999999989342, 4.125000000000000000 ) ) ;

#437 = EDGE_CURVE ( 'NONE', #13904, #13211, #3931, .T. ) ;

#438 = VERTEX_POINT ( 'NONE', #7234 ) ;

#439 = CARTESIAN_POINT ( 'NONE', ( 0.000000000000000000, 0.000000000000000000, 4.125000000000000000 ) ) ;

#440 = ADVANCED_FACE ( 'NONE', ( #3755 ), #8177, .T. ) ;

#441 = VERTEX_POINT ( 'NONE', #2596 ) ;

#442 = VECTOR ( 'NONE', #5972, 39.37007874015748143 ) ;

#443 = CARTESIAN_POINT ( 'NONE', ( 9.250000000000003553, -5.437499999999990230, 4.375000000000000000 ) ) ;

#444 = CARTESIAN_POINT ( 'NONE', ( -13.00000000000000178, -5.187499999999992006, 4.125000000000000000 ) ) ;

#445 = FACE_OUTER_BOUND ( 'NONE', #5464, .T. ) ;

#446 = ORIENTED_EDGE ( 'NONE', *, *, #6850, .T. ) ;

#447 = VERTEX_POINT ( 'NONE', #13627 ) ;

#448 = AXIS2_PLACEMENT_3D ( 'NONE', #14317, #6710, #5406 ) ;

#449 = EDGE_CURVE ( 'NONE', #9600, #7459, #11666, .T. ) ;

#450 = DIRECTION ( 'NONE', ( 0.000000000000000000, -1.000000000000000000, 0.000000000000000000 ) ) ;

#451 = ORIENTED_EDGE ( 'NONE', *, *, #8726, .T. ) ;

#452 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;

#453 = LINE ( 'NONE', #7274, #9873 ) ;

#454 = CIRCLE ( 'NONE', #5, 1.562500000000000000 ) ;

#455 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;

#456 = AXIS2_PLACEMENT_3D ( 'NONE', #7581, #974, #6487 ) ;

#457 = ORIENTED_EDGE ( 'NONE', *, *, #350, .T. ) ;

#458 = AXIS2_PLACEMENT_3D ( 'NONE', #6183, #13143, #10959 ) ;

#459 = EDGE_CURVE ( 'NONE', #7779, #7703, #8107, .T. ) ;

#460 = EDGE_CURVE ( 'NONE', #8561, #11276, #9419, .T. ) ;

#461 = AXIS2_PLACEMENT_3D ( 'NONE', #8005, #7053, #317 ) ;

#462 = CARTESIAN_POINT ( 'NONE', ( -12.73454268080140928, 17.08958978328172762, 4.062500000000000000 ) ) ;

#463 = ORIENTED_EDGE ( 'NONE', *, *, #9154, .F. ) ;

#464 = CARTESIAN_POINT ( 'NONE', ( 16.75000000000000355, 5.437499999999989342, 4.125000000000000000 ) ) ;

#465 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;

#466 = CIRCLE ( 'NONE', #10213, 21.74999999999999645 ) ;

#467 = VERTEX_POINT ( 'NONE', #11452 ) ;

#468 = ADVANCED_FACE ( 'NONE', ( #1510 ), #5931, .F. ) ;

#469 = ORIENTED_EDGE ( 'NONE', *, *, #12045, .F. ) ;

#470 = FACE_OUTER_BOUND ( 'NONE', #10424, .T. ) ;

#471 = CARTESIAN_POINT ( 'NONE', ( 9.125000000000003553, 8.999999999999989342, 4.125000000000000000 ) ) ;

#472 = CARTESIAN_POINT ( 'NONE', ( 9.250000000000003553, 5.437499999999990230, 4.125000000000000000 ) ) ;

#473 = CARTESIAN_POINT ( 'NONE', ( 9.250000000000001776, 8.999999999999989342, 0.000000000000000000 ) ) ;

#474 = AXIS2_PLACEMENT_3D ( 'NONE', #5717, #7814, #8833 ) ;

#475 = CARTESIAN_POINT ( 'NONE', ( -20.44504830026086850, 1.499999999999999334, 4.125000000000000000 ) ) ;

