IHS1527037 OCAO AMAG INSTALLATION.pdf

DEPARTMENT OF HEALTH AND HUMAN SERVICES · INDIAN

HEALTH SERVICE

Oklahoma City Area Office — 701 Market Dr., Oklahoma City, OK 73114

COMBINED SYNOPSIS /

SOLICITATION

Commercial products and services · FAR Part 12 (Revolutionary FAR Overhaul)

Total Small Business Set-Aside

Issuing office Oklahoma City Area Office

Solicitation No. IHS1527037

Title AMAG Symmetry HSE Access Control System Replacement and Support

Issue date July 10th, 2026

NAICS / size standard 561621 — Security Systems Services (except Locksmiths) (size standard $25.0 million)

Product/Service Code 5810

Set-aside authority Total Small Business Set-Aside (FAR 19.502-2)

Place(s) of performance Oklahoma City Area Office, 701 Market Dr., Oklahoma City, OK 73114

Period / delivery Period of performance / required delivery: Twelve Month base period with 4 twelve-month options / 30 Day ARO for installation of equipment

Quotes due July 20th, 2026, at 2:00 PM CT

Submit to maryann.yocham@ihs.gov

1. INTRODUCTION

This is a combined synopsis/solicitation for commercial products and services prepared in accordance with FAR part 12, using the combined synopsis/solicitation format at FAR 12.202(b), as revised under the Revolutionary FAR Overhaul (Executive Order 14275) and the implementing HHS/IHS class deviation, and the simplified procedures for commercial products and commercial services at FAR 12.201-1. This announcement constitutes the only solicitation; quotations are requested and a separate written solicitation will not be issued. Solicitation number IHS1527037 is issued as a Request for Quotation (RFQ) for AMAG Symmetry HSE Access Control System Replacement and Support.

The associated NAICS code is 561621 — Security Systems Services (except Locksmiths) (size standard $25.0 million).

RFO note: FAR 52.212-3 and 52.212-5 are removed. Representations and certifications are obtained through the offeror’s active SAM.gov registration; required clauses are drawn from the FAR 12.205 clause tables.

2. SET-ASIDE DETERMINATION

This requirement is a Total Small Business Set-Aside under FAR 19.104-1. The offeror must qualify under the applicable FAR part 19 notice clause below.

3. DESCRIPTION OF REQUIREMENT

The Oklahoma City Area Office (OCA), Indian Health Service (IHS), requires the procurement, installation, configuration, and ongoing maintenance and support of the AMAG Symmetry Homeland Security Edition (HSE) access control system, including software, controllers, and associated hardware.

This project implements a physical access control system in accordance with HHS, IHS, IHM, FICAM, and FIPS 201 guidance and PACS (Physical Access Control System) regulations. It will address malfunctioning access controls and ensure a fully functional and complete physical access control system within the OCAO. New PIV readers of the appropriate type will be installed where required. All new devices, hardware, and software shall be compatible with FICAM requirements to support potential future compliance efforts.

4. DELIVERY, PLACE(S) OF PERFORMANCE, AND PERIOD

Place of performance / delivery: Oklahoma City Area Office, 701 Market Dr., Oklahoma City, OK 73114.

Period of performance / required delivery: Period of performance / required delivery: Twelve Month base period with 4 twelve month options / 30 Day ARO for installation of equipment.

F.O.B. point: Destination.

Inspection and acceptance: as provided in the clause at FAR 52.212-4, Contract Terms and Conditions—Commercial Products and Commercial Services.

5. EVALUATION METHODS

The Government will evaluate quotations and make award using the method below. This language constitutes the tailored fill-in for FAR 52.212-2, Evaluation—Commercial Products and Commercial Services (RFO 12.205(a)(2)) and includes all evaluation factors and criteria for award.

Evaluation. The Government will award a purchase order to the responsible quoter whose conforming quotation is most advantageous to the Government, based on a comparative evaluation of quotations against the following factor(s): a detailed approach of installation and configuration of the required software and equipment, details of coverages under a full-service maintenance and support agreement and a limited maintenance and support agreement, proof of AMAG certification, relevant past performance, and price. The Government will compare quotations directly against one another under each factor to determine which provides the greatest benefit to the Government; quotations will not be assigned numerical scores or adjectival ratings, and no competitive range will be established.

The non-price factors, when combined, are more important than price. The Government may make award without communications, or may communicate with one or more quoters and request revised quotations. Award will represent the best value to the Government, price and other factors considered. (RFO 12.203(c)(2))

Past Performance. The Government will evaluate the quoter's recent and relevant past performance as an indicator of its ability to perform this requirement. “Recent” means performed within 3 years of the date of this RFQ; “relevant” means similar in size, scope, and complexity. The Government may consider information from any source, including CPARS, references, and the quoter's experience as a subcontractor. A quoter without a record of relevant past performance will not be evaluated favorably or unfavorably on this factor.

Price. The Government will determine price to be fair and reasonable, based whenever possible on adequate price competition. Price will be evaluated inclusive of transportation charges to destination and by adding the prices for all CLINs / option periods to the base requirement.

Prompt payment discounts will not be considered in the price evaluation.

Quotation is not an offer. A quotation is not an offer and cannot be accepted by the Government to form a binding contract. Any resulting purchase order is the Government's offer to the quoter; a binding contract is formed only when the quoter accepts the purchase order, either by written acceptance or by commencing performance. (RFO 12.201-1(b))

Late quotations. The Government will consider all quotations received by the date and time specified above and may, consistent with good business judgment, consider a quotation received after the due date and time. (RFO 12.203(c)(1))

Brief explanation to unsuccessful quoters. Upon request received within 3 days after a quoter receives notification of award, the Government will provide that unsuccessful quoter a brief explanation of the basis for the award decision. (RFO 13.301 / 12.301(b))

6. INSTRUCTIONS TO OFFERORS

Quotations are due no later than July 20th, 2026, at 2:00 PM CT. Email is the only acceptable method of submission. Submit quotations by email to maryann.yocham@ihs.gov. Quotations submitted by any other method will not be considered.

