Invitation and Specs for Bid #25-EQU-16.pdf

INVITATION TO BID

Bids will be received by the Board of County Road Commissioners of the County of Kent, 1900 4 Mile Road NW, Walker, Michigan 49544 until Tuesday, December 17, 2024, 8:30 AM deadline, at which time they will be publicly opened and read.

Bid #25-EQU-16: Fasteners

2025 Requirements, w/ a One-Year Renewal Option, As Needed

All vendors must register and submit their bid on KCRC’s Bidnet Direct site located at https://www.bidnetdirect.com/mitn/kentcountyroads and must be submitted prior to 8:30 AM on Tuesday, December 17, 2024.

If Bidnet Direct is not accessible for you to send KCRC your bid, and you require accommodations, please contact purchasing@kentcountyroads.net or (616) 242-6928. KCRC will work with you to make sure you have the opportunity to submit a bid.

The Board reserves the right to reject any and all bids or to waive irregularities therein, and to accept any bids which, in the opinion of the Board, may be most advantageous and to the best interest of the County. This contract will be considered for award on Tuesday, January 14, 2025.

BOARD OF COUNTY ROAD COMMISSIONERS

OF THE COUNTY OF KENT

By: Rob VerHeulen, Chair

If you plan to submit a bid, please acknowledge the receipt of this invitation to bid by emailing purchasing@kentcountyroads.net. This allows KCRC to be in contact with you for any future communication throughout the bid process.

https://www.bidnetdirect.com/mitn/kentcountyroads mailto:purchasing@kentcountyroads.net

INSTRUCTION TO BIDDERS

Bids will be opened at the offices of the Board of County Road Commissioners of the County of Kent, State of Michigan located at 1900 4 Mile Road NW, Walker, MI 49544.

Refer to the INVITATION TO BID for the exact timing and for the identification of the bid as related to furnishing materials, services, equipment, work and/or supplies with the terms, conditions, specifications, drawings, plans, and special provisions as stated herein and hereto attached.

The Kent County Road Commission’s process is to open and read the bids, and then refer the bids to Staff for tabulation and analysis. During this period, the files are closed until this action is complete. Copies of the bid tabulations are made available only once the review is complete, upon the request to Purchasing, by email at purchasing@kentcountyroads.net.

1. All bids must be submitted on the Board's bid pricing sheet that was provided. The bid shall be legibly prepared in ink or typed out. Erasures or alterations must be initialed by the respondent.

2. Specifications and plans should not be returned with bid, unless otherwise stated herein.

3. Bids shall be sent to KCRC through the BidNet Michigan Inter-governmental Trade

Network (MITN) at https://www.bidnetdirect.com/mitn/kentcountyroads. If that is not applicable for the bidder to submit their bid, please contact Purchasing for assistance.

4. KCRC officially distributes bid documents through the Michigan Intergovernmental Trade

Network (MITN). Copies of documents obtained from any other source are not considered official copies. Only those vendors who obtain documents from either KCRC Purchasing or the MITN system is guaranteed access to receive addendum information, if such information is issued.

5. Bids will not be accepted after the time designated for the opening of the bids. The respondent shall assume full responsibility for delivery of bids prior to the appointed time for the opening and shall assume the risk of late delivery or non-delivery regardless of the manner he/she employs for the transmission thereof.

6. No responsibility shall attach to the Road Commission or their representatives for premature opening or non-receipt of any bid which is not properly addressed, delivered, or identified. A confirmation of receipt of emailed bids received will be sent.

7. It is understood the Board is a governmental unit, and as such, is exempt from the payment of all state and federal taxes, except as allowed by the regulatory agencies to be included in the cost of materials and services.

8. The respondent, by submission of a bid, declares the bid is made without collusion with any other person or entity, and agrees to furnish all items and services in strict adherence with all applicable federal, date and local laws, regulations, codes and ordinances.

