Interceptor Utility Specifications.docx
DOCX document 14 KB Posted
- Attached to
- Vehicle Equipment
- Solicitation number
- 65DPS-S990
- Issued by
- Nevada
About this file
The document provided is a set of specifications for the 2020 Ford Police Interceptor Utility, including details on the required push bar, wing wrap, and pit bar components. The specification is related to a state and local contract opportunity in Nevada, specifically for the jurisdictions of Washoe County and Reno City. The specification outlines the technical requirements for the push bar, including 4-gauge steel uprights, rubber strips, lighting options, and mounting brackets. It also details the specifications for the wing wrap and pit bar components. The document states that the equipment has been rigorously tested and approved by the Georgia State Patrol.
The contract opportunity is for vehicle equipment, and the jurisdictions involved are Washoe County and Reno City in the state of Nevada. The document does not provide information on quantities, response dates, award dates, or contract term.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 0000 Standard Terms and Conditions for Commodities.pdf | ||
| Quote Instructions.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Specifications for 2020 Ford Police Interceptor Utility Part # 36-2125, 36-2125PB, 36-2125W Vendor MUST provide the following:
Push Bar
· Heavy duty 4 gauge Steel Uprights
· 2-3/4” wide rubber strips
· 1-1/2” lower tube for extra protection and added strength
· Top channel options for 2 or 4 lights from Code 3, Whelen, Sound-Off or Federal Signal
· Strong 4 gauge steel mounting brackets
· Mounting bracket design minimizes bumper trimming
· Black plated stainless hardware used on all visible fasteners
· Uprights are pre-drilled for mounting pit-bars, wing wraps or additional lights
· Cross bar pre-drilled for mounting lights siren or speaker
· Push bar design specifically stylized for Ford Explorer PPV Wing Wrap
· Heavy duty 1-1/2” steel tubing
· Wing wrap design specifically stylized for Ford Explorer PPV
· Mounts directly to pre-drilled holes in push bar and pit bar
· Black plated stainless hardware used on all visible fasteners Pit Bar
· Dual heavy duty 7 gauge steel horizontal bars
· Dual 2-3/4” wide rubber strips
· Plastic end caps for a clean finished look
· Heavy duty 4 gauge steel reinforcing brackets
· Black plated stainless hardware used on all visible fasteners
· Mounts directly to the push bar plus two additional mount points per side for supreme strength
· Pit bar design specifically stylized for Ford Explorer PPV
· Rigorously tested and approved by Georgia State Patrol
File details come from the government source that posted it. Updated .