Each quotation shall include, at a minimum, the following:

• Vendor name

• Unique Entity Identifier (UEI)

• Prompt payment terms

• Delivery time

• GSA contract number (if applicable)

• Date the quote expires

• Warranty

• Pricing for all line items, and documentation addressing the evaluation factors stated in Section 5

Representations and certifications are made through the offeror’s active SAM.gov registration (FAR 52.212-1; 52.204-7). Failure to provide sufficient technical detail may result in rejection of your quote.

Point of contact: Mary Ann Yocham, 405-951-6043.

7. PROVISIONS AND CLAUSES

Provisions and clauses are grouped below — FAR and HHSAR, provisions and clauses separately, in numerical order. Provisions apply to this solicitation only; at award the contract incorporates the clause lists (not the provisions). Items marked “By reference” are incorporated under FAR 52.252-1 (provisions) and 52.252-2 (clauses), with the same force and effect as if printed in full (full text at https://www.acquisition.gov). Items marked “Full text” are printed below; highlighted fill-ins must be completed. Clauses marked “(DEVIATION)” carry the date of the FAR class deviation adopted by your IHS Area.

7.1 FAR Provisions (solicitation only)

Number Title Incorporation

FAR 52.204-7 System for Award Management—Registration (DEVIATION) By reference

FAR 52.212-1 Instructions to Offerors—Commercial Products and Commercial Services (DEVIATION)

By reference (addenda)

FAR 52.212-2 Evaluation—Commercial Products and Commercial Services

(DEVIATION)

Full text — Section 5

FAR 52.222-

Certification Regarding Knowledge of Child Labor for Listed End Products (FEB 2021)

By reference

FAR 52.223-4 Recovered Material Certification (MAY 2008) By reference

7.2 FAR Clauses (incorporated into any resulting contract)

Number Title Incorporation

FAR 52.203-17 Contractor Employee Whistleblower Rights (NOV 2023) By reference

FAR 52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017)

By reference

FAR 52.204-9 Personal Identity Verification of Contractor Personnel (JAN 2011) By reference

FAR 52.204-13 System for Award Management—Maintenance (DEVIATION) By reference

FAR 52.209-6 Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment (DEVIATION)

By reference

FAR 52.209-10 Prohibition on Contracting with Inverted Domestic Corporations

(DEVIATION)

By reference

FAR 52.212-4 Terms and Conditions—Commercial Products and Commercial Services

(DEVIATION)

By reference

FAR 52.219-6 Notice of Total Small Business Set-Aside (DEVIATION) By reference

FAR 52.219-28 Postaward Small Business Program Rerepresentation (DEVIATION) By reference

FAR 52.222-3 Convict Labor (DEVIATION) By reference

FAR 52.222-19 Child Labor—Cooperation with Authorities and Remedies (DEVIATION) By reference

FAR 52.222-20 Contracts for Materials, Supplies, Articles, and Equipment (DEVIATION) By reference

FAR 52.222-36 Equal Opportunity for Workers with Disabilities (DEVIATION) By reference

FAR 52.222-41 Service Contract Labor Standards (DEVIATION) By reference

FAR 52.222-42 Statement of Equivalent Rates for Federal Hires (MAY 2014) Full text

FAR 52.222-43 Fair Labor Standards Act and Service Contract Labor Standards—Price Adjustment (Multiple Year and Option Contracts) (DEVIATION)

By reference

FAR 52.222-50 Combating Trafficking in Persons (DEVIATION) By reference

FAR 52.222-54 Employment Eligibility Verification (DEVIATION) By reference

FAR 52.222-62 Paid Sick Leave Under Executive Order 13706 (DEVIATION) By reference

FAR 52.222-90 Addressing DEI Discrimination by Federal Contractors (DEVIATION) By reference

FAR 52.223-5 Pollution Prevention and Right-to-Know Information (MAY 2024) By reference

FAR 52.223-23 Sustainable Products and Services (DEVIATION) By reference

FAR 52.224-3 Privacy Training (JAN 2017) By reference

FAR 52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving (MAY 2024)

By reference

FAR 52.232-33 Payment by Electronic Funds Transfer—System for Award Management

(OCT 2018)

By reference

FAR 52.232-40 Providing Accelerated Payments to Small Business Subcontractors (MAR 2023)

By reference

FAR 52.233-3 Protest After Award (DEVIATION) By reference

FAR 52.233-4 Applicable Law for Breach of Contract Claim (DEVIATION) By reference

FAR 52.237-1 Site Visit (APR 1984) By reference

FAR 52.237-2 Protection of Government Buildings, Equipment, and Vegetation (APR 1984) By reference

FAR 52.240-91 Security Prohibitions and Exclusions (DEVIATION) By reference

FAR 52.244-6 Subcontracts for Commercial Products and Commercial Services

(DEVIATION)

By reference

7.4 HHSAR Clauses (incorporated into any resulting contract)

Number Title Incorporation

HHSAR 352.224-

Privacy Act (DEC 2015) By reference

HHSAR 352.239-

Electronic and Information Technology Accessibility (Section 508) (DEC 2015)

By reference

Full-text provisions and clauses (fill-ins highlighted)

FAR 52.217-8 — Option to Extend Services (NOV 1999)

The Government may require continued performance of any services within the limits and at the rates specified in the contract. These rates may be adjusted only as a result of revisions to prevailing labor rates provided by the Secretary of Labor. The option provision may be exercised more than once, but the total extension of performance hereunder shall not exceed 6 months.

The Contracting Officer may exercise the option by written notice to the Contractor within 30 days of the contracts expiration..