9. The Board reserves the right to reject any and all bids, to waive any irregularities therein, and to accept any bid which, in the opinion of the Board, may be most advantageous and to the best interest of the Kent County Road Commission. In case of error, in the extension of prices in the bid or other arithmetical error, the unit prices will govern.

https://www.bidnetdirect.com/mitn/kentcountyroads

Specifications for Bid #25-EQU-16: Fasteners

Specifications for Bid #25-EQU-16: Fasteners

It is the intent of the Kent County Road Commission to purchase their 2025 requirements of fasteners, as needed, from a selected source or sources with a one-year renewal option (2026).

General Specifications A. Quantities:

1. Quantities will be ordered on the "as needed" basis.

2. Approximately $22,000 had been expended in 2024. This expenditure is for information only and does not represent a minimum or maximum to be spent in 2024.

B. Price:

1. F.O.B. Kent County Road Commission designated garage locations and shall not vary by destination.

2. Firm price for 2025 requirements must be bid or bid will be rejected.

3. Cash Discounts will be considered in the determination of the low bidder provided discounts are based on periods of 30 days or more after acceptance of goods, or billing on bidder's invoice, whichever is later. The Road Commission reserves the right to net out the cash discount when evaluating the bid. If no cash discount is indicated in the space provided in the Bid Document, the terms will be considered as net 30 days.

C. Delivery:

1. Central Complex 1900 4 Mile Road NW Walker, MI 49544

North Complex 11777 White Creek Ave. NE Cedar Springs, MI 49319

South Complex 4949 Tim Dougherty Dr. SE Grand Rapids, MI 49512

Southwest Complex 131 84th Street SW Byron Center, MI 49315

2. Five working days upon receiving a verbal/fax order

3. All orders to be delivered complete - no partials.

D. Award:

1. To be determined not by price, but by the quality of fasteners and the contractor’s service.

2. The right is reserved by the Road Commission to award to more than one supplier in the best interest of the Road Commission or to one supplier with lowest overall costs.

E. Invoices:

1. All invoices must identify material purchased as specified on the bid form.

F. Renewal Options:

1. The Road Commission reserves the right to renew the contract for one additional one-year term (2026), each upon mutual agreement of both parties. Pricing, terms and conditions of the first year on contract will remain the same for the one-year renewal period.

G. Insurance Requirements:

1. To the fullest extent permitted by law, the Contractor shall indemnify and hold harmless the Kent County Road Commission and its agents and employees from and against all claims, damages, losses and expenses including, but not limited to, attorneys’ fees arising out of or resulting from the performance of this Contract including claims, damages, losses and expenses attributable to bodily injury, sickness, disease or death, or to injury to or destruction of tangible property, but only to the extent caused by the fault, negligent acts, or omissions of the Contractor, a Subcontractor, anyone directly or indirectly employed by them or anyone for whose acts they may be liable, regardless of whether or not such claim, damage loss or expense is caused in part by the parties indemnified hereunder.

This obligation does not include an obligation to indemnify the parties, indemnified hereunder for their sole negligence and shall not be construed to negate or modify other rights or obligations of indemnity that otherwise exist as to the parties or persons described herein, arising out of and during the progress and to the completion of work all in accordance with Public Act 468 of 2012 and the 2020 Michigan Department of Transportation’s “Standard Specifications for Construction”, Division 1, paragraph 1.07.10 with the following minimum requirements:

Workman's Compensation Statutory Coverage

Bodily Injury and Property Damage Other Than Automobile:

Each Occurrence $1,000,000 Aggregate $2,000,000 Bodily Injury Liability and Property Damage Liability Automobile:

Bodily Injury Liability $500,000 Each Person, Each Occurrence $1,000,000 Property Damage Liability $1,000,000 Each Occurrence

Combined Single Limit for Bodily Injury and Property Damage Liability Each Occurrence $2,000,000

Insurance Certificate declaring Kent County Road Commission as additional insured, not certificate holder, must be issued and shall become part of the contract.

2. Contractor shall maintain current up-to-date insurance coverage during the term of the contract and failure to do so shall result in termination of said contract.

3. Certificate must be submitted within fifteen days upon notification of award of Contract and prior to Contract signing.

H. Submission of bid will be construed as a conclusive presumption that the Contractor is thoroughly familiar with the bid requirements and specifications and that he/she understands and agrees to abide by each and all of the stipulations and requirements contained therein.