#476 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.000000000000000000, -0.000000000000000000 ) ) ;

#477 = EDGE_CURVE ( 'NONE', #4280, #8174, #9639, .T. ) ;

#478 = VECTOR ( 'NONE', #7873, 39.37007874015748143 ) ;

#479 = CARTESIAN_POINT ( 'NONE', ( 20.10596926288309660, 1.812499999999999778, 4.062500000000000000 ) ) ;

#480 = CARTESIAN_POINT ( 'NONE', ( -1.750000000000000000, -12.56249999999999112, 4.375000000000000000 ) ) ;

#482 = EDGE_CURVE ( 'NONE', #14081, #14281, #4192, .T. ) ;

#481 = EDGE_CURVE ( 'NONE', #7909, #12505, #14191, .T. ) ;

#483 = ORIENTED_EDGE ( 'NONE', *, *, #3074, .F. ) ;

#484 = ORIENTED_EDGE ( 'NONE', *, *, #8124, .F. ) ;

#485 = EDGE_CURVE ( 'NONE', #11535, #10791, #14055, .T. ) ;

#486 = CARTESIAN_POINT ( 'NONE', ( -13.00000000000000178, -12.56249999999999112, 4.125000000000000000 ) ) ;

#487 = ORIENTED_EDGE ( 'NONE', *, *, #9958, .F. ) ;

#488 = CARTESIAN_POINT ( 'NONE', ( -5.250000000000000000, -12.56249999999999112, 4.375000000000000000 ) ) ;

#489 = VERTEX_POINT ( 'NONE', #5281 ) ;

#490 = AXIS2_PLACEMENT_3D ( 'NONE', #13429, #8051, #2529 ) ;

#491 = ORIENTED_EDGE ( 'NONE', *, *, #9671, .F. ) ;

#492 = CARTESIAN_POINT ( 'NONE', ( 12.99595558040729948, -17.44040247678018218, 4.062500000000000000 ) ) ;

#493 = CARTESIAN_POINT ( 'NONE', ( 12.75000000000000355, -9.124999999999989342, 4.125000000000000000 ) ) ;

#494 = LINE ( 'NONE', #9338, #11465 ) ;

#495 = VERTEX_POINT ( 'NONE', #7453 ) ;

#496 = DIRECTION ( 'NONE', ( -0.000000000000000000, -0.000000000000000000, 1.000000000000000000 ) ) ;

#497 = LINE ( 'NONE', #13563, #4976 ) ;

#498 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.000000000000000000, -0.000000000000000000 ) ) ;

#499 = EDGE_CURVE ( 'NONE', #7417, #8660, #8472, .T. ) ;

#500 = LINE ( 'NONE', #3976, #5103 ) ;

#501 = ORIENTED_EDGE ( 'NONE', *, *, #2319, .T. ) ;

#502 = DIRECTION ( 'NONE', ( -3.178877665354778480E-16, -1.000000000000000000, 0.000000000000000000 ) ) ;

#503 = FACE_OUTER_BOUND ( 'NONE', #12657, .T. ) ;

#504 = VERTEX_POINT ( 'NONE', #8690 ) ;

#505 = DIRECTION ( 'NONE', ( -2.384158249016083860E-16, 1.000000000000000000, 0.000000000000000000 ) ) ;

#506 = CARTESIAN_POINT ( 'NONE', ( 1.750000000000001110, 5.437499999999990230, 4.375000000000000000 ) ) ;

#507 = CARTESIAN_POINT ( 'NONE', ( 13.00000000000000000, -12.81249999999998934, 4.375000000000000000 ) ) ;

#508 = ORIENTED_EDGE ( 'NONE', *, *, #3649, .F. ) ;

#509 = PLANE ( 'NONE', #14005 ) ;

#510 = DIRECTION ( 'NONE', ( 0.000000000000000000, 0.000000000000000000, 1.000000000000000000 ) ) ;

#511 = VECTOR ( 'NONE', #1811, 39.37007874015748143 ) ;

#512 = ORIENTED_EDGE ( 'NONE', *, *, #6313, .F. ) ;

#513 = ADVANCED_FACE ( 'NONE', ( #11883 ), #12972, .T. ) ;