(End of provision/clause)

FAR 52.217-9 — Option to Extend the Term of the Contract (MAR 2000)

(a) The Government may extend the term of this contract by written notice to the Contractor within 30 days; provided that the Government gives the Contractor a preliminary written notice of its intent to extend at least 30 days days before the contract expires. The preliminary notice does not commit the Government to an extension.

(b) If the Government exercises this option, the extended contract shall be considered to include this option clause.

(c) The total duration of this contract, including the exercise of any options under this clause, shall not exceed 5 years and 6 months.

(End of provision/clause)

FAR 52.222-42 — Statement of Equivalent Rates for Federal Hires (MAY 2014)

In compliance with the Service Contract Labor Standards statute and the regulations of the Secretary of Labor (29 CFR part 4), this clause identifies the classes of service employees expected to be employed under the contract and states the wages and fringe benefits payable to each if they were employed by the contracting agency subject to 5 U.S.C. 5341 or 5332. This statement is for information only: it is not a wage determination.

Employee class — Electronics Technician. Monetary wage—fringe benefits — $24.18.

(End of provision/clause)

8. ATTACHMENTS

• Attachment 1 — Statement of Work / Specification

• Attachment 2 — Price Schedule / Quotation form (provides the line-item number(s), items, quantities, and units of measure, including options)

• Attachment 3 — Wage Determination(s)

Statement of Work (SOW) AMAG Symmetry HSE Access Control System Replacement and Support

05/19/2026

1. PURPOSE

The Oklahoma City Area Office (OCA), Indian Health Service (IHS), requires the procurement, installation, configuration, and ongoing maintenance and support of the AMAG Symmetry Homeland Security Edition (HSE) access control system, including software, controllers, and associated hardware.

This project implements a physical access control system in accordance with HHS, IHS, IHM, FICAM, and FIPS 201 guidance and PACS (Physical Access Control System) regulations. It will address malfunctioning access controls and ensure a fully functional and complete physical access control system within the OCAO.

New PIV readers of the appropriate type will be installed where required. All new devices, hardware, and software shall be compatible with FICAM requirements to support potential future compliance efforts.

2. SCOPE OF WORK

2.1 Hardware Replacement

The contractor shall remove all existing M2150 DBC and BC series control boards and replace them with M4000 HSE (Homeland Security Edition) controllers, including all required enclosure boxes; and replace all related power supplies and card readers.

2.2 Software Installation

The contractor shall install and configure AMAG Symmetry Pro HSE Version 9.8 software (or latest available version at time of installation) with two (2) client licenses on a Government-furnished virtual server.

Installation may occur during normal business hours prior to controller installation.

2.3 PIV Integration

The contractor shall provide and configure two (2) PIV card registration units (one spare) and related software capable of registering new PIV cards that are FIPS 140-2 latest version compliant and integrating with the AMAG Symmetry system to populate user data.

2.4 Pricing Structure

The contractor shall provide two pricing models. The Government will choose one of the two provided options:

1. Full-service maintenance including labor, parts, on-site support, remote support, and AMAG software support agreement.

2. Limited maintenance including AMAG software support, remote support, and controller reprogramming only.

2.5 Maintenance and Support

The contractor shall provide maintenance and support services for all AMAG Symmetry HSE and pivClass Registration software and hardware, including:

• Preventive maintenance

• Troubleshooting and repair

• Firmware and software updates

3. PERIOD OF PERFORMANCE

Installation shall be completed within thirty (30) calendar days of contract award. Maintenance and support services shall begin immediately after installation and consist of a twelve (12) month base period with four

(4) twelve (12) month option periods.

4. LEVEL OF EFFORT

4.1. Software

Install and configure AMAG Symmetry Pro HSE Version 9.8 software/Licensing (or latest available version at time of installation) with two (2) client licenses to a virtual server at Oklahoma City Area Office.

4.2. PIV Workstations

Provide and install two (2) PIV card registration systems, including software, on Government-furnished workstations.

4.3. Equipment Removal

Remove and dispose of all M2150 boards, card readers, control panels and power supplies.

4.4. Controller Installation

Install and connect eight (8) M4000 HSE controllers in the communications room and configure them within the Symmetry system. The system shall be configured to control access to twenty-nine (29) doors and/or gates.

Work shall be coordinated to minimize system downtime.

4.5. Emergency Egress

Contractor shall ensure emergency egress is provided at all controlled doors per NFPA 101 Life Safety Code including any modifications to the fire alarm system as needed.

4.6. Card Readers

Install twenty-eight (28) HID Signo PIV readers matching or equivalent to existing.

4.7. Related Components

Replace any damaged or inoperable door strikes, motion sensors, door sensors, and related PACS system components.

4.8. Cabling

Replace any damaged, unusable or incompatible cabling as needed with plenum-rated, matching color and type. Any cabling installed shall be placed in J-hooks, neat, clean, and code compliant manner. Keep all cabling off sprinkler piping and supports. All walls, ceilings and floor penetrations need to be sealed with fire-rated sealant as applicable.

4.9. Spare Equipment

Provide the following spare equipment:

• One (1) M4000-DBB board or equivalent

• One (1) M4000-DEC4 board or equivalent

• Two preprogramed readers without keypad

• One preprogramed reader with keypad

4.10. Service Response

Provide service response during normal business hours (8:00 AM – 5:00 PM). Contractor shall respond to service requests within two (2) business days.

4.11. Full-Service Maintenance

Provide all labor and parts necessary to maintain system functionality.

4.12. Parts Replacement

Provide replacement parts within five (5) business days. If this timeline cannot be met, the contractor shall implement a temporary solution to maintain system operability and security (based on if this is the pricing model chosen).

4.13. System Labeling & Documentation

Provide clear labels for all controllers, wiring, panels, and card readers. Submit a complete system layout diagram showing controller locations, panel connections, and reader/door assignments.

4.14. Travel

All travel costs shall be included in contractor pricing.