I. “The KCRC, in accordance with Title VI of the Civil Rights Act of 1964, 78 Stat. 252, 42 USC

2000d to 2000d-4 and Title 49, Code of Federal Regulations, Department of Federally-assisted programs of the Department of Transportation issued pursuant to such Act, hereby notifies all bidders that it will affirmatively insure that in any contract entered into pursuant to this advertisement, minority business enterprises will be afforded full opportunity to submit bids in response to this invitation and will not be discriminated against on the grounds of gender, disability, race, color, or national origin in consideration for an award.”

During the performance of this contract, the contractor, for itself, its assignees and successors in interest (hereinafter referred to as the “contractor”) agrees as follows:

1. Compliance with Regulations: The contractor shall comply with the Regulations relative to non-discrimination in Federally-assisted programs of the Department of Transportation, Title 49, code of Federal Regulations, Part 21 as they may be amended from time to time, (hereinafter referred to as the Regulations), which are herein incorporated by reference and made a part of this contract.

2. Non-discrimination: The contractor, with regard to the work performed by it during the contract, shall not discriminate on the grounds of race, color, or national origin in the selection and retention of subcontractors, including procurements of materials and leases of equipment. The contractor shall not participate either directly or indirectly in the discrimination prohibited by section 21.5 of the Regulation, including employment practices when the contractor covers a program set forth in Appendix B of the Regulations.

3. Solicitations for Subcontracts, Including Procurements of Materials and

Equipment: In all solicitations either by competitive bidding or negotiation made by the contactor for work to be performed under a subcontract, including procurements of materials or leases of equipment, each potential subcontractor or supplier shall be notified by the contractor of the contractor’s obligations under this contract and the Regulations relative to non-discrimination on the grounds of race, color, or national origin.

4. Information and Reports: The contractor shall provide all information and reports required by the Regulations, or directives issued pursuant thereto, and shall permit access to its books, records, accounts, other sources of information, and its facilities as may be determined by the Kent County Road Commission to be pertinent to ascertain compliance with such Regulations or directives. Where any information required of a contractor is in the exclusive possession of another who fails or refuses to furnish this information, the contractor shall so certify to the State highway department, or the Federal Highway Administration as appropriate, and shall set forth what efforts it has made to obtain the information.

5. Sanctions for Non-compliance: In the event of the contractor’s non-compliance with the non-discrimination provisions of this contract, the Kent County Road Commission shall impose such contract sanctions as it or the Federal Highway Administration may determine to be appropriate, including, but not limited to:

(a) Withholding of payments to the contractor under the contract until the contractor complies, and/or

(b) Cancellation, termination or suspension of the contract, in whole or in part.

6. Incorporation of Provisions: The contractor shall include the provisions of paragraphs (1) through (6) in every subcontract, including procurement of materials and leases of equipment, unless exempt by the Regulations, or directives issued pursuant thereto. The contractor shall take such action with respect to any subcontract or procurement as the Kent County Road Commission may direct as a means of enforcing such provisions including sanctions for non-compliance: Provided, however, that, in the event a contractor becomes involved in, or is threatened with, litigation with a subcontractor or supplier as a result of such direction, the contractor may request the Kent County Road Commission to enter into such litigation to protect the interests of the County, and, in addition, the contractor may request the State highway department to enter into such litigation to protect the interests of the State and/or the United States to enter into such litigation to protect the interests of the United States.

Technical Specifications

A. Fasteners:

a. Types & sizes - refer to bid form

b. Must meet specifications or contract will be canceled.

c. The Road Commission reserves the right to add new items as needed through the life of the contract upon mutual agreement of both parties. Requests for additional items may be by Purchasing only. On any request for additional items, vendor price responses shall be in writing.

B. Packaging:

a. Each type and size ordered must be packaged separately and labeled.

Note: Questions concerning specifications should be directed to Steve Roose, Director of

Equipment & Facilities, at (616) 242-6955.