#514 = CARTESIAN_POINT ( 'NONE', ( -13.00000000000000178, 5.187499999999992006, 4.125000000000000000 ) ) ;

#515 = EDGE_CURVE ( 'NONE', #11277, #9616, #9403, .T. ) ;

#516 = ORIENTED_EDGE ( 'NONE', *, *, #5775, .T. ) ;

#517 = ORIENTED_EDGE ( 'NONE', *, *, #1122, .T. ) ;

#518 = DIRECTION ( 'NONE', ( -0.000000000000000000, -0.000000000000000000, 1.000000000000000000 ) ) ;

#519 = EDGE_CURVE ( 'NONE', #6476, #11945, #10800, .T. ) ;

#520 = VECTOR ( 'NONE', #1041, 39.37007874015748143 ) ;

#521 = VECTOR ( 'NONE', #2360, 39.37007874015748143 ) ;

#522 = CARTESIAN_POINT ( 'NONE', ( 5.250000000000000000, 5.187499999999992006, 4.375000000000000000 ) ) ;

#523 = DIRECTION ( 'NONE', ( -0.000000000000000000, -0.000000000000000000, 1.000000000000000000 ) ) ;

#524 = DIRECTION ( 'NONE', ( 0.000000000000000000, -1.000000000000000000, 0.000000000000000000 ) ) ;

#525 = ORIENTED_EDGE ( 'NONE', *, *, #11874, .F. ) ;

#526 = VERTEX_POINT ( 'NONE', #13120 ) ;

#527 = CARTESIAN_POINT ( 'NONE', ( -9.250000000000003553, -1.749999999999990896, 4.375000000000000000 ) ) ;

#528 = VERTEX_POINT ( 'NONE', #4266 ) ;

#529 = LINE ( 'NONE', #11482, #13294 ) ;

#530 = CARTESIAN_POINT ( 'NONE', ( -16.50000000000000000, 5.187499999999992006, 4.375000000000000000 ) ) ;

#531 = CARTESIAN_POINT ( 'NONE', ( 20.10596926288309660, 1.812500000000000222, 4.375000000000000000 ) ) ;

#532 = VECTOR ( 'NONE', #6398, 39.37007874015748143 ) ;

#533 = CARTESIAN_POINT ( 'NONE', ( 0.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;

#534 = VECTOR ( 'NONE', #5534, 39.37007874015748143 ) ;

#535 = VECTOR ( 'NONE', #10081, 39.37007874015748143 ) ;

#536 = LINE ( 'NONE', #8360, #8167 ) ;

#537 = ORIENTED_EDGE ( 'NONE', *, *, #13741, .F. ) ;

#538 = PLANE ( 'NONE', #14002 ) ;

#539 = DIRECTION ( 'NONE', ( -0.000000000000000000, 1.000000000000000000, 0.000000000000000000 ) ) ;

#540 = VERTEX_POINT ( 'NONE', #13907 ) ;

#541 = VECTOR ( 'NONE', #282, 39.37007874015748143 ) ;

#542 = VERTEX_POINT ( 'NONE', #8613 ) ;

#543 = EDGE_LOOP ( 'NONE', ( #13155, #9931, #3993, #1709 ) ) ;

#544 = CYLINDRICAL_SURFACE ( 'NONE', #10671, 20.25000000000000000 ) ;

#545 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;

#546 = DIRECTION ( 'NONE', ( -0.000000000000000000, -0.000000000000000000, 1.000000000000000000 ) ) ;

#547 = AXIS2_PLACEMENT_3D ( 'NONE', #11124, #3215, #14162 ) ;

#548 = DIRECTION ( 'NONE', ( -8.231408050090536120E-16, -1.000000000000000000, 0.000000000000000000 ) ) ;

#549 = VECTOR ( 'NONE', #12476, 39.37007874015748143 ) ;

#550 = LINE ( 'NONE', #4978, #8474 ) ;

#551 = AXIS2_PLACEMENT_3D ( 'NONE', #12534, #3676, #7960 ) ;

#552 = DIRECTION ( 'NONE', ( 0.000000000000000000, -1.000000000000000000, 0.000000000000000000 ) ) ;

#553 = VECTOR ( 'NONE', #4027, 39.37007874015748143 ) ;