4.15. Warranties

Contractor shall provide a one year warranty for all parts, equipment (unless manufacturer warranty is longer), and labor.

4.16. Certifications

Contractor shall provide proof of AMAG Symmetry Installation & Service capability certification upon award.

Contractor shall provide FIPS 201-2 (or most current) certification for the installed system once installation is completed.

4.17. Training

Provide training for designated Government personnel on system operation, PIV enrollment, and basic troubleshooting.

5. SPECIAL REQUIREMENTS

5.1. Section 508 And Accessibility

• This product must conform to the Revised Section 508 (https://www.access-board.gov/guidelines-and-standards/communications-and-it/about-the-ict-refresh/final-rule/text-of-the-standards-and-guidelines) and WCAG 2.0 Level AA standards as outlined below.

• Solicitations for supplies and services shall require the submission of a Section 508 Product Assessment Template. The template can be found at https://www.itic.org/policy/accessibility/vpat.

All Information and Communication Technology (ICT) deliverables under this contract (e.g., websites, applications, electronic documents, and multimedia) must comply with the Revised Section 508 Standards (36 CFR Part 1194) and the Web Content Accessibility Guidelines (WCAG) 2.1 Level AA standards. The Contractor shall ensure accessibility of all ICT deliverables and provide conformance documentation in the form of a Voluntary Product Accessibility Template (VPAT®) / Accessibility Conformance Report (ACR), or by completing the HHS Section 508 Accessibility Checklists. The current VPAT 2.5 template includes fields for reporting conformance to WCAG 2.1 and shall be used to document accessibility. The Contractor shall remediate any identified accessibility issues at no additional cost. The Contracting Officer will include the applicable Health and Human Services Acquisition Regulation (HHSAR) clauses 352.239-73 and 352.239-74 in the solicitation and resulting contract.

5.2. In accordance with HHSAR 304.1301 HHS follows National Institute of Standards and Technology (NIST) Federal Information Processing Standards (FIPS) Publication (PUB) Number 201-2, Personal Identity Verification (PIV) of Federal Employees and Contractors, and OMB implementation guidance for personal identity verification, for all affected contractor and subcontractor personnel when contract performance requires contractors to have routine physical access to a federally-controlled facility and/or routine physical and logical access to a federally-controlled information system.

5.3. The USPHS Oklahoma City Area Office is a tobacco/smoke free environment (buildings and grounds). No tobacco/smoking use will be tolerated during service.

5.4. Security Requirements: Contractor personnel will be required to contact the government designated point of contact upon arrival when reporting for service calls or delivery supplies. The contractor shall be responsible for the security of all organizational information. Current rules and regulations applicable to the premises, where the work shall be performed shall apply to the contractor and its employees while working on the premises. These regulations include but are not limited to, escort by Oklahoma City Area Office official, presenting valid identification, smoking restriction and any safety procedures.

https://www.itic.org/policy/accessibility/vpat

5.5. The contractor shall not disclose or cause to disseminate any information concerning operations of Oklahoma City Area Office. Such action(s) could result in violation of the contract and possible legal actions.

5.6. All inquiries, comments, or complaints arising from any matter observed, experienced or learned of as a result of or in connection with the performance of the contract, the resolution of which may require the dissemination of official information, shall be directed to the government’s designated representative.

6. DELIVERABLES AND REPORTING REQUIREMENTS

6.1. Delivery: The contractor will coordinate the delivery, installation and training date with the designated government employee. The government will provide the contractor with building access for this sole purpose. The designated government employee will work with the pertinent government agency(ies) to secure the needed access. No deliveries can be made after 4:15pm. Driver needs a valid ID.

6.2. Contractor Point of Contact: The contractor shall furnish one designated point of contact (POC) to the government’s designated representative for coordination of supplies, delivery, and/or maintenance. The POC will be empowered to make daily decisions to ensure that the contract implementation and day-to-day maintenance meets the terms and conditions of this contract.

6.3. Contractor’s Phone Numbers: The contractor shall provide a toll-free telephone number for service calls, which must be answered during at least eight working hours, between 8:00 am and 4:30 pm, Monday through Friday.

6.4. Personnel Qualifications:

Contractor shall be an AMAG Symmetry dealer and experienced with AMAG symmetry maintenance and support.

7. GOVERNMENT FURNISHED PROPERTY, FACILITIES AND SERVICES

The Government shall supply virtual server to install the Pro HSE (Homeland Security Edition) of AMAG symmetry software be installed on.

8. CONTRACTOR FURNISHED PROPERTY, FACILITIES AND SERVICES

Required personnel, materials, supplies and equipment: The contractor shall furnish all personnel, materials, supplies and equipment required to perform work under the contract.

9. CHANGES TO THE STATEMENT OF WORK (SOW)

Any changes to this SOW shall be authorized and approved only through written correspondence from the Contracting Officer. Costs incurred by the contractor through the actions of parties other than the Contracting Officer shall be borne by the contractor.

10. DELIVERABLES/PERFORMANCE MATRIX

10.1 Install

1. Contractor furnished and correctly installed all specified hardware, software, cabling, and related components. YES NO

2. PACS system installed is 100% operational with no malfuctions & FIPS 201-2 compliant.

YES NO

3. Contractor provided all programming, testing, commissioning reports. YES NO

4. Contractor installed PACS system within the specified timeline. YES NO

5. Contractor provided as-built prints, spare items, product info, warranties, O&Ms, etc. YES NO

6. Contractor provided training to designated staff. YES NO

7. Contractor returns work areas and building features back to normal condition upon completion of work.

YES NO

8. Contractor removes trash, debris, and removed items from all areas at end of each day and at end of project. Areas are left in a clean, orderly, and undamaged condition. YES NO