Bid Pricing Sheet for Bid #25-EQU-16: Fasteners

Hex Cap Screws, USS Thread

Unit Price Each Grade 8, Yellow Zinc Plated

Unit Price Each Stainless Steel Grade 18-8

1/4 x ½ 1/4 x 3/4 1/4 x 1 1/4 x 1 1/4 1/4 x 1 ½ 1/4 x 1 3/4 1/4 x 2 1/4 x 2 1/4 1/4 x 2 ½ 1/4 x 2 3/4 1/4 x 3 1/4 x 4 1/4 x 4 ½ 1/4 x 5 5/16 x ½ 5/16 x 3/4 5/16 x 1 5/16 x 1 1/4 5/16 x 1 ½ 5/16 x 1 3/4 5/16 x 2 5/16 x 2 1/4 5/16 x 2 ½ 5/16 x 2 3/4 5/16 x 3 5/16 x 3 ½ 5/16 x 4 5/16 x 4 ½ 5/16 x 4 3/4 5/16 x 5 3/8 x ½ 3/8 x 3/4 3/8 x 1 3/8 x 1 1/4 3/8 x 1 ½

Hex Cap Screws, USS Thread

Unit Price Each Grade 8, Yellow Zinc Plated

Unit Price Each Stainless Steel Grade 18-8

3/8 x 1 3/4 3/8 x 2 3/8 x 2 1/4 3/8 x 2 ½ 3/8 x 2 3/4 3/8 x 3 3/8 x 3 1/4 3/8 x 3 ½ 3/8 x 4 3/8 x 4 ½ 3/8 x 5 3/8 x 5 ½ 3/8 x 6 7/16 x ½ 7/16 x 3/4 7/16 x 1 7/16 x 1 1/4 7/16 x 1 ½ 7/16 x 1 3/4 7/16 x 2 7/16 x 2 1/4 7/16 x 2 ½ 7/16 x 2 3/4 7/16 x 3 7/16 x 3 ½ 7/16 x 4 7/16 x 4 ½ 7/16 x 5 7/16 x 5 ½ 7/16 x 6 7/16 x 6 ½ ½ x 1 ½ x 1 1/4 ½ x 1 ½ ½ x 1 3/4

Bid Pricing Sheet for

Hex Cap Screws, USS Thread

Unit Price Each Grade 8, Yellow Zinc Plated

Unit Price Each Stainless Steel Grade 18-8

½ x 2 ½ x 2 1/4 ½ x 2 ½ ½ x 2 3/4 ½ x 3 ½ x 3 ¼ ½ x 3 ½ ½ x 4 ½ x 4 ½ ½ x 5 ½ x 5 ½ ½ x 6 ½ x 6 ½ ½ X 7 ½ x 8 ½ ½ x 10 ½ x 10 ½ 5/8 x 1 5/8 x 1 1/4 5/8 x 1 ½ 5/8 x 1 3/4 5/8 x 2 5/8 x 2 1/4 5/8 x 2 ½ 5/8 x 2 3/4 5/8 x 3 5/8 x 3 1/4 5/8 x 3 ½ 5/8 x 4 5/8 x 4 ½ 5/8 x 5 5/8 x 5 ½ 5/8 x 6 5/8 x 6 ½ 5/8 x 7 5/8 x 7 ½ 5/8 x 8

Hex Cap Screws, USS Thread

Unit Price Each Grade 8, Yellow Zinc Plated

Unit Price Each Stainless Steel Grade 18-8

5/8 x 8 ½ 5/8 x 9 5/8 x 10 5/8 x 11 5/8 x 12 3/4 x 1 3/4 x 1 1/4 3/4 x 1 ½ 3/4 x 1 3/4 3/4 x 2 3/4 x 2 1/4 3/4 x 2 ½ 3/4 x 2 3/4 3/4 x 3 3/4 x 3 ½ 3/4 x 4 3/4 x 4 ½ 3/4 x 5 3/4 x 5 ½ 3/4 x 6 3/4 x 6 ½ 3/4 x 7 3/4 x 7 ½ 3/4 x 8 3/4 x 8 ½ 3/4 x 9 7/8 x 1 ½ 7/8 x 1 3/4 7/8 x 2 7/8 x 2 1/4 7/8 x 2 ½ 7/8 x 2 3/4 7/8 x 3 7/8 x 3 ½ 7/8 x 4 7/8 x 4 ½ 7/8 x 5