#554 = EDGE_CURVE ( 'NONE', #8119, #10356, #148, .T. ) ;

#555 = DIRECTION ( 'NONE', ( 0.000000000000000000, 1.000000000000000000, 0.000000000000000000 ) ) ;

#556 = LINE ( 'NONE', #10281, #5812 ) ;

#557 = VECTOR ( 'NONE', #1204, 39.37007874015748143 ) ;

#558 = ADVANCED_FACE ( 'NONE', ( #2009 ), #920, .T. ) ;

#559 = ORIENTED_EDGE ( 'NONE', *, *, #2310, .F. ) ;

#560 = VERTEX_POINT ( 'NONE', #6436 ) ;

#561 = AXIS2_PLACEMENT_3D ( 'NONE', #11892, #7392, #2084 ) ;

#562 = DIRECTION ( 'NONE', ( -0.000000000000000000, -0.000000000000000000, 1.000000000000000000 ) ) ;

#563 = VECTOR ( 'NONE', #13434, 39.37007874015748143 ) ;

#564 = ORIENTED_EDGE ( 'NONE', *, *, #11299, .T. ) ;

#565 = LINE ( 'NONE', #9126, #9911 ) ;

#566 = ORIENTED_EDGE ( 'NONE', *, *, #3059, .F. ) ;

#567 = VERTEX_POINT ( 'NONE', #2891 ) ;

#568 = LINE ( 'NONE', #7228, #8633 ) ;

#569 = DIRECTION ( 'NONE', ( 0.000000000000000000, -1.000000000000000000, 0.000000000000000000 ) ) ;

#570 = LINE ( 'NONE', #11662, #6133 ) ;

#571 = ORIENTED_EDGE ( 'NONE', *, *, #10316, .F. ) ;

#572 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.000000000000000000, -0.000000000000000000 ) ) ;

#573 = DIRECTION ( 'NONE', ( 0.000000000000000000, -1.000000000000000000, 0.000000000000000000 ) ) ;

#574 = ADVANCED_FACE ( 'NONE', ( #10646 ), #10864, .T. ) ;

#575 = CARTESIAN_POINT ( 'NONE', ( 18.07752402847248874, -9.124999999999989342, 4.125000000000000000 ) ) ;

#576 = AXIS2_PLACEMENT_3D ( 'NONE', #13880, #548, #7216 ) ;

#577 = DIRECTION ( 'NONE', ( 0.000000000000000000, -0.000000000000000000, 1.000000000000000000 ) ) ;

#578 = CIRCLE ( 'NONE', #5890, 20.25000000000000000 ) ;

#579 = VERTEX_POINT ( 'NONE', #11741 ) ;

#580 = CARTESIAN_POINT ( 'NONE', ( 0.000000000000000000, 0.000000000000000000, 4.375000000000000000 ) ) ;

#581 = DIRECTION ( 'NONE', ( -0.000000000000000000, -0.000000000000000000, 1.000000000000000000 ) ) ;

#582 = DIRECTION ( 'NONE', ( -6.357755330709556960E-16, -1.000000000000000000, 0.000000000000000000 ) ) ;

#583 = ORIENTED_EDGE ( 'NONE', *, *, #10991, .T. ) ;

#584 = CARTESIAN_POINT ( 'NONE', ( 5.250000000000000888, 9.124999999999989342, 4.375000000000000000 ) ) ;

#585 = PLANE ( 'NONE', #2850 ) ;

#586 = DIRECTION ( 'NONE', ( 2.384158249016083860E-16, 1.000000000000000000, 0.000000000000000000 ) ) ;

#587 = AXIS2_PLACEMENT_3D ( 'NONE', #11516, #1506, #6886 ) ;

#588 = EDGE_LOOP ( 'NONE', ( #1647, #2843, #1757, #12435 ) ) ;

#589 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;

#590 = CARTESIAN_POINT ( 'NONE', ( 20.44504830026086850, 1.499999999999999334, 4.125000000000000000 ) ) ;

#591 = VERTEX_POINT ( 'NONE', #1798 ) ;

#592 = CARTESIAN_POINT ( 'NONE', ( -1.750000000000000222, -5.187499999999992006, 4.125000000000000000 ) ) ;