10.2 Service:

1. Contractor responds to service calls and repairs in a timely manner specified in SOW. YES NO

2. Contractor repairs system back to 100% fully operational when work is completed. YES NO

BASE YEAR – August 01, 2026 – July 31, 2027

CLIN ITEM UOM QTY. TOTAL

1 Installation, Labor, and Materials for AMAG

Software System

2 Option 1 Full Maintenance and Support Services (only one option will be chosen) MO 12

Option 2 Limited Maintenance and Support Services (only one option will be chosen) MO 12

OPTIONAL ORDERING PERIOD ONE – August 01, 2026 – July 31, 2027

3 Option 1 Full Maintenance and Support

Services (only one option will be chosen) MO 12

OPTIONAL ORDERING PERIOD TWO – August 01, 2026 – July 31, 2027

4 Option 1 Full Maintenance and Support

Services (only one option will be chosen) MO 12

OPTIONAL ORDERING PERIOD THREE – August 01, 2026 – July 31, 2027

5 Option 1 Full Maintenance and Support

Services (only one option will be chosen) MO 12

OPTIONAL ORDERING PERIOD FOUR – August 01, 2026 – July 31, 2027

6 Option 1 Full Maintenance and Support

Services (only one option will be chosen) MO 12

REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-5315 Daniel W. Simms Division of | Revision No.: 29 Director Wage Determinations| Date Of Last Revision: 5/13/2026

State: Oklahoma

Area: Oklahoma Counties of Canadian, Cleveland, Grady, Lincoln, Logan, McClain and Oklahoma

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 17.46 01012 - Accounting Clerk II 19.60 01013 - Accounting Clerk III 21.92 01020 - Administrative Assistant 27.32 01035 - Court Reporter 23.01 01041 - Customer Service Representative I 14.87 01042 - Customer Service Representative II 16.23 01043 - Customer Service Representative III 18.22 01051 - Data Entry Operator I 15.85 01052 - Data Entry Operator II 17.29 01060 - Dispatcher, Motor Vehicle 23.11 01070 - Document Preparation Clerk 17.19 01090 - Duplicating Machine Operator 17.19 01111 - General Clerk I 14.66 01112 - General Clerk II 16.00 01113 - General Clerk III 18.00 01120 - Housing Referral Assistant 23.33 01141 - Messenger Courier 18.07 01191 - Order Clerk I 19.44 01192 - Order Clerk II 21.21 01261 - Personnel Assistant (Employment) I 18.84 01262 - Personnel Assistant (Employment) II 21.07 01263 - Personnel Assistant (Employment) III 23.48 01270 - Production Control Clerk 26.63 01290 - Rental Clerk 15.44 01300 - Scheduler, Maintenance 18.70 01311 - Secretary I 18.70 01312 - Secretary II 20.92 01313 - Secretary III 23.33 01320 - Service Order Dispatcher 20.67 01410 - Supply Technician 27.32 01420 - Survey Worker 18.93 01460 - Switchboard Operator/Receptionist 16.65 01531 - Travel Clerk I 17.05 01532 - Travel Clerk II 18.16 01533 - Travel Clerk III 19.75 01611 - Word Processor I 15.95 01612 - Word Processor II 17.91 01613 - Word Processor III 20.03

05000 - Automotive Service Occupations 05005 - Automobile Body Repairer, Fiberglass 22.89 05010 - Automotive Electrician 22.11 05040 - Automotive Glass Installer 21.00 05070 - Automotive Worker 21.00 05110 - Mobile Equipment Servicer 18.85 05130 - Motor Equipment Metal Mechanic 23.17 05160 - Motor Equipment Metal Worker 21.00 05190 - Motor Vehicle Mechanic 23.17 05220 - Motor Vehicle Mechanic Helper 17.73 05250 - Motor Vehicle Upholstery Worker 20.01 05280 - Motor Vehicle Wrecker 21.00 05310 - Painter, Automotive 22.11 05340 - Radiator Repair Specialist 21.00 05370 - Tire Repairer 16.86 05400 - Transmission Repair Specialist 23.17

07000 - Food Preparation And Service Occupations

07010 - Baker 14.84 07041 - Cook I 14.10 07042 - Cook II 15.70 07070 - Dishwasher 12.72 07130 - Food Service Worker 14.20 07210 - Meat Cutter 17.13 07260 - Waiter/Waitress 10.09

09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 21.73 09040 - Furniture Handler 13.89 09080 - Furniture Refinisher 19.37 09090 - Furniture Refinisher Helper 15.53 09110 - Furniture Repairer, Minor 17.53 09130 - Upholsterer 19.56

11000 - General Services And Support Occupations 11030 - Cleaner, Vehicles 14.27 11060 - Elevator Operator 14.89 11090 - Gardener 20.24 11122 - Housekeeping Aide 14.89 11150 - Janitor 14.89 11210 - Laborer, Grounds Maintenance 17.02 11240 - Maid or Houseman 13.30 11260 - Pruner 16.05 11270 - Tractor Operator 19.03 11330 - Trail Maintenance Worker 17.02 11360 - Window Cleaner 15.78

12000 - Health Occupations 12010 - Ambulance Driver 19.13 12011 - Breath Alcohol Technician 25.03 12012 - Certified Occupational Therapist Assistant 31.93 12015 - Certified Physical Therapist Assistant 30.80 12020 - Dental Assistant 22.19 12025 - Dental Hygienist 46.19 12030 - EKG Technician 23.05 12035 - Electroneurodiagnostic Technologist 23.05 12040 - Emergency Medical Technician 19.13 12071 - Licensed Practical Nurse I 22.37 12072 - Licensed Practical Nurse II 25.03 12073 - Licensed Practical Nurse III 27.91 12100 - Medical Assistant 18.36 12130 - Medical Laboratory Technician 26.36 12160 - Medical Record Clerk 22.17 12190 - Medical Record Technician 24.80 12195 - Medical Transcriptionist 20.96 12210 - Nuclear Medicine Technologist 42.86 12221 - Nursing Assistant I 14.03 12222 - Nursing Assistant II 15.79 12223 - Nursing Assistant III 17.23 12224 - Nursing Assistant IV 19.34 12235 - Optical Dispenser 17.50 12236 - Optical Technician 17.58 12250 - Pharmacy Technician 18.58 12280 - Phlebotomist 19.34 12305 - Radiologic Technologist 36.71 12311 - Registered Nurse I 27.48 12312 - Registered Nurse II 31.97 12313 - Registered Nurse II, Specialist 31.97 12314 - Registered Nurse III 38.68 12315 - Registered Nurse III, Anesthetist 38.68 12316 - Registered Nurse IV 46.38 12317 - Scheduler (Drug and Alcohol Testing) 31.01 12320 - Substance Abuse Treatment Counselor 29.29