Hex Cap Screws, USS Thread

Unit Price Each Grade 8, Yellow Zinc Plated

Unit Price Each Stainless Steel Grade 18-8

7/8 x 5 ½ 7/8 x 6 7/8 x 6 1/4 7/8 x 6 ½ 7/8 x 7 7/8 x 7 ½ 7/8 x 8 1 x 1 ½ 1 x 2 1 x 2 1/4 1 x 2 ½ 1 x 3 1 x 3 1/4 1 x 3 ½ 1 x 4 1 x 4 ½ 1 x 5 1 x 6 1 x 7 1 x 8 Finished Hex Nuts, USS Thread

Unit Price Each Grade 8, Yellow Zinc Plated

Unit Price Each Stainless Steel Grade 18-8

1/4 5/16 3/8 1/2 7/16 5/8 3/4 7/8

Oversize Body Washers (Fender Washers), with the following I.D.

Unit Price Each Grade 8, Yellow Zinc Plated

Unit Price Each Stainless Steel Grade 18-8

¼ x 1-1/2 od 5/16 x 1-1/2

3/8 x 1-1/2 od ½ x 2 od USS Flat Washers Unit Price Each

Grade 8, Yellow Zinc Plated

Unit Price Each Stainless Steel Grade 18-8

1/4 5/16 3/8 7/16 ½ 9/16 5/8 3/4 7/8 1 1/8 1 1/4 1 3/8 1 ½ 1 5/8 1 3/4 2 1/4 SAE Flat Washers Unit Price Each

Grade 8, Yellow Zinc Plated

Unit Price Each Stainless Steel Grade 18-8

1/4 5/16 3/8 7/16 ½ 5/8 3/4 7/8 1 1/8 Lock Washers Unit Price Each

Grade 8, Yellow Zinc Plated

Unit Price Each Stainless Steel Grade 18-8

1/4 5/16 3/8

7/16 ½ 5/8 3/4 7/8 1 1/8 1 1/4 Plow Bolts, Grade 8, Plain or Yellow Zinc Plated

Unit Price Each

5/8 x 2 ½ 5/8 x 2 3/4 5/8 X 3 5/8 x 3 ½

5/8 x 4

Plow Bolt Hex Nuts, ASTM A194- 2H, 1-1/16” Across Flats

Unit Price Each

5/8-11 Plow Bolt Lock Washer Plain Finish High Alloy

Unit Price Each

5/8” Nylon Insert Lock Nuts, NC

Unit Price Each Grade 8, Yellow Zinc Plated

Unit Price Each Stainless Steel Grade 18-8

1/4-20 5/16-18 3/8-16 7/16-14 ½-13 5/8-11 3/4-10 7/8-9 1-8

Nylon Insert Lock Nuts, NF

Unit Price Each Yellow Zinc Plated

Unit Price Each Stainless Steel Grade 18-8

1/4-28 5/16-24 3/8-24 7/16-20 ½-20 7/8-14 1-14 Top Lock Nuts, Grade C, NC

Unit Price Each Grade 8, Yellow Zinc Plated

Unit Price Each Stainless Steel Grade 18-8

1/4-20 5/16-18 3/8-16 7/16-14 ½-13 5/8-11 3/4-10 7/8-9 1-8 Top Lock Nuts, Grade C, NF

Unit Price Each Yellow Zinc Plated

Unit Price Each Stainless Steel Grade 18-8

1/4-28 5/16-24 3/8-24 Top Lock Nuts, Grade C, NF

Unit Price Each Yellow Zinc Plated

Unit Price Each Stainless Steel Grade 18-8

7/16-20 ½-20 5/8-18 3/4-16 7/8-14 1-14

Firm Price Period

Delivery per Specifications (5 working days)

Cash Discounts will be allowed for prompt payment as follows: % cash discount if paid within 30 days or more from delivery and acceptance of goods or completion of service. (See Item Cash Discounts under General Specifications)

Company Name

Company Address

Telephone Number Fax#

Email

Authorized Signature and Title written typed/printed

Date

Federal Employer ID#

Blank Page