IRPOD SAMPLE_5120.pdf

This is an Individual Repair Part Ordering Data (IRPOD) document issued by Naval Sea Systems Command Washington DC for a packing extractor repair part. The national stock number is 1H 5120-01-483-4029 X3, with manufacturer's part number 820-7334201-1 and technical contract reference VS100F014A0127A, effective as of December 18, 2025.

The document specifies technical and quality requirements for manufacturing and delivering a single packing extractor component. All starting materials must be corrosion resistant, with zinc and cadmium plating prohibited. Mercury and mercury-containing compounds cannot be intentionally added or come into direct contact with hardware or supplies. Manufacturing must comply with MIL-PRF-23199 (Packaging and Packing Requirements for Special Purpose Mechanical Components and Repair Parts) and MIL-STD-792 (Identification Marking Requirements for Special Purpose Components), with marking and labeling per MIL-STD-129. Quality assurance requires sampling for inspection per MIL-STD-105 (referenced as ANSI/ASQ Z1.4) with acceptance quality level (AQL) of 4.0 defects per hundred units, with sampling at level I and lot size consisting of all tools offered at one time. The end item must undergo tension load and torque load testing, with inspection level S-2 and AQL of 2.5 for visual and dimensional defects. For electrochemical etching (Type II), certified test results must be submitted with each batch identifying the analysis method used. Preparation for delivery requires one tool fully prepared, with inspection level S-2 and 4.0 percent defective AQL. Packaging and marking shall comply with MIL-PRF-23199 and MIL-STD-129 respectively, with bar code marking suitable for hand scanning required on the IRPOD header, manufacturer's part number, and supplier's cage on the unit and intermediate pack. Prior to manufacture, the supplier must submit MIL-STD-792 procedures for approval, with specific exceptions for Type VI special marking and Type VIII laser engraving requiring qualification procedures and demonstration results.