13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 22.25 13012 - Exhibits Specialist II 27.17 13013 - Exhibits Specialist III 33.22 13041 - Illustrator I 20.86 13042 - Illustrator II 25.65 13043 - Illustrator III 31.38 13047 - Librarian 28.37 13050 - Library Aide/Clerk 15.62 13054 - Library Information Technology Systems Administrator 25.61 13058 - Library Technician 17.35 13061 - Media Specialist I 18.49 13062 - Media Specialist II 20.68 13063 - Media Specialist III 23.05 13071 - Photographer I 17.38 13072 - Photographer II 19.44 13073 - Photographer III 24.08 13074 - Photographer IV 29.45 13075 - Photographer V 35.63 13090 - Technical Order Library Clerk 19.62 13110 - Video Teleconference Technician 24.03

14000 - Information Technology Occupations 14041 - Computer Operator I 24.27 14042 - Computer Operator II 27.14 14043 - Computer Operator III 30.25 14044 - Computer Operator IV 33.62 14045 - Computer Operator V 37.24 14071 - Computer Programmer I (see 1) 14072 - Computer Programmer II (see 1) 14073 - Computer Programmer III (see 1)

14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 24.27 14160 - Personal Computer Support Technician 33.62 14170 - System Support Specialist 37.24

15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 33.98 15020 - Aircrew Training Devices Instructor (Rated) 41.11 15030 - Air Crew Training Devices Instructor (Pilot) 49.27 15050 - Computer Based Training Specialist / Instructor 33.98 15060 - Educational Technologist 30.08 15070 - Flight Instructor (Pilot) 49.27 15080 - Graphic Artist 24.08 15085 - Maintenance Test Pilot, Fixed, Jet/Prop 49.27 15086 - Maintenance Test Pilot, Rotary Wing 49.27 15088 - Non-Maintenance Test/Co-Pilot 49.27 15090 - Technical Instructor 25.15 15095 - Technical Instructor/Course Developer 30.76 15110 - Test Proctor 20.31 15120 - Tutor 20.31

16000 - Laundry, Dry-Cleaning, Pressing And Related Occupations 16010 - Assembler 11.01 16030 - Counter Attendant 11.01 16040 - Dry Cleaner 14.03 16070 - Finisher, Flatwork, Machine 11.01 16090 - Presser, Hand 11.01 16110 - Presser, Machine, Drycleaning 11.01 16130 - Presser, Machine, Shirts 11.01 16160 - Presser, Machine, Wearing Apparel, Laundry 11.01 16190 - Sewing Machine Operator 15.05 16220 - Tailor 16.06 16250 - Washer, Machine 12.05

19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 29.38 19040 - Tool And Die Maker 34.79

21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 21.85 21030 - Material Coordinator 26.63 21040 - Material Expediter 26.63 21050 - Material Handling Laborer 17.43 21071 - Order Filler 16.20 21080 - Production Line Worker (Food Processing) 21.85 21110 - Shipping Packer 18.49 21130 - Shipping/Receiving Clerk 18.49 21140 - Store Worker I 18.03 21150 - Stock Clerk 21.83 21210 - Tools And Parts Attendant 21.85 21410 - Warehouse Specialist 21.85

23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 32.32 23019 - Aircraft Logs and Records Technician 26.74 23021 - Aircraft Mechanic I 30.97 23022 - Aircraft Mechanic II 32.32 23023 - Aircraft Mechanic III 33.67 23040 - Aircraft Mechanic Helper 23.70 23050 - Aircraft, Painter 29.56 23060 - Aircraft Servicer 26.74 23070 - Aircraft Survival Flight Equipment Technician 29.56 23080 - Aircraft Worker 28.06 23091 - Aircrew Life Support Equipment (ALSE) Mechanic I 28.06 23092 - Aircrew Life Support Equipment (ALSE) Mechanic II 30.97 23110 - Appliance Mechanic 19.08 23120 - Bicycle Repairer 23.09 23125 - Cable Splicer 34.84 23130 - Carpenter, Maintenance 23.44 23140 - Carpet Layer 22.84 23160 - Electrician, Maintenance 29.08 23181 - Electronics Technician Maintenance I 30.40 23182 - Electronics Technician Maintenance II 32.02 23183 - Electronics Technician Maintenance III 33.55 23260 - Fabric Worker 24.49 23290 - Fire Alarm System Mechanic 24.56 23310 - Fire Extinguisher Repairer 23.09 23311 - Fuel Distribution System Mechanic 32.74 23312 - Fuel Distribution System Operator 26.65 23370 - General Maintenance Worker 20.28 23380 - Ground Support Equipment Mechanic 30.97 23381 - Ground Support Equipment Servicer 26.74 23382 - Ground Support Equipment Worker 28.06 23391 - Gunsmith I 23.09 23392 - Gunsmith II 25.70 23393 - Gunsmith III 28.37 23410 - Heating, Ventilation And Air-Conditioning Mechanic 26.43 23411 - Heating, Ventilation And Air Contidioning

Mechanic (Research Facility) 27.58 23430 - Heavy Equipment Mechanic 28.80 23440 - Heavy Equipment Operator 22.94 23460 - Instrument Mechanic 30.27 23465 - Laboratory/Shelter Mechanic 27.07 23470 - Laborer 17.43 23510 - Locksmith 24.54 23530 - Machinery Maintenance Mechanic 29.63 23550 - Machinist, Maintenance 27.52 23580 - Maintenance Trades Helper 16.93 23591 - Metrology Technician I 30.27 23592 - Metrology Technician II 31.59 23593 - Metrology Technician III 32.91 23640 - Millwright 28.37 23710 - Office Appliance Repairer 21.86 23760 - Painter, Maintenance 23.74 23790 - Pipefitter, Maintenance 28.13 23810 - Plumber, Maintenance 26.85 23820 - Pneudraulic Systems Mechanic 28.37 23850 - Rigger 28.37 23870 - Scale Mechanic 25.70 23890 - Sheet-Metal Worker, Maintenance 30.97 23910 - Small Engine Mechanic 21.97 23931 - Telecommunications Mechanic I 27.56 23932 - Telecommunications Mechanic II 28.75 23950 - Telephone Lineman 31.64 23960 - Welder, Combination, Maintenance 22.85 23965 - Well Driller 28.13 23970 - Woodcraft Worker 28.37 23980 - Woodworker 23.09

24000 - Personal Needs Occupations 24550 - Case Manager 18.05 24570 - Child Care Attendant 12.19 24580 - Child Care Center Clerk 15.19 24610 - Chore Aide 13.05 24620 - Family Readiness And Support Services Coordinator 18.05 24630 - Homemaker 18.05

25000 - Plant And System Operations Occupations 25010 - Boiler Tender 34.34 25040 - Sewage Plant Operator 23.55 25070 - Stationary Engineer 34.34 25190 - Ventilation Equipment Tender 26.28 25210 - Water Treatment Plant Operator 23.55

27000 - Protective Service Occupations 27004 - Alarm Monitor 21.56 27007 - Baggage Inspector 17.08 27008 - Corrections Officer 23.46 27010 - Court Security Officer 27.20 27030 - Detection Dog Handler 19.43 27040 - Detention Officer 23.46 27070 - Firefighter 33.46 27101 - Guard I 17.08 27102 - Guard II 19.43 27131 - Police Officer I 33.01 27132 - Police Officer II 36.67

28000 - Recreation Occupations 28041 - Carnival Equipment Operator 12.73 28042 - Carnival Equipment Repairer 13.54 28043 - Carnival Worker 10.74 28210 - Gate Attendant/Gate Tender 18.37 28310 - Lifeguard 12.47 28350 - Park Attendant (Aide) 20.54 28510 - Recreation Aide/Health Facility Attendant 15.00 28515 - Recreation Specialist 25.46 28630 - Sports Official 16.37 28690 - Swimming Pool Operator 16.74

29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 32.70 29020 - Hatch Tender 32.70 29030 - Line Handler 32.70 29041 - Stevedore I 31.17 29042 - Stevedore II 34.44

30000 - Technical Occupations 30010 - Air Traffic Control Specialist, Center (HFO) (see 2) 46.07 30011 - Air Traffic Control Specialist, Station (HFO) (see 2) 31.77 30012 - Air Traffic Control Specialist, Terminal (HFO) (see 2) 34.99 30021 - Archeological Technician I 19.75 30022 - Archeological Technician II 22.09 30023 - Archeological Technician III 27.37 30030 - Cartographic Technician 27.37 30040 - Civil Engineering Technician 32.42 30051 - Cryogenic Technician I 30.31 30052 - Cryogenic Technician II 33.47 30061 - Drafter/CAD Operator I 19.75 30062 - Drafter/CAD Operator II 22.09 30063 - Drafter/CAD Operator III 24.62 30064 - Drafter/CAD Operator IV 30.31 30081 - Engineering Technician I 19.05

30082 - Engineering Technician II 21.83 30083 - Engineering Technician III 23.92 30084 - Engineering Technician IV 29.64 30085 - Engineering Technician V 36.26 30086 - Engineering Technician VI 43.86 30090 - Environmental Technician 27.05 30095 - Evidence Control Specialist 27.37 30210 - Laboratory Technician 25.44 30221 - Latent Fingerprint Technician I 29.86 30222 - Latent Fingerprint Technician II 32.97 30240 - Mathematical Technician 28.87 30361 - Paralegal/Legal Assistant I 21.56 30362 - Paralegal/Legal Assistant II 26.71 30363 - Paralegal/Legal Assistant III 32.67 30364 - Paralegal/Legal Assistant IV 39.53 30375 - Petroleum Supply Specialist 33.47 30390 - Photo-Optics Technician 27.37 30395 - Radiation Control Technician 33.47 30461 - Technical Writer I 27.76 30462 - Technical Writer II 33.96 30463 - Technical Writer III 41.09 30491 - Unexploded Ordnance (UXO) Technician I 29.28 30492 - Unexploded Ordnance (UXO) Technician II 35.43 30493 - Unexploded Ordnance (UXO) Technician III 42.46 30494 - Unexploded (UXO) Safety Escort 29.28 30495 - Unexploded (UXO) Sweep Personnel 29.28 30501 - Weather Forecaster I 30.31 30502 - Weather Forecaster II 36.87 30620 - Weather Observer, Combined Upper Air Or Surface Programs (see 2) 24.62 30621 - Weather Observer, Senior (see 2) 27.37

31000 - Transportation/Mobile Equipment Operation Occupations 31010 - Airplane Pilot 35.43 31020 - Bus Aide 19.47 31030 - Bus Driver 24.57 31043 - Driver Courier 17.32 31260 - Parking and Lot Attendant 14.06 31290 - Shuttle Bus Driver 16.24 31310 - Taxi Driver 12.36 31361 - Truckdriver, Light 18.42 31362 - Truckdriver, Medium 19.55 31363 - Truckdriver, Heavy 24.95 31364 - Truckdriver, Tractor-Trailer 24.95

99000 - Miscellaneous Occupations 99020 - Cabin Safety Specialist 17.27 99030 - Cashier 13.34 99050 - Desk Clerk 13.30 99095 - Embalmer 29.54 99130 - Flight Follower 29.28 99251 - Laboratory Animal Caretaker I 16.52 99252 - Laboratory Animal Caretaker II 17.57 99260 - Marketing Analyst 28.39 99310 - Mortician 29.54 99410 - Pest Controller 17.98 99510 - Photofinishing Worker 15.39 99710 - Recycling Laborer 22.88 99711 - Recycling Specialist 25.59 99730 - Refuse Collector 21.59 99810 - Sales Clerk 14.34 99820 - School Crossing Guard 17.53 99830 - Survey Party Chief 25.32 99831 - Surveying Aide 14.24 99832 - Surveying Technician 22.42 99840 - Vending Machine Attendant 17.45 99841 - Vending Machine Repairer 20.66 99842 - Vending Machine Repairer Helper 17.45

Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal Contractors, applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is the victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

Note: Executive Order 13658 generally applies to contracts subject to the Service Contract Act that were awarded on or between January 1, 2015 and January 29, 2022, and that have not been renewed or extended on or after January 30, 2022. If a contract is subject to Executive Order 13658, the contractor must pay all covered workers at least $13.65 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the con Additional information on contractor requirements and worker protections under Executive Order 13658 is available at www.dol.gov/whd/govcontracts.

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $5.55 per hour, up to 40 hours per week, or $222.00 per week or $962.00 per month

HEALTH & WELFARE EO 13706: $5.09 per hour, up to 40 hours per week, or $203.60 per week, or $882.27 per month*

*This rate is to be used only when compensating employees for performance on an SCA-covered contract also covered by EO 13706, Establishing Paid Sick Leave for Federal Contractors. A contractor may not receive credit toward its SCA obligations for any paid sick leave provided pursuant to EO 13706.

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor, 3 weeks after 10 years, and 4 weeks after 15 years. Length of service includes the whole span of continuous service with the present contractor or successor, wherever employed, and with the predecessor contractors in the performance of similar work at the same Federal facility. (See 29 CFR 4.173)

HOLIDAYS: A minimum of eleven paid holidays per year: New Year's Day, Martin Luther King Jr.'s Birthday, Washington's Birthday, Memorial Day, Juneteenth National Independence Day, Independence Day, Labor Day, Columbus Day, Veterans' Day, Thanksgiving Day, and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:

1) COMPUTER EMPLOYEES: This wage determination does not apply to any individual employed in a bona fide executive, administrative, or professional capacity, as defined in 29 C.F.R. Part 541. (See 41 C.F.R. 6701(3)). Because most Computer Systems Analysts and Computer Programmers who are paid at least $27.63 per hour (or at least $684 per week if paid on a salary or fee basis) likely qualify as exempt computer professionals under 29 U.S.C. 213(a)(1) and 29 U.S.C. 213(a)(17), this wage determination may not include wage rates for all occupations within those job families. In such instances, a conformance will be necessary if there are nonexempt employees in these job families working on the contract.

Job titles vary widely and change quickly in the computer industry, and are not determinative of whether an employee is an exempt computer professional. To be exempt, computer employees who satisfy the compensation requirements must also have a primary duty that consists of:

(1) The application of systems analysis techniques and procedures, including consulting with users, to determine hardware, software or system functional specifications;

(2) The design, development, documentation, analysis, creation, testing or modification of computer systems or programs, including prototypes, based on and related to user or system design specifications;

(3) The design, documentation, testing, creation or modification of computer programs related to machine operating systems; or

(4) A combination of the aforementioned duties, the performance of which requires the same level of skills. (29 C.F.R. 541.400).

Any computer employee who meets the applicable compensation requirements and the above duties test qualifies as an exempt computer professional under both section 13(a)(1) and section 13(a)(17) of the Fair Labor Standards Act. (Field Assistance Bulletin No. 2006-3 (Dec. 14, 2006)). Accordingly, this wage determination will not apply to any exempt computer employee regardless of which of these two exemptions is utilized.

2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If you work at night as part of a regular tour of duty, you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am.

If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek, you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime (i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work).

** HAZARDOUS PAY DIFFERENTIAL **

An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordnance, explosives, and incendiary materials. This includes work such as screening, blending, dying, mixing, and pressing of sensitive ordnance, explosives, and pyrotechnic compositions such as lead azide, black powder and photoflash powder.

All dry-house activities involving propellants or explosives. Demilitarization, modification, renovation, demolition, and maintenance operations on sensitive ordnance, explosives and incendiary materials. All operations involving re-grading and cleaning of artillery ranges.

A 4 percent differential is applicable to employees employed in a position that represents a low degree of hazard when working with, or in close proximity to ordnance, (or employees possibly adjacent to) explosives and incendiary materials which involves potential injury such as laceration of hands, face, or arms of the employee engaged in the operation, irritation of the skin, minor burns and the like;

minimal damage to immediate or adjacent work area or equipment being used. All operations involving, unloading, storage, and hauling of ordnance, explosive, and incendiary ordnance material other than small arms ammunition. These differentials are only applicable to work that has been specifically designated by the agency for ordnance, explosives, and incendiary material differential pay.

** UNIFORM ALLOWANCE **

If employees are required to wear uniforms in the performance of this contract (either by the terms of the Government contract, by the employer, by the state or local law, etc.), the cost of furnishing such uniforms and maintaining (by laundering or dry cleaning) such uniforms is an expense that may not be borne by an employee where such cost reduces the hourly rate below that required by the wage determination. The Department of Labor will accept payment in accordance with the following standards as compliance:

The contractor or…