#593 = VECTOR ( 'NONE', #12243, 39.37007874015748143 ) ;

#594 = VERTEX_POINT ( 'NONE', #6216 ) ;

#595 = VERTEX_POINT ( 'NONE', #5136 ) ;

#596 = CARTESIAN_POINT ( 'NONE', ( -9.000000000000001776, 8.874999999999991118, 4.125000000000000000 ) ) ;

#597 = EDGE_CURVE ( 'NONE', #1432, #5056, #13983, .T. ) ;

#598 = DIRECTION ( 'NONE', ( -1.000000000000000000, 3.178877665354778480E-16, 0.000000000000000000 ) ) ;

#599 = LINE ( 'NONE', #9444, #4924 ) ;

#600 = ADVANCED_FACE ( 'NONE', ( #2965 ), #11810, .F. ) ;

#601 = CARTESIAN_POINT ( 'NONE', ( -0.6875000000000000000, -0.6875000000000000000, 4.375000000000000000 ) ) ;

#602 = VERTEX_POINT ( 'NONE', #785 ) ;

#603 = ORIENTED_EDGE ( 'NONE', *, *, #8353, .T. ) ;

#604 = LINE ( 'NONE', #14018, #12982 ) ;

#605 = EDGE_LOOP ( 'NONE', ( #5848, #11126, #147, #13285, #9887, #8286, #7891, #2051 ) ) ;

#606 = PLANE ( 'NONE', #834 ) ;

#607 = CIRCLE ( 'NONE', #9168, 20.25000000000000000 ) ;

#608 = PLANE ( 'NONE', #13443 ) ;

#609 = ADVANCED_FACE ( 'NONE', ( #6725, #130, #13333, #9046, #197, #11082, #1209, #9852, #11157, #3396, #8977, #13403, #8906, #7668, #1135, #5564, #14269, #2446, #12094, #14331, #2146 ), #6871, .T. ) ;

#610 = LINE ( 'NONE', #10472, #2392 ) ;

#611 = VECTOR ( 'NONE', #12765, 39.37007874015748143 ) ;

#612 = ORIENTED_EDGE ( 'NONE', *, *, #10039, .F. ) ;

#613 = CARTESIAN_POINT ( 'NONE', ( -1.812499999999999778, -1.812499999999999778, 4.062500000000000000 ) ) ;

#614 = EDGE_CURVE ( 'NONE', #10079, #2540, #7812, .T. ) ;

#615 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.000000000000000000, -0.000000000000000000 ) ) ;

#616 = ORIENTED_EDGE ( 'NONE', *, *, #1081, .F. ) ;

#617 = VERTEX_POINT ( 'NONE', #8756 ) ;

#618 = DIRECTION ( 'NONE', ( -3.178877665354778480E-16, 1.000000000000000000, 0.000000000000000000 ) ) ;

#619 = CARTESIAN_POINT ( 'NONE', ( 13.00000000000000178, -5.187499999999992006, 4.125000000000000000 ) ) ;

#620 = DIRECTION ( 'NONE', ( 1.000000000000000000, 8.231408050090536120E-16, 0.000000000000000000 ) ) ;

#621 = CARTESIAN_POINT ( 'NONE', ( -12.75000000000000355, 1.749999999999990896, 4.125000000000000000 ) ) ;

#622 = CARTESIAN_POINT ( 'NONE', ( 12.75000000000000355, -1.749999999999990896, 4.125000000000000000 ) ) ;

#623 = DIRECTION ( 'NONE', ( 0.000000000000000000, 1.000000000000000000, 0.000000000000000000 ) ) ;

#624 = LINE ( 'NONE', #5267, #1150 ) ;

#625 = ADVANCED_FACE ( 'NONE', ( #4618 ), #5642, .T. ) ;

#626 = CARTESIAN_POINT ( 'NONE', ( -21.66215883431367573, 1.952786377708978671, 4.062500000000000000 ) ) ;

#627 = EDGE_LOOP ( 'NONE', ( #12277, #1185 ) ) ;

#628 = DIRECTION ( 'NONE', ( -0.000000000000000000, 1.000000000000000000, -0.000000000000000000 ) ) ;

#629 = EDGE_CURVE ( 'NONE', #4573, #7706, #13185, .T. ) ;

#630 = ORIENTED_EDGE ( 'NONE', *, *, #10261, .F. ) ;

#631 = CARTESIAN_POINT ( 'NONE', ( 1.750000000000000666, -9.124999999999989342, 4.375000000000000000 ) ) ;

#632 = ORIENTED_EDGE ( 'NONE', *, *, #2826, .F. ) ;

#633 = ORIENTED_EDGE ( 'NONE', *, *, #12526, .F. ) ;

#634 = LINE ( 'NONE', #11513, #11189 ) ;

#635 = LINE ( 'NONE', #1569, #3564 ) ;

#636 = PLANE ( 'NONE', #7995 ) ;

#637 = VERTEX_POINT ( 'NONE', #1287 ) ;

#638 = DIRECTION ( 'NONE', ( -0.000000000000000000, -0.000000000000000000, 1.000000000000000000 ) ) ;

#639 = EDGE_CURVE ( 'NONE', #10826, #6913, #6580, .T. ) ;

#640 = CARTESIAN_POINT ( 'NONE', ( 13.00000000000000178, -5.187499999999992006, 4.125000000000000000 ) ) ;

#641 = CARTESIAN_POINT ( 'NONE', ( -13.00000000000000178, -5.187499999999992006, 4.125000000000000000 ) ) ;

#642 = DIRECTION ( 'NONE', ( 0.000000000000000000, 1.000000000000000000, 0.000000000000000000 ) ) ;

#643 = ORIENTED_EDGE ( 'NONE', *, *, #8796, .F. ) ;

#644 = ORIENTED_EDGE ( 'NONE', *, *, #9679, .F. ) ;

#645 = EDGE_CURVE ( 'NONE', #11542, #10175, #7879, .T. ) ;

#646 = ORIENTED_EDGE ( 'NONE', *, *, #1108, .T. ) ;

#647 = DIRECTION ( 'NONE', ( -0.000000000000000000, 1.000000000000000000, -0.000000000000000000 ) ) ;

#648 = DIRECTION ( 'NONE', ( -1.000000000000000000, -8.359525855417707701E-16, 0.000000000000000000 ) ) ;

#649 = LINE ( 'NONE', #10658, #6873 ) ;

#650 = VERTEX_POINT ( 'NONE', #7953 ) ;

#651 = LINE ( 'NONE', #2678, #511 ) ;

#652 = FACE_OUTER_BOUND ( 'NONE', #10110, .T. ) ;

#653 = PLANE ( 'NONE', #7428 ) ;

#654 = EDGE_LOOP ( 'NONE', ( #12571, #7828, #4492, #3551 ) ) ;

#655 = EDGE_CURVE ( 'NONE', #12325, #13870, #5713, .T. ) ;

#656 = DIRECTION ( 'NONE', ( 0.000000000000000000, 0.000000000000000000, -1.000000000000000000 ) ) ;

#657 = LINE ( 'NONE', #7041, #4363 ) ;

#658 = VERTEX_POINT ( 'NONE', #4555 ) ;

#659 = ADVANCED_FACE ( 'NONE', ( #8831 ), #4481, .F. ) ;

#660 = DIRECTION ( 'NONE', ( 0.000000000000000000, 1.000000000000000000, 0.000000000000000000 ) ) ;

#661 = EDGE_CURVE ( 'NONE', #6453, #4496, #13256, .T. ) ;

#662 = ORIENTED_EDGE ( 'NONE', *, *, #8818, .F. ) ;

#663 = ORIENTED_EDGE ( 'NONE', *, *, #9610, .F. ) ;

#664 = FACE_OUTER_BOUND ( 'NONE', #1093, .T. ) ;

#665 = EDGE_CURVE ( 'NONE', #8377, #7113, #2367, .T. ) ;

#666 = VERTEX_POINT ( 'NONE', #7743 ) ;

#667 = FACE_OUTER_BOUND ( 'NONE', #103, .T. ) ;

#668 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.000000000000000000, 0.000000000000000000 ) ) ;

#669 = CARTESIAN_POINT ( 'NONE